Optimization of Transportation System by Tailored Logistics Network: A Case Study in Automotive Industry

This thesis aims to redesign the supply chain system in an automotive industry in order to obtain space reduction in the inventory by using tailored logistics network. The redesigning process by tailored supply chain will combine all possible shipment methods including direct shipment, milk-run, milk-run via distribution center and Kanban delivery. The current supply chain system in Nissan goes rather well when the production volume is in moderate level. However, when the production volume is high, there is a capacity problem in the warehouse to accommodate all delivered parts from suppliers. Hence, the optimization of supply chain system is needed in order to obtain efficient logistics process and effective inventory consumption. The study will use primary data for both qualitative and quantitative approach as the research methods. Qualitative data will be collected by conducting interviews with people related to procurement and inventory control. Quantitative data consists of list of suppliers with their condition in several parameters which will be evaluated and analyzed by using scoring method to assign the most suitable transportation network to each suppliers for improvement of inventory reduction in a cost efficient manner.

Performance Evaluation of Six-Sectored Configuration in Hexagonal WCDMA (UMTS) Cellular Network Layout

The objective of this master's thesis is to evaluate the optimum performance of sixsectored hexagonal layout of WCDMA (UMTS) network and analyze the performance at the optimum point. The maximum coverage and the maximum capacity are the main concern of service providers and it is always a challenging task for them to achieve economically. Because the optimum configuration of a network corresponds to a configuration which minimizes the number of sites required to provide a target service probability in the planning area which in turn reduces the deployment cost. The optimum performance means the maximum cell area and themaximum cell capacity the network can provide at the maximum antenna height satisfying the target service probability. Hexagon layout has been proven as the best layout for the cell deployment. In this thesis work, two different configurations using six-sectored sites have been considered for the performance comparison. In first configuration, each antenna is directed towards each corner of hexagon, whereas in second configurationeach antenna is directed towards each side of hexagon. The net difference in the configurations is the 30 degree rotation of antenna direction. The only indoor users in a flat and smooth semi-urban environment area have been considered for the simulation purpose where the traffic distribution is 100 Erl/km2 with 12.2 kbps speech service having maximum mobile speed of 3 km/hr. The simulation results indicate that a similar performance can be achieved in both the configurations, that is, a maximum of 947 m cellrange at antenna height of 49.5 m can be achieved when the antennas are directed towards the corner of hexagon, whereas 943.3 m cell range atantenna height of 54 m can be achieved when the antennas are directed towards the side of hexagon. However, from the interference point of view the first configuration provides better results. The simulation results also show that the network is coverage limited in both the uplink and downlink direction at the optimum point.

Distribution systems of the food sector in Russia: the perspective of Finnish food industry

Finnish food producers' trade with Russia has experienced profound changes since the collapse of the Soviet Union. Simultaneously, the distribution systems of foodstuffs have changed remarkably. This study sheds some light into these changes and analyses the current situation in distribution systems of foodstuffs in Russia. In addition, the study discusses the possibilities of Finnish food producers to get more of their products to the shelves of Russian food retail stores. Before the 1998 financial crisis, the import of foreign foodstuffs was booming in Russia due to the overvalued rouble. As a result of the financial crisis, food import collapsed. The export of Finnish foodstuffs to Russia has been slowly recovering during the past few years, but in the most important product categories the pre-crisis levels have so far not been reached and maybe will not be reached. In certain product categories the growth has been only marginal. It seems that starting localproduction will become increasingly important in the future. This is further encouraged by the fact that Russian consumers favour domestic food products. Russian consumers are very price conscious and demand quality in food products. The perceived price-quality ratio is an important criterion in the purchase decision.The majority of foodstuff retail is still conducted via unorganised forms of trade (e.g. kiosks and marketplaces) but modern retail chains are developing at a fast pace in Russia. They are also expected to dominate the retail trade in foodstuffs over the unorganised forms of trade in the future. This will change the distribution systems as well. The retail chains are trying to shorten the distribution chain, similarly to what has been seen in the Western countries. This together with the strengthening of retail chains is likely to shrink the role of wholesalers, as the chains increasingly want to work directly with the producers. Many large retail chains are acquiring or have already acquired a distribution centre or centres in order to boost efficiency and control the flow of products. The strengthening of the retail chains also gives them power in negotiations, which the producers and distributors have to adjust to. For example store entry fees and retail chains' own private label products pose challenges to the food producers. In the food production sector the competition is fierce, as large Russianand foreign producers want to ensure their piece of the market. The largest producers utilise their size: they invest in big marketing campaigns and are willing to pay high entry fees to retail chains in order to secure a place on the store shelves and to build a strong brand in Russia. This complicates the situation from the viewpoint of small producers. Currently, the most popular type of distribution system among the interviewed Finnish food producers is based on a network of local distributors. There is, however, a strong consensus on the importanceof starting local production in order to be a serious actor in Russia in the future. Factors that hinder the starting of local production include the lack of local infrastructure and qualified staff, and the low risk tolerance of Finnish firms. Major barriers for entry in Russia are the actions of authorities, fierce competition, fragmented market and Finnish producers' heavy production costs. The suggested strategies for increasing the market share include focusing geographically or segment-wise, introducing new products, starting local production, andcooperation between Finnish producers. Smallness was one reason why Finnish producers had to cut down their operations in Russia due to the 1998 crisis. Smaller producers had fewer resources to tolerate losses during the period of crisis. Smallness is reflected also on trade negotiations with retail chains and distributors. It makes it harder to cope with the store entry fees and to differentiatefrom the mass of products propped up by expensive advertising. Finally, it makes it harder for Finnish producers to start or expand local production, as it is more difficult for a small producer to get financing and to tolerate the increased risks. Compensating for the smallness might become the crucial factor determining the future success of Finnish food producers in the Russian market.

