Weldability of high strength aluminium alloys

The need for reduced intrinsic weight of structures and vehicles in the transportation industry has made aluminium research of interest. Aluminium has properties that are favourable for structural engineering, including good strength-to-weight ratio, corrosion resistance and machinability. It can be easily recycled saving energy used in smelting as compared to steel. Its alloys can have ultimate tensile strength of up to 750 MPa, which is comparable to steel. Aluminium alloys are generally weldable, however welding of high strength alloys like the 7xxx series pose considerable challenges. This paper presents research on the weldability of high strength aluminium alloys, principally the 7xxx series. The weldability with various weld processes including MIG, TIG, and FSW, is discussed in addition to consideration of joint types, weld defects and recommendations for minimizing or preventing weld defects. Experimental research was carried out on 7025-T6 and AW-7020 alloys. Samples were welded, and weld cross sections utilized in weld metallurgy studies. Mechanical tests were carried out including hardness tests and tensile tests. In addition, testing was done for the presence of Al2O3 on exposed aluminium alloy. It was observed that at constant weld heat input using a pulsed MIG system, the welding speed had little or no effect on the weld hardness. However, the grain size increased as the filler wire feed rate, welding current and welding speed increased. High heat input resulted in lower hardness of the weld profile. Weld preheating was detrimental to AW- 7020 welds; however, artificial aging was beneficial. Acceptable welds were attained with pulsed MIG without the removal of the Al2O3 layer prior to welding. The Al2O3 oxide layer was found to have different compositions in different aluminium alloys. These findings contribute useful additional information to the knowledge base of aluminium welding. The application of the findings of this study in welding will help reduce weld cost and improve high strength aluminium structure productivity by removing the need for pre-weld cleaning. Better understanding of aluminium weld metallurgy equips weld engineers with information for better aluminium weld design.

Climate change and global responsibility - the role of energy consumption, GDP and CO2 emissions

Climate change is one of the biggest challenges faced by this generation. Despite being the single most important environmental challenge facing the planet and despite over two decades of international climate negotiations, global greenhouse gas (GHG) emissions continue to rise. By the middle of this century, GHGs must be reduced by as much as 40-70% if dangerous climate change is to be avoided. In the Kyoto Protocol no quantitative emission limitation and reduction commitments were placed on the developing countries. For the planning of the future commitments period and possible participation of developing countries, information of the functioning of the energy systems, CO2 emissions development in different sectors, energy use and technological development in developing countries is essential. In addition to the per capita emissions, the efficiency of the energy system in relation to GHG emissions is crucial for the decision of future long-term burden sharing between countries. Country’s future development of CO2 emissions can be defined by the estimated CO2 intensity of the future and the estimated GDP growth. The changes in CO2 intensity depend on several factors, but generally developed countries’ intensity has been increasing in the industrialization phase and decreasing when their economy shifts more towards the system dominated by the service sector. The level of the CO2 intensity depends by a large extent on the production structure and the energy sources that are used. Currently one of the most urgent issues regarding global climate change is to decide the future of the Kyoto Protocol. Negotiations on this topic have already been initiated, with the aim of being finalised by the 2015. This thesis provides insights into the various approaches that can be used to characterise the concept of comparable efforts for developing countries in a future international climate agreement. The thesis examines the post-Kyoto burden sharing questions for developing countries using the contraction and convergence model, which is one approach that has been proposed to allocate commitments regarding future GHG emissions mitigation. This new approach is a practical tool for the evaluation of the Kyoto climate policy process and global climate change negotiations from the perspective of the developing countries.

Business intelligence – enabling self-service: A case study in a global manufacturing company

Business intelligence (BI) is an information process that includes the activities and applications used to transform business data into valuable business information. Today’s enterprises are collecting detailed data which has increased the available business data drastically. In order to meet changing customer needs and gain competitive advantage businesses try to leverage this information. However, IT departments are struggling to meet the increased amount of reporting needs. Therefore, recent shift in the BI market has been towards empowering business users with self-service BI capabilities. The purpose of this study was to understand how self-service BI could help businesses to meet increased reporting demands. The research problem was approached with an empirical single case study. Qualitative data was gathered with a semi-structured, theme-based interview. The study found out that case company’s BI system was mostly used for group performance reporting. Ad-hoc and business user-driven information needs were mostly fulfilled with self-made tools and manual work. It was felt that necessary business information was not easily available. The concept of self-service BI was perceived to be helpful to meet such reporting needs. However, it was found out that the available data is often too complex for an average user to fully understand. The respondents felt that in order to self-service BI to work, the data has to be simplified and described in a way that it can be understood by the average business user. The results of the study suggest that BI programs struggle in meeting all the information needs of today’s businesses. The concept of self-service BI tries to resolve this problem by allowing users easy self-service access to necessary business information. However, business data is often complex and hard to understand. Self-serviced BI has to overcome this challenge before it can reach its potential benefits.

Business intelligence – enabling self-service: A case study in a global manufacturing company

Business intelligence (BI) is an information process that includes the activities and applications used to transform business data into valuable business information. Today’s enterprises are collecting detailed data which has increased the available business data drastically. In order to meet changing customer needs and gain competitive advantage businesses try to leverage this information. However, IT departments are struggling to meet the increased amount of reporting needs. Therefore, recent shift in the BI market has been towards empowering business users with self-service BI capabilities. The purpose of this study was to understand how self-service BI could help businesses to meet increased reporting demands. The research problem was approached with an empirical single case study. Qualitative data was gathered with a semi-structured, theme-based interview. The study found out that case company’s BI system was mostly used for group performance reporting. Ad-hoc and business user-driven information needs were mostly fulfilled with self-made tools and manual work. It was felt that necessary business information was not easily available. The concept of self-service BI was perceived to be helpful to meet such reporting needs. However, it was found out that the available data is often too complex for an average user to fully understand. The respondents felt that in order to self-service BI to work, the data has to be simplified and described in a way that it can be understood by the average business user. The results of the study suggest that BI programs struggle in meeting all the information needs of today’s businesses. The concept of self-service BI tries to resolve this problem by allowing users easy self-service access to necessary business information. However, business data is often complex and hard to understand. Self-serviced BI has to overcome this challenge before it can reach its potential benefits.