Reaaliaikainen personoitu tuotannonseurantajärjestelmä

Kandidaatintyön loppuraportti on tehty asiakasyritykselle, jolla on räätälöity ”itse tehty” tuotannonohjausjärjestelmä. Tämä nykyinen tuotannonohjausjärjestelmä soveltuu hyvin massatuotantona tapahtuville eri tuotteiden työvaiheiden siirtymisille. Se ei kuitenkaan mahdollista helppokäyttöistä tuotantovaiheiden ja työvaiheiden reaaliaikaista seurantaa. Kandidaatintyön tarkoituksena on lisätä seurantaa fyysisille tuotantolaitteille, jotka eivät ole yhteydessä tuotannonohjausjärjestelmän kanssa. Projektin kehityskohteena on tehdä oma, irrallinen, helppokäyttöinen, personoitava, www -pohjainen käyttöliittymä, jonka seurantapisteitä voidaan hallinnoida varsin itsenäisesti, ilman ulkoisia kumppaneita.

Feasibility of industrial implementation of laser cutting into paper making machine

Laser cutting implementation possibilities into paper making machine was studied as the main objective of the work. Laser cutting technology application was considered as a replacement tool for conventional cutting methods used in paper making machines for longitudinal cutting such as edge trimming at different paper making process and tambour roll slitting. Laser cutting of paper was tested in 70’s for the first time. Since then, laser cutting and processing has been applied for paper materials with different level of success in industry. Laser cutting can be employed for longitudinal cutting of paper web in machine direction. The most common conventional cutting methods include water jet cutting and rotating slitting blades applied in paper making machines. Cutting with CO2 laser fulfils basic requirements for cutting quality, applicability to material and cutting speeds in all locations where longitudinal cutting is needed. Literature review provided description of advantages, disadvantages and challenges of laser technology when it was applied for cutting of paper material with particular attention to cutting of moving paper web. Based on studied laser cutting capabilities and problem definition of conventional cutting technologies, preliminary selection of the most promising application area was carried out. Laser cutting (trimming) of paper web edges in wet end was estimated to be the most promising area where it can be implemented. This assumption was made on the basis of rate of web breaks occurrence. It was found that up to 64 % of total number of web breaks occurred in wet end, particularly in location of so called open draws where paper web was transferred unsupported by wire or felt. Distribution of web breaks in machine cross direction revealed that defects of paper web edge was the main reason of tearing initiation and consequent web break. The assumption was made that laser cutting was capable of improvement of laser cut edge tensile strength due to high cutting quality and sealing effect of the edge after laser cutting. Studies of laser ablation of cellulose supported this claim. Linear energy needed for cutting was calculated with regard to paper web properties in intended laser cutting location. Calculated linear cutting energy was verified with series of laser cutting. Practically obtained laser energy needed for cutting deviated from calculated values. This could be explained by difference in heat transfer via radiation in laser cutting and different absorption characteristics of dry and moist paper material. Laser cut samples (both dry and moist (dry matter content about 25-40%)) were tested for strength properties. It was shown that tensile strength and strain break of laser cut samples are similar to corresponding values of non-laser cut samples. Chosen method, however, did not address tensile strength of laser cut edge in particular. Thus, the assumption of improving strength properties with laser cutting was not fully proved. Laser cutting effect on possible pollution of mill broke (recycling of trimmed edge) was carried out. Laser cut samples (both dry and moist) were tested on the content of dirt particles. The tests revealed that accumulation of dust particles on the surface of moist samples can take place. This has to be taken into account to prevent contamination of pulp suspension when trim waste is recycled. Material loss due to evaporation during laser cutting and amount of solid residues after cutting were evaluated. Edge trimming with laser would result in 0.25 kg/h of solid residues and 2.5 kg/h of lost material due to evaporation. Schemes of laser cutting implementation and needed laser equipment were discussed. Generally, laser cutting system would require two laser sources (one laser source for each cutting zone), set of beam transfer and focusing optics and cutting heads. In order to increase reliability of system, it was suggested that each laser source would have double capacity. That would allow to perform cutting employing one laser source working at full capacity for both cutting zones. Laser technology is in required level at the moment and do not require additional development. Moreover, capacity of speed increase is high due to availability high power laser sources what can support the tendency of speed increase of paper making machines. Laser cutting system would require special roll to maintain cutting. The scheme of such roll was proposed as well as roll integration into paper making machine. Laser cutting can be done in location of central roll in press section, before so-called open draw where many web breaks occur, where it has potential to improve runability of a paper making machine. Economic performance of laser cutting was done as comparison of laser cutting system and water jet cutting working in the same conditions. It was revealed that laser cutting would still be about two times more expensive compared to water jet cutting. This is mainly due to high investment cost of laser equipment and poor energy efficiency of CO2 lasers. Another factor is that laser cutting causes material loss due to evaporation whereas water jet cutting almost does not cause material loss. Despite difficulties of laser cutting implementation in paper making machine, its implementation can be beneficial. The crucial role in that is possibility to improve cut edge strength properties and consequently reduce number of web breaks. Capacity of laser cutting to maintain cutting speeds which exceed current speeds of paper making machines what is another argument to consider laser cutting technology in design of new high speed paper making machines.

