A reaction engineering approach to homogeneously catalyzed glycerol hydrochlorination

The production of biodiesel through transesterification has created a surplus of glycerol on the international market. In few years, glycerol has become an inexpensive and abundant raw material, subject to numerous plausible valorisation strategies. Glycerol hydrochlorination stands out as an economically attractive alternative to the production of biobased epichlorohydrin, an important raw material for the manufacturing of epoxy resins and plasticizers. Glycerol hydrochlorination using gaseous hydrogen chloride (HCl) was studied from a reaction engineering viewpoint. Firstly, a more general and rigorous kinetic model was derived based on a consistent reaction mechanism proposed in the literature. The model was validated with experimental data reported in the literature as well as with new data of our own. Semi-batch experiments were conducted in which the influence of the stirring speed, HCl partial pressure, catalyst concentration and temperature were thoroughly analysed and discussed. Acetic acid was used as a homogeneous catalyst for the experiments. For the first time, it was demonstrated that the liquid-phase volume undergoes a significant increase due to the accumulation of HCl in the liquid phase. Novel and relevant features concerning hydrochlorination kinetics, HCl solubility and mass transfer were investigated. An extended reaction mechanism was proposed and a new kinetic model was derived. The model was tested with the experimental data by means of regression analysis, in which kinetic and mass transfer parameters were successfully estimated. A dimensionless number, called Catalyst Modulus, was proposed as a tool for corroborating the kinetic model. Reactive flash distillation experiments were conducted to check the commonly accepted hypothesis that removal of water should enhance the glycerol hydrochlorination kinetics. The performance of the reactive flash distillation experiments were compared to the semi-batch data previously obtained. An unforeseen effect was observed once the water was let to be stripped out from the liquid phase, exposing a strong correlation between the HCl liquid uptake and the presence of water in the system. Water has revealed to play an important role also in the HCl dissociation: as water was removed, the dissociation of HCl was diminished, which had a retarding effect on the reaction kinetics. In order to obtain a further insight on the influence of water on the hydrochlorination reaction, extra semi-batch experiments were conducted in which initial amounts of water and the desired product were added. This study revealed the possibility to use the desired product as an ideal “solvent” for the glycerol hydrochlorination process. A co-current bubble column was used to investigate the glycerol hydrochlorination process under continuous operation. The influence of liquid flow rate, gas flow rate, temperature and catalyst concentration on the glycerol conversion and product distribution was studied. The fluid dynamics of the system showed a remarkable behaviour, which was carefully investigated and described. Highspeed camera images and residence time distribution experiments were conducted to collect relevant information about the flow conditions inside the tube. A model based on the axial dispersion concept was proposed and confronted with the experimental data. The kinetic and solubility parameters estimated from the semi-batch experiments were successfully used in the description of mass transfer and fluid dynamics of the bubble column reactor. In light of the results brought by the present work, the glycerol hydrochlorination reaction mechanism has been finally clarified. It has been demonstrated that the reactive distillation technology may cause drawbacks to the glycerol hydrochlorination reaction rate under certain conditions. Furthermore, continuous reactor technology showed a high selectivity towards monochlorohydrins, whilst semibatch technology was demonstrated to be more efficient towards the production of dichlorohydrins. Based on the novel and revealing discoveries brought by the present work, many insightful suggestions are made towards the improvement of the production of αγ-dichlorohydrin on an industrial scale.

Moving lipids : ceramides, glycosphingolipids and the glycolipid transfer protein

