Microcracks and Vortices in Superconducting Thin Films

In this work, superconducting YBa₂ Cu₃O_6+x (YBCO) thin films have been studied with the experimental focus on the anisotropy of BaZrO₃ (BZO) doped YBCOthin films and the theoretical focus on modelling flux pinning by numerically solving Ginzburg- Landau equations. Also, the structural properties of undoped YBCO thin films grown on NdGaO₃ (NGO) and MgO substrates were investigated. The thin film samples were made by pulsed laser ablation on single crystal substrates. The structural properties of the thin films were characterized by X-ray diffraction and atomic force microscope measurements. The superconducting properties were investigated with a magnetometer and also with transport measurements in pulsed magnetic field up to 30 T. Flux pinning was modelled by restricting the value of the order parameter inside the columnar pinning sites and then solving the Ginzburg-Landau equations numerically with the restrictions in place. The computations were done with a parallel code on a supercomputer. The YBCO thin films were seen to develop microcracks when grown on NGO or MgO substrates. The microcrack formation was connected to the structure of the YBCO thin films in both cases. Additionally, the microcracks can be avoided by careful optimization of the deposition parameters and the film thickness. The BZO doping of the YBCO thin films was seen to decrease the effective electron mass anisotropy, which was seen by fitting the Blatter scaling to the angle dependence of the upper critical field. The Ginzburg-Landau simulations were able to reproduce the measured magnetic field dependence of the critical current density for BZO doped and undoped YBCO. The simulations showed that in addition to the large density also the large size of the BZO nanorods is a key factor behind the change in the power law behaviour between BZO doped and undoped YBCO. Additionally, the Ginzburg-Landau equations were solved for type I thin films where giant vortices were seen to appear depending on the film thickness. The simulations predicted that singly quantized vortices are stable in type I films up to quite large thicknesses and that the size of the vortices increases with decreasing film thickness, in a way that is similar to the behaviour of the interaction length of Pearl vortices.

Luottamuksen lähteet. Vertaileva tutkimus yleistynyttä luottamusta synnyttävistä mekanismeista

Tutkimuksen aiheena on yleistynyt luottamus. Väitöskirjassa tutkitaan mistä tuntemattomien kansalaisten toisiinsa kohdistama luottamus kumpuaa ja haetaan vastauksia tähän kysymykseen sekä maakohtaisen että vertailevan tutkimuksen avulla. Tutkimus koostuu yhteenvedon lisäksi viidestä tutkimusartikkelista, joissa luottamuksen syntyä tarkastellaan sekä yksilöiden mikrotason vuorovaikutuksen että maiden välisten eroavaisuuksien näkökulmasta. Yleistyneen luottamuksen synnystä on esitetty useita eri teorioita. Tässä tutkimuksessa tarkastellaan näistä kahta keskeisintä. Osa tutkijoista korostaa kansalaisyhteiskunnan ja ruohonjuuritason verkostojen roolia yleistyneen luottamuksen synnyn taustalla. Tämän hypoteesin mukaan kansalaiset, jotka viettävät aikaansa yhdistyksissä tai muissa sosiaalisissa verkostoissa, oppivat muita helpommin luottamaan paitsi täysin tuntemattomiin ihmisiin myös yhteiskunnallisiin instituutioihin (kansalaisyhteiskuntakeskeinen hypoteesi). Toiset taas painottavat yhteiskunnan julkisten instituutioiden merkitystä. Tämä hypoteesi korostaa instituutioiden reiluutta ja oikeudenmukaisuutta (instituutiokeskeinen hypoteesi). Ihmiset pystyvät luottamaan toisiinsa ja ratkaisemaan kollektiivisia ongelmiaan yhdessä silloin kun esimerkiksi poliittiset ja lainsäädännölliset instituutiot pystyvät luomaan tähän tarvittavan toimintaympäristön. Aineistoina käytetään kansallisia (Hyvinvointi- ja palvelut) sekä kansainvälisiä vertailevia kyselytutkimuksia (European Social Survey ja ISSP). Yksilö- ja makrotason analyyseja yhdistämällä selvitetään yleistynyttä luottamusta selittäviä tekijöitä sekä mekanismeja joiden kautta yleistynyt luottamus muodostuu. Väitöskirjan tulokset tukevat suurimmaksi osaksi instituutiokeskeiseen suuntaukseen sisältyviä hypoteeseja yleistyneen luottamuksen kasautumisesta. Kuitenkin myös esimerkiksi yhdistystoiminnalla havaittiin olevan joitakin yhdistysjäsenien ulkopuolelle ulottuvia myönteisiä vaikutuksia kansalaisten luottamukseen, mikä taas tukee kansalaisyhteiskuntakeskeistä hypoteesia. Tutkimuksen keskeinen tulos on, että kaiken kaikkiaan luottamus näyttäisi kukoistavan maissa, joissa kansalaiset kokevat julkiset instituutiot oikeudenmukaisina sekä reiluina, kansalaisyhteiskunnan roolin luottamuksen synnyttämisessä ollessa tälle alisteinen. Syyksi tähän on oletettu, että näissä maissa (erityisesti pohjoismaiset hyvinvointivaltiot) harjoitettu universaali hyvinvointipolitiikka ja palvelut ovat keskeisiä korkeaa yleistynyttä luottamusta selittäviä tekijöitä. Toisaalta maavertailuissa tätä yhteyttä on selitetty myös sillä, että näissä yhteiskunnassa ei ole paikannettavissa selkeää kulttuurisesti erottuvaa alaluokkaa. Tämän tutkimuksen tulokset tukevat enemmän universaalin hyvinvointivaltion oikeudenmukaisuuteen liittyviä ominaisuuksia alaluokkaistumishypoteesin sijaan. Toisaalta mikrotasolla tarkasteltuna yleistyneen luottamuksen ja hyvinvointipalvelujen välinen yhteys liittyy enemmän palveluiden riittävyyteen kuin niiden universaalisuuden asteeseen. Niin ikään maavertailuissa esimerkiksi verotuksen oikeudenmukaisena kokeminen näyttäisi olevan palvelujen saatavuutta tai niihin liittyviä oikeudenmukaisuuden kokemuksia tärkeämpi seikka yleistyneen luottamuksen kannalta.

Eurokriisi ja euroalueen rakenteelliset ongelmat

Maailmanlaajuinen finanssikriisi on vaikuttanut merkittävällä tavalla euroalueen toimintaan ja tuonut esiin ongelmia sen rakenteessa. Tutkielman tavoitteena oli tunnistaa eurokriisiin johtaneita tekijöitä ja euroalueen keskeisiä rakenteellisia ongelmia. Teoriakehys muodostui optimaalisen valuutta-alueen teoriasta, jota täydennettiin velkaantumiseen, pankkikriiseihin ja vaihtotaseiden epätasapainotiloihin liittyvällä teorialla. Tutkimuksessa hyödynnettiin laaja-alaisesti olemassa olevaa teoreettista ja empiiristä kirjallisuutta sekä eri tietokannoista saatavaa makrodataa. Tulokset kertovat rahoitusmarkkinoiden keskeisestä roolista epätasapainotilojen kehittymisessä sekä rahaunionin puutteellisista mukautumismekanismeista. Institutionaalisen rakenteen osalta euroalueen keskeisiä ongelmia ovat olleet tehokkaan pankkivalvonnan puute sekä viime hetken lainoittajan puuttuminen valtionvelkakirjamarkkinoilla.

Mirage 2: A responsive user interface for DSpace

Presentation at Open Repositories 2014, Helsinki, Finland, June 9-13, 2014

Käteiskontrollista virtsavalvontaan

Kirjallisuusarvostelu

Yritysten väliset erot liikearvon arvonalentumistestauksen raportoinnissa

Tämän pro gradu -tutkielman tavoitteena oli tutkia, minkälaisia eroja suomalaisten listayhtiöiden välillä on liikearvon arvonalentumistestausta koskevassa raportoinnissa. Huomiota kiinnitettiin erityisesti arvonalentumistestissä käytettyjen menetelmien ja oletusten eroihin, sekä siihen, heijastuvatko taloudelliset tekijät arvonalentumistestauksen tilinpäätösraportointiin. Teoriaperusta muodostettiin aihepiirin kansainvälisten laskentasäännösten ja aiempien tieteellisten julkaisujen avulla. Tutkimusmenetelmä oli laadullinen ja empiirisenä aineistona käytettiin 20:n teknologia- ja kulutuspalveluiden toimialoilla toimivan yrityksen tilinpäätöksiä. Tutkimustulosten mukaan yritykset eivät raportoi liikearvoon liittyviä asioita yhdenmukaisesti, vaan vaihtelua liittyy niin käytettyihin taustaoletuksiin kuin ylipäätään raportoinnin avoimuuteen. Arvonalentumistestauksen raportointiin liittyvän herkkyysanalyysin katsottiin kuitenkin heijastavan yritysten aiempien tilikausien tai raportointikauden taloudellista menestystä.

Päijäthämäläisten nuorten yrittäjien menestystekijät

Tämän Pro Gradu–tutkimuksen keskeisin tavoite on ollut selvittää mitkä ovat päijäthämäläisten nuorten yrittäjien menestystekijät ja löytyykö me-nestyksen takana olevista tekijöistä ja ilmiöistä yhdistäviä tekijöitä. Tut-kimus on laadullinen ja aineistonkeräystapana käytettiin teemahaastattelua. Tutkimusta varten haastateltiin päijäthämäläisiä nuoria yrittäjiä, joilla on jo näyttöä menestymisestä. Tutkimuksessa pyrittiin selvittämään myös miten nuori yrittäjä tunnistaa omat menestystekijänsä ja mitkä ovat nuorten yrittäjien mielestä tärkeimmät menestymisen kriteerit. Tutkimustulokset osoittavat, että päijäthämäläisten nuorten yrittäjien tärkeimmät menestystekijät ovat tapa, jolla yrittäjäksi on ryhdytty, sidosryhmät ja verkostot sekä kokonaisuutena yrittäjä itse. Yrittäjän itsensä muodostamasta kokonaisuudesta nousi tutkimuksessa vahvimmin esiin kolme eri osatekijää: yrittäjän persoona, yrittäjämäisyys sekä sisäinen menestymi-nen. Tutkimustulokset osoittavat, että yhdistäviä tekijöitä menestykselle löytyy ja että nuoret yrittäjät tunnistavat omia menestystekijöitään.

Hallintoelinten oikeudenmukainen palkitseminen - toimialavertailu osuustoiminnallisissa organisaatioissa

Työn tarkoituksena oli lähteä tutkimaan palkitsemisen, vaativuuden ja tehtävien eroavaisuuksia kolmen osuustoiminnallisen organisaation hallintoelinten välillä. Tavoitteena oli selvittää, miten palkitsemisen horisontaalista oikeudenmukaisuutta voitaisiin kehittää osuustoiminnallisten organisaatioiden hallintoelimissä. Tutkimus toteutettiin kvantitatiivisena kyselylomaketutkimuksena, ja analysointimenetelmänä käytettiin regressioanalyysiä. Tutkimuksen teoreettinen viitekehys koostui palkitsemisesta ja sen oikeudenmukaisuudesta keskittyen horisontaaliseen ulottuvuuteen, työn vaativuudesta sekä aiempien tutkimusten perusteella palkitsemiseen vaikuttavista tekijöistä muun muassa rakenteen, toimialan ja strategian näkökulmista. Tutkimuksessa havaittiin, että tilaajaorganisaatiossa X palkkiot olivat vertailuorganisaatiota Y ja Z korkeammat. Erot vaativuuden ja tehtävien osalta eivät olleet yhtä suuria kuin palkkioissa, mutta organisaatiossa X nämäkin olivat pääasiassa korkeammalla tasolla. Regressioanalyysissä kävi ilmi, että työn vaativuus selittää suurimman osan palkitsemisen kertymästä ja muut tilastollisesti merkittävät selittävät muuttujat olivat huomattavasti vähäisempiä. Organisaation X korkeamman palkkiotason voitiin nähdä johtuvan erilaisesta palkkiorakenteesta sekä siitä, että se otti palkitsemisessa organisaation koon huomioon; palkkiot vaihtelivat huomattavasti enemmän alueorganisaatioiden kesken kuin organisaatiossa Y ja Z. Johtopäätöksenä voidaan sanoa, että työn vaativuusarviointi palkkioiden horisontaalista oikeudenmukaisuutta arvioitaessa on merkittävimmässä asemassa. Muiden tarkasteltujen muuttujien osalta tulokset eivät olleet aivan odotetun kaltaisia tai täysin yhdenmukaisia aiempien tutkimusten kanssa, vaikka samansuuntaisiakin havaintoja saatiin. Työn tärkein anti oli kuitenkin työn vaativuusarvioinnin tärkeyden havaitseminen hallintoelintyön palkitsemisen yhteydessä horisontaalisella tasolla.

Molecular Mechanisms and Interactions in Regulation of Photosynthetic Reactions

In photosynthesis, light energy is converted to chemical energy, which is consumed for carbon assimilation in the Calvin-Benson-Bassham (CBB) cycle. Intensive research has significantly advanced the understanding of how photosynthesis can survive in the ever-changing light conditions. However, precise details concerning the dynamic regulation of photosynthetic processes have remained elusive. The aim of my thesis was to specify some molecular mechanisms and interactions behind the regulation of photosynthetic reactions under environmental fluctuations. A genetic approach was employed, whereby Arabidopsis thaliana mutants deficient in specific photosynthetic protein components were subjected to adverse light conditions and assessed for functional deficiencies in the photosynthetic machinery. I examined three interconnected mechanisms: (i) auxiliary functions of PsbO1 and PsbO2 isoforms in the oxygen evolving complex of photosystem II (PSII), (ii) the regulatory function of PGR5 in photosynthetic electron transfer and (iii) the involvement of the Calcium Sensing Receptor CaS in photosynthetic performance. Analysis of photosynthetic properties in psbo1 and psbo2 mutants demonstrated that PSII is sensitive to light induced damage when PsbO2, rather than PsbO1, is present in the oxygen evolving complex. PsbO1 stabilizes PSII more efficiently compared to PsbO2 under light stress. However, PsbO2 shows a higher GTPase activity compared to PsbO1, and plants may partially compensate the lack of PsbO1 by increasing the rate of the PSII repair cycle. PGR5 proved vital in the protection of photosystem I (PSI) under fluctuating light conditions. Biophysical characterization of photosynthetic electron transfer reactions revealed that PGR5 regulates linear electron transfer by controlling proton motive force, which is crucial for the induction of the photoprotective non-photochemical quenching and the control of electron flow from PSII to PSI. I conclude that PGR5 controls linear electron transfer to protect PSI against light induced oxidative damage. I also found that PGR5 physically interacts with CaS, which is not needed for photoprotection of PSII or PSI in higher plants. Rather, transcript profiling and quantitative proteomic analysis suggested that CaS is functionally connected with the CBB cycle. This conclusion was supported by lowered amounts of specific calciumregulated CBB enzymes in cas mutant chloroplasts and by slow electron flow to PSI electron acceptors when leaves were reilluminated after an extended dark period. I propose that CaS is required for calcium regulation of the CBB cycle during periods of darkness. Moreover, CaS may also have a regulatory role in the activation of chloroplast ATPase. Through their diverse interactions, components of the photosynthetic machinery ensure optimization of light-driven electron transport and efficient basic production, while minimizing the harm caused by light induced photodamage.

Modified nano- and microcellulose based adsorption materials in water treatment

In recent decades, industrial activity growth and increasing water usage worldwide have led to the release of various pollutants, such as toxic heavy metals and nutrients, into the aquatic environment. Modified nanocellulose and microcellulose-based adsorption materials have the potential to remove these contaminants from aqueous solutions. The present research consisted of the preparation of five different nano/microcellulose-based adsorbents, their characterization, the study of adsorption kinetics and isotherms, the determination of adsorption mechanisms, and an evaluation of adsorbents’ regeneration properties. The same well known reactions and modification methods that were used for modifying conventional cellulose also worked for microfibrillated cellulose (MFC). The use of succinic anhydride modified mercerized nanocellulose, and aminosilane and hydroxyapatite modified nanostructured MFC for the removal of heavy metals from aqueous solutions exhibited promising results. Aminosilane, epoxy and hydroxyapatite modified MFC could be used as a promising alternative for H2S removal from aqueous solutions. In addition, new knowledge about the adsorption properties of carbonated hydroxyapatite modified MFC as multifunctional adsorbent for the removal of both cations and anions ions from water was obtained. The maghemite nanoparticles (Fe3O4) modified MFC was found to be a highly promising adsorbent for the removal of As(V) from aqueous solutions due to its magnetic properties, high surface area, and high adsorption capacity . The maximum removal efficiencies of each adsorbent were studied in batch mode. The results of adsorption kinetics indicated very fast removal rates for all the studied pollutants. Modeling of adsorption isotherms and adsorption kinetics using various theoretical models provided information about the adsorbent’s surface properties and the adsorption mechanisms. This knowledge is important for instance, in designing water treatment units/plants. Furthermore, the correspondence between the theory behind the model and properties of the adsorbent as well as adsorption mechanisms were also discussed. On the whole, both the experimental results and theoretical considerations supported the potential applicability of the studied nano/microcellulose-based adsorbents in water treatment applications.