Households’ willingness to engage in demand response in the Finnish retail electricity market: an empirical study

If electricity users adjusted their consumption patterns according to time-variable electricity prices or other signals about the state of the power system, generation and network assets could be used more efficiently, and matching intermittent renewable power generation with electricity demand would be facilitated. This kind of adjustment of electricity consumption, or demand response, may be based on consumers’ decisions to shift or reduce electricity use in response to time-variable electricity prices or on the remote control of consumers’ electric appliances. However, while demand response is suggested as a solution to many issues in power systems, actual experiences from demand response programs with residential customers are mainly limited to short pilots with a small number of voluntary participants, and information about what kinds of changes consumers are willing and able to make and what motivates these changes is scarce. This doctoral dissertation contributes to the knowledge about what kinds of factors impact on residential consumers’ willingness and ability to take part in demand response. Saving opportunities calculated with actual price data from the Finnish retail electricity market are compared with the occurred supplier switching to generate a first estimate about how large savings could trigger action also in the case of demand response. Residential consumers’ motives to participate in demand response are also studied by a web-based survey with 2103 responses. Further, experiences of households with electricity consumption monitoring systems are discussed to increase knowledge about consumers’ interest in getting more information on their electricity use and adjusting their behavior based on it. Impacts of information on willingness to participate in demand response programs are also approached by a survey for experts of their willingness to engage in demand response activities. Residential customers seem ready to allow remote control of electric appliances that does not require changes in their everyday routines. Based on residents’ own activity, the electricity consuming activities that are considered shiftable are very limited. In both cases, the savings in electricity costs required to allow remote control or to engage in demand response activities are relatively high. Nonmonetary incentives appeal to fewer households.

Yritysten kuljetusvirrat ja varastointi Pohjois-Euroopassa

Tämän työn tavoitteena on luoda kuva yritysten kuljetusvirroista ja varastointiratkaisuista Pohjois-Euroopassa. Päätutkimusmenetelmänä käytettiin verkkopohjaista kyselyä, jolla pyrittiin keräämään tietoa Suomen, Ruotsin ja Viron suurimpien yritysten logistisista ratkaisuista. Kyselytutkimus toteutettiin yhteistyössä Tallinnan teknillisen yliopiston sekä Jönköpingin yliopiston kanssa. Toimivat kuljetusjärjestelmät ovat nykyään elintärkeitä, sillä ne luovat edellytykset talouden kasvulle ja hyvinvoinnin lisääntymiselle. Myös akateemisessa tutkimuksessa on havaittu, että yritysten todellisista toiminnoista ja luvuista tulisi saada lisää tietoa. Tässä työssä kerättiin ja analysoitiin tietoa yritysten kuljetusyksiköistä, kuljetusmuodoista, kuljetuskustannuksista, kuljetusvirroista eri maiden välillä, varastointiratkaisuista sekä kabotaasikuljetusten ja rikkidirektiivin vaikutuksista. Kirjallisuus- ja kyselytutkimuksen perusteella puoliperävaunu ja kumipyöräkuljetukset ovat Pohjois-Euroopan suosituimmat kuljetuskeinot. Kyselytulosten mukaan varsinkaan suomalaiset yritykset eivät juuri käytä rautatiekuljetuksia, eikä rautatieyhteyttä pidetty tärkeänä varastojen sijainnista päätettäessä. Kuljetusvirrat Kiinan ja Euroopan välillä suuntautuvat Kiinasta Eurooppaan päin. Kiinasta tuleva kuljetusvirta tulee todennäköisesti pysymään vahvana myös tulevaisuudessa. Venäjän ja Euroopan väliset kuljetusvirrat suuntautuvat kyselytulosten perusteella Euroopasta Venäjälle päin. Pohjois-Euroopassa yrityksillä on käytössä pieniä ja keskikokoisia varastoja sekä suurempia jakelukeskuksia. Tulevaisuudessa varastot vaikuttaisivat keskittyvän hieman suuremmiksi yksiköiksi. Kyselytutkimuksen mukaan kabotaasikuljetukset ovat laskeneet ainakin joidenkin yritysten maantiekuljetusten kustannuksia. Rikkidirektiivin puolestaan odotetaan nostavan merikuljetusten hintoja sekä yritysten kuljetuskustannuksia huomattavasti.