Lipid movement in cells occurs by a variety of methods. Lipids diffuse freely along the lateral plane of a membrane and can translocate between the lipid leaflets, either spontaneously or with the help of enzymes. Lipid translocation between the different cellular compartments predominantly takes place through vesicular transport. Specialized lipid transport proteins (LTPs) have also emerged as important players in lipid movement, as well as other cellular processes. In this thesis we have studied the glycolipid transport protein (GLTP), a protein that transports glycosphingolipids (GSLs). While the in vitro properties of GLTP have been well characterized, its cell biological role remains elusive. By altering GSL and GLTP levels in cells, we have extracted clues towards the protein's function. Based on the results presented in this thesis and in previous works, we hypothesize that GLTP is involved in the GSL homeostasis in cells. GLTP most likely functions as a transporter or sensor of newly synthesized glucosylceramide (GlcCer), at or near the site of GlcCer synthesis. GLTP also seems to be involved in the synthesis of globotriacylceramide, perhaps in a manner that is similar to that of the fourphosphate adaptor protein 2, another GlcCer-transporting LTP. Additionally, we have developed and studied a novel method of introducing ceramides to cells, using a solvent-free approach. Ceramides are important lipids that are implicated in several cellular functions. Their role as proapoptotic molecules is particularly evident. Ceramides form stable bilayer structures when complexed with cholesterol phosphocholine (CholPC), a large-headgroup sterol. By adding ceramide/CholPC complexes to the growth medium, various chain length ceramides were successfully delivered to cells in culture. The uptake rate was dependent on the chain length of the ceramide, where shorter lipids were internalized more quickly. The rate of uptake also determined how the cells metabolised the ceramides. Faster uptake favored conversion of ceramide to GlcCer, whereas slower delivery resulted mainly in breakdown of the lipid.

Optimal Recycling Combination of Ash in South-East Finland

The present world energy production is heavily relying on the combustion of solid fuels like coals, peat, biomass, municipal solid waste, whereas the share of renewable fuels is anticipated to increase in the future to mitigate climate change. In Finland, peat and wood are widely used for energy production. In any case, the combustion of solid fuels results in generation of several types of thermal conversion residues, such as bottom ash, fly ash, and boiler slag. The predominant residue type is determined by the incineration technology applied, while its composition is primarily relevant to the composition of fuels combusted. An extensive research has been conducted on technical suitability of ash for multiple recycling methods. Most of attention was drawn to the recycling of the coal combustion residues, as coal is the primary solid fuel consumed globally. The recycling methods of coal residues include utilization in a cement industry, in concrete manufacturing, and mine backfilling, to name few. Biomass combustion residues were also studied to some extent with forest fertilization, road construction, and road stabilization being the predominant utilization options. Lastly, residues form municipal solid waste incineration attracted more attention recently following the growing number of waste incineration plants globally. The recycling methods of waste incineration residues are the most limited due to its hazardous nature and varying composition, and include, among others, landfill construction, road construction, mine backfilling. In the study, environmental and economic aspects of multiple recycling options of thermal conversion residues generated within a case-study area were studied. The case-study area was South-East Finland. The environmental analysis was performed using an internationally recognized methodology — life cycle assessment. Economic assessment was conducted applying a widely used methodology — cost-benefit analysis. Finally, the results of the analyses were combined to enable easier comparison of the recycling methods. The recycling methods included the use of ash in forest fertilization, road construction, road stabilization, and landfill construction. Ash landfilling was set as a baseline scenario. Quantitative data about the amounts of ash generated and its composition was obtained from companies, their environmental reports, technical reports and other previously published literature. Overall, the amount of ash in the case-study area was 101 700 t. However, the data about 58 400 t of fly ash and 35 100 t of bottom ash and boiler slag were included in the study due to lack of data about leaching of heavy metals in some cases. The recycling methods were modelled according to the scientific studies published previously. Overall, the results of the study indicated that ash utilization for fertilization and neutralization of 17 600 ha of forest was the most economically beneficial method, which resulted in the net present value increase by 58% compared to ash landfilling. Regarding the environmental impact, the use of ash in the construction of 11 km of roads was the most attractive method with decreased environmental impact of 13% compared to ash landfilling. The least preferred method was the use of ash for landfill construction since it only enabled 11% increase of net present value, while inducing additional 1% of negative impact on the environment. Therefore, a following recycling route was proposed in the study. Where possible and legally acceptable, recycle fly and bottom ash for forest fertilization, which has strictest requirements out of all studied methods. If the quality of fly ash is not suitable for forest fertilization, then it should be utilized, first, in paved road construction, second, in road stabilization. Bottom ash not suitable for forest fertilization, as well as boiler slag, should be used in landfill construction. Landfilling should only be practiced when recycling by either of the methods is not possible due to legal requirements or there is not enough demand on the market. Current demand on ash and possible changes in the future were assessed in the study. Currently, the area of forest fertilized in the case-study are is only 451 ha, whereas about 17 600 ha of forest could be fertilized with ash generated in the region. Provided that the average forest fertilizing values in Finland are higher and the area treated with fellings is about 40 000 ha, the amount of ash utilized in forest fertilization could be increased. Regarding road construction, no new projects launched by the Center of Economic Development, Transport and the Environment in the case-study area were identified. A potential application can be found in the construction of private roads. However, no centralized data about such projects is available. The use of ash in stabilization of forest roads is not expected to increased in the future with a current downwards trend in the length of forest roads built. Finally, the use of ash in landfill construction is not a promising option due to the reducing number of landfills in operation in Finland.

