Bus bar aeolian vibration field tests

Large amplitude bus bar aeolian vibration may lead to post insulator damage. Different damping applications are used to decrease the risk of large amplitude aeolian vibration. In this paper the post insulator load caused by the bus bar aeolian vibration and the effect of damping methods are evaluated. The effects of three types of bus bar connectors and three types of primary structures are studied. Two actual damping devices, damping cable and their combinations are studied. The post insulator loads are studied with strain gage based custom made force sensors installed on the both ends of the post insulator and with the displacement sensor installed on the midpoint of the bus bar. The post insulator loads are calculated from the strain values and the damping properties are determined from the displacement history. The bus bar is deflected with a hanging weight. The weight is released and the bus bar is left to free damped vibration. Both actual bus bar vibration dampers RIBE and SBI were very effective against the aeolian vibration. Combining vibration damper with damping cable will increase the damping ratio but it may be unnecessary considering the extra effort. Bus bar connector type or primary structure have no effect on the vertical load. The bending moment at the post insulator with double sided bus bar connector is significantly higher than at the post insulator with single sided bus bar connector. No reliable conclusions about bus bar connector type effect can be done, but the roller bearing type or central bearing type connector may reduce the bending moment. The RHS steel frame as primary structure may increase the bending moment peak values since it is the least rigid primary structure type and it may start to vibrate as a response to the awakening force of the vibrating bus bar.

Electric field control of magnetism in hydrid ferromagnetic / ferroelectric materials

Väisälän palkinnon 2012 saaja.

Identification of research trends in the field of separation processes. Application of epidemiological model, citation analysis, text mining, and technical analysis of the financial markets

Choice of industrial development options and the relevant allocation of the research funds become more and more difficult because of the increasing R&D costs and pressure for shorter development period. Forecast of the research progress is based on the analysis of the publications activity in the field of interest as well as on the dynamics of its change. Moreover, allocation of funds is hindered by exponential growth in the number of publications and patents. Thematic clusters become more and more difficult to identify, and their evolution hard to follow. The existing approaches of research field structuring and identification of its development are very limited. They do not identify the thematic clusters with adequate precision while the identified trends are often ambiguous. Therefore, there is a clear need to develop methods and tools, which are able to identify developing fields of research. The main objective of this Thesis is to develop tools and methods helping in the identification of the promising research topics in the field of separation processes. Two structuring methods as well as three approaches for identification of the development trends have been proposed. The proposed methods have been applied to the analysis of the research on distillation and filtration. The results show that the developed methods are universal and could be used to study of the various fields of research. The identified thematic clusters and the forecasted trends of their development have been confirmed in almost all tested cases. It proves the universality of the proposed methods. The results allow for identification of the fast-growing scientific fields as well as the topics characterized by stagnant or diminishing research activity.

Scalable algorithms for height field illumination

Global illumination algorithms are at the center of realistic image synthesis and account for non-trivial light transport and occlusion within scenes, such as indirect illumination, ambient occlusion, and environment lighting. Their computationally most difficult part is determining light source visibility at each visible scene point. Height fields, on the other hand, constitute an important special case of geometry and are mainly used to describe certain types of objects such as terrains and to map detailed geometry onto object surfaces. The geometry of an entire scene can also be approximated by treating the distance values of its camera projection as a screen-space height field. In order to shadow height fields from environment lights a horizon map is usually used to occlude incident light. We reduce the per-receiver time complexity of generating the horizon map on N N height fields from O(N) of the previous work to O(1) by using an algorithm that incrementally traverses the height field and reuses the information already gathered along the path of traversal. We also propose an accurate method to integrate the incident light within the limits given by the horizon map. Indirect illumination in height fields requires information about which other points are visible to each height field point. We present an algorithm to determine this intervisibility in a time complexity that matches the space complexity of the produced visibility information, which is in contrast to previous methods which scale in the height field size. As a result the amount of computation is reduced by two orders of magnitude in common use cases. Screen-space ambient obscurance methods approximate ambient obscurance from the depth bu er geometry and have been widely adopted by contemporary real-time applications. They work by sampling the screen-space geometry around each receiver point but have been previously limited to near- field effects because sampling a large radius quickly exceeds the render time budget. We present an algorithm that reduces the quadratic per-pixel complexity of previous methods to a linear complexity by line sweeping over the depth bu er and maintaining an internal representation of the processed geometry from which occluders can be efficiently queried. Another algorithm is presented to determine ambient obscurance from the entire depth bu er at each screen pixel. The algorithm scans the depth bu er in a quick pre-pass and locates important features in it, which are then used to evaluate the ambient obscurance integral accurately. We also propose an evaluation of the integral such that results within a few percent of the ray traced screen-space reference are obtained at real-time render times.

