Enhancing the efficiency of freight transport by using simulation

The role of transport in the economy is twofold. As a sector of economic activity it contributes to a share of national income. On the other hand, improvements in transport infrastructure create room for accelerated economic growth. As a means to support railways as a safe and environmentally friendly transportation mode, the EU legislation has required the opening of domestic railway freight for competition from beginning of year 2007. The importance of railways as a mode of transport has been great in Finland, as a larger share of freight has been carried on rails than in Europe on average. In this thesis it is claimed that the efficiency of goods transport can be enhanced by service specific investments. Furthermore, it is stressed that simulation can and should be used to evaluate the cost-efficiency of transport systems on operational level, as well as to assess transportation infrastructure investments. In all the studied cases notable efficiency improvements were found. For example in distribution, home delivery of groceries can be almost twice as cost efficient as the current practice of visiting the store. The majority of the cases concentrated on railway freight. In timber transportation, the item with the largest annual transport volume in domestic railway freight in Finland, the transportation cost could be reduced most substantially. Also in international timber procurement, the utilization of railway wagons could be improved by combining complementary flows. The efficiency improvements also have positive environmental effects; a large part of road transit could be moved to rails annually. If impacts of freight transport are included in cost-benefit analysis of railway investments, up to 50 % increase in the net benefits of the evaluated alternatives can be experienced, avoiding a possible inbuilt bias in the assessment framework, and thus increasing the efficiency of national investments in transportation infrastructure. Transportation systems are a typical example of complex real world systems that cannot be analysed realistically by analytical methods, whereas simulation allows inclusion of dynamics and the level of detail required. Regarding simulation as a viable tool for assessing the efficiency of transportation systems finds support also in the international survey conducted for railway freight operators; operators use operations research methods widely for planning purposes, while simulation is applied only by the larger operators.

On Topological Solitons in The Faddeev-Skyrme Model and its Extensions

The topological solitons of two classical field theories, the Faddeev-Skyrme model and the Ginzburg-Landau model are studied numerically and analytically in this work. The aim is to gain information on the existence and properties of these topological solitons, their structure and behaviour under relaxation. First, the conditions and mechanisms leading to the possibility of topological solitons are explored from the field theoretical point of view. This leads one to consider continuous deformations of the solutions of the equations of motion. The results of algebraic topology necessary for the systematic treatment of such deformations are reviewed and methods of determining the homotopy classes of topological solitons are presented. The Faddeev-Skyrme and Ginzburg-Landau models are presented, some earlier results reviewed and the numerical methods used in this work are described. The topological solitons of the Faddeev-Skyrme model, Hopfions, are found to follow the same mechanisms of relaxation in three different domains with three different topological classifications. For two of the domains, the necessary but unusual topological classification is presented. Finite size topological solitons are not found in the Ginzburg-Landau model and a scaling argument is used to suggest that there are indeed none unless a certain modification to the model, due to R. S. Ward, is made. In that case, the Hopfions of the Faddeev-Skyrme model are seen to be present for some parameter values. A boundary in the parameter space separating the region where the Hopfions exist and the area where they do not exist is found and the behaviour of the Hopfion energy on this boundary is studied.

Haja-asutusalueiden sähkönjakelujärjestelmien kehittäminen – erityisesti 1000 V jakelujännitteen käyttömahdollisuudet

