Pre-skriptio metafysiikalle : apteekkiin ja takaisin

Kirjallisuusarvostelu

Socially Competent Leadership - predictors, impacts and skilling in engineering

Earlier management studies have found a relationship between managerial qualities and subordinate impacts, but the effect of managers‘ social competence on leader perceptions has not been solidly established. To fill the related research gap, the present work embarks on a quantitative empirical effort to identify predictors of successful leadership. In particular, this study investigates relationships between perceived leader behavior and three selfreport instruments used to measure managerial capability: 1) the WOPI Work Personality Inventory, 2) Raven‘s general intelligence scale, and 3) the Emotive Communication Scale (ECS). This work complements previous research by resorting to both self-reports and other-reports: the results acquired from the managerial sample are compared to subordinate perceptions as measured through the ECS other-report and the WOPI360 multi-source appraisal. The quantitative research is comprised of a sample of 8o superiors and 354 subordinates operating in eight Finnish organizations. The strongest predictive value emerged from the ECS self- and other-reports and certain personality dimensions. In contrast, supervisors‘ logical intelligence did not correlate with leadership perceived as socially competent by subordinates. 16 of the superiors rated as most socially competent by their subordinates were selected for case analysis. Their qualitative narratives evidence the role of life history and post-traumatic growth in developing managerial skills. The results contribute to leadership theory in four ways. First, the ECS self-report devised for this research offers a reliable scale for predicting socially competent leader ability. Second, the work identifies dimensions of personality and emotive skills that can be considered predictors of managerial ability and benefited from in leader recruitment and career planning. Third, the Emotive Communication Model delineated on the basis of the empirical data allows for a systematic design and planning of communication and leadership education. Fourth, this workfurthers understanding of personal growth strategies and the role of life history in leader development and training. Finally, this research advances educational leadership by conceptualizing and operationalizing effective managerial communications. The Emotive Communication Model devised directs the pedagogic attention in engineering to assertion, emotional availability and inspiration skills. The proposed methodology addresses classroom management strategies drawing from problem-based learning, student empowerment, collaborative learning, and so-called socially competent teachership founded on teacher immediacy and perceived caring, all constituting strategies moving away from student compliance and teacher modelling. The ultimate educational objective embraces the development of individual engineers and organizational leaders that not only possess traditional analytical and technical expertise and substantive knowledge but are intelligent also creatively, practically, and socially.

Cognitive Development of Very Low Birth Weight Children from Infancy to Pre-school Age

The survival of preterm born infants has increased but the prevalence of long-term morbidities has still remained high. Preterm born children are at an increased risk for various developmental impairments including both severe neurological deficits as well as deficits in cognitive development. According to the literature the developmental outcome perspective differs between countries, centers, and eras. Definitions of preterm infant vary between studies, and the follow-up has been carried out with diverse methods making the comparison less reliable. It is essential to offer parents upto-date information about the outcome of preterm infants born in the same area. A centralized follow-up of children at risk makes it possible to monitor the consequences of changes in the treatment practices of hospitals on developmental outcome. This thesis is part of a larger regional, prospective multidisciplinary follow-up project entitled “Development and Functioning of Very Low Birth Weight Infants from Infancy to School Age” (PIeniPAinoisten RIskilasten käyttäytyminen ja toimintakyky imeväisiästä kouluikään, PIPARI). The thesis consists of four original studies that present data of very low birth weight (VLBW) infants born between 2001 and 2006, who are followed up from the neonatal period until the age of five years. The main outcome measure was cognitive development and secondary outcomes were significant neurological deficits (cerebral palsy, CP, deafness, and blindness). In Study I, the early crying and fussing behavior of preterm infants was studied using parental diaries, and the relation of crying behavior and cognitive and motor development at the age of two years was assessed. In Study II, the developmental outcome (cognitive, CP, deafness, and blindness) at the age of two years was studied in relation to demographic, antenatal, neonatal, and brain imaging data. Development was studied in relationship to a full-term born control group born in the same hospital. In Study III, the stability of cognitive development was studied in VLBW and full-term groups by comparing the outcomes at the ages of two and five years. Finally, in Study IV the precursors of reading skills (phonological processing, rapid automatized naming, and letter knowledge) were assessed for VLBW and full-term children at the age of five years. Pre-reading skills were studied in relation to demographic, antenatal, neonatal, and brain imaging data. The main findings of the thesis were that VLBW infants who fussed or cried more in the infancy were not at greater risk for problems in their cognitive development. However, crying was associated with poorer motor development. The developmental outcome of the present population was better that has been reported earlier and this improvement covered also cognitive development. However, the difference to fullterm born peers was still significant. Major brain pathology and intestinal perforation were independent significant risk factors for adverse outcome, also when several individual risk factors were controlled for. Cognitive development at the age of two years was strongly related with development at the age of five years, stressing the importance of the early assessment, and the possibility for early interventions. Finally, VLBW children had poorer pre-reading skills compared with their full-term born peers, but the IQ was an important mediator even when children with mental retardation were excluded from the analysis. The findings suggest that counseling parents about the developmental perspectives of their preterm infant should be based on data covering the same birth hospital. Neonatal brain imaging data and neonatal morbidity are important predictors for developmental outcome. The findings of the present study stress the importance of both short-term (two years) and long-term (five years) follow-ups for the individual, and for improving the quality of care.

