Einer grossen richtigen Land-Charte : das Nord- und Ostlichen Teil von Europa und Asia in so weit solches das ganze Russische Reich mit Sibirien der grossen Tartarey in sich begreiffet ...

Kartta kuuluu A. E. Nordenskiöldin kokoelmaan

Karta öfver Kung Karls Land upprättad under 1898 års svenska polarexpedition

Kartta kuuluu A. E. Nordenskiöldin kokoelmaan

M. Martin Helwigs erste Land-Charte vom Herzogthum Schlesien

Kartta kuuluu A. E. Nordenskiöldin kokoelmaan

Vem är jag, vem är vi, vem är vem i vårt land? : kontextens betydelse för gruppidentifikation och stereotypier bland svensk- och finskspråkiga i Finland och Sverige

Anna Henning-Lindblomin väitöskirja Vem är jag, vem är vi, vem är vem i vårt land? : kontextens betydelse för gruppidentifikation och stereotypier bland svensk- och finskspråkiga i Finland och Sverige (Helsingin yliopisto 2012).

Kalmarsund och Öland

Kartta kuuluu A. E. Nordenskiöldin kokoelmaan

Map of the United States and territories showing the extent of public surveys and military reservations, land grant R.R., rail roads, canals, and other details ...

Kartta kuuluu A. E. Nordenskiöldin kokoelmaan

Evaluating land-use related environmental impacts of biomass value chains for decision-support : Comparison and testing of methodologies proposed for environmental life cycle assessment

Life cycle assessment (LCA) is one of the most established quantitative tools for environmental impact assessment of products. To be able to provide support to environmentally-aware decision makers on environmental impacts of biomass value-chains, the scope of LCA methodology needs to be augmented to cover landuse related environmental impacts. This dissertation focuses on analysing and discussing potential impact assessment methods, conceptual models and environmental indicators that have been proposed to be implemented into the LCA framework for impacts of land use. The applicability of proposed indicators and impact assessment frameworks is tested from practitioners' perspective, especially focusing on forest biomass value chains. The impacts of land use on biodiversity, resource depletion, climate change and other ecosystem services is analysed and discussed and the interplay in between value choices in LCA modelling and the decision-making situations to be supported is critically discussed. It was found out that land use impact indicators are necessary in LCA in highlighting differences in impacts from distinct land use classes. However, many open questions remain on certainty of highlighting actual impacts of land use, especially regarding impacts of managed forest land use on biodiversity and ecosystem services such as water regulation and purification. The climate impact of energy use of boreal stemwood was found to be higher in the short term and lower in the long-term in comparison with fossil fuels that emit identical amount of CO2 in combustion, due to changes implied to forest C stocks. The climate impacts of energy use of boreal stemwood were found to be higher than the previous estimates suggest on forest residues and stumps. The product lifetime was found to have much higher influence on the climate impacts of woodbased value chains than the origin of stemwood either from thinnings or final fellings. Climate neutrality seems to be likely only in the case when almost all the carbon of harvested wood is stored in long-lived wooden products. In the current form, the land use impacts cannot be modelled with a high degree of certainty nor communicated with adequate level of clarity to decision makers. The academia needs to keep on improving the modelling framework, and more importantly, clearly communicate to decision-makers the limited certainty on whether land-use intensive activities can help in meeting the strict mitigation targets we are globally facing.

[Topografičeskaâ karta 1:42000]. XI-39, XI-40, X-39, X-40, Vyborg. i Nûland. gub.

[1:42000].

[Topografičeskaâ karta 1:42000]. IX-37, IX-38, Finl. Nûland. i Vyborg. gub., Finl. Vyborgs. gub.

1:42000.

Implementatiоn оf Sustainability-Оriented Innоvatiоns in Business - Studying Оrganizatiоnal and External Capabilities: Evidence frоm Pоland

The cоncept оf sustainability-оriented innоvatiоn is recent and still under researched. The aim оf the Thesis is tо cоntribute tо the field and investigate hоw dо cоmpanies оperating in Pоland apply sustainability-оriented innоvatiоn (SОI) tо their cоre business activities, what are the differences between variоus business fоrms оf оrganizatiоn in terms оf SОI, and what type оf capabilities facilitate implementatiоn оf SОI. Given early stage оf empirical research оn sustainability-оriented innоvatiоn, an explоratоry-descriptive case study research strategy was taken applying qualitative methоds. 6 interviews with managers and CEОs оf 4 cоmpanies lоcated in Warsaw were cоnducted. In additiоn, twо academic expert panels with specialists frоm University оf Lоdz and Lappeenranta University оf Technоlоgy were carried оut in оrder tо suppоrt the findings. The study fоund оut that in case оf cоmpanies which purpоse is tо create pоsitive impact and develоp sustainable prоducts оr services by using innоvative apprоaches, SОI activities are embedded in оrganizatiоnal culture and prоcess sо that it is difficult tо differentiate between main business activities and SОI. In the оther twо cases SОI practices were in line with cоre business activities thus reflected the main оperatiоns and were determined as a part оf CSR strategy. Activities are industry specific and are cоntingent upоn resоurces and capabilities pоssessed. Amоng list оf success factоrs management suppоrt, CEО’s persоnal values, dedicated and mоtivated team, investments in research and develоpment, оrganizatiоnal culture, nоn-hierarchical cоmmunicatiоns channels, empоwerment оf emplоyees, prоvisiоn оf time and space fоr failures were identified as key оrganizatiоnal capabilities facilitating integratiоn оf SОI practices. Whereas market demand, NGОs’ pressure, regulatiоns enfоrced, access tо external funding, netwоrking and cооperating present external оr cоllabоrative capabilities suppоrting implementatiоn оf sustainability оriented innоvatiоn in cоmpanies. SОI takes a systemic apprоach that drives the transfоrmatiоn tо becоme sustainable business embedding and integrating sоcial, envirоnmental and ecоnоmic value creatiоn tоgether.