Yhteiskunnan riippuvuus sähköstä on lisääntynyt voimakkaasti viime vuosikymmenien aikana. Sähkönjakelussa esiintyneet lyhyet ja pitkät keskeytykset ovat osoittaneet yhteiskunnan haavoittuvuuden ja yhteiskunta kestää entistä vähemmän sähkönjakelussa tapahtuvia häiriöitä. Keskeytyksistä aiheutuneiden haittojen arvostus on kasvanut ja tämä on luonut taloudelliset perusteet sähkön laatua parantaville investoinneille. Haja-asutusalueiden keskijänniteverkon johdot on rakennettu avojohtoina ja siten ne ovat alttiita sääolosuhteista johtuville myrsky- ja lumikuormavaurioille. Ilmastomuutoksen ennustetaan lisäävän tuulisuutta ja siten ongelmat sähkönjakelussa mahdollisesti lisääntyvät. Taajamissa käytetään enemmän kaapeleita ja johtolähdöt ovat lyhyitä, joten myrskyistä aiheutuvia keskeytyksiä on vähemmän kuin haja-asutusalueella. Olemassa olevat jakeluverkot ovat käytössä vielä vuosikymmeniä, joten uuden tekniikan kehittämisen rinnalla on kehitettävä myös olemassa olevaa jakeluverkkoa ja sen ylläpitoa. Ylläpidon tavoitteena on käyttövarmuuden parantamisen lisäksi huolehtia siitä, että jakeluverkkoihin sitoutunut omaisuus säilyttää arvonsa mahdollisimman hyvin pitoajan loppuun saakka. Jakeluverkkoihin investoitiin paljon 1950–70-luvuilla. Tältä ajalta on yhä käytössä puupylväitä, joiden ikääntymisen takia korvausinvestointien tarve kasvaa. Hyvänä puolena tässä on että käyttövarmuuden parantamiseksi olemassa olevaa jakeluverkkoa ei tarvitse uusia ennenaikaisesti. Tutkimuksessa päähuomio on haja-asutusalueiden 20 kV keskijänniteverkon kehittämisessä, sillä yli 90 % asiakkaiden kokemista keskeytyksistä johtuu keskijänniteverkon vioista. Erityisesti johtorakenteisiin ja johtojen sijoittamiseen on kiinnitettävä huomiota. Käyttövarmuuden lisäksi jakeluverkkojen kehittämistä ohjaavia tekijöitä ovat taloudellisuus, ympäristön huomioiminen, viranomaisvalvonta sekä asiakkaiden ja omistajien odotukset. Haja-asutusalueilla taloudelliset haasteet ovat suuret vakituisen väestön vähenemisen ja mahdollisesti sähköntarpeen pienenemisen takia. Taloudellisuus korostuu ja riskit kasvavat, kun tuottojen määrä supistuu tarvittaviin jakeluverkon investointeihin ja ylläpitokustannuksiin verrattuna. Ristiriitaa aiheuttaa se, että asiakkaat odottavat sähkönjakelulta parempaa luotettavuutta, mutta paremmasta sähkönlaadusta ei olla valmiita maksamaan juurikaan nykyistä enempää. Jakeluverkkojen kehittämistä voi hidastaa myös viranomaisvalvonta, jos tuottoja ei voida lisätä investointien lisätarpeiden suhteessa. Tutkimuksessa on analysoitu yleisellä tasolla kaapeloinnin lisäämistä, korkeiden pylväiden käyttämistä, leveitä johtokatuja, edullisten ja yksinkertaisten sähköasemien rakentamista haja-asutusalueille ja automaatioasemien lisäämistä keskijänniteverkon solmupisteisiin. Erityisesti tutkimuksessa on analysoitu uutena tekniikkana 1000 V jännitteen käyttömahdollisuutta jakeluverkkojen kehittämisessä. Sähköjohtojen siirtäminen teiden varsiin parantaa käyttövarmuutta, vaikka johdot rakennetaan samalla tekniikalla kuin olemassa olevat johdot. Hajaasutusalueille rakennettavilla sähköasemilla pitkät syöttöjohdot voidaan jakaa pienemmiksi syöttöalueiksi, jolloin keskeytyksistä aiheutuvat haitat koskettavat kerrallaan pienempää asiakasmäärää. Samaan tulokseen päästään oikein sijoitetuilla ja toteutetuilla automaatioasemilla. Tutkimuksen mukaan lupaavaksi tekniikaksi jakeluverkkojen kehittämisessä on osoittautumassa 1000 V jänniteportaan ottaminen 400 V pienjännitteen lisäksi. 1000 V verkoilla voidaan korvata häiriöherkkiä 20 kV keskijänniteverkon lyhyitä, alle viiden kilometrin pituisia haarajohtoja ja haarajohtojen jatkeita, missä siirrettävät tehot ovat pieniä. Uudessa jakelujärjestelmässä sähkö tuodaan 1000 V jännitteellä lähelle asiakasta, jossa jännite muunnetaan normaaliksi asiakkaille soveltuvaksi 400/230 V jännitteeksi. Edullisuus perustuu siihen, että rakentamisessa käytetään samoja pienjännitejohtoja kuin asiakkaille menevässä 400 V pienjänniteverkossa. 1000 V jakelutekniikassa sekä investointikustannukset että ylläpitokustannukset ovat pienemmät kuin perinteisessä 20 kV ilmajohtotekniikassa. 1000 V johdot säästävät maisemaa, sillä ne eivät tarvitse leveää johtokatua kuten 20 kV keskijännitejohdot. 1000 V verkkojen käyttö soveltuukin erityisesti vapaa-ajanasuntojen sähköistykseen herkissä ranta- ja järvimaisemissa. 1000 V verkot mahdollistavat kaapeliauraamisen lisäämisen ja näin voidaan vähentää ympäristöä haittaavien kyllästettyjen pylväiden käyttöä. 1000 V jakeluverkkojen osalta tutkimustyön tuloksia on sovellettu suomalaisessa Suur-Savon Sähkö Oy:ssä. Käytännön kokemuksia 1000 V jakelujärjestelmästä on useista kymmenistä kohteista. Tutkimustulokset osoittavat, ettei keskijänniteverkon maakaapelointi hajaasutusalueilla ole taloudellisesti kannattavaa nykyisillä keskeytyksistä aiheutuvilla haitta-arvoilla, mutta jos keskeytyskustannusten arvostus kasvaa, tulee kaapelointi kannattavaksi monissa paikoissa. Myös myrskyisyyden ja myrskyistä aiheutuvien jakelukeskeytysten lisääntyminen tekisi kaapeloinnista kannattavan. Tulevaisuudessa jakeluverkkojen rakentaminen on entistä monimuotoisempi tehtävä, jossa taloudellisuuden ja käyttövarmuuden lisäksi on huomioitava asiakkaat, omistajat, viranomaiset ja ympäristö. Tutkimusta jakelutekniikan kehittämiseksi tarvitaan edelleen. Tulevaisuuden osalta haja-asutusalueiden jakeluverkkojen kehittämiseen liittyy paljon epävarmuuksia. Hajautetun kiinteistökohtaisen sähköntuotannon lisääntyminen voi tehdä jakeluverkoista nykyistä tarpeettomampia, mutta esimerkiksi liikenteen sähköistyminen voi kasvattaa jakeluverkkojen merkitystä. Tästä syystä jakeluverkkojen rakentamisessa tarvitaan joustavuutta, jotta tarvittaessa voidaan helposti sopeutua erilaisiin kehityssuuntiin.