Patents in the Information and Communications Technology Sector - Development Trends, Problem Areas and Pressures for Change

The patent system was created for the purpose of promoting innovation by granting the inventors a legally defined right to exclude others in return for public disclosure. Today, patents are being applied and granted in greater numbers than ever, particularly in new areas such as biotechnology and information andcommunications technology (ICT), in which research and development (R&D) investments are also high. At the same time, the patent system has been heavily criticized. It has been claimed that it discourages rather than encourages the introduction of new products and processes, particularly in areas that develop quickly, lack one-product-one-patent correlation, and in which theemergence of patent thickets is characteristic. A further concern, which is particularly acute in the U.S., is the granting of so-called 'bad patents', i.e. patents that do not factually fulfil the patentability criteria. From the perspective of technology-intensive companies, patents could,irrespective of the above, be described as the most significant intellectual property right (IPR), having the potential of being used to protect products and processes from imitation, to limit competitors' freedom-to-operate, to provide such freedom to the company in question, and to exchange ideas with others. In fact, patents define the boundaries of ownership in relation to certain technologies. They may be sold or licensed on their ownor they may be components of all sorts of technology acquisition and licensing arrangements. Moreover, with the possibility of patenting business-method inventions in the U.S., patents are becoming increasingly important for companies basing their businesses on services. The value of patents is dependent on the value of the invention it claims, and how it is commercialized. Thus, most of them are worth very little, and most inventions are not worth patenting: it may be possible to protect them in other ways, and the costs of protection may exceed the benefits. Moreover, instead of making all inventions proprietary and seeking to appropriate as highreturns on investments as possible through patent enforcement, it is sometimes better to allow some of them to be disseminated freely in order to maximize market penetration. In fact, the ideology of openness is well established in the software sector, which has been the breeding ground for the open-source movement, for instance. Furthermore, industries, such as ICT, that benefit from network effects do not shun the idea of setting open standards or opening up their proprietary interfaces to allow everyone todesign products and services that are interoperable with theirs. The problem is that even though patents do not, strictly speaking, prevent access to protected technologies, they have the potential of doing so, and conflicts of interest are not rare. The primary aim of this dissertation is to increase understanding of the dynamics and controversies of the U.S. and European patent systems, with the focus on the ICT sector. The study consists of three parts. The first part introduces the research topic and the overall results of the dissertation. The second part comprises a publication in which academic, political, legal and business developments that concern software and business-method patents are investigated, and contentiousareas are identified. The third part examines the problems with patents and open standards both of which carry significant economic weight inthe ICT sector. Here, the focus is on so-called submarine patents, i.e. patentsthat remain unnoticed during the standardization process and then emerge after the standard has been set. The factors that contribute to the problems are documented and the practical and juridical options for alleviating them are assessed. In total, the dissertation provides a good overview of the challenges and pressures for change the patent system is facing,and of how these challenges are reflected in standard setting.