Tulosohjauksen kehittämiskohteet Rikosseuraamuslaitoksella

Diplomityön tavoitteena on Rikosseuraamuslaitoksen tulosohjauksen kuvaaminen, mää-rittely, arviointi ja kehitysehdotusten tekeminen. Lisäksi määritellään normi- ja informaa-tio-ohjaus sekä tarkastellaan kuinka ne näkyvät tulosohjauksessa. Informaatio-ohjauksesta tuodaan esille keskeisimpiä kehityskohteita. Toiminnan tehostamistarpeet johtuvat yleisestä taloustilanteesta ja sitä seuraavasta määrärahojen pienenemisestä. Aluksi pidettiin puolistrukturoidut haastattelut, joiden perusteella kuvattiin laitoksen pro-sessikartta. Tämän jälkeen tulos- ja normiohjauksesta tehtiin eritasoisia prosessikuvauk-sia. Kuvauksilla rajattiin ja selvennettiin tarkasteltavia prosesseja. Kirjallisuuden, tutki-musten ja selvitysten avulla kartoitettiin tulosohjauksen yleisiä kehityskohteita. Niitä ver-rattiin haastattelutietoihin, arvioitiin tulosohjauksen nykytilaa ja tehtiin kehitysehdotuksia. Tulosohjauksesta löytyi useita kehityskohteita. Strategisen toimenpidesuunnitelman edis-tymiseen tulisi tehdä raportointiaikataulu. Tulostavoitteita voisi valmistella enemmän työntekijälähtöisesti ja yksiköille tulisi laatia omat strategiat. Asiakaspalautekyselyä tulisi kehittää, toteuttaa se verkkopohjaisena ja ottaa käyttöön kaikissa yksiköissä. Mittarit tuli-si liittää ydinprosesseihin ja jakaa ne laitos-alue-yksikkö -tasoille. Säännölliset raportit tulisi automatisoida ja antaa niiden tulostusoikeudet käyttäjille. Lisäksi kehittämishankkeita ja projekteja voisi hieman vähentää mutta viedä ne tehokkaammin läpi. Normi- ja informaatio-ohjaus ovat kiinteä osa tulosohjausta. Normiohjaus perustuu pääasiassa säädöksiin ja informaatio-ohjaus tiedolla ohjaamiseen. Informaatio-ohjauksessa tulisi kiinnittää huomiota aluekeskuksen tiedottamiseen, ettei yksiköitä ohjata keskushallinnosta aluekeskuksen ohi. Keskushallinnon tulisi myös päivittää ohjeistukset nopeammin erityisesti lakimuutosten yhteydessä. Myös vastuuta voisi jakaa enemmän alueille. Käyttöön voisi ottaa uuden tiedotuskanavan, esimerkiksi sähköinen uutislehtinen tai info-näytöt taukotiloissa.

Conflicting Memory in Estonia: How Do Estonian Russian-speakers Understand the Events of 1939-40?