Winner-Loser Performance and Macroeconomic Effects during three last Economic Crises in Finnish Stock Market

The main purpose of this thesis is to investigate winner-loser performance when financial markets are facing crisis. This is examined through the idea that does the prior loser portfolios outperform the prior winner portfolios during the three major crises: The depression of the 1990s, the IT-Bubble and the Subprime -crisis. Firstly, the winner and loser portfolios superiority is counted by using the cumulative excess returns from the examination period. The portfolios were formed by counting the excess returns and locating them in to the order of superiority. The excess returns are counted by using one year pre-data before the actual examination period. The results of this part did not support the results of De Bondt & Thaler’s (1985) paper. Secondly, it is investigated how the Finnish and the US macroeconomic factors are seen to be affecting the stock market valuation in Finnish Stock Markets during economic crises. This is done to explain better the changes in the successes of the winner-loser performance. The crises included different amount of selected macro factors. Two latest crises involved as well few selected US macro factors. Exclusively the IT-Bubble -crisis had the most statistically significant results with the US factors. Two other crises did not receive statistically significant results. An extra research was produced to study do the US macro factors impact more significantly on Finnish stock exchange after lags. The selected lags were three, six, nine and twelve months. Three and six month lagged US macro factors during the IT-Bubble -crisis improved the results. The extra research did not improve the results of the Subprime -crisis.

