Kustannuslaskentamallin kehittäminen yrityksessä tapahtuvan merkittävän tuotantoinvestoinnin johdosta - Case Isku Yhtymä Oy

Työn tavoitteena oli kehittää case-yrityksen kustannuslaskentamallia tilanteessa, jossa yrityksen tuotanto muuttuu merkittävästi suuren tuotantoinvestoinnin vaikutuksesta. Työ koostuu teoreettisesta kirjallisuuskatsauksesta ja sitä soveltavasta empiirisestä case-tutkimuksesta. Tarkastelun kohteena on yrityksen nykyinen kustannuslaskentamalli ja sen ongelmat. Näitä ongelmia pyritään ratkaisemaan hahmottelemalla uuden kustannuslaskentamallin perusteita. Merkittävin muutos kustannuslaskennassa tapahtui erityisesti välillisten kustannusten allokoinnin kohdalla, jossa useassa merkittävässä kustannuserässä pystyttiin löytämään tapa allokoida kustannukset jopa tuotteille asti. Empiriassa teoriapohjana käytettiin pääasiassa Robert Kaplanin vuonna 2004 luomaa toimintokohtaisen kustannuslaskennan kehittyneempää mallia (TDACB). Case-yrityksen kustannuslaskenta oli perustunut aiemmin standardikustannuslaskentaan ja huomattavien yleiskustannuskertoimien käyttöön. Kehittämällä kustannuslaskentaa, voidaan estää virheellisten päätösten tekeminen ja antaa koko organisaatiolle parempaa kustannusinformaatiota

Pinoamislaitteen suunnittelu vetokoneen jälkeiselle linjalle

Työn tavoitteena oli suunnitella vetokoneen linjalle pinoamislaite. Laitteen tehtävänä on pinota yksittäin vetokoneelta tulevista tuotteista asiakasvaatimusten mukaisia pinoja. Laitteen suunnittelu toteutettiin käyttämällä systemaattisen koneensuunnittelun metodia. Diplomityö rajattiin koskemaan laitteen mekaanisten ratkaisujen suunnittelua. Suunnittelussa huomioitiin linjan asettamat vaatimukset, jotka koskevat sekä tuotantomäärää että tilojen käyttöä. Laitteen suunnittelussa ja mallinnuksessa käytettiin Solidworksin 3D-mallinnusohjelmaa. Mallinnettuja ratkaisuvaihtoehtoja verrattiin keskenään. Parhaiten vaatimusluettelossa esitetyt vaatimukset täyttänyt ratkaisumalli valittiin kehitettäväksi. Suunnitellusta laitteesta valmistettiin työpiirustukset sekä kokoonpanokuvat.

Lightweight, liquid-cooled, direct-drive generator for highpower wind turbines: motivation, concept, and performance

