Adult education policy in the European Union during the Lisbon decade : the shift to vocational adult learning and work skills matching

This doctoral dissertation investigates the adult education policy of the European Union (EU) in the framework of the Lisbon agenda 2000–2010, with a particular focus on the changes of policy orientation that occurred during this reference decade. The year 2006 can be considered, in fact, a turning point for the EU policy-making in the adult learning sector: a radical shift from a wide--ranging and comprehensive conception of educating adults towards a vocationally oriented understanding of this field and policy area has been observed, in particular in the second half of the so--called ‘Lisbon decade’. In this light, one of the principal objectives of the mainstream policy set by the Lisbon Strategy, that of fostering all forms of participation of adults in lifelong learning paths, appears to have muted its political background and vision in a very short period of time, reflecting an underlying polarisation and progressive transformation of European policy orientations. Hence, by means of content analysis and process tracing, it is shown that the new target of the EU adult education policy, in this framework, has shifted from citizens to workers, and the competence development model, borrowed from the corporate sector, has been established as the reference for the new policy road maps. This study draws on the theory of governance architectures and applies a post-ontological perspective to discuss whether the above trends are intrinsically due to the nature of the Lisbon Strategy, which encompasses education policies, and to what extent supranational actors and phenomena such as globalisation influence the European governance and decision--making. Moreover, it is shown that the way in which the EU is shaping the upgrading of skills and competences of adult learners is modeled around the needs of the ‘knowledge economy’, thus according a great deal of importance to the ‘new skills for new jobs’ and perhaps not enough to life skills in its broader sense which include, for example, social and civic competences: these are actually often promoted but rarely implemented in depth in the EU policy documents. In this framework, it is conveyed how different EU policy areas are intertwined and interrelated with global phenomena, and it is emphasised how far the building of the EU education systems should play a crucial role in the formation of critical thinking, civic competences and skills for a sustainable democratic citizenship, from which a truly cohesive and inclusive society fundamentally depend, and a model of environmental and cosmopolitan adult education is proposed in order to address the challenges of the new millennium. In conclusion, an appraisal of the EU’s public policy, along with some personal thoughts on how progress might be pursued and actualised, is outlined.

The adjustment from Russia to Finland for corporate repatriates: How the repatriation experience influences readjustment in the workplace

To manage foreign operations, companies must often send their employees on international assignments. Repatriating these expatriates can be difficult because they have been forgotten during their posting, and their new experiences are not utilised. In addition to the possible difficulties in organisational repatriation, the returnee can suffer from readjustment problems after a lengthy stay abroad has changed their habits and even identity. This thesis examines the repatriation experience of Finnish assignees returning from Russia. The purpose of the study is to understand how the repatriation experience influences their readjustment to work in Finland. This experience is influenced by many factors including personal and situational changes, the repatriation process, job and organisational factors, and individual’s motives. The theoretical background of the study is founded on two models of repatriation adjustment. A refined, holistic theoretical framework for the study is created. It describes the formation of the repatriation experience and its importance for readjustment to work and retention. The qualitative research approach is suitable for the thesis which examines the returnees’ personal experiences and feelings: a qualitative case study aims to explain the phenomenon in-depth and comprehensively. The data was collected in summer 2013 through semi-standardised interviews with eight Finnish repatriates. They had returned from Russia within the last two years. The data was analysed by structuring the interview transcripts using template analysis. The results supported earlier literature and suggest that the re-entry remains a challenging phase for both the individual and the company. For some, adjusting to a new job was difficult for various reasons. The repatriates underwent personal change and development and felt it was for the better. Many repatriates criticised the company’s repatriation process upon return. Finding a suitable return job was not clear. Instead, the returnees had to be active in finding a new position. Many assignees had only modest career-related motives regarding the assignment and they had realistic expectations about the return. Therefore they were not extremely surprised or dissatisfied when they were not actively offered positions or support by the company. The significance of motives stood out even more than the theory predicted. As predicted, they are linked to the expectations of employees. Moreover, if the employees are motivated to remain in the company, they can tolerate partly a negative repatriation experience. Despite the complexity of the return and readjustment, the assignment as a whole was seen as a rewarding experience by all participants.

Analysis of corporate social responsibility (CSR) performance and financial performance of selected mining companies

The global concern about sustainability has been growing and the mining industry is questioned about its environmental and social performance. Corporate social responsibility (CSR) is an important issue for the extractive industries. The main objective of this study was to investigate the relationship between CSR performance and financial performance of selected mining companies. The study was conducted by identifying and comparing a selection of available CSR performance indicators with financial performance indicators. Based on the result of the study, the relationship between CSR performance and financial performance is unclear for the selected group of companies. The result is mixed and no industry specific realistic way to measure CSR performance uniformly is available. The result as a whole is contradictory and varies at company level as well as based on the selected indicators. The result of this study confirms that the relationship between CSR performance and financial performance is complicated and difficult to determine. As an outcome, evaluation of benefits of CSR in the mining sector could better be analyzed based on different attributes.