NEGOTIATING IN FINNISH GROCERY RETAIL - Negotiation Narratives of S-group, Kesko and Lidl

In this research retail negotiations are explored through the question: What characteristics are distinctive to negotiating in Finnish grocery retail trade? To shed light on the research question I interviewed experienced retail negotiators and mapped out the most important characteristics of the retail negotiations. I described through examples the most prominent challenges negotiators face in their negotiations and elaborated what kind of tools the experienced negotiators use to overcome those challenges. The research results add up to a groundwork frame for retail negotiations with which further research can be more easily directed to any area of interest in the Finnish grocery retail negotiations. The framework can give ideas or frames for further research, or function as a general guideline of factors to consider when negotiating in Finnish retail field. The results were divided into 3 sections: Characteristics, Challenges and Tools. Different negotiation models help negotiators and researchers understand negotiation dynamics. This research adds to that pool by focusing on elements essential to consider specifically in the context of Finnish retail. Finland offered an exceptionally interesting setting to study negotiation, as grocery retail trade in Finland is highly centralized. Especially for those interested understanding a centralized setting such as Finland’s retail field, the framework presented in this research might provide a valuable spectrum of essential negotiation elements. Learning is a lifelong process, but that path can be evened by tuning in on what others have learned during their own endeavors in similar situations. Seasoned negotiators have many stories to tell about negotiating that can be drawn upon and by doing so, we can avoid having to spend time learning the same insights twice. This research drew on narrative, case-research and interviewing to find out how seasoned negotiators in the field of Finnish retail experienced negotiation, what challenges negotiations pose and what tools can be used to overcome them

Personal branding on social media - The characteristics of strong personal brands in Finland

The purpose of the study is to define the characteristics of strong personal brands on social media in Finland. Personal branding as a phenomenon is no longer limited to celebrities and political leaders. The digital revolution and the change in online behavior have created the need for a deeper investigation of the characteristics of strong personal brands on social media. The work of different academics on personal branding are examined to gain a comprehensive understanding on this research topic that has gone through a revolution during the last decade. Early impression management theory is refined to include elements from more modern literature related to personal branding, brand identity management and social media to create a theoretical framework that simplifies the process of personal brand building on social media. The framework consisting of three phases clarifies the process of modern personal branding. The results of the study are presented in line with three research themes derived from the theoretical framework: the background of the brand, the brand identity management and the social media behavior and activities. Mixed methods are used in the research as means to broaden perception on the subject. The quantitative part of the study defines general characteristics concerning the most follower personal brands in Finland in three social media channels – Facebook, Instagram and Twitter. The other part of the research was conducted by single case study including two Finnish personal brands cases to provide a deeper understanding of personal branding practices of strong social media personal brands. The results of the study show that the most used social media channels differ in terms of the personal brand characteristics and personal branding activities. Due to the characteristics of the channels also the post activities of the personal brands differ quite significantly. It can be also inferred that there is a difference between brands with an existing offline awareness and the brands with no awareness before joining the social media. In order to reduce the gap between the ideal brand image and the current image, the brand should have a clear vision as well as a good understanding of the target group and the value it creates for its target audience. The brand identity needs to be managed by communicating with the target audience authentically in the right channels, with relevant content. The dedication, the target group’s behavior and the ability to create valuable and relevant content determines the right tactics for social media personal branding.