Thesis: A liquid-cooled, direct-drive, permanent-magnet, synchronous generator with helical, double-layer, non-overlapping windings formed from a copper conductor with a coaxial internal coolant conduit offers an excellent combination of attributes to reliably provide economic wind power for the coming generation of wind turbines with power ratings between 5 and 20MW. A generator based on the liquid-cooled architecture proposed here will be reliable and cost effective. Its smaller size and mass will reduce build, transport, and installation costs. Summary: Converting wind energy into electricity and transmitting it to an electrical power grid to supply consumers is a relatively new and rapidly developing method of electricity generation. In the most recent decade, the increase in wind energy’s share of overall energy production has been remarkable. Thousands of land-based and offshore wind turbines have been commissioned around the globe, and thousands more are being planned. The technologies have evolved rapidly and are continuing to evolve, and wind turbine sizes and power ratings are continually increasing. Many of the newer wind turbine designs feature drivetrains based on Direct-Drive, Permanent-Magnet, Synchronous Generators (DD-PMSGs). Being low-speed high-torque machines, the diameters of air-cooled DD-PMSGs become very large to generate higher levels of power. The largest direct-drive wind turbine generator in operation today, rated just below 8MW, is 12m in diameter and approximately 220 tonne. To generate higher powers, traditional DD-PMSGs would need to become extraordinarily large. A 15MW air-cooled direct-drive generator would be of colossal size and tremendous mass and no longer economically viable. One alternative to increasing diameter is instead to increase torque density. In a permanent magnet machine, this is best done by increasing the linear current density of the stator windings. However, greater linear current density results in more Joule heating, and the additional heat cannot be removed practically using a traditional air-cooling approach. Direct liquid cooling is more effective, and when applied directly to the stator windings, higher linear current densities can be sustained leading to substantial increases in torque density. The higher torque density, in turn, makes possible significant reductions in DD-PMSG size. Over the past five years, a multidisciplinary team of researchers has applied a holistic approach to explore the application of liquid cooling to permanent-magnet wind turbine generator design. The approach has considered wind energy markets and the economics of wind power, system reliability, electromagnetic behaviors and design, thermal design and performance, mechanical architecture and behaviors, and the performance modeling of installed wind turbines. This dissertation is based on seven publications that chronicle the work. The primary outcomes are the proposal of a novel generator architecture, a multidisciplinary set of analyses to predict the behaviors, and experimentation to demonstrate some of the key principles and validate the analyses. The proposed generator concept is a direct-drive, surface-magnet, synchronous generator with fractional-slot, duplex-helical, double-layer, non-overlapping windings formed from a copper conductor with a coaxial internal coolant conduit to accommodate liquid coolant flow. The novel liquid-cooling architecture is referred to as LC DD-PMSG. The first of the seven publications summarized in this dissertation discusses the technological and economic benefits and limitations of DD-PMSGs as applied to wind energy. The second publication addresses the long-term reliability of the proposed LC DD-PMSG design. Publication 3 examines the machine’s electromagnetic design, and Publication 4 introduces an optimization tool developed to quickly define basic machine parameters. The static and harmonic behaviors of the stator and rotor wheel structures are the subject of Publication 5. And finally, Publications 6 and 7 examine steady-state and transient thermal behaviors. There have been a number of ancillary concrete outcomes associated with the work including the following. X Intellectual Property (IP) for direct liquid cooling of stator windings via an embedded coaxial coolant conduit, IP for a lightweight wheel structure for lowspeed, high-torque electrical machinery, and IP for numerous other details of the LC DD-PMSG design X Analytical demonstrations of the equivalent reliability of the LC DD-PMSG; validated electromagnetic, thermal, structural, and dynamic prediction models; and an analytical demonstration of the superior partial load efficiency and annual energy output of an LC DD-PMSG design X A set of LC DD-PMSG design guidelines and an analytical tool to establish optimal geometries quickly and early on X Proposed 8 MW LC DD-PMSG concepts for both inner and outer rotor configurations Furthermore, three technologies introduced could be relevant across a broader spectrum of applications. 1) The cost optimization methodology developed as part of this work could be further improved to produce a simple tool to establish base geometries for various electromagnetic machine types. 2) The layered sheet-steel element construction technology used for the LC DD-PMSG stator and rotor wheel structures has potential for a wide range of applications. And finally, 3) the direct liquid-cooling technology could be beneficial in higher speed electromotive applications such as vehicular electric drives.