Importance of considering food waste in the development of sustainable food packaging systems

Meeting the needs of both present and future generations forms the foundation of sustainable development. Concern about food demand is increasing alongside the continuously growing population. In the pursuit of food security preventing food waste is one solution avoiding the negative environmental impacts that result from producing food unnecessarily. Packages offer one answer to preventing food waste, as they 1) preserve and protect food, 2) introduce the user to the correct way to handle and use the food and package and 3) allow the user to consume the food in its entirety. This thesis aims to enhance the sustainability of food packages by giving special emphasis to preventing food waste. The focus of this thesis is to assist the packaging designer in being able to take into account the requirements for the sustainability of food packages and to be able to integrate these requirements into the product development process. In addition, life cycle methods that can be used as a tool in the packaging design process or in assessing the sustainability of finished food-packaging combinations are evaluated. The methods of life cycle costing (LCC) and life cycle working environment (LCWE) are briefly discussed. The method of life cycle assessment (LCA) is examined more thoroughly through the lens of the literature review of food-package LCA case studies published in the 21st century in three relevant journals. Based on this review and on experiences learned from conducting LCAs, recommendations are given as to how the LCA practitioner should conduct a food packaging study to make most of the results. Two case studies are presented in this thesis. The first case study relates the results of a life cycle assessment conducted for three food items (cold cut (ham), sliced dark bread (rye) and Soygurt drink) and the alternative packaging options of each. Results of this study show that the packaging constitutes only 1–12 % of the total environmental impacts of the food-packaging combination. The greatest effect is derived from the food itself and the wasted food. Even just a small percentage of wasted food causes more environmental impacts than does the packaging. The second case study presents the results of LCC and LCWE analysis done for fruit and vegetable transport packages. In this thesis, the specific results of the study itself are not the focus, but rather the study methods and scope are analysed based on how these complement the sustainability assessment of food packages. This thesis presents reasons why prevention of food waste should be more thoroughly taken into account in food packaging design. In addition, the task of the packaging designer is facilitated by the requirements of sustainable food packaging, by the methods and step-by-step guidance on how to integrate sustainability issues into the design process, and by the recommendations on how to assess the sustainability of food packages. The intention of this thesis is to express the issues that are important in the field of the food packaging industry. Having recognised and implemented these issues, businesses can better manage the risks that could follow from neglecting these sustainability aspects.

Kestävä liiketoiminta kansainvälisessä sopimusvalmistuksessa: Case Nike

Tässä kandidaatintyössä esitellään kestävään kehitykseen, yritysten sosiaaliseen vastuuseen sekä sopimusvalmistukseen liittyvää teoriaa ja sovelletaan sitä tämän jälkeen case -yritys Niken toiminnan tutkimiseen ja arviointiin. Työn tavoitteena on muodostaa selkeä kuva Niken toiminnasta yritysvastuullisuuden sekä kestävän kehityksen hyväksi ja esitellä aihealueeseen liittyvä teoria sekä käsitteet. Työn avulla pyritään tekemään myös jonkinasteisia yleistyksiä suuryritysten vaikutuksista kohdealueisiin sopimusvalmistuksen yhteydessä. Työ on toteutettu osittain kirjallisuuskatsauksena ja osittain tapaustutkimuksena hyödyntäen pääasiallisesti elektronista tiedonhakua. Tutkimuksen tuloksena voidaan todeta, että Niken tämänhetkinen tilanne yritysvastuullisuuden saralla on erinomainen ja se on kestävän kehityksen alalla edelläkävijä. Nike on säilyttänyt toiminnassaan ja koko tuotantoketjussaan kestävät periaatteet sopimusvalmistuksen tuomista laajoista verkostoista ja sidosryhmäsuhteista huolimatta. Yritysten sosiaalinen vastuu sekä sopimusvalmistus ovat tuoneet Niken brändille laajamittaista arvostusta ja tätä kautta välillisesti taloudellista menestystä. Uhratuista resursseista huolimatta Nike pärjää tällä hetkellä taloudellisesti paremmin, kuin ennen vastuullisuuden sekä kestävien toimintamallien laajempaa implementaatiota. Myös tulevaisuus näyttää Niken kohdalla valoisalta.

Towards sustainable Iron- and steelmaking with economic optimization

The iron and steelmaking industry is among the major contributors to the anthropogenic emissions of carbon dioxide in the world. The rising levels of CO2 in the atmosphere and the global concern about the greenhouse effect and climate change have brought about considerable investigations on how to reduce the energy intensity and CO2 emissions of this industrial sector. In this thesis the problem is tackled by mathematical modeling and optimization using three different approaches. The possibility to use biomass in the integrated steel plant, particularly as an auxiliary reductant in the blast furnace, is investigated. By pre-processing the biomass its heating value and carbon content can be increased at the same time as the oxygen content is decreased. As the compression strength of the preprocessed biomass is lower than that of coke, it is not suitable for replacing a major part of the coke in the blast furnace burden. Therefore the biomass is assumed to be injected at the tuyere level of the blast furnace. Carbon capture and storage is, nowadays, mostly associated with power plants but it can also be used to reduce the CO2 emissions of an integrated steel plant. In the case of a blast furnace, the effect of CCS can be further increased by recycling the carbon dioxide stripped top gas back into the process. However, this affects the economy of the integrated steel plant, as the amount of top gases available, e.g., for power and heat production is decreased. High quality raw materials are a prerequisite for smooth blast furnace operation. High quality coal is especially needed to produce coke with sufficient properties to ensure proper gas permeability and smooth burden descent. Lower quality coals as well as natural gas, which some countries have in great volumes, can be utilized with various direct and smelting reduction processes. The DRI produced with a direct reduction process can be utilized as a feed material for blast furnace, basic oxygen furnace or electric arc furnace. The liquid hot metal from a smelting reduction process can in turn be used in basic oxygen furnace or electric arc furnace. The unit sizes and investment costs of an alternative ironmaking process are also lower than those of a blast furnace. In this study, the economy of an integrated steel plant is investigated by simulation and optimization. The studied system consists of linearly described unit processes from coke plant to steel making units, with a more detailed thermodynamical model of the blast furnace. The results from the blast furnace operation with biomass injection revealed the importance of proper pre-processing of the raw biomass as the composition of the biomass as well as the heating value and the yield are all affected by the pyrolysis temperature. As for recycling of CO2 stripped blast furnace top gas, substantial reductions in the emission rates are achieved if the stripped CO2 can be stored. However, the optimal recycling degree together with other operation conditions is heavily dependent on the cost structure of CO2 emissions and stripping/storage. The economical feasibility related to the use of DRI in the blast furnace depends on the price ratio between the DRI pellets and the BF pellets. The high amount of energy needed in the rotary hearth furnace to reduce the iron ore leads to increased CO2 emissions.

Can tourism be sustainable? : service experiences from tourism destinations in Europe

The tourism industry is growing rapidly, and thus there is an urgent need to developing sustainable tourism. The research objective of the thesis is to explore and discuss the concept of sustainability within the tourism industry from a marketing point of view, focusing on the perspective of tourist producers’. The thesis consists of four studies, each of which contains different perspectives to support this overall objective. The first study deals with how a hotel can achieve economic sustainability by creating a high level of customer service delivery using a refined GAP-model. The second study examines how tourist producers at mass tourism destinations work with sustainable tourism as a strategic marketing tool in their tourism product development. The third study addresses economic sustainability at the macro level by estimating the tourism demand for Sweden and Norway in five different countries. In the fourth study, the concept of sustainable mass tourism is developed and analyzed from a conceptual standpoint. Study 1 and study 3 concentrate on economic sustainability from a micro and national perspective. The main contribution of Study 1 is the refined GAP-model, which can be seen as a theoretical contribution to the service marketing research. Study 3 shows that exchange rate trends strongly affect tourists’ choice of destination. Study 2 examines sustainable mass tourism as a strategic marketing tool at the destination level. The conclusions of Study 2 contribute to the findings of Study 4 and consider the tourist producers approach to sustainable tourism. One of the contributions of Study 4 is that the concept of sustainable tourism should be divided into three separate parts; economic sustainability, social sustainability and environmental sustainability.

ELY Centre for Southwest Finland - Sustainable Growth with Us

The Centre for Economic Development, Transport and the Environment for Southwest Finland (ELY Centre for Southwest Finland) is a diverse and broad-ranging development and service centre created during the Government’s Reform Project for Regional administration. Our goal is to strengthen well-being in the regions of Varsinais-Suomi and Satakunta. Networking with other actors in the region is the starting point for our activities. The best ways to achieve impact and reach targets are good co-operation and effective use of resources.

Enabling Change in Universities: Enhancing Education for Sustainable Development with Tools for Quality Assurance

Enabling Change in Universities: Enhancing Education for Sustainable Development with Tools for Quality Assurance This thesis deals with enabling change in universities, more explicitly enhancing education for sustainable development with tools for quality assurance. Change management is a discipline within management that was developed in the 1980s because business changed from being predictable to unpredictable. The PEST mnemonic is a method to categorize factors enabling change; such as political, economic, socio-cultural and technological factors, which all affect higher education. A classification of a change, in either hard or soft, can help understanding the type of change that an organization is facing. Hard changes are more applied to problems that have clear objectives and indicators, with a known cause of the problem. Soft changes are applied to larger problems that affect the entire organization or beyond it. The basic definition for sustainable development is: the future generations should have similar opportunities as the previous. The UN has set as a global goal an integration of education for sustainable development (ESD) at all levels of education during 2005- 2014. The goal is set also in universities, the graduates of which are future leaders for all labor markets. The objective for ESD in higher education is that graduates obtain the competence to take economic, social and environmental costs and benefits into account when making decisions. Knowledge outcomes should aim for systematic and holistic thinking, which requires cross disciplinary education. So far, the development of ESD has not achieved its goals. The UN has identified a need for more transdisclipnary research in ESD. A joint global requirement for universities is quality assurance, the aim of which is to secure and improve teaching and learning. Quality, environmental and integrated management systems are used by some universities for filling the quality assurance requirements. The goal of this thesis is to open up new ways for enhancing ESD in universities, beyond the forerunners; by exploring how management systems could be used as tools for promoting ESD. The thesis is based on five studies. In the first study, I focus on if and how tools for quality assurance could be benefitted for promoting ESD. It is written from a new perspective, the memetic, for reaching a diversity of faculty. A meme is an idea that diffuses from brain to brain. It can be applied for cultural evolution. It is a theory that is based on the evolutionary theory by Darwin, applied for social sciences. In the second Paper, I present the results from the development of the pilot process model for enhancing ESD with management systems. The development of the model is based on a study that includes earlier studies, a survey in academia and an analysis of the practice in 11 universities in the Nordic countries. In the third study, I explore if the change depends on national culture or if it is global. It is a comparative study on both policy and implementation level, between the Nordic countries and China. The fourth study is a single case study based on change management. In this study, I identify what to consider in order to enable the change: enhancing ESD with tools for quality assurance in universities. In the fifth Paper, I present the results of the process model for enhancing ESD with management systems. The model was compared with identified drivers and barriers for enhancing ESD and for implementing management systems. Finally, the process model was piloted and applied for identifying sustainability aspects in curricula. Action research was chosen as methodology because there are not already implemented approaches using quality management for promoting ESD, why the only way to study this is to make it happen. Another reason for choosing action research is since it is essential to involve students and faculty for enhancing ESD. Action based research consists of the following phases: a) diagnosing, b) planning action, c) taking action and d) evaluating action. This research was made possible by a project called Education for Sustainable Development in Academia in the Nordic countries, ESDAN, in which activities were divided into these four phases. Each phase ended with an open seminar, where the results of the study were presented. The objective for the research project was to develop a process for including knowledge in sustainable development in curricula, which could be used in the quality assurance work. Eleven universities from the Nordic countries cooperated in the project. The aim was, by applying the process, to identify and publish examples of relevant sustainability aspects in different degree programs in universities in the Nordic countries. The project was partly financed by the Nordic Council of Ministers and partly by the participating pilot universities. Based on the results of my studies, I consider that quality, environmental and integrated management systems can be used for promoting ESD in universities. Relevant sustainability aspects have been identified in different fields of studies by applying the final process model. The final process model was compared with drivers and barriers for enhancing ESD and for implementing management systems in universities and with succeeding with management systems in industry. It corresponds with these, meaning that drivers are taken into account and barriers tackled. Both ESD and management systems in universities could be considered successful memes, which can reflect an effective way of communication among individuals. I have identified that management systems could be used as tools for hard changes and to support the soft change of enhancing ESD in universities with management system. Based on the change management study I have summarized recommendations on what to consider in order to enable the studied change. The main practical implications of the results are that the process model could be applied for assessment, benchmarking and communication of ESD, connected to quality assurance, when applied. This is possible because the information can be assembled in one picture, which facilitates comparison. The memetic approach can be applied for structuring. It is viable to make comparative studies between cultures, for getting insight in special characteristics of the own culture. Action based research is suitable for involving faculty. Change management can be applied for planning a change, which both enhancing ESD and developing management systems are identified to be.