Yritysosto-ohjelmien kyvykkyydet ja niiden kehittäminen: Field-tutkimus

Yritysten tavassa suorittaa yritysostoja on havaittu selkeä muutos. Useassa yritysostoja koskevassa tutkimuksessa on havaittu, että yrityksillä on tapana suorittaa useita peräkkäisiä tai jopa rinnakkaisia yritysostoja, jotka tukevat yrityksen pitkän aikavälin kasvustrategiaa. Tätä ilmiötä kutsutaan yritysosto-ohjelmaksi. Yritysosto-ohjelma on yksittäisten yritysostojen sarja, jonka avulla ohjelmaa toteuttava yritys pyrkii saavuttamaan tietyn liiketoimintapäämäärän tai halutun markkina-aseman. Yritysosto-ohjelmia koskevissa tutkimuksissa on viime aikoina siirrytty tutkimaan syitä, jotka aiheuttavat eroja yritysten toteuttamien yritysostojen suorituskyvyssä. Yhtenä potentiaalisena selityksenä tälle ilmiölle on nostettu erot yritysten yritysosto-ohjelmakyvykkyyksissä. Yritysostoohjelmakyvykkyyksiksi luetaan kaikki yrityksen tiedot, taidot, järjestelmät, menettelytavat ja muu yrityksen osaaminen, jotka tehostavat yrityksen osto-ohjelmien toteuttamista. Tutkielman tarkoituksena on selvittää, mitkä ovat olennaisimmat yritysosto-ohjelmakyvykkyydet ja miten näitä kyvykkyyksiä kehitetään. Tutkimusongelman ratkaisemiseksi aiheen teoreettisen tarkastelun lisäksi toteutettiin field-tutkimus viidessä lukuisia yritysostoja toteuttaneessa yrityksessä. Teoreettisessa tarkastelussa pyrittiin ensin kuvaamaan osto-ohjelmailmiötä ja aikaisemmissa tutkimuksissa havaittuja osto-ohjelmakyvykkyyksiä. Kyvykkyyksien kehittymisen teoreettisen tarkastelun pohjana hyödynnettiin aikaisempaa kirjallisuutta dynaamisista kyvykkyyksistä ja niiden kehityksestä sekä kirjallisuutta ja aikaisempia tutkimuksia organisatorisesta oppimisesta ja sen vaikutuksesta dynaamisten kyvykkyyksien kehitykseen. Sekä tutkimuksessa esitetty teoria että empiirinen aineisto osoittivat, että on olemassa yritysostoohjelmakyvykkyyksiä, jotka osaltaan selittävät yritysostojen suorituskyvyn eroja eri yritysostajien välillä. Olennaisimpina osto-ohjelmakyvykkyyksinä tutkielmassa nousivat esiin: (1) kyky luoda toimiva yritysostostrategia ja valita menestyvä markkina-alue, (2) kyky valita yritysostoohjelmastrategiaa tukevia ja yritykseen sopivia ostokohteita, (3) kyky strukturoida yritysostoprosessi, (4) kyky hallita integraatioprosesseja, sekä (5) kyky soveltaa yritysostokokemuksia. Haastateltavissa yrityksissä oli kyvykkyyksien kehittämisessä selkeästi havaittavissa yksisilmukkainen ja kaksisilmukkainen oppiminen, joka tuki Vossin (2008) kehittämää viitekehystä osto-ohjelmakyvykkyyksien kehittymissyklistä. Teoreettisten ja empiiristen havaintojen perusteella tutkielmassa hahmoteltiin organisatorisen oppimisen ja kyvykkyyksien kehittymisen suhdetta visualisoiva yritysosto-ohjelmakyvykkyyksien kehittämisen viitekehys.

Strong magnetic field pulse generator

High magnetic fields and extremely low temperatures are essential in the study of new semiconductor materials for example in the field of spintronics. Typical phenomenons that arise in such conditions are: Hall Effect, Anomalous Hall effect and Shubnikov de-Haas effect. In this thesis a device capable for such conditions was described. A strong magnetic field pulse generator situated in the laboratory of physics and the Lappeenranta University of Technology was studied. The device is introduced in three parts. First one is the pulsed field magnetic generator, which is responsible for generating the high magnetic field. Next one is the measurement systems, which are responsible for monitoring the sample and the system itself. The last part describes the cryostat system, which allows the extremely cold temperatures in the system.

Pulsed electric field assisted sol-gel preparation of TiO2 particles and their photocatalytic properties

The objective of this thesis was to study the effect of pulsed electric field on the preparation of TiO2 nanoparticles via sol-gel method. The literature part deals with properties of different TiO2 crystal forms, principles of photocatalysis, sol-gel method and pulsed electric field processing. It was expected that the pulsed electric field would have an influence on crystallite size, specific surface area, polymorphism and photocatalytic activity of produced particles. TiO2 samples were prepared by using different frequencies and treatment times of pulsed electric field. The properties of produced TiO2 particles were examined X-ray diffraction (XRD), Raman spectroscopy and BET surface area analysis. The photocatalytic activities of produced TiO2 particles were determined by using them as photocatalysts for the degradation of formic acid under UVA-light. The photocatalytic activities of samples produced with sol-gel method were also compared with the commercial TiO2 powder Aeroxide® (Evonic Degussa GmbH). Pulsed electric field did not have an effect on the morphology of particles. Results from XRD and Raman analysis showed that all produced TiO2 samples were pure anatase. However, pulsed electric field did have an effect on crystallite size, specific surface area and photocatalytic activity of TiO2 particles. Generally, the crystallite sizes were smaller, specific surface areas larger and initial formic acid degradation rates higher for samples that were produced by applying the pulsed electric field. The higher photocatalytic activities were attributed to larger surface areas and smaller crystallite sizes. Though, with all of the TiO2 samples produced by the sol-gel method the initial formic acid degradation rates were significantly slower than with the commercial TiO2 powder.

Vision, image, record : a cultivation of the visual field

I den första delen av den här avhandlingen presenteras en bildens genealogi. Den skildrar hur begreppen för bilden, seendet och jaget utvecklades i relation till varandra i en specifik vetenskaplig och filosofisk kontext. Berