Software product line for power converters

Työn tilaajana toimi Visedo Oy. Työn tavoitteina oli tutkia Visedo Oy:n ohjelmistokehityksen nykytila, tunnistaa seuraavat parannuskohteet ja antaa ohjeita havaittujen parannuskohteiden korjaamiseksi. Visedo Oy:n tehonmuokkain ohjelmistokehityksen nykytilaa käsiteltiin neljän valitun osa-alueen näkökulmasta: ohjelmistoarkkitehtuurityyli, komponenttipohjainen ohjelmistokehitys, ohjelmistotuotelinjojen kehitysmenetelmät ja ohjelmistovariaatioiden hallinta. Valituilla osa-alueilla havaittujen parannuskohteiden perusteella annettiin korjausehdotuksia: ohjelmistoarkkitehtuurin rakenteeseen, komponenttien jakautumiselle, komponenttien koostamiselle ja komponenttien versioinnille. Lisäksi ehdotettiin uudenlaista ohjelmistotuotelinja rakennetta, joka yhdistää kerros- ja komponenttipohjaiset arkkitehtuurityylit mahdollistaen ominaisuuksiltaan eroavien tehonmuokkain ohjelmistojen hallinnan.

LVDC power distribution system: computational modelling

In the doctoral dissertation, low-voltage direct current (LVDC) distribution system stability, supply security and power quality are evaluated by computational modelling and measurements on an LVDC research platform. Computational models for the LVDC network analysis are developed. Time-domain simulation models are implemented in the time-domain simulation environment PSCAD/EMTDC. The PSCAD/EMTDC models of the LVDC network are applied to the transient behaviour and power quality studies. The LVDC network power loss model is developed in a MATLAB environment and is capable of fast estimation of the network and component power losses. The model integrates analytical equations that describe the power loss mechanism of the network components with power flow calculations. For an LVDC network research platform, a monitoring and control software solution is developed. The solution is used to deliver measurement data for verification of the developed models and analysis of the modelling results. In the work, the power loss mechanism of the LVDC network components and its main dependencies are described. Energy loss distribution of the LVDC network components is presented. Power quality measurements and current spectra are provided and harmonic pollution on the DC network is analysed. The transient behaviour of the network is verified through time-domain simulations. DC capacitor guidelines for an LVDC power distribution network are introduced. The power loss analysis results show that one of the main optimisation targets for an LVDC power distribution network should be reduction of the no-load losses and efficiency improvement of converters at partial loads. Low-frequency spectra of the network voltages and currents are shown, and harmonic propagation is analysed. Power quality in the LVDC network point of common coupling (PCC) is discussed. Power quality standard requirements are shown to be met by the LVDC network. The network behaviour during transients is analysed by time-domain simulations. The network is shown to be transient stable during large-scale disturbances. Measurement results on the LVDC research platform proving this are presented in the work.

International Partnering strategy for e-learning provider in emerging economies: Evidence from East Africa learning institutions

International partnership has received growing interest in the literature during the past decades due to globalization, increased technological approaches and rapid changes in competitive environments. The study specifically determines the support provided by international partners on promotion of e-learning in East Africa, assess the motives of partner selection criteria, the determinants of selecting partners, partner models and partner competence of e-learning provider. The study also evaluates obstacles of e-learning partnering strategy in East Africa learning institutions. The research adopts a descriptive survey design. Target population involved East Africa learning institutions with a list of potential institutions generated from the Ministry of Higher Education database. Through a targeted reduction of the initial database, consisting of all learning institutions, both public and private, the study created a target sample base of 200 learning institutions. Structured questionnaires scheduled were used to collect primary data. Study findings showed the approach way East African communities in selecting their e-learning partners depend on international reputation of partners, partner with ability to negotiate with foreign governments, partner with international and local experiences, nationality of foreign partner and partners with local market knowledge.