Service Architecture in Mobile IP Telephony Network

Uudet palvelut ovat tarkeinta, mita asiakkaat odottavat uudelta teknologialta.Se on paaasiallinen syy siihen, etta asiakkaat ovat valmiita maksamaan uudesta teknologiasta ja kayttamaan sita. Sen vuoksi uuden verkon tuoma uusi palveluarkkitehtuuri on tarkea koko projektin onnistumiselle. Tama dokumentti keskittyy kolmannen sukupolven matkapuhelinverkkojen palveluarkkitehtuuriin, jonka viitemallista annetaan kuvaus. Verkon palvelut esitellaan ja kuvaillaan. Toteutukseen liittyvia asioita selostetaan. USA:n markkinoilla tarvittava WIN konsepti kuvataan ja sen toteutuksesta annetaan myos kuvaus. Lopussa kuvataan Pre-Paid tilaajien laskutustietojen kasittelya WIN konseptissa elvytystilanteessa.

IP Multicast in Future Mobile Networks

Erilaisten IP-pohjaisten palvelujen käyttö lisääntyy jatkuvasti samalla, kun käyttäjistä tulee yhä liikkuvaisempia. Tästä syystä IP- protokolla tulee väistämättä myös mobiiliverkkoihin. Tässä diplomityössä tutkitaan mobiliteetin IP multcastingiin tuomia ongelmia ja simuloidaan niitä Network Simulatoria käyttäen. Pääpaino on ongelmalla, joka aiheutuu multicast- ryhmänmuodostusviiveestä. Tätä ongelmaa simuloidaan, jotta viiveen, mobiilikäyttäjien palveluunsaapumistaajuuden ja Scalable Reliable Multicast (SRM) protokollan ajastinarvojen asetusten vaikutus repair request- pakettien määrään ja sitä kautta suoritettavien uudelleenlähetysten määrään selviäisi. Eri parametrien vaikutuksen tutkimiseksi esitetään simulaatiotuloksia varioiduilla parametreillä käyttäen CDF- käyriä. Tulosten perusteella merkittävin tekijä uudelleenlähetyspyyntöjen kannalta on protokollan ajastimien arvot ja haluttu palvelun taso, viiveen merkityksen jäädessä vähäiseksi. Työn lopuksi tutkitaan SRM- protokollan soveltuvuutta mobiiliverkkoihin ja pohditaan vaihtoehtoja toiminnan parantamiseksi.

Radio Resource Management across UMTS Radio Network Subsystems

UMTS (Universal Mobile Telecommunication System), esimerkkinä kolmannen sukupolven matkapuhelinjärjestelmästä pyrkii toistamaan GSM:n (Global System for Mobile Communications) menestyksen. UMTS:n kaupallinen toiminta on parhaillaan alkamassa ja ensimmäinen kaupallinen verkko on jo aloittanut toimintansa Japanissa. Tämä diplomityö antaa yleiskuvan UMTS:stä keskittyen radioverkkojärjestelmän (UMTS Terrestrial Radio Access Network,UTRAN) radioresurssien hallintaan (Radio Resource Management, RRM). Työssä kuvataan radiorajapintojen toimintaa, mutta diplomityön pääaiheena on kuitenkin radioresurssien hallinta UMTS radioaliverkkojärjestelmien ylitse. Radioresurssien hallinta pitää sisällään joukon proseduureja, jotka vaikuttavat koko UTRAN:in rakenteen lävitse. On hyvin tärkeää saavuttaa oikea toiminnallisuus hajautettujen radioresurssien hallintaan jotta voitaisiin saavuttaa paras yhteyden laatu loppukäyttäjälle. Työssä käydään yksityiskohtaisesti lävitse radioresurssien hallinnan perusperiaatteet ja joukko proseduureja. RNSAP (Radio Network Subsystem Application Part) protokollaa tarkastellaan työssä esimerkkinä protokollasta joka osallistuu radioresurssien hallintaprosessiin.

The role of Bluetooth technology in transforming the value network of ICT industry

Tutkimuksen tavoitteena oli selvittää miten Bluetooth-teknologia voi vaikuttaa ICT-alan arvoverkkoon ja alan toimijoiden rooleihin. Tutkimuksessa käytettiin kvalitatiivisia menetelmiä ja siinä oli piirteitä tulevaisuuden tutkimuksesta, koska myös eksploratiivisia menetelmiä käytettiin. Tutkimus perustui laajalti kirjallisuuteen ja artikkeleihin, joiden perusteella muodostettiin skenaarioita ICT-alan tulevaisuuden arvoverkosta. Tutkimus sisälsi myös empiirisen osion, jossa järjestettiin kaksi ryhmäkeskustelua, joissa alan toimijat keskustelivat muodostetuista skenaarioista sekä yleisemmin Bluetoothin vaikutuksista arvoverkkoon. Tutkimuksen mukaan ICT-alan arvoverkko tulevaisuudessa on rakenteeltaan strateginen arvoverkko, jota johtaa eri toimija erilaisissa markkinatilanteissa. Verkon strateginen keskus voi muuttua ajan kuluessa kun Bluetoothin sovelluskohteet lisääntyvät ja se voi vaihdella markkina-alueesta toiseen. Bluetooth luo uuden kommunikaatiokanavan nykyisten rinnalle ja se voi paikallisesti korvata nykyisten kanavien käytön tiedon siirrossa. Bluetooth voi synnyttää lukuisia uusia liiketoimintamahdollisuuksia ja sen avulla voidaan tuottaa lisäarvopalveluita. Suurimpien muutosten voidaan olettaa koskevan teleoperaattoreiden ja sisällöntuottajien liiketoimintaa.

Digital printing delivering value to the value network: CASE: STORA ENSO OYJ

Tutkielman tavoitteena oli tutkia, millaista arvoa digitaalinen painatusmenetelmä tuo yrityksen arvoverkostoon. Teoriaosassa tavoite oli rakentaa digitaalipainatuksen arvoverkostoa tutkien kirjallisuutta liittyen arvoketju- ja arvoverkostoajatteluun. Myös aiemmat tutkimukset ja kirjallisuus liittyen digitaalipainatukseen rakensivat osaltaan teoreettisen viitekehyksen muodostumista. Aiemmat tutkimukset digitaalisen painomenetelmän mahdollisuuksista ovat hyvin tekniikkapainotteisia, siksi tämä tutkimus liittyy enemmän kaupallisiin mahdollisuuksiin. Empiirinen osio tutkimuksesta tehtiin kvalitatiivisena case -tutkimuksena, johon sisältyi yksi alayksikkö. Eli tutkittiin yhtä casea, jossa oli kaksi osapuolta. Tutkielma liittyy kiinteästi Stora Enson ja Valion väliseen digipainatus-projektiin, joka käynnistettiin helmikuussa 2001. Tutkielman teemahaastatteluihin valittiin henkilöt tästä projektiryhmästä. Projektiryhmän mielipiteitä ja havaintoja hyödyntäen pyrittiin löytämään tukea ja eroavaisuuksia teoriaosan muodostamaan viitekehykseen ja informaatioon. Empiirinen osuus tuki teoriaosassa esittämiä väittämiä hyvin, mutta myös muutamia uusia havaintoja esiintyi. Tutkimusongelmaan löydettiin monia vastauksia: digitaalipainatus luo arvoa yrityksen jakeluketjuun vähentämällä varastoja ja nopeuttamalla toimituksia. Jäätelöpakkausten markkinointi on aivan uuden haasteen edessä, koska mahdollisuudet kasvavat digitaalipainatuksen myötä huomattavasti. Kartongin valmistajalle arvo tulee parempien tuotteiden kautta, joista saa myös paremman tuoton. Digitaalipainatuksen arvoverkostossa tulee tapahtumaan muutoksia jatkossa, eri osapuolten roolit saattavat muuttua radikaalisti. Kuka hoitaa painatusta ja miten?