A Case Study of Agile Software Engineering Methods and Practices in the MeeGo Harmattan Open Source and Product Context

The aim of this master’s thesis is to study how Agile method (Scrum) and open source software are utilized to produce software for a flagship product in a complex production environment. The empirical case and the used artefacts are taken from the Nokia MeeGo N9 product program, and from the related software program, called as the Harmattan. The single research case is analysed by using a qualitative method. The Grounded Theory principles are utilized, first, to find out all the related concepts from artefacts. Second, these concepts are analysed, and finally categorized to a core category and six supported categories. The result is formulated as the operation of software practices conceivable in circumstances, where the accountable software development teams and related context accepts a open source software nature as a part of business vision and the whole organization supports the Agile methods.

Self assessment report for international accreditation - Bachelor's and Master's degree programmes in Mechanical Engineering

Itsearviointiraportissa kuvataan Lappeenrannan teknillisen yliopiston konetekniikan kandidaatin ja diplomi-insinöörin tutkinto-ohjelmat opetussuunnitelman 2011-2012 mukaisesti. Itsearviointiraportti on tuotettu saksalaisen ASIIN-akkreditointiorganisaation raportointimallin mukaisesti.

Bioactive Glass in Lumbar Spondylodesis. A Pre-Clinical and Clinical Study

Bioactive glasses (BGs) form a group of synthetic, surface-active, composition-dependent, silica-based biomaterials with osteoconductive, osteopromotive, and even angiogenic, as well as antibacterial, properties. A national interdisciplinary research group, within the Combio Technology Program (2003–2007), developed a porous load-bearing composite for surgical applications made of BG 1–98 and polymer fibers. The pre-clinical part of this thesis focused on the in vitro and in vivo testing of the composite materials in a rabbit femur and spinal posterolateral fusion model. The femur model failed to demonstrate the previously seen positive effect of BG 1–98 on osteogenesis, probably due to the changed resorption properties of BG in the form of fibers. The spine study was terminated early due to adverse events. In vitro cultures showed the growth inhibition of human mesenchymal stems next to BG 1–98 fibers and radical pH changes. A prospective, long-term, follow-up study was conducted on BG–S53P4 and autogenous bone used as bone graft substitutes for instrumented posterolateral spondylodesis in the treatment of degenerative spondylolisthesis (n=17) and unstable burst fractures (n=10) during 1996–1998. The operative outcome was evaluated from X-rays and CT scans, and a clinical examination was also performed. On the BG side, a solid fusion was observed in the CT scans of 12 patients, and a partial fusion was found in 5 patients, the result being a total fusion rate in all fusion sites (n=41) 88% for levels L4/5 and L5/S1 in the spondylolisthesis group. In the spine fracture group, solid fusion was observed in five patients, and partial fusion was found in five resulting in a total fusion rate of 71% of all fusion sites (n=21). The pre-clinical results suggest that under certain conditions the physical form of BG can be more critical than its chemical composition when a clinical application is designed. The first long-term clinical results concerning the use of BG S53P4 as bone graft material in instrumented posterolateral spondylodesis seems to be a safe procedure, associated with a very low complication rate. BG S53P4 used as a stand-alone bone substitute cannot be regarded as being as efficient as AB in promoting solid fusion.

Detection of the Vulnerable Atherosclerotic Plaque. Pre-Clinical Evaluation of Novel PET Imaging Probes With Experimental Models

Atherosclerosis is a life-long vascular inflammatory disease and the leading cause of death in Finland and in other western societies. The development of atherosclerotic plaques is progressive and they form when lipids begin to accumulate in the vessel wall. This accumulation triggers the migration of inflammatory cells that is a hallmark of vascular inflammation. Often, this plaque will become unstable and form vulnerable plaque which may rupture causing thrombosis and in the worst case, causing myocardial infarction or stroke. Identification of these vulnerable plaques before they rupture could save lives. At present, in the clinic, there exists no appropriated, non-invasive method for their identification. The aim of this thesis was to evaluate novel positron emission tomography (PET) probes for the detection of vulnerable atherosclerotic plaques and to characterize, two mouse models of atherosclerosis. These studies were performed by using ex vivo and in vivo imaging modalities. The vulnerability of atherosclerotic plaques was evaluated as expression of active inflammatory cells, namely macrophages. Age and the duration of high-fat diet had a drastic impact on the development of atherosclerotic plaques in mice. In imaging of atherosclerosis, 6-month-old mice, kept on high-fat diet for 4 months, showed matured, metabolically active, atherosclerotic plaques. [18F]FDG and 68Ga were accumulated in the areas representative of vulnerable plaques. However, the slow clearance of 68Ga limits its use for the plaque imaging. The novel synthesized [68Ga]DOTA-RGD and [18F]EF5 tracers demonstrated efficient uptake in plaques as compared to the healthy vessel wall, but the pharmacokinetic properties of these tracers were not optimal in used models. In conclusion, these studies resulted in the identification of new strategies for the assessment of plaque stability and mouse models of atherosclerosis which could be used for plaque imaging. In the used probe panel, [18F]FDG was the best tracer for plaque imaging. However, further studies are warranted to clarify the applicability of [18F]EF5 and [68Ga]DOTA-RGD for imaging of atherosclerosis with other experimental models.

Software Development Process Modeling. Developers Perspective to Contemporary Modeling Techniques

Formal software development processes and well-defined development methodologies are nowadays seen as the definite way to produce high-quality software within time-limits and budgets. The variety of such high-level methodologies is huge ranging from rigorous process frameworks like CMMI and RUP to more lightweight agile methodologies. The need for managing this variety and the fact that practically every software development organization has its own unique set of development processes and methods have created a profession of software process engineers. Different kinds of informal and formal software process modeling languages are essential tools for process engineers. These are used to define processes in a way which allows easy management of processes, for example process dissemination, process tailoring and process enactment. The process modeling languages are usually used as a tool for process engineering where the main focus is on the processes themselves. This dissertation has a different emphasis. The dissertation analyses modern software development process modeling from the software developers’ point of view. The goal of the dissertation is to investigate whether the software process modeling and the software process models aid software developers in their day-to-day work and what are the main mechanisms for this. The focus of the work is on the Software Process Engineering Metamodel (SPEM) framework which is currently one of the most influential process modeling notations in software engineering. The research theme is elaborated through six scientific articles which represent the dissertation research done with process modeling during an approximately five year period. The research follows the classical engineering research discipline where the current situation is analyzed, a potentially better solution is developed and finally its implications are analyzed. The research applies a variety of different research techniques ranging from literature surveys to qualitative studies done amongst software practitioners. The key finding of the dissertation is that software process modeling notations and techniques are usually developed in process engineering terms. As a consequence the connection between the process models and actual development work is loose. In addition, the modeling standards like SPEM are partially incomplete when it comes to pragmatic process modeling needs, like light-weight modeling and combining pre-defined process components. This leads to a situation, where the full potential of process modeling techniques for aiding the daily development activities can not be achieved. Despite these difficulties the dissertation shows that it is possible to use modeling standards like SPEM to aid software developers in their work. The dissertation presents a light-weight modeling technique, which software development teams can use to quickly analyze their work practices in a more objective manner. The dissertation also shows how process modeling can be used to more easily compare different software development situations and to analyze their differences in a systematic way. Models also help to share this knowledge with others. A qualitative study done amongst Finnish software practitioners verifies the conclusions of other studies in the dissertation. Although processes and development methodologies are seen as an essential part of software development, the process modeling techniques are rarely used during the daily development work. However, the potential of these techniques intrigues the practitioners. As a conclusion the dissertation shows that process modeling techniques, most commonly used as tools for process engineers, can also be used as tools for organizing the daily software development work. This work presents theoretical solutions for bringing the process modeling closer to the ground-level software development activities. These theories are proven feasible by presenting several case studies where the modeling techniques are used e.g. to find differences in the work methods of the members of a software team and to share the process knowledge to a wider audience.

A bridge between engineering and language learning : automation and German in an online course

Artikkeli luettavissa osassa: Part 2. - ISBN 9789522163172(PDF). - Liitteenä työpaperi

Self-Assessment Report for International Accreditation - Chemical Engineering

Kemiantekniikan kandidaatin ja diplomi-insinöörin tutkinto-ohjelmien itsearviointiraportissa käsitellään tutkinto-ohjelmien osaamistavoitteita ja niiden saavuttamista. Raportissa käydään läpi myös käytössä olevat resurssit sekä tutkinto-ohjelmiin liittyviä tunnuslukuja. Itsearviointi on toteutettu kansainvälisen akkreditointijärjestön kriteerien mukaisesti (ASIIN ja EUR-ACE).

The impact of a new partnership outsourcing arrangement: a routine-based case study in detail engineering

This thesis investigated the contemporary phenomenon of detail engineering outsourcing. The case organization had pursued a new outsourcing approach with a trusted partner. The goal of this empirical study was to examine the impact of the consequential partnership outsourcing arrangement. Particularly, the beneficence of the arrangement was evaluated based on the underlying organizational routine and the long-term economic implications of its performance outcome. The case study was needed, as the unit will likely have to rely on such distance outsourcing arrangements more and more in the future, and understanding on the impact of such operations is needed. The main findings revealed that the new outsourcing arrangement is not currently a very attractive strategic option for organizing production. The benefits which stem from the emerged, unique engineering project routine are not significant enough to make the arrangement an advantageous one, especially since increasing partnering costs are being met. This conclusion was drawn via the extended transaction cost view. Benchmarking was done in reliance to an old arrangement from which the new pursuit was a departure from. The case study then enlightened the engineering unit on the impact of its strategic maneuver by combining the routines-theory framework with contemporary methods of governance structure evaluation. Through this, it was shown that greater efforts are needed to make the new outsourcing approach a more beneficial one. However, the studied arrangement was seen to inhold potential for better results. The findings can be used to capitalize on this.

Formal development and quantitative verification of dependable systems

-