RTOS Framework for Real-Time Control System

This thesis is done as a complementary part for the active magnet bearing (AMB) control software development project in Lappeenranta University of Technology. The main focus of the thesis is to examine an idea of a real-time operating system (RTOS) framework that operates in a dedicated digital signal processor (DSP) environment. General use real-time operating systems do not necessarily provide sufficient platform for periodic control algorithm utilisation. In addition, application program interfaces found in real-time operating systems are commonly non-existent or provided as chip-support libraries, thus hindering platform independent software development. Hence, two divergent real-time operating systems and additional periodic extension software with the framework design are examined to find solutions for the research problems. The research is discharged by; tracing the selected real-time operating system, formulating requirements for the system, and designing the real-time operating system framework (OSFW). The OSFW is formed by programming the framework and conjoining the outcome with the RTOS and the periodic extension. The system is tested and functionality of the software is evaluated in theoretical context of the Rate Monotonic Scheduling (RMS) theory. The performance of the OSFW and substance of the approach are discussed in contrast to the research theme. The findings of the thesis demonstrates that the forged real-time operating system framework is a viable groundwork solution for periodic control applications.

Suomen seuraavien ydinvoimalaitosehdokkaiden tyyppivertailu

Tässä kandidaatintyössä on esitelty ja vertailtu Suomeen ehdolla olevat ydinvoimalaitostyypit pääasiassa voimayhtiöiden periaatepäätöshakemusten pohjalta.

Water circulations for effective bleaching of high-brightness mechanical pulps

The amount of water available is usually restricted, which leads to a situation where a complete understanding of the process, including water circulations and the influence of water components, is essential. The main aim of this thesis was to clarify the possibilities for the efficient use of residual peroxide by means of water circulation rearrangements. Rearranging water circulations and the reduction of water usage may cause new problems, such as metal induced peroxide decomposition that needs to be addressed. This thesis introduces theoretical methods of water circulations to combine two variables; effective utilization of residual peroxide and avoiding manganese in the alkaline peroxide bleaching stage. Results are mainly based on laboratory and mill site experiments concerning the utilization of residual peroxide. A simulation model (BALAS) was used to evaluate the manganese contents and residual peroxide doses. It was shown that with optimum recirculation of residual peroxide the brightness can be improved or chemical costs can be decreased. From the scientific perspective, it was also very important to discover that recycled peroxide was more effective pre-bleaching agent compared to fresh peroxide. This can be due to the organic acids i.e. per acetic acid in wash press filtrate that have been formed in alkaline bleaching stage. Even short retention time was adequate and the activation of residual peroxide using sodium hydroxide was not necessary. There are several possibilities for using residual peroxide in practice regarding bleaching. A typical modern mechanical pulping process line consist of defibering, screening, a disc filter, a bleach press, high consistency (HC) peroxide bleaching and a wash press. Furthermore there usually is not a particular medium consistency (MC) pre-bleaching stage that includes additional thickening equipment. The most advisable way to utilize residual peroxide in this kind of process is to recycle the wash press filtrate to the dilution of disc filter pulp (low MC pre-bleaching stage). An arrangement such as this would be beneficial in terms of the reduced convection of manganese to the alkaline bleaching stage. Manganese originates from wood material and will be removed to the water phase already in the early stages of the process. Recycling residual peroxide prior to the disc filter is not recommended because of low consistencies. Regarding water circulations, the novel point of view is that, it would be beneficial to divide water circulations into two sections and the critical location for the division is the disc filter. Both of these two sections have their own priority. Section one before the disc filter: manganese removal. Section two after the disc filter: brightening of pulp. This division can be carried out if the disc filter pulp is diluted only by wash press filtrate before the MC storage tower. The situation is even better if there is an additional press after the disc filter, which will improve the consistency of the pulp. This has a significant effect on the peroxide concentration in the MC pre-bleaching stage. In terms of manganese content, it is essential to avoid the use of disc filter filtrate in the bleach press and wash press showers. An additional cut-off press would also be beneficial for manganese removal. As a combination of higher initial brightness and lower manganese content, the typical brightness increase varies between approximately 0.5 and 1% ISO units after the alkaline peroxide bleaching stage. This improvement does not seem to be remarkable, but as it is generally known, the final brightness unit is the most expensive and difficult to achieve. The estimation of cost savings is not unambiguous. For example in GW/TMP mill case 0.6% ISO units higher final brightness gave 10% savings in the costs of bleaching chemicals. With an hypothetical 200 000 ton annual production, this means that the mill could save in the costs of bleaching chemicals more than 400 000 euros per year. In general, it can be said that there were no differences between the behavior of different types of processes (GW, PGW, TMP and BCTMP). The enhancement of recycling gave a similar response in all cases. However, we have to remember that the utilization of residual peroxide in older mills depends a great deal on the process equipment, the amount of water available and existing pipeline connections. In summary, it can be said that processes are individual and the same solutions cannot be applied to all cases.

Change of Electricity Distribution Industry: Drivers and Opening Business Opportunities

As a result of the recent regulatory amendments and other development trends in the electricity distribution business, the sector is currently witnessing radical restructuring that will eventually impact the business logics of the sector. This report represents upcoming changes in the electricity distribution industry and concentrates on the factors that are expected to be the most fundamental ones. Electricity network companies nowadays struggle with legislative and regulatory requirements that focus on both the operational efficiency and the reliability of electricity distribution networks. The forces that have an impact on the distribution network companies can be put into three main categories that define the transformation at a general level. Those are: (1) a requirement for a more functional marketplace for energy, (2) environmental aspects (combating climate change etc.), and (3) a strongly emphasized requirement for the security of energy supply. The first point arises from the legislators’ attempt to increase competition in electricity retail markets, the second one concerns both environmental protection and human safety issues, and the third one indicates societies’ reduced willingness to accept interruptions in electricity supply. In the future, regulation of electricity distribution business may lower the threshold for building more weather-resistant networks, which in turn means increased underground cabling. This development pattern is reinforced by tightening safety and environmental regulations that ultimately make the overhead lines expensive to build and maintain. The changes will require new approaches particularly in network planning, construction, and maintenance. The concept for planning, constructing, and maintaining cable networks is necessary because the interdependencies between network operations are strong, in other words, the nature of the operation requires a linkage to other operations.

Theoretical background for market emergence framework : Case: Electricity Distribution Industry

Both the competitive environment and the internal structure of an industrial organization are typically included in the processes which describe the strategic management processes of the firm, but less attention has been paid to the interdependence between these views. Therefore, this research focuses on explaining the particular conditions of an industry change, which lead managers to realign the firm in respect of its environment for generating competitive advantage. The research question that directs the development of the theoretical framework is: Why do firms outsource some of their functions? The three general stages of the analysis are related to the following research topics: (i) understanding forces that shape the industry, (ii) estimating the impacts of transforming customer preferences, rivalry, and changing capability bases on the relevance of existing assets and activities, and emergence of new business models, and (iii) developing optional structures for future value chains and understanding general boundaries for market emergence. The defined research setting contributes to the managerial research questions “Why do firms reorganize their value chains?”, “Why and how are decisions made?” Combining Transaction Cost Economics (TCE) and Resource-Based View (RBV) within an integrated framework makes it possible to evaluate the two dimensions of a company’s resources, namely the strategic value and transferability. The final decision of restructuring will be made based on an analysis of the actual business potential of the outsourcing, where benefits and risks are evaluated. The firm focuses on the risk of opportunism, hold-up problems, pricing, and opportunities to reach a complete contract, and finally on the direct benefits and risks for financial performance. The supplier analyzes the business potential of an activity outside the specific customer, the amount of customer-specific investments, the service provider’s competitive position, abilities to revenue gains in generic segments, and long-term dependence on the customer.

Pff. Concerto III

Soitinnus: piano, orkesteri.

Kamarisinfonia

Soitinnus: orkesteri.

Pff. Concerto 2

Soitinnus: piano, orkesteri.