Silicon-containing species in used lube oil re-refining

Nowadays, the re-refining of the used lube oils has gained worldwide a lot of attention due to the necessity for added environmental protection and increasingly stringent environmental legislation. One of the parameters determining the quality of the produced base oils is the composition of feedstock. Estimation of the chemical composition of the used oil collected from several European locations showed that the hydrocarbon structure of the motor oil is changed insignificantly during its operation and the major part of the changes is accounted for with depleted oil additives. In the lube oil re-refining industry silicon, coming mainly from antifoaming agents, is recognized to be a contaminant generating undesired solid deposits in various locations in the re-refining units. In this thesis, a particular attention was paid to the mechanism of solid product formation during the alkali treatment process of silicon-containing used lube oils. The transformations of a model siloxane, tetramethyldisiloxane (TMDS), were studied in a batch reactor at industrially relevant alkali treatment conditions (low temperature, short reaction time) using different alkali agents. The reaction mechanism involving solid alkali metal silanolates was proposed. The experimental data obtained demonstrated that the solids were dominant products at low temperature and short reaction time. The liquid products in the low temperature reactions were represented mainly by linear siloxanes. The prolongation of reaction time resulted in reduction of solids, whereas both temperature and time increase led to dominance of cyclic products in the reaction mixture. Experiments with the varied reaction time demonstrated that the concentration of cyclic trimer being the dominant in the beginning of the reaction diminished with time, whereas the cyclic tetramer tended to increase. Experiments with lower sodium hydroxide concentration showed the same effect. In addition, a decrease of alkali agent concentration in the initial reaction mixture accelerated TMDS transformation reactions resulting in solely liquid cyclic siloxanes yields. Comparison of sodium and potassium hydroxides applied as an alkali agent demonstrated that potassium hydroxide was more efficient, since the activation energy in KOH presence was almost 2-fold lower than that for sodium hydroxide containing reaction mixture. Application of potassium hydroxide for TMDS transformation at 100° C with 3 hours reaction time resulted in 20 % decrease of solid yields compared to NaOH-containing mixture. Moreover, TMDS transformations in the presence of sodium silanolate applied as an alkali agent led to formation of only liquid products without formation of the undesired solids. On the basis of experimental data and the proposed reaction mechanism, a kinetic model was developed, which provided a satisfactory description of the experimental results. Suitability of the selected siloxane as a relevant model of industrial silicon-containing compounds was verified by investigation of the commercially available antifoam agent in base-catalyzed conditions.

Naudanlanta biokaasulaitosraaka-aineena, käsittely ja logistiikka

Maatalouden lietelannasta saatavien ravinteiden talteenotto ja kierrätys ovat viime aikoina nousseet yhä tärkeämmäksi tavoitteeksi. Ravinteiden tehokas kierrätystapa saadaan ai-kaiseksi käsittelemällä lietelantaa. Lannan käsittelyketjuja on monenlaisia; tässä työssä naudan lannan käsittelyketju muodostuu separoinnista ja mädätyksestä. Tämän diplomityön tarkoituksena oli selvittää naudan lannan mekaanisen separoinnin ja logistiikan kannattavuus märkämädätys- ja kuivamädätyskäsittelyketjussa. Käsittelyketju-jen kannattavuus tai kannattamattomuus on esitetty eri skenaarioissa muodostettujen kus-tannuslaskentojen perusteella. Skenaarioiden kustannuslaskelmat ovat toisiinsa verratta-vissa, jolloin ne voidaan asettaa niin ikään paremmuusjärjestykseen. Viides skenaario ei ole suoraan verrattavissa muihin skenaarioihin, koska siinä lannankäsittelyketjua on tar-kasteltu eri näkökulmasta, keskittämällä suurimmalle maatilalle. Mekaanisista separaattoreista tarkasteltiin työssä ruuvipuristinta, dekantterilinkoa ja ul-koistettua separointipalvelua. Lannan logistiikkakustannuksissa huomioitiin lannan kulje-tusta traktori- ja säiliöautolla tai traktorilla. Separoinnin kustannus liitettiin osaksi logis-tiikkakustannusta. Työn tuloksien perusteella voidaan todeta dekantterilingon separointi-kustannuksen olevan taloudellisesti kannattamattomin johtuen pienestä lantakapasiteetista ja separaattorin korkeasta investointihinnasta. Ravinteiden osalta linko osoittautui tehok-kaimmaksi menetelmäksi erottamaan ravinteet eri jakeisiin. Lannan käsittely separointipalvelulla oli edullisin skenaario, jonka vuosittaiseksi kustan-nukseksi saatiin säiliö- ja kuorma-autolla lantaa kuljetettaessa 58 700 € ja traktorilla kul-jetettaessa 60 400 €. Kallein lannan käsittely oli dekantterilingolla, jonka vuosittaiseksi kustannukseksi saatiin lantaa säiliö- ja kuorma-autolla kuljetettaessa 121 000 € ja trakto-rilla kuljetettaessa 123 300 €. Lannan separointi maatilalla osoittautui kannattavammaksi kuin käsittelemättömän lietteen kuljetus biokaasulaitokselle.