Platform Architectures for Policy-Based Network Access Control

Tämä diplomityö käsittelee sääntöpohjaisen verkkoon pääsyn hallinnan (NAC) ratkaisuja arkkitehtonisesta näkökulmasta. Työssä käydään läpi Trusted Computing Groupin, Microsoft Corporationin, Juniper Networksin sekä Cisco Systemsin NAC-ratkaisuja. NAC koostuu joukosta uusia sekä jo olemassa olevia teknologioita, jotka auttavat ennalta määriteltyyn sääntökantaan perustuen hallitsemaan suojattuun verkkoon pyrkivien laitteiden tietoliikenneyhteyksiä. Käyttäjän tunnistamisen lisäksi NAC pystyy rajoittamaan verkkoon pääsyä laitekohtaisten ominaisuuksien perusteella, esimerkiksi virustunnisteisiin ja käyttöjärjestelmäpäivityksiin liittyen ja paikkaamaan tietyin rajoituksin näissä esiintyviä puutteita verkkoon pääsyn sallimiseksi. NAC on verraten uusi käsite, jolta puuttuu tarkka määritelmä. Tästä johtuen nykymarkkinoilla myydään ominaisuuksiltaan puutteellisia tuotteita NAC-nimikkeellä. Standardointi eri valmistajien NAC-komponenttien yhteentoimivuuden takaamiseksi on meneillään, minkä perusteella ratkaisut voidaan jakaa joko avoimia standardeja tai valmistajakohtaisia standardeja noudattaviksi. Esitellyt NAC-ratkaisut noudattavat standardeja joko rajoitetusti tai eivät lainkaan. Mikään läpikäydyistä ratkaisuista ei ole täydellinen NAC, mutta Juniper Networksin ratkaisu nousee niistä potentiaalisimmaksi jatkokehityksen ja -tutkimuksen kohteeksi TietoEnator Processing & Networks Oy:lle. Eräs keskeinen ongelma NAC-konseptissa on työaseman tietoverkolle toimittama mahdollisesti valheellinen tietoturvatarkistuksen tulos, minkä perusteella pääsyä osittain hallitaan. Muun muassa tähän ongelmaan ratkaisuna voisi olla jo nykytietokoneista löytyvä TPM-siru, mikä takaa tiedon oikeellisuuden ja koskemattomuuden.

Hajautetun sähköntuotannon verkostovaikutukset

Tässä kandidaatintyössä on käsitelty hajautetun sähköntuotannon verkostovaikutuksia eri näkökulmista. Työssä on esitelty keskeisimmät sähkötekniset vaikutukset jakeluverkkoon ja tarkasteltu vaikutuksia suojauksen, käyttövarmuuden, verkkoliiketoiminnan ja suunnittelun näkökulmasta. Tarkastelu osuuden lopuksi on esitetty yksinkertainen esimerkki pienvoimalan liittämisen vaikutuksista jakeluverkkoon. Työn lopuksi on otettu katsaus tuleviin vaikutuksiin tuotantoyksiköiden lisääntyessä jakeluverkoissa. Hajautettu sähköntuotanto mahdollistaa paikallisten energiavarojen hyödyntämisen sähköntuotantoon jakeluverkon alueella. Tämä tarkoittaa, että siirtoetäisyydet pienenevät, jolloin häviöt saadaan minimoitua. Haittapuolena tällaisessa järjestelmässä on epävarmuus jakeluverkon ja tuotantoyksiköiden käyttäytymisestä eri tilanteissa, kuten myös jännitteen nousu. Suojauksen toimivuus on myös suuri ongelma, koska sen täytyy toimia riippumatta siitä onko voimala verkossa vai ei. Suojauksen toiminta hajautetun tuotannon yhteydessä on epävarmaa ja selvästi tällä hetkellä suurin este järjestelmän laajempaan hyödyntämiseen.

Impact of unsymmetrical loads in distribution networks

Since it is virtually impossible to balance loads in three-phase system, unbalance in a varying degree exists almost in all distribution networks. The aim of the thesis is to analyze the impact of this unbalance subject to different configurations of distribution system and winding connection of the supplying transformer. Also impact of the voltage unbalance on the equipment is investigated. In order to make the investigation more visual, the following calculations have been conducted: - Unsymmetrical load in four-wire star connected network - Unsymmetrical load in four-wire star connected network with broken zero conductor (or three-wire network). - Unsymmetrical load when the supplying transformer is so-called zigzag transformer. PDF created