Achieving EU energy targets – Impacts of evolutionary and revolutionary transition paths on power systems

Ambitious energy targets set by EU put pressures to increase share of renewable electricity supply in this and next decades and therefore, some EU member countries have boosted increasing renewable energy generation capacity by implementing subsidy schemes on national level. In this study, two different change approaches to increase renewable energy supply and increase self-sufficiency of supply are assessed with respect to their impacts on power system, electricity market and electricity generation costs in Finland. It is obtained that the current electricity generation costs are high compared to opportunities of earnings from present-day investor’s perspective. In addition, the growth expectations of consumptions and the price forecasts do not stimulate investing in new generation capacity. Revolutionary transition path is driven by administrative and political interventions to achieve the energy targets. Evolutionary transition path is driven by market-based mechanisms, such as market itself and emission trading scheme. It is obtained in this study that in the revolutionary transition path operation of market-based mechanisms is distorted to some extent and it is likely that this path requires providing more public financial resources compared to evolutionary transition path. In the evolutionary transition path the energy targets are not achieved as quickly but market-based mechanisms function better and investment environment endures more stable compared to revolutionary transition path.

The improvement of enclosure protection class of power electronics device

Tässä diplomityössä tutkittiin vaihtoehtoja tehoelektroniikkalaitteiden kotelointiluokan kehittämiseksi. Haasteena paremman suojauksen suunnittelussa on laitteiden tuottama suuri määrä lämpöä, joka vaatii tehokkaan jäähdytyksen. Työn tuloksena saatu prototyyppi IP33 luokkaa varten täyttää standardissa SFS-EN 60529+A1 asetetut vaatimukset kyseiselle kotelointiluokalle. Rakenteessa ja valmistettavuudessa havaittiin muutama ongelma, jotka ovat korjattavissa pienillä muutoksilla. Korkeampia suojausluokkia varten testattiin IP54-luokiteltujen filtterituulettimien vaikutusta laitteen jäähdytykseen. Testien perusteella jäähdytysteho on riittävä ja filtterituulettimet todettiin toimivaksi ratkaisuksi korkeammille suojausluokille. Työn perusteella voidaan todeta, että nykyiset laitteet voidaan muokata vastaamaan IP33 luokan vaatimuksia kohtuullisen pienillä muutoksilla. Tätä korkeammat suojausluokat vaatisivat niin suuria muutoksia designiin, että todennäköisesti täysin uuden laitteen suunnittelu olis kannattavin vaihtoehto.

Comparison study of two competing models of an all mechanical power transmission system

A comparison between two competing models of an all mechanical power transmission system is studied by using Dymola –software as the simulation tool. This tool is compared with Matlab/ Simulink –software by using functionality, user-friendliness and price as comparison criteria. In this research we assume that the torque is balanceable and transmission ratios are calculated. Using kinematic connection sketches of the two transmission models, simulation models are built into the Dymola simulation environment. Models of transmission systems are modified according to simulation results to achieve a continuous variable transmission ratio. Simulation results are compared between the two transmission systems. The main features of Dymola and MATLAB/ Simulink are compared. Advantages and disadvantages of the two softwares are analyzed and compared.

Cooperative strategy in emerging markets - analysis of interfirm r&d cooperation and performance in Russian manufacturing companies

Emerging markets have come to play a significant role in the world, not only due to their strong economic growth but because they have been able to foster an increasing number of innovative high technology oriented firms. However, as the markets continue to change and develop, there remain many companies in emerging markets that struggle with their competitiveness and innovativeness. To improve competitive capabilities, many scholars have come to favor interfirm cooperation, which is perceived to help companies access new knowledge and complementary resources and, by so doing, enables them to catch up quickly with Western competitors. Regardless of numerous attempts by strategic management scholars, the research field remains very fragmented and lacks understanding on how and when interfirm cooperation contributes to firm performance and competiveness in emerging markets. Furthermore, the reasons why interfirm R&D sometimes succeeds but fails at other times frequently remain unidentified. This thesis combines the extant literature on competitive and cooperative strategy, dynamic capabilities, and R&D cooperation while studying interfirm R&D relationships in and between Russian manufacturing companies. Employing primary survey data, the thesis presents numerous novel findings regarding the effect of R&D cooperation and different types of R&D partner on firms’ exploration and exploitation performance. Utilizing a competitive strategy framework enables these effects to be explained in more detail, and especially why interfirm cooperation, regardless of its potential, has had a modest effect on the general competitiveness of emerging market firms. This thesis contributes especially to the strategic management literature and presents a more holistic perspective on the usefulness of cooperative strategy in emerging markets. It provides a framework through which it is possible to assess the potential impacts of different R&D cooperation partners and to clarify the causal relationships between cooperation, performance, and long term competitiveness.

Minimizing Conducted RF-Emissions in Switch Mode Power Supplies Using Spread-Spectrum Techniques

Switching power supplies are usually implemented with a control circuitry that uses constant clock frequency turning the power semiconductor switches on and off. A drawback of this customary operating principle is that the switching frequency and harmonic frequencies are present in both the conducted and radiated EMI spectrum of the power converter. Various variable-frequency techniques have been introduced during the last decade to overcome the EMC problem. The main objective of this study was to compare the EMI and steady-state performance of a switch mode power supply with different spread-spectrum/variable-frequency methods. Another goal was to find out suitable tools for the variable-frequency EMI analysis. This thesis can be divided into three main parts: Firstly, some aspects of spectral estimation and measurement are presented. Secondly, selected spread spectrum generation techniques are presented with simulations and background information. Finally, simulations and prototype measurements from the EMC and the steady-state performance are carried out in the last part of this work. Combination of the autocorrelation function, the Welch spectrum estimate and the spectrogram were used as a substitute for ordinary Fourier methods in the EMC analysis. It was also shown that the switching function can be used in preliminary EMC analysis of a SMPS and the spectrum and autocorrelation sequence of a switching function correlates with the final EMI spectrum. This work is based on numerous simulations and measurements made with the prototype. All these simulations and measurements are made with the boost DC/DC converter. Four different variable-frequency modulation techniques in six different configurations were analyzed and the EMI performance was compared to the constant frequency operation. Output voltage and input current waveforms were also analyzed in time domain to see the effect of the spread spectrum operation on these quantities. According to the results presented in this work, spread spectrum modulation can be utilized in power converter for EMI mitigation. The results from steady-state voltage measurements show, that the variable-frequency operation of the SMPS has effect on the voltage ripple, but the ripple measured from the prototype is still acceptable in some applications. Both current and voltage ripple can be controlled with proper main circuit and controller design.

Potential and Challenges of Analog Reconfigurable Computation in Modern and Future CMOS

In this work, the feasibility of the floating-gate technology in analog computing platforms in a scaled down general-purpose CMOS technology is considered. When the technology is scaled down the performance of analog circuits tends to get worse because the process parameters are optimized for digital transistors and the scaling involves the reduction of supply voltages. Generally, the challenge in analog circuit design is that all salient design metrics such as power, area, bandwidth and accuracy are interrelated. Furthermore, poor flexibility, i.e. lack of reconfigurability, the reuse of IP etc., can be considered the most severe weakness of analog hardware. On this account, digital calibration schemes are often required for improved performance or yield enhancement, whereas high flexibility/reconfigurability can not be easily achieved. Here, it is discussed whether it is possible to work around these obstacles by using floating-gate transistors (FGTs), and analyze problems associated with the practical implementation. FGT technology is attractive because it is electrically programmable and also features a charge-based built-in non-volatile memory. Apart from being ideal for canceling the circuit non-idealities due to process variations, the FGTs can also be used as computational or adaptive elements in analog circuits. The nominal gate oxide thickness in the deep sub-micron (DSM) processes is too thin to support robust charge retention and consequently the FGT becomes leaky. In principle, non-leaky FGTs can be implemented in a scaled down process without any special masks by using “double”-oxide transistors intended for providing devices that operate with higher supply voltages than general purpose devices. However, in practice the technology scaling poses several challenges which are addressed in this thesis. To provide a sufficiently wide-ranging survey, six prototype chips with varying complexity were implemented in four different DSM process nodes and investigated from this perspective. The focus is on non-leaky FGTs, but the presented autozeroing floating-gate amplifier (AFGA) demonstrates that leaky FGTs may also find a use. The simplest test structures contain only a few transistors, whereas the most complex experimental chip is an implementation of a spiking neural network (SNN) which comprises thousands of active and passive devices. More precisely, it is a fully connected (256 FGT synapses) two-layer spiking neural network (SNN), where the adaptive properties of FGT are taken advantage of. A compact realization of Spike Timing Dependent Plasticity (STDP) within the SNN is one of the key contributions of this thesis. Finally, the considerations in this thesis extend beyond CMOS to emerging nanodevices. To this end, one promising emerging nanoscale circuit element - memristor - is reviewed and its applicability for analog processing is considered. Furthermore, it is discussed how the FGT technology can be used to prototype computation paradigms compatible with these emerging two-terminal nanoscale devices in a mature and widely available CMOS technology.

From emerging opportunities to successful business networks – evidence from bioenergy

Increasing renewable energy utilization is a challenge that is tried to be solved in different ways. One of the most promising options for renewable energy is different biomasses, and the bioenergy field offers numerous emerging business opportunities. The actors in the field have rarely all the needed know-how and resources for exploiting these opportunities, and thus it is reasonable to seize them in cooperation. Networking is not an easy task to carry out, however, and in addition to its advantages for the firms engaged, it sets numerous challenges as well. The development of a network is a result of several steps firms need to take. In order to gain optimal advantage of their networks, firms need to weigh out with whom, why and how they should cooperate. In addition, everything does not depend on the firms themselves, as several factors in the external environment set their own enablers and barriers for cooperation. The formation of a network around a business opportunity is thus a multiphase process. The objective of this thesis is to depict this process via a step-by-step analysis and thus increase understanding on the whole development path from an entrepreneurial opportunity to a successful business network. The empirical evidence has been gathered by discussing the opportunities of animal manure refinement to biogas and forest biomass utilization for heating in Finland. The thesis comprises two parts. The first part provides an overview of the study, and the second part includes five research publications. The results reveal that it is essential to identify and analyze all the steps in the development process of a network, and several frameworks are used in the thesis to analyze these steps. The frameworks combine the views of theory and practical experiences of empirical study, and thus give new multifaceted views for the discussion on SME networking. The results indicate that the ground for cooperation should be investigated adequately by taking account of the preconditions in all the three contexts in which the actors operate: the social context, the region and the institutional environment. In case the project advances to exploitation, the assets and objectives of the actors should be paired off, which sets a need for relationships and sub-networks differing in breadth and depth. Different relationships and networks require different kinds of maintenance and management. Moreover, the actors should have the capability to change the formality or strategy of the relationships if needed. The drivers for these changes come along with the changing environment, which causes changes in the objectives of the actors and this way in the whole network. Bioenergy as the empirical field of the study represents well an industrial field with many emerging opportunities, a motley group of actors, and sensitivity for fast changes.