Feasibility of industrial implementation of laser cutting into paper making machine

Laser cutting implementation possibilities into paper making machine was studied as the main objective of the work. Laser cutting technology application was considered as a replacement tool for conventional cutting methods used in paper making machines for longitudinal cutting such as edge trimming at different paper making process and tambour roll slitting. Laser cutting of paper was tested in 70’s for the first time. Since then, laser cutting and processing has been applied for paper materials with different level of success in industry. Laser cutting can be employed for longitudinal cutting of paper web in machine direction. The most common conventional cutting methods include water jet cutting and rotating slitting blades applied in paper making machines. Cutting with CO2 laser fulfils basic requirements for cutting quality, applicability to material and cutting speeds in all locations where longitudinal cutting is needed. Literature review provided description of advantages, disadvantages and challenges of laser technology when it was applied for cutting of paper material with particular attention to cutting of moving paper web. Based on studied laser cutting capabilities and problem definition of conventional cutting technologies, preliminary selection of the most promising application area was carried out. Laser cutting (trimming) of paper web edges in wet end was estimated to be the most promising area where it can be implemented. This assumption was made on the basis of rate of web breaks occurrence. It was found that up to 64 % of total number of web breaks occurred in wet end, particularly in location of so called open draws where paper web was transferred unsupported by wire or felt. Distribution of web breaks in machine cross direction revealed that defects of paper web edge was the main reason of tearing initiation and consequent web break. The assumption was made that laser cutting was capable of improvement of laser cut edge tensile strength due to high cutting quality and sealing effect of the edge after laser cutting. Studies of laser ablation of cellulose supported this claim. Linear energy needed for cutting was calculated with regard to paper web properties in intended laser cutting location. Calculated linear cutting energy was verified with series of laser cutting. Practically obtained laser energy needed for cutting deviated from calculated values. This could be explained by difference in heat transfer via radiation in laser cutting and different absorption characteristics of dry and moist paper material. Laser cut samples (both dry and moist (dry matter content about 25-40%)) were tested for strength properties. It was shown that tensile strength and strain break of laser cut samples are similar to corresponding values of non-laser cut samples. Chosen method, however, did not address tensile strength of laser cut edge in particular. Thus, the assumption of improving strength properties with laser cutting was not fully proved. Laser cutting effect on possible pollution of mill broke (recycling of trimmed edge) was carried out. Laser cut samples (both dry and moist) were tested on the content of dirt particles. The tests revealed that accumulation of dust particles on the surface of moist samples can take place. This has to be taken into account to prevent contamination of pulp suspension when trim waste is recycled. Material loss due to evaporation during laser cutting and amount of solid residues after cutting were evaluated. Edge trimming with laser would result in 0.25 kg/h of solid residues and 2.5 kg/h of lost material due to evaporation. Schemes of laser cutting implementation and needed laser equipment were discussed. Generally, laser cutting system would require two laser sources (one laser source for each cutting zone), set of beam transfer and focusing optics and cutting heads. In order to increase reliability of system, it was suggested that each laser source would have double capacity. That would allow to perform cutting employing one laser source working at full capacity for both cutting zones. Laser technology is in required level at the moment and do not require additional development. Moreover, capacity of speed increase is high due to availability high power laser sources what can support the tendency of speed increase of paper making machines. Laser cutting system would require special roll to maintain cutting. The scheme of such roll was proposed as well as roll integration into paper making machine. Laser cutting can be done in location of central roll in press section, before so-called open draw where many web breaks occur, where it has potential to improve runability of a paper making machine. Economic performance of laser cutting was done as comparison of laser cutting system and water jet cutting working in the same conditions. It was revealed that laser cutting would still be about two times more expensive compared to water jet cutting. This is mainly due to high investment cost of laser equipment and poor energy efficiency of CO2 lasers. Another factor is that laser cutting causes material loss due to evaporation whereas water jet cutting almost does not cause material loss. Despite difficulties of laser cutting implementation in paper making machine, its implementation can be beneficial. The crucial role in that is possibility to improve cut edge strength properties and consequently reduce number of web breaks. Capacity of laser cutting to maintain cutting speeds which exceed current speeds of paper making machines what is another argument to consider laser cutting technology in design of new high speed paper making machines.

Impacts of increased levels of wind penetration on the Electric Power System of the Åland Islands

The application of VSC-HVDC technology throughout the world has turned out to be an efficient solution regarding a large share of wind power in different power systems. This technology enhances the overall reliability of the grid by utilization of the active and reactive power control schemes which allows to maintain frequency and voltage on busbars of the end-consumers at the required level stated by the network operator. This master’s thesis is focused on the existing and planned wind farms as well as electric power system of the Åland Islands. The goal is to analyze the wind conditions of the islands and appropriately predict a possible production of the existing and planned wind farms with a help of WAsP software program. Further, to investigate the influence of increased wind power it is necessary to develop a simulation model of the electric grid and VSC-HVDC system in PSCAD and examine grid response to different wind power production cases with respect to the grid code requirements and ensure the stability of the power system.

Finlands geografi: handbok för medborgare : på uppdrag af Finska litteratur-sällskapet - 1, Allmän öfverblick af land och folk

Ilmestynyt kolmena vihkona.