An analytic approach to distribution logistics strategic management

Logistics management is increasingly being recognised by many companies to be of critical concern. The logistics function includes directly or indirectly many of the new areas for achieving or maintaining competitive advantage that companies have been forced to develop due to increasing competitive pressures. The key to achieving a competitive advantage is to manage the logistics function strategically which involves determining the most cost effective method of providing the necessary customer service levels from the many combinations of operating procedures in the areas of transportation, warehousing, order processing and information systems, production, and inventory management. In this thesis, a comprehensive distribution logistics strategic management process is formed by integrating the periodic strategic planning process with a continuous strategic issues management process. Strategic planning is used for defining the basic objectives for a company and assuring co operation and synergy between the different functions of a company while strategic issues management is used on a continuous basis in order to deal with environmental and internal turbulence. The strategic planning subprocess consists of the following main phases: (1) situational analyses, (2) defining the vision and strategic goals for the logistics function, (3) determining objectives and strategies, (4) drawing up tactical action plans, and (5) evaluating the implementation of the plans and making the needed adjustments. The aim of the strategic issues management subprocess is to continuously scan the environment and the organisation for early identification of the issues having a significant impact on the logistics function using the following steps: (1) the identification of trends, (2) assessing the impact and urgency of the identified trends, (3) assigning priorities to the issues, and (4) planning responses to the, issues. The Analytic Hierarchy Process (AHP) is a systematic procedure for structuring any problem. AHP is based on the following three principles: decomposition, comparative judgements, and synthesis of priorities. AHP starts by decomposing a complex, multicriteria problem into a hierarchy where each level consists of a few manageable elements which are then decomposed into another set of elements. The second step is to use a measurement methodology to establish priorities among the elements within each level of the hierarchy. The third step in using AHP is to synthesise the priorities of the elements to establish the overall priorities for the decision alternatives. In this thesis, decision support systems are developed for different areas of distribution logistics strategic management by applying the Analytic Hierarchy Process. The areas covered are: (1) logistics strategic issues management, (2) planning of logistic structure, (3) warehouse site selection, (4) inventory forecasting, (5) defining logistic action and development plans, (6) choosing a distribution logistics strategy, (7) analysing and selecting transport service providers, (8) defining the logistic vision and strategic goals, (9) benchmarking logistic performance, and (10) logistic service management. The thesis demonstrates the potential of AHP as a systematic and analytic approach to distribution logistics strategic management.

Web 2.0 technology assisted global knowledge network as an organizations key asset

Aim of the Thesis is to study and understand the theoretical concept of Metanational corporation and understand how the Web 2.0 technologies can be used to support the theory. Empiric part of the study compares the theory to the case company’s current situation Goal of theoretical framework is to show how the Web 2.0 technologies can be used in the three levels of the Metanational corporation. In order to do this, knowledge management and more accurately knowledge transferring is studied to understand what is needed from the Web 2.0 technologies in the different functions and operations of the Metanational corporation. Final synthesis of the theoretical framework is to present a model where the Web 2.0 technologies are placed on the levels of the Metanational corporation. Empirical part of the study is based on interviews made in the case company. Aim of the interviews is to understand the current state of the company related to the theoretical framework. Based on the interviews, the differences between the theoretical concept and the case company are presented and studied. Finally the study presents the found problem areas, and where the adoption of the Web 2.0 tools is seen as beneficiary, based on the interviews and theoretical framework.

Strategic Development of Electricity Distribution Networks – Concept and Methods

Strategic development of distribution networks plays a key role in the asset management in electricity distribution companies. Owing to the capital-intensive nature of the field and longspan operations of companies, the significance of a strategy is emphasised. A well-devised strategy combines awareness of challenges posed by the operating environment and the future targets of the distribution company. Economic regulation, ageing infrastructure, scarcity of resources and tightening supply requirements with challenges created by the climate change put a pressure on the strategy work. On the other hand, technology development related to network automation and underground cabling assists in answering these challenges. This dissertation aims at developing process knowledge and establishing a methodological framework by which key issues related to network development can be addressed. Moreover, the work develops tools by which the effects of changes in the operating environment on the distribution business can be analysed in the strategy work. To this end, the work discusses certain characteristics of the distribution business and describes the strategy process at a principle level. Further, the work defines the subtasks in the strategy process and presents the key elements in the strategy work and long-term network planning. The work delineates the factors having either a direct or indirect effect on strategic planning and development needs in the networks; in particular, outage costs constitute an important part of the economic regulation of the distribution business, reliability being thus a key driver in network planning. The dissertation describes the methodology and tools applied to cost and reliability analyses in the strategy work. The work focuses on determination of the techno-economic feasibility of different network development technologies; these feasibility surveys are linked to the economic regulation model of the distribution business, in particular from the viewpoint of reliability of electricity supply and allowed return. The work introduces the asset management system developed for research purposes and to support the strategy work, the calculation elements of the system and initial data used in the network analysis. The key elements of this asset management system are utilised in the dissertation. Finally, the study addresses the stages of strategic decision-making and compilation of investment strategies. Further, the work illustrates implementation of strategic planning in an actual distribution company environment.