Promoting Cleantech in Emerging Markets: Business Model for Waste Pre-treatment Equipment in China

Waste incineration is becoming increasingly widespread method of waste disposal in China. Incineration plants mostly use grate and circular fluidized bed (CFB) technology. Waste combustion in cement production is also beginning to gradually increase. However, Chinese waste composition is causing problems for the energy utilization. Mechanical waste pre-treatment optimizes the combustion process and facilitates the energy recovery. The objective of this study is to identify how Western waste pre-treatment manufacturer could operate in Chinese markets. Chinese waste management industry is reviewed via PESTEL analysis. The current state and future predictions of grate and CFB incineration as well as cement manufacturing are monitored. Grate combustion, which requires lesser waste pre-treatment, is becoming more common at the expense of CFB incineration in China. The most promising future for waste treatment is in cement production industry. Waste treatment equipment manufacturer should try to create pilot projects with biggest cement producers with a view of growing co-operation in the future.

Defining the keyhole modes – the effects on the weld geometry and the molten pool behaviour in high power laser welding of stainless steels

Keyhole welding, meaning that the laser beam forms a vapour cavity inside the steel, is one of the two types of laser welding processes and currently it is used in few industrial applications. Modern high power solid state lasers are becoming more used generally, but not all process fundamentals and phenomena of the process are well known and understanding of these helps to improve quality of final products. This study concentrates on the process fundamentals and the behaviour of the keyhole welding process by the means of real time high speed x-ray videography. One of the problem areas in laser welding has been mixing of the filler wire into the weld; the phenomena are explained and also one possible solution for this problem is presented in this study. The argument of this thesis is that the keyhole laser welding process has three keyhole modes that behave differently. These modes are trap, cylinder and kaleidoscope. Two of these have sub-modes, in which the keyhole behaves similarly but the molten pool changes behaviour and geometry of the resulting weld is different. X-ray videography was used to visualize the actual keyhole side view profile during the welding process. Several methods were applied to analyse and compile high speed x-ray video data to achieve a clearer image of the keyhole side view. Averaging was used to measure the keyhole side view outline, which was used to reconstruct a 3D-model of the actual keyhole. This 3D-model was taken as basis for calculation of the vapour volume inside of the keyhole for each laser parameter combination and joint geometry. Four different joint geometries were tested, partial penetration bead on plate and I-butt joint and full penetration bead on plate and I-butt joint. The comparison was performed with selected pairs and also compared all combinations together.

Between Memory and Strategy: Media Discourse Analysis of an Industrial Shutdown

In 2006 UPM was able to gain a level of social legitimacy that allowed it to carry out one of the largest industrial restructuring programmes in Finnish industrial history, shut down major operations in Finland and still appear to be functioning in the interests of the nation as well as itself. This study considers and examines various contexts of this shutdown with the aim of demonstrating how profoundly mediated such organizational events are though they appear to be produced primarily through strategic company decisions. The study aims to examine the processes of mediation at two levels. At one level, through close analysis of press releases and newspaper reports in local and national newspapers, the study presents a discursive analysis of the Voikkaa case. The discursive analysis focuses on providing historical contexts for understanding why this organizational event was also an occasion for reimagining the past and future of the Finnish nation; spatial contexts for understanding the differing struggles over the meaning of the event nationally and regionally; and the temporal dynamics of the media reports. At another level, the study considers and refines methods for reading and analyzing mediation in organization studies. Bringing together recent research of media text–based legitimation studies, emerging research on organizational memory and organizational death and a Foucaultian analytics of power, this work suggests that organizational research needs to be less concerned with particular typologies and narratives of shutdowns, and more curious about the processes of mediation through which organizational events are imagined and remembered.

Comparison of Different Concentrated Solar Power Collector Designs and Development of a Linear Fresnel Solar Collector Model