Susteinable steelmaking by process integration

Environmental issues, including global warming, have been serious challenges realized worldwide, and they have become particularly important for the iron and steel manufacturers during the last decades. Many sites has been shut down in developed countries due to environmental regulation and pollution prevention while a large number of production plants have been established in developing countries which has changed the economy of this business. Sustainable development is a concept, which today affects economic growth, environmental protection, and social progress in setting up the basis for future ecosystem. A sustainable headway may attempt to preserve natural resources, recycle and reuse materials, prevent pollution, enhance yield and increase profitability. To achieve these objectives numerous alternatives should be examined in the sustainable process design. Conventional engineering work cannot address all of these substitutes effectively and efficiently to find an optimal route of processing. A systematic framework is needed as a tool to guide designers to make decisions based on overall concepts of the system, identifying the key bottlenecks and opportunities, which lead to an optimal design and operation of the systems. Since the 1980s, researchers have made big efforts to develop tools for what today is referred to as Process Integration. Advanced mathematics has been used in simulation models to evaluate various available alternatives considering physical, economic and environmental constraints. Improvements on feed material and operation, competitive energy market, environmental restrictions and the role of Nordic steelworks as energy supplier (electricity and district heat) make a great motivation behind integration among industries toward more sustainable operation, which could increase the overall energy efficiency and decrease environmental impacts. In this study, through different steps a model is developed for primary steelmaking, with the Finnish steel sector as a reference, to evaluate future operation concepts of a steelmaking site regarding sustainability. The research started by potential study on increasing energy efficiency and carbon dioxide reduction due to integration of steelworks with chemical plants for possible utilization of available off-gases in the system as chemical products. These off-gases from blast furnace, basic oxygen furnace and coke oven furnace are mainly contained of carbon monoxide, carbon dioxide, hydrogen, nitrogen and partially methane (in coke oven gas) and have proportionally low heating value but are currently used as fuel within these industries. Nonlinear optimization technique is used to assess integration with methanol plant under novel blast furnace technologies and (partially) substitution of coal with other reducing agents and fuels such as heavy oil, natural gas and biomass in the system. Technical aspect of integration and its effect on blast furnace operation regardless of capital expenditure of new operational units are studied to evaluate feasibility of the idea behind the research. Later on the concept of polygeneration system added and a superstructure generated with alternative routes for off-gases pretreatment and further utilization on a polygeneration system producing electricity, district heat and methanol. (Vacuum) pressure swing adsorption, membrane technology and chemical absorption for gas separation; partial oxidation, carbon dioxide and steam methane reforming for methane gasification; gas and liquid phase methanol synthesis are the main alternative process units considered in the superstructure. Due to high degree of integration in process synthesis, and optimization techniques, equation oriented modeling is chosen as an alternative and effective strategy to previous sequential modelling for process analysis to investigate suggested superstructure. A mixed integer nonlinear programming is developed to study behavior of the integrated system under different economic and environmental scenarios. Net present value and specific carbon dioxide emission is taken to compare economic and environmental aspects of integrated system respectively for different fuel systems, alternative blast furnace reductants, implementation of new blast furnace technologies, and carbon dioxide emission penalties. Sensitivity analysis, carbon distribution and the effect of external seasonal energy demand is investigated with different optimization techniques. This tool can provide useful information concerning techno-environmental and economic aspects for decision-making and estimate optimal operational condition of current and future primary steelmaking under alternative scenarios. The results of the work have demonstrated that it is possible in the future to develop steelmaking towards more sustainable operation.