Possibility Of Controlling The Atmosphere Inside A Package Using Microperforation

This work focuses on the study of the determination on the possibilities of controlling the required moisture within the inside of film sealed packages. The task is based on the challenges faced by fresh food producers in actualizing a longer product shelf-life coupled with the growing complex desires coming from consumers in the aspect of quality. One way to realize this is by proper evaluation on the use of the flexible plastic films through permeation measurements on the required amount of moisture penetrating through the plastic film with the application of microperforation. A packaging material requires proper interaction on moisture transmission, between the product and the outside environment. The plastic film material that stands between, fresh fruits, vegetables and the outside environment could have appropriate respiration rates through possible micro holes. This work simulates similar process with the aid of water vapor transmission rate (WVTR) experiment using anhydrous CaCl2 as the desiccant, in studying the WVTR values of various perforated film materials at different conditions of storage (standard, fridge, and tropical conditions). However, the results showed absorption rates of water vapor at various conditions in grams of H2O/m2/24h.

Alkavan yrityksen strategiset vaihtoehdot ja selviytyminen

Työn tavoitteena on soveltaa yrityksen perustamiseen, innovaation diffuusioon ja strategiseen suunnitteluun liittyvää teoriaa Delitaz Oy:n kehitykseen liiketoimintamahdollisuuden havaitsemisesta uudeksi yritykseksi. Työssä etsitään keinoja yrityksen kehittämän innovatiivisen tuotteen saamiseksi nopeammin markkinoille ja lähtökohtia tulevaa liiketoimintasuunnitelman päivitystä varten. Työssä kootaan yhteen uuden yrityksen perustamisen vaiheisiin, selviytymiseen ja menestymiseen liittyvää teoriaa liiketoimintamahdollisuuden havaitsemisesta uuden inno-vatiivisen tuotteen markkinoille tuomiseen ja yrityksen strategiseen suunnitteluun. Tapaus-osiossa perehdytään kohdeyrityksen perustamisen vaiheisiin, toimintaympäristöön, tuotteeseen ja liiketoimintaan. Työn menetelmänä on tapaus- kehittämis- ja toimintatutkimuksen yhdistelmä. Kehittämis- tai toimintatutkimuksen varsinainen käytännön testaamisvaihe jää työn ulkopuolelle, sillä haluttuja muutoksia lähdetään vasta toteuttamaan. Johtopäätöksinä kuvataan yhden liiketoimintamahdollisuuden kehittyminen ideasta tuotteeksi ja teknologiayritykseksi yrityksen perustamisen teoriaan verrattuna ja esitetään keinoja tuotteen markkinoille saamisen nopeuttamiseksi ja mahdollisia strategisia vaihtoehtoja liiketoimintasuunnitelman päivittämiseksi.

Sustainable Development – the Key to Competitiveness CSR as an added value to Alstom’s corporate performance

Corporate social responsibility or CSR is today a widely recognized concept which is receiving in- creasing popularity extremely rapidly, especially in the business world. The pressure on companies to carry out their business practices in ethical manners, which promote the wellbeing of the environment and society, is coming from all directions and all stakeholders. Alstom, a French multinational conglomerate operating in the rail transport and energy industry, is no exception to this norm. This company, which will be used as the case example in this thesis, is being brought to bay in terms of engaging in CSR practices and practicing business with high ethics. It is surely not a negatively conceived phenomenon that CSR is being put on a pedestal – quite the opposite. Instead of corporations practicing CSR only to meet their stakeholder requirements through practicing window dressing, many corporations actually strive to benefit from the practice of corporate social business. In addition to bringing benefit to externals a corporation such as Alstom itself can benefit from being involved in CSR. The purpose of this thesis is to evaluate the current strategic values and the future perspectives of CSR at Alstom and moreover the added value which the practice of CSR could bring Alstom as a business. A set of perspectives from a futures studies viewpoint is looked at, with critical examination of the company’s current corporate practices as well as the CSR related studies and theories written for corporations. Through this, some solutions and practices will be suggested to Alstom in order for it to fully utilize the potential of corporate social business and the value it can bring in the most probable futures that the company is expected to face. By utilizing the Soft Systems Methodology (SSM), a method mainly used in organizations to solve problematic issues in management and policy contexts, a process is developed to see what improvements could be of help in improving Alstom and its way towards involving CSR in its business practices even more than it currently does. Alstom is already deeply involved in the practicing of CSR and its vision has a strong emphasis on this popular concept of today. In order to stay in the game and to use CSR as a competitive advantage to the company, Alstom ought to embed corporate social practices even deeper in its organizational culture by using them as a tool to reduce risk and costs, increasing employee commitment and customer loyalty and to attract socially responsible investors, just to name a few. CSR as a concept is seen to have great potential in the future, an opportunity Alstom will not miss.

Näkökulmia 3D-tulostuksen opetukseen ja koulutukseen

Additive manufacturing, or 3D printing, is globally one of most interesting area in developing of manufacturing technologies. This technology is suitable for fabrication off industrial products and it interests actors in fields of computer sciences, economics, medical sciences and design&arts. Additive manufacturing is often referred as third industrial revolution: first revolution was invention of steam engines in 18th century and second was industrial revolution started by Henry Ford in 1920s. Companies should be able to test suitability of their products for additive manufacturing and 3D printing but also how much better products could be when products are totally re-designed so that all potential of this new technology can be utilized. This is where education has its importance; new generations who enter working life should be educated to know of additive manufacturing and 3D printing, its advantages but also of it limits. There has to be also possibility to educate industry and people already working there, so that industrial implementation could be done successfully. This is especially very valid for Finland. Education is strongly needed so that Finnish industry can maintain its competence in global markets. Role of education is extremely important when a new technology is industrially implemented. Additive manufacturing and 3D printing offers freedom to design new products, production and generally ways of doing things. Development, planning and execution of education for additive manufacturing and 3D printing is challenging as this area develops very fast. New innovations are coming almost every month. Planning of education for additive manufacturing and 3D printing requires collection pieces of data from various of sources. Additive manufacturing and 3D printing industry and its development has to be followed frequently, and material for additive manufacturing and 3D printing has to be renewed frequently.

Continuity of patient care in day surgery

Continuity is a part of high-quality patient care. The purpose of this study was to analyse what factors are important in the continuity of patients’ care, and how well continuity is achieved in different stages of the care of day surgical patients. Day surgery has become significantly more prevalent in the past few decades, and in order for it to be carried out successfully, continuity in care is particularly essential. The study was carried out in two stages. In the first stage (2001–2005) of the study, continuity was examined through a review of literature from the perspective of critical pathways, naming the continuity categories of time flow, coordination flow, caring relationship flow, and information flow. The first stage also entailed an analysis of matters important to the patient and problems concerning the achievement of care continuity, carried out by interviewing 25 day surgical patients. In the second stage (2006–2015), the degree to which the continuity of day surgical patient care was achieved was analysed from the perspective of patients (n=203, 58%) and nurses working in day surgery units (n=83, 69%), and suggestions for developing the continuity of day surgery patient care were made. In this study continuity of care was examined through a review of literature from the perspective of critical pathways, naming the continuity categories of time flow, coordination flow, caring relationship flow, and information flow. Within these categories, several important factors for the patient were found. According to both patients and nurses, continuity of care is generally achieved to a high degree. Continuity of care is improved by patients being acquainted with and meeting the staff attending to them (nurse and surgeon) before and after the operation. From patients’ perspective, there is room for improvement especially in terms of being admitted to care and in the carer-patient relationship. From nurses’ perspective, there is room for improvement in terms of the smoothness of care. Nurses evaluated the continuity of care to be the least successful before and after the operation. An extensive social and health care reform is planned in Finland in the coming years, aiming to enhance social and health care services and to create smoothly functioning service and care. As a topic of further study supporting the development of the service system, it is important to follow the patient’s progress throughout the entire chain of care, e.g. as a case study. On the other hand, there is also a need to study the views of nurses and other health care professionals in health care, e.g. in primary health care.