This thesis studies the collective memory of the Russian-speaking minority living in Estonia. The minority is exposed to two national narratives regarding the incorporation of Estonia into the Soviet Union in 1940. According to the Estonian narrative, Estonia was occupied and annexed by the Soviet Union while the Soviet-Russian narrative sees the actions to have been legal and voluntary. This thesis firstly examines thoughts the existence of these two opposing narratives evoke among the Russian-speaking minority and secondly it explores whether the views of the minority compare with the two official yet divergent narratives. The study focuses on the second and third generation minority members. The topic belongs to the field of memory studies. The objective is to understand the views the Russian minority have towards the controversial events of the years 1939-40. To accomplish the objectives set, a web-based survey using open-ended and multiple-choice questions was conducted. The open-ended questions addressed the main research questions while the multiple-choice questions contributed to forming a more comprehensive understanding of the subject in question. In order to interpret the data, qualitative content analysis has been applied. Based on the findings, the Russian-speaking minority respondents’ understanding of the events of 1939-40 could be described as fragmented, inconsistent and including viewpoints that resulted from the merger of different storylines. There is no single cohesive or coherent narrative of the past amongst the minority. In addition to that, their views do not generally comply with the narrative of the Russian Federation as often referred to in literature, even though the minority respondents do not want to see the Soviet involvement as critically as the Estonian narrative does. Many respondents conceive the events of 1939-40 as ambiguous revealing the ability to be tolerant and receptive in their views regarding the past.

Ethical leadership as a way to promote work-related well-being

The purpose of this study was to clarify the connections of ethical leadership with the work-related well-being of employees. Additionally, the role of occupational health care in ethical leadership that promotes work-related well- being was analyzed. The objective of the study was to produce knowledge to support the development of ethical leadership and work-related well-being as well as to find ways for occupational health care to support organizations in these actions. The target groups of this study consisted of the managers (N=43) and employees (N=336) working in one organization in the Finnish energy industry. The population was studied in November 2014 using census. The data was gathered with two different web-based surveys containing structured and open questions. The survey for managers consisted of background questions and statements concerning ethical leadership, work-related well-being and occupational health care. The employee questionnaire consisted of questions about background and statements about work-related well-being and ethical leadership. The structured questions were analyzed with SPSS Statistical Program and the open questions using inductive content analysis. At least 80 % of the managers saw their actions as ethical in all but one part of ethical leadership. The work-related well-being of the employees was found best in the area of ability to work (91 % agreed) and lowest in the area of experience of ethical leadership (67 % agreed). The results showed a strong positive connection between ethical leadership and all the components of work- related well-being. The managers and employees were generally quite happy with the services of occupational health care but managers saw some problems with the collaboration with occupational health care. Several ways to improve work-related well-being and collaboration with occupational health care were found. One of the most important things was thought to be offering ways to maintain ability to work and making these actions visible. Investing in ethical leadership and work-related well-being is extremely important for the success of an organization and the societal benefits cannot be forgotten either. The role of occupational health care in promoting the health and well-being of employees is substantial. Occupational health care should offer managers more tools to recognize difficult situations and acting in them as well as encourage managers to seek help from occupational health care without hesitation in problematic situations of leadership.

In search of the interrelatedness of innovation and internationalisation processes in entrepreneurial life science companies

