Sotatapaturmalain muuttaminen, 2K

Puhe

Paliskuntain Yhdistys 14/7 1961

Kirje 14.7.1961

Säännöstelty huvi : suomalainen ravintola 1900-luvulla

Väitöskirja,Tampereen yliopisto

Onko EU:n perusoikeuskirjan oikeudellistaminen askel taaksepäin?

Euroopan unionin tulevaisuustyön perus- ja ihmisoikeuksiin keskittyneen työryhmä 2:n loppuraportti: Eurooppa-valmistelukunta, sihteeristö, Bryssel, 22.lokakuuta 2002, Conv 354/02, WG 16

International bioenergy trade- scenario study on international biomass market in 2020

The markets of biomass for energy are developing rapidly and becoming more international. A remarkable increase in the use of biomass for energy needs parallel and positive development in several areas, and there will be plenty of challenges to overcome. The main objective of the study was to clarify the alternative future scenarios for the international biomass market until the year 2020, and based on the scenario process, to identify underlying steps needed towards the vital working and sustainable biomass market for energy purposes. Two scenario processes were conducted for this study. The first was carried out with a group of Finnish experts and thesecond involved an international group. A heuristic, semi-structured approach, including the use of preliminary questionnaires as well as manual and computerised group support systems (GSS), was applied in the scenario processes.The scenario processes reinforced the picture of the future of international biomass and bioenergy markets as a complex and multi-layer subject. The scenarios estimated that the biomass market will develop and grow rapidly as well as diversify in the future. The results of the scenario process also opened up new discussion and provided new information and collective views of experts for the purposes of policy makers. An overall view resulting from this scenario analysis are the enormous opportunities relating to the utilisation of biomass as a resource for global energy use in the coming decades. The scenario analysis shows the key issues in the field: global economic growth including the growing need for energy, environmental forces in the global evolution, possibilities of technological development to solve global problems, capabilities of the international community to find solutions for global issues and the complex interdependencies of all these driving forces. The results of the scenario processes provide a starting point for further research analysing the technological and commercial aspects related the scenarios and foreseeing the scales and directions of biomass streams.

Experimental and Numerical Analysis of Different Volutes in a Centrifugal Compressor

In a centrifugal compressor the flow around the diffuser is collected and led to the pipe system by a spiral-shaped volute. In this study a single-stage centrifugal compressor with three different volutes is investigated. The compressorwas first equipped with the original volute, the cross-section of which was a combination of a rectangle and semi-circle. Next a new volute with a fully circular cross-section was designed and manufactured. Finally, the circular volute wasmodified by rounding the tongue and smoothing the tongue area. The overall performance of the compressor as well as the static pressure distribution after the impeller and on the volute surface were measured. The flow entering the volute was measured using a three-hole Cobra-probe, and flow visualisations were carriedout in the exit cone of the volute. In addition, the radial force acting on theimpeller was measured using magnetic bearings. The complete compressor with thecircular volute (inlet pipe, full impeller, diffuser, volute and outlet pipe) was also modelled using computational fluid dynamics (CFD). A fully 3-D viscous flow was solved using a Navier-Stokes solver, Finflo, developed at Helsinki University of Technology. Chien's k-e model was used to take account of the turbulence. The differences observed in the performance of the different volutes were quite small. The biggest differences were at low speeds and high volume flows,i.e. when the flow entered the volute most radially. In this operating regime the efficiency of the compressor with the modified circular volute was about two percentage points higher than with the other volutes. Also, according to the Cobra-probe measurements and flow visualisations, the modified circular volute performed better than the other volutes in this operating area. The circumferential static pressure distribution in the volute showed increases at low flow, constant distribution at the design flow and decrease at high flow. The non-uniform static pressure distribution of the volute was transmitted backwards across the vaneless diffuser and observed at the impeller exit. At low volume flow a strong two-wave pattern developed into the static pressure distribution at the impeller exit due to the response of the impeller to the non-uniformity of pressure. The radial force of the impeller was the greatest at the choke limit, the smallest atthe design flow, and moderate at low flow. At low flow the force increase was quite mild, whereas the increase at high flow was rapid. Thus, the non-uniformityof pressure and the force related to it are strong especially at high flow. Theforce caused by the modified circular volute was weaker at choke and more symmetric as a function of the volume flow than the force caused by the other volutes.