Measurement of social value creation with non-financial measures

This research examines the concept of social entrepreneurship which is a fairly new business model. In the field of business it has become increasingly popular in recent years. The growing awareness of the environment and concrete examples of impact created by social entrepreneurship have encouraged entrepreneurs to address social problems. Society’s failures are tried to redress as a result of business activities. The purpose of doing business is necessarily no longer generating just profits but business is run in order to make a social change with the profit gained from the operations. Successful social entrepreneurship requires a specific nature, constant creativity and strong desire to make a social change. It requires constant balancing between two major objectives: both financial and non-financial issues need to be considered, but not at the expense of another. While aiming at the social purpose, the business needs to be run in highly competitive markets. Therefore, both factors need equally be integrated into an organization as they are complementary, not exclusionary. Business does not exist without society and society cannot go forward without business. Social entrepreneurship, its value creation, measurement tools and reporting practices are under discussion in this research. An extensive theoretical basis is covered and used to support the findings coming out of the researched case enterprises. The most attention is focused on the concept of Social Return on Investment. The case enterprises are analyzed through the SROI process. Social enterprises are mostly small or medium sized. Naturally this sets some limitations in implementing measurement tools. The question of resources requires the most attention and therefore sets the biggest constraints. However, the size of the company does not determine all – the nature of business and the type of social purpose need to be considered always. The mission may be so concrete and transparent that in all cases any kind of measurement would be useless. Implementing measurement tools may be of great benefit – or a huge financial burden. Thus, the very first thing to carefully consider is the possible need of measuring value creation.

Innovation Ecosystem Perspectives on Financial Services Innovation

The context of financial services has been characterised by changes in the regulatory, technological and societal landscape. Consumers are increasingly interested in mobile payments, crowdfunding and microfinance services, either for themselves or because collaborative consumption is viewed as a more sustainable. Retail branches are re-organised to further meet the expectations of customers, start-ups focusing on technology for financial services (i.e. Fintech) are ever growing and financial services companies reinforce their own innovation practices (e.g. creation of innovation labs or venture capital investment funds). The innovation ecosystem around financial services companies represents the many actors with whom they can co-create and co-produce innovative new services for their customers (or for themselves). The innovation process is no longer a closed internal effort but needs to include external actors from the innovation ecosystem. This topic is especially interesting in a small and open economy where the financial centre takes a prominent place in the economy. The research question is therefore “How does the innovation ecosystem influence the innovation process within financial services companies?”. The influence of the innovation ecosystem on the innovation process within financial service companies mainly comes from its social capital and value creation efforts. However learning to work and exchange in an innovation ecosystem is also expected to influence the innovation process in place. Realizing the potential of the innovation ecosystem requires sufficient capabilities to manage new information coming from the innovation ecosystem. The professional associations provide the necessary coordination among actors in the innovation ecosystem to co-create and appropriate value, while fostering co-evolution within the innovation ecosystem.

Motor Types Comparison Determining Efficiency in Pumping Systems

Pumping, fan and compressor systems consume most of the motor electricity power in both the industrial and services sectors. A variable speed drive brings relevant improvements in a fluid system leading to energy saving that further on can be translated into Mtons reduction of CO 2 emissions. Standards and regulations are being adopted for fluid handling systems to limit the less efficiency pumps out of the European market on the coming years and a greater potential in energy savings is dictated by the Energy Efficiency Index (EEI) requirements for the whole pumping system and integrated pumps. Electric motors also have an International Efficiency (IE) classification in order to introduce higher efficiency motors into the market. In this thesis, the applicability of mid-size common electric motor types to industrial pumping system took place comparing the motor efficiency characteristics with each other and by analyzing the effect of motor dimensioning on the pumping system and its impact in the energy consumption.