Concentrated solar power (CSP) is a renewable energy technology, which could contribute to overcoming global problems related to pollution emissions and increasing energy demand. CSP utilizes solar irradiation, which is a variable source of energy. In order to utilize CSP technology in energy production and reliably operate a solar field including thermal energy storage system, dynamic simulation tools are needed in order to study the dynamics of the solar field, to optimize production and develop control systems. The object of this Master’s Thesis is to compare different concentrated solar power technologies and configure a dynamic solar field model of one selected CSP field design in the dynamic simulation program Apros, owned by VTT and Fortum. The configured model is based on German Novatec Solar’s linear Fresnel reflector design. Solar collector components including dimensions and performance calculation were developed, as well as a simple solar field control system. The preliminary simulation results of two simulation cases under clear sky conditions were good; the desired and stable superheated steam conditions were maintained in both cases, while, as expected, the amount of steam produced was reduced in the case having lower irradiation conditions. As a result of the model development process, it can be concluded, that the configured model is working successfully and that Apros is a very capable and flexible tool for configuring new solar field models and control systems and simulating solar field dynamic behaviour.

Peruskoulun yläkouluvalinnat Turussa. Perheiden yläkouluvalintojen rakentuminen äitien puheissa ja toimissa

Tutkimuksessa tarkastellaan peruskoulun yläkouluvalintoja Turussa. Tarkastelun keskiössä ovat vuonna 1997 syntyneiden turkulaislasten vanhempien yläkouluvalintaa koskeva yleinen sekä omaan lapseen kiinnittyvä puhe ja toimijuus paikallisessa institutionaalisessa kouluvalintatilassa sekä vanhempien lapsen koulutukseen ja kouluvalintaan liittämät perustelut, merkitykset, arvot ja arvostukset. Tämän lisäksi tutkimuksessa tarkastellaan puheesta ja toimista rakentuvia perheiden kouluvalintastrategioita, joita peilataan äitien koulutuksellisiin ja sosiaalisiin resursseihin sekä paikalliseen toimintapolitiikkaan. Tutkimus ei kerro ainoastaan paikallisessa kontekstissa tapahtuvista kouluvalinnoista, vaan laajemmin yhteiskunnassa vallitsevista hierarkioista ja arvoista sekä koulutukseen ja sosioekonomiseen asemaan linkittyvistä normatiivisista toimintatavoista. Tutkimuksessa käytetään haastattelu- ja kyselyaineistoja. Aineistot kerättiin osana kahta laajempaa Suomen Akatemian rahoittamaa Helsingin ja Turun yliopistojen kanssa yhteistyössä tehtyä tutkimusprojektia Vanhemmat ja kouluvalinta – Perheiden koulutusstrategiat, eriarvoistuminen ja paikalliset koulupolitiikat suomalaisessa peruskoulussa (VAKOVA) 2009–2012 sekä Parents and School Choice. Family Strategies, Segregation and School Policies in Chilean and Finnish Basic Schooling (PASC) 2010–2013. Tutkimusaineistot koostuvat 87 turkulaisäidin haastattelusta ja kyselyaineistosta. Kyselyaineiston analyysissä on käytetty kuvailevia tilastollisia menetelmiä, ja sitä käytetään ensisijaisesti taustoittamaan haastatteluaineistoa. Haastatteluaineiston analyysi perustuu pääasiallisesti teema-analyysiin, mutta toimija-asema-analyysin osalta myös diskursiiviseen lähestymistapaan. Haastatteluaineiston pohjalta esiin nousseiden lasten koulutusta ja kouluvalintoja koskevien kuvausten perusteella perheiden yläkouluvalinnat jaettiin kolmeen erityyppiseen valintastrategiaan: perinteiseen lähikouluvalintastrategiaan (n=41), ambivalenttiseen kouluvalintastrategiaan (n=23) ja päämäärätietoiseen kouluvalintastrategiaan (n=23). Jokainen kolmesta strategiasta piti sisällään kahdenlaista toimijuutta kouluvalintakentällä. Ryhmittely kouluvalintastrategioittain ja toimija-asemittain perustui äitien puhetapaan kouluvalinnoista ja yleisemmin koulutukseen liitetyistä merkityksistä ja arvoista sekä konkreettiseen toimintaan kouluvalinnan suhteen. Lähikouluvalintastrategiaa suosivien jälkeläiset siirtyivät koulunsa yleisluokalle. Perheet toimivat valintakentällä kaupungin rajaavan toimintapolitiikan ohjaamina, jolloin kouluvalinta näytti passiiviselta. Osoitteenmukaiseen kouluun siirtymistä perusteltiin praktisilla syillä; koulumatkan pituudella, kulkuyhteyksillä ja lapsen kaverisuhteilla. Hyvinvointivaltion edellytykseksi nähtiin kaikille taattu samanvertainen koulutus ja edelleen luotettiin perinteistä peruskoulua määrittävään mahdollisuuksien tasa-arvoon. Koulutuksen yhdeksi tärkeäksi tehtäväksi nähtiin lapsen kasvattaminen hyvinvoivaksi ja onnelliseksi. Vanhempien toiminta oli perinteisen kouluvalintastrategian mukaista. Ambivalenttista kouluvalintastrategiaa käyttävistä perheistä toiminta kouluvalintakentällä oli kahtalaista. Äidit joko harkitsivat kouluvalintoja tai vertailivat kouluja ja niihin pääsymahdollisuuksia realistisesti tasapainoillen ohjaavan ja mahdollistavan toimintapolitiikan välimaastossa. Tärkeintä oli olla tietoinen kaupungin kouluvalintapolitiikasta sekä siitä, että valinnoilla voi olla merkitystä jälkikasvun koulupolulle. Eri vaihtoehtojen punnitsemisen jälkeen päädyttiin useimmin lähikoulun painotettuun opetukseen. Lapsen peruskoulutusta haluttiin rikastaa painotetulla opetuksella ja hänen toivottiin pääsevän motivoituneeseen ja oppimismyönteiseen koululuokkaan. Valintoja tehtiin paikallisen toimintapolitiikan puitteissa lapsen parasta toivoen. Koulutuksen tehtäväksi nähtiin lapsen intellektuaalinen kasvu kiedottuna koulutuksen tuottamaan hyvinvointiin ja onnellisuuteen. Perheiden valintastrategiaksi muodostui ambivalenttinen strategia motivoituneen oppimisympäristön löytämiseksi. Päämäärätietoista kouluvalintastrategiaa käyttävät vanhemmat hyödynsivät aktiivisesti erilaisia reittejä tiettyihin yläkouluihin pääsemiseksi. Ennakoivien perheiden lapset olivat opiskelleet sellaisessa alakoulussa, joka ei kuulunut yläkoulun oppilasalueelle, mutta takasi lapselle reitin suosittuun yläkouluun. Määrätietoisten perheissä havahduttiin valintoihin puolestaan yläkouluun siirryttäessä, jolloin koulupaikkaa haettiin sopivimman painotetun opetuksen ja koulun maineen mukaan pois lähiyläkoulusta. Lähikoulu -periaate koettiin epäoikeudenmukaiseksi, sillä lapsella tulee olla oikeus toteuttaa omia kykyjään ja lahjakkuuttaan valikoidussa oppilasryhmässä ja perheillä mahdollisuus valita lapsen koulu. Paikallinen toimintapolitiikka ei näyttänyt rajaavan vanhempien kouluvalintoja. Koulutuksen tarkoitukseksi nähtiin intellektuaalinen kasvu ja akateemissivistävä tehtävä. Päämäärätietoisen kouluvalintavalintastrategian tavoitteena oli perheelle sopivan habituksen takaaminen. Paikallinen toimintapolitiikka mahdollisti vanhempien erilaisten kouluvalintastrategioiden rakentumisen ohjaten ensisijaisesti lähiyläkouluun, mutta samalla mahdollistaen koulun valinnan toissijaisen haun kriteerein. Kouluvalintastrategioihin ja toimintatapaan kouluvalintakentällä kytkeytyi vanhempien koulutukseen liittämät arvot sekä kulttuuriset ja sosiaaliset resurssit ja se, miten niitä käytettiin.