Henkilöstöresurssien hallintatyökalun vaatimukset asiantuntijaorganisaatiossa

Yrityksen organisaatiomallin pitää palvella tehokasta toimintaa. Tällä hetkellä tässä yrityksessä resurssipooleihin perustuva organisaatio on katsottu sopivaksi. Sen toivotaan mahdollistavan henkilöstöresurssien tehokas hyödyntäminen. Organisaation muutos vaatii myös toimintatapojen ja joissain tapauksissa tietojärjestelmien muutosta. Tässä tapauksessa siirtyminen uudenlaiseen organisaatioon loi tarpeen uudelle resurssien varaus- ja etsintätoiminnolle ja sitä tukeville tietovarastoille. Vaatimusmäärityksen tuloksena voidaan todeta, että nykyinen ERP-ohjelmisto ei ole paras mahdollinen yrityksen käyttöön, vaikka senkin kanssa yritys kyllä tulee toimeen. Tärkeimpinä vaatimuksina hyvälle hallintasovellukselle voidaan pitää mahdollisuutta seurata työntekijöiden osaamisen ja tietämyksen kehitystä sekä arvioida niiden tasoa, mahdollisuutta varata niin henkilöitä kuin osaamisia ja tehokasta ja muunneltavaa mekanismia henkilöiden valintaan projekteihin. Nykyisessä toteutuksessa henkilöstön osaamisten käsittely on hiukan rajoittunutta eikä mitään historiatietoja tallenneta tai käytetä hyödyksi missään vaiheessa. Myös resurssien haku projekteihin olisi mahdollista toteuttaa paremmin. Hakuihin pitäisi saada lisää hakuehtoja ja mahdollistaa yleisluontoisemmat ehdot yksityiskohtien sijaan, vaikka tiedot olisivatkin tarkemmalla tasolla. Näistä syistä uuden työkalun rakentamista henkilöstöresurssien paremman hyödyntämisen takaamiseksi voidaan pitää perusteltuna.

On the Application of Beam on Elastic Foundation Theory to the Analysis of Stiffened Plate Strips

The main objective of this thesis is to show that plate strips subjected to transverse line loads can be analysed by using the beam on elastic foundation (BEF) approach. It is shown that the elastic behaviour of both the centre line section of a semi infinite plate supported along two edges, and the free edge of a cantilever plate strip can be accurately predicted by calculations based on the two parameter BEF theory. The transverse bending stiffness of the plate strip forms the foundation. The foundation modulus is shown, mathematically and physically, to be the zero order term of the fourth order differential equation governing the behaviour of BEF, whereas the torsion rigidity of the plate acts like pre tension in the second order term. Direct equivalence is obtained for harmonic line loading by comparing the differential equations of Levy's method (a simply supported plate) with the BEF method. By equating the second and zero order terms of the semi infinite BEF model for each harmonic component, two parameters are obtained for a simply supported plate of width B: the characteristic length, 1/ λ, and the normalized sum, n, being the effect of axial loading and stiffening resulting from the torsion stiffness, nlin. This procedure gives the following result for the first mode when a uniaxial stress field was assumed (ν = 0): 1/λ = √2B/π and nlin = 1. For constant line loading, which is the superimposition of harmonic components, slightly differing foundation parameters are obtained when the maximum deflection and bending moment values of the theoretical plate, with v = 0, and BEF analysis solutions are equated: 1 /λ= 1.47B/π and nlin. = 0.59 for a simply supported plate; and 1/λ = 0.99B/π and nlin = 0.25 for a fixed plate. The BEF parameters of the plate strip with a free edge are determined based solely on finite element analysis (FEA) results: 1/λ = 1.29B/π and nlin. = 0.65, where B is the double width of the cantilever plate strip. The stress biaxial, v > 0, is shown not to affect the values of the BEF parameters significantly the result of the geometric nonlinearity caused by in plane, axial and biaxial loading is studied theoretically by comparing the differential equations of Levy's method with the BEF approach. The BEF model is generalised to take into account the elastic rotation stiffness of the longitudinal edges. Finally, formulae are presented that take into account the effect of Poisson's ratio, and geometric non linearity, on bending behaviour resulting from axial and transverse inplane loading. It is also shown that the BEF parameters of the semi infinite model are valid for linear elastic analysis of a plate strip of finite length. The BEF model was verified by applying it to the analysis of bending stresses caused by misalignments in a laboratory test panel. In summary, it can be concluded that the advantages of the BEF theory are that it is a simple tool, and that it is accurate enough for specific stress analysis of semi infinite and finite plate bending problems.