The Construction of ‘Disciplinary’ Violence Against Children — Social Workers’, Police Officers’ and Parents’ Rationales

This dissertation examines parental disciplinary violence against children in authority records and in the criminal procedure in Finland. The main aim is to analyze disciplinary violence, how it is defined, and how it is constructed as a crime by social workers, the police, and parents. This dissertation consists of four sub-studies and a summary article. In the first sub-study, I examine how disciplinary violence appears in child welfare documents and analyze the decision-making processes and measures taken by the child welfare workers. The second sub-study, utilizing police interview data, examines police officers’ perceptions of disciplinary violence, its criminalization, and its investigation. In addition to this analysis of police officers’ own perceptions, in the third sub-study, I use reports of crime and pre-trial investigation documents to look at what a typical suspicion of disciplinary violence coming to the attention of the police is and examine the decision-making processes of the police. Utilizing authority data, the fourth sub-study analyzes how parents rationalize the use of disciplinary violence to the authorities investigating these suspicions. The research provides findings that are unprecedented in Finland. Firstly, it was shown that social workers’ decision-making processes in suspicions of disciplinary violence follow three pathways of reasoning, with many factors taken into consideration; and in less than one-third of the cases, a request for criminal investigation has been made to the police. Secondly, it was verified that police officers hold different perceptions of disciplinary violence, and these perceptions have multiple effects on the investigation of these cases and the construction of disciplinary violence as a crime. Thirdly, the analysis of the reports of crime and pre-trial investigation documents showed that almost two-thirds of the cases of disciplinary violence had been sent to a prosecutor by the police and, thus, defined as a crime. However, in many cases, acts of disciplinary violence were often seen as ‘educational, petty one-off incidents’ and a possible trial and punishment for the perpetrator were seen as unreasonable. Fourthly, it was found that parents often try to neutralize and rationalize the violence they have used against their children, for example, either by denying the victim, the criminal intent, or the entire act, or relying on the necessity of the forbidden act. The dissertation concludes that disciplinary violence is defined and constructed in authority policies and practices, first and foremost, by the severity of the act, the nature of the act as continuous or singular, the perceived harm caused by the act to a child, and the perceptions of authorities regarding physical punishment of children. The asymmetrical power setting present in disciplinary violence and parents’ legitimized right to raise and discipline their children partly seem to explain why criminal-law processing of these suspicions of violence and understanding these as crimes is difficult. Finally, this research calls for more coherent and consistent authority practices and policies, achieved by educating authorities and increasing awareness on disciplinary violence, questions the need for a concept like ‘disciplinary’ violence, and suggests more emphasis on unambiguous perceptions of a child’s best interest.

Näin opetan lisäävää valmistusta ja 3D-tulostusta: Pohdintoja uuden teknologian opetuksesta ja koulutuksesta

Additive manufacturing (shortened as AM), or more commonly 3D printing, consists of wide variety of different modern manufacturing technologies. AM is based on direct printing of a digital 3D model to a final product which is fabricated adding material layer by layer. This is from where term additive manufacturing has its origin. It is not only material what is added, but it is also value, properties etc. which are added. AM enables production of different and even better products compared to conventional manufacturing technologies. An estimation of potential of additive manufacturing can be gathered by considering the potential of laser cutting, which is one of the most widely used modern manufacturing technologies. This technique has been used over 40 years, and whole market around this technology is at the moment c. four billion euros and yearly growth is around 10 %. One factor affecting this success of laser cutting is that laser cutting enables radical improvements to products made of flat sheet. AM and 3D printing will do the same for three dimensional parts. Laser devices, which are at the moment used in 3D printing, are globally at the moment only around 1% of all laser devices used in any fabrication technology, so even with a cautious estimate the potential growth of at least 100 % is coming in next few years. Role of education is very important, when this kind of modern technology is industrially implemented. When both generation entering to work life and also generation who has been a while in work life understands new technology, its potential and limitations, this is the point when also product design can be rethought Potential of product design is driving force for wide use of additive manufacturing and 3D printing. Utilization of additive manufacturing and 3D printing is also opportunity for Finland and Finnish industry. This technology can save Finnish manufacturing industry. This technique has stron potential, as Finland has traditionally strong industrial know-how and good ICT knowledge.