This study is motivated by the question how resource scarce innovative entrepreneurial companies seek and leverage global resources. This study takes a resource-seeking perspective a step forward and suggests that resources that enable the entrepreneurial internationalisation are largely accrued from the early stages of entrepreneurial life; that is from the innovation development. Consequently, this study seeks to explain how innovation and internationalisation processes are interrelated in the entrepreneurial internationalisation. This main objective is approached through three research questions, (1) What role do inter-organisational relationships in innovation have in the entrepreneurial internationalisation process? (2) What kind of inward–outward links do inter-organisational relationships create in the resource-seeking-based entrepreneurial internationalisation process? (3) What kind of capability to collaborate forms in the interaction of inter-organisational relationship deployment? The research design is a mixed methods design that consists of quantitative pilot study and qualitative multiple case study of five entrepreneurial life science companies from Finland and Austria. The findings show that innovation and internationalisation processes are tightly interwoven in pre-internationalisation state. The findings also reveal that the more experienced companies are able to take advantage of complexcross-border inter-organisational relationship structures better than the starting companies. However, very minor evidence was found on inward links translating into outward links in the entrepreneurial internationalisation process, despite the expectation to observe more of these links in the data. Combined intangible-tangible resource-seeking was the most preferred to build links between inward–outward internationalisation but also to develop competence to collaborate. By adopting a resource- instead of market-seeking approach, this study illustrated that internationalisation extends to early stages of innovative companies, and that in high-technology companies’ potentially significant cross-border relationships have started to form long before incorporation. Therefore, these observations justified the firmer inclusion of pre-company history in innovative entrepreneurship studies. The study offers a conceptualisation of entrepreneurial internationalisation that is perceived as a process. The main theoretical contributions are in the areas of international entrepreneurship and in the behavioural process studies of entrepreneurial internationalisation and resource-based internationalisation. The inclusion of the innovation-based discussion, namely the innovation process, in the internationalisation process theories has clearly contributed to the understanding of entrepreneurial internationalisation in the context of international entrepreneurship. Innovation development is a central act of entrepreneurial companies, and neglecting innovation process investigation from entrepreneurial internationalisation leaves potentially influential mechanisms unexplored.

A human-centric service approach for architecting and reengineering global system

Production of a new system in any range is expanding dramatically and new ideas are there upon introduced, the logic stands behind the matter is the growth of application of the internet and granting web-based systems. Before producing a system and distribute to the customer, various aspects should be studied which multiple the profit of the system. The process of productizing a new system from being unprocessed idea until delivers to the final user has been unambiguous. In this thesis, the systematize service in a way that benefits both the customer and provider, along with an effort to establish trust and diminish customer’s risk and increase service productivity are in detail presented. Characteristics of Servitization and Productization as two faces of one coin have been interpreted. Apart from the abovementioned issues state of art, service-oriented architecture (SOA) and New Service Development (NSD) has been included in this report for solving the problem of gradually decline in value of companies.

Software for Transport Accessibility Analysis: The Case of Moscow

In this thesis the process of building a software for transport accessibility analysis is described. The goal was to create a software which is easy to distribute and simple to use for the user without particular background in the field of the geographical data analysis. It was shown that existing tools do not suit for this particular task due to complex interface or significant rendering time. The goal was accomplished by applying modern approaches in the process of building web applications such as maps based on vector tiles, FLUX architecture design pattern and module bundling. It was discovered that vector tiles have considerable advantages over image-based tiles such as faster rendering and real-time styling.

Ethical leadership as a way to promote work-related well-being

The purpose of this study was to clarify the connections of ethical leadership with the work-related well-being of employees. Additionally, the role of occupational health care in ethical leadership that promotes work-related well- being was analyzed. The objective of the study was to produce knowledge to support the development of ethical leadership and work-related well-being as well as to find ways for occupational health care to support organizations in these actions. The target groups of this study consisted of the managers (N=43) and employees (N=336) working in one organization in the Finnish energy industry. The population was studied in November 2014 using census. The data was gathered with two different web-based surveys containing structured and open questions. The survey for managers consisted of background questions and statements concerning ethical leadership, work-related well-being and occupational health care. The employee questionnaire consisted of questions about background and statements about work-related well-being and ethical leadership. The structured questions were analyzed with SPSS Statistical Program and the open questions using inductive content analysis. At least 80 % of the managers saw their actions as ethical in all but one part of ethical leadership. The work-related well-being of the employees was found best in the area of ability to work (91 % agreed) and lowest in the area of experience of ethical leadership (67 % agreed). The results showed a strong positive connection between ethical leadership and all the components of work- related well-being. The managers and employees were generally quite happy with the services of occupational health care but managers saw some problems with the collaboration with occupational health care. Several ways to improve work-related well-being and collaboration with occupational health care were found. One of the most important things was thought to be offering ways to maintain ability to work and making these actions visible. Investing in ethical leadership and work-related well-being is extremely important for the success of an organization and the societal benefits cannot be forgotten either. The role of occupational health care in promoting the health and well-being of employees is substantial. Occupational health care should offer managers more tools to recognize difficult situations and acting in them as well as encourage managers to seek help from occupational health care without hesitation in problematic situations of leadership.