Management of Soft Information in Sales and Operations Planning

With a Sales and Operations Planning (S&OP) process, a company aims to manage the demand and supply by planning and forecasting. The studied company uses an integrated S&OP process to improve the company's operations. The aim of this thesis is to develop this business process by finding the best possible way to manage the soft information in S&OP, whilst also understanding the importance and types (assumptions, risks and opportunities) of soft information in S&OP. The soft information in S&OP helps to refine future S&OP planning, taking into account the uncertainties that affect the balance of the long-term demand and supply (typically 12-18 months). The literature review was used to create a framework for soft information management process in S&OP. There were not found a concrete way how to manage soft information in the existing literature. In consequence of the poor literature available the Knowledge Management literature was used as the base for the framework creation, which was seen in the very same type of information management like the soft information management is. The framework created a four-stage process to manage soft information in S&OP that included also the required support systems. First phase is collecting and acquiring soft information in S&OP, which include also categorization. The categorization was the cornerstone to identify different requirements that needs to be taken into consideration when managing soft information in S&OP process. The next phase focus on storing data, which purpose is to ensure the soft information is managed in a common system (support system) in a way that the following phase makes it available to users in S&OP who need by help of sharing and applications process. The last phase target is to use the soft information to understand assumptions and thoughts of users behind the numbers in S&OP plans. With this soft management process the support system will have a key role. The support system, like S&OP tool, ensures that soft information is stored in the right places, kept up-to-date and relevancy. The soft information management process in S&OP strives to improve the relevant soft information documenting behind the S&OP plans into the S&OP support system. The process offers an opportunity to individuals to review, comment and evaluate soft information in S&OP made by their own or others. In the case company it was noticed that without a properly documented and distributed soft information in S&OP it was seen to cause mistrust towards the planning.

Linking supplier delivery risk to outbound delivery service performance improvement

Customer satisfaction should be the main focus for all of the parts of the business. Usually supply chain behind the business is in a key role when this focus is pursued especially in repair service business. When focusing on the materials that are needed to make repairs to equipment under service contracts, the time aspect of quality is critical. Do late deliveries from supplier have an effect on the service performance of repairs when distribution center of a centralized purchasing unit is acting as a buffer between suppliers and repair service business? And if so, how should the improvement efforts be prioritized? These are the two main questions that this thesis focuses on. Correlation and linear regression was tested between service levels of supplier and distribution center. Percentage of on-time deliveries were compared to outbound delivery service level. It was found that there is statistically significant correlation between inbound and outbound operations success. The other main question of the thesis, improvement prioritization, was answered by creating material availability based supplier classification and additional to that, by developing the decision process for the analysis of most critical suppliers. This was built on a basis of previous supplier and material classification methods.

Early Life Intestinal Microbiota in Health and in Atopic Eczema

Decrease in microbial contacts in affluent societies is considered to lie behind the rise in allergic and other chronic inflammatory diseases during the last decades. Indeed, deviations in the intestinal microbiota composition and diversity have been associated with several diseases, such as atopic eczema. However, there is no consensus yet on what would constitute a beneficial or harmful microbiota. The aim of this thesis was to study the microbiota development in healthy infants and to characterize intestinal microbiota signatures associated with disease status and severity in infants with atopic eczema. The methodological aim was to compare and optimize methods for DNA extraction from fecal samples to be used in high-throughput microbiota analyses. It was confirmed that the most critical step in successful microbial DNA extraction from fecal samples is the mechanical cell lysis procedure. Based on this finding, an efficient semi-automated extraction process was developed that can be scaled for use in high-throughput platforms such as phylogenetic microarray used in this series of studies. By analyzing a longitudinal motherchild cohort for 3 years it was observed that the microbiota development is a gradual process, where some bacterial groups reach the degree of adult-type pattern earlier than others. During the breast-feeding period, the microbiota appeared to be relatively simple, while major diversification was found to start during the weaning process. By the age of 3 years, the child’s microbiota composition started to resemble that of an adult, but the bacterial diversity has still not reached the full diversity, indicating that the microbiota maturation extends beyond this age. In addition, at three years of age, the child’s microbiota was more similar to mother’s microbiota than to microbiota of nonrelated women.In infants with atopic eczema, a high total microbiota diversity and abundance of butyrate-producing bacteria was found to correlate with mild symptoms at 6 months. At 18 months, infants with mild eczema had significantly higher microbiota diversity and aberrant microbiota composition when compared to healthy controls at the same age. In conclusion, the comprehensive phylogenetic microarray analysis of early life microbiota shows the synergetic effect of vertical transmission and shared environment on the intestinal microbiota development. By the age of three years, the compositional development of intestinal microbiota is close to adult level, but the microbiota diversification continues beyond this age. In addition, specific microbiota signatures are associated with the existence and severity of atopic eczema and intestinal microbiota seems to have a role in alleviating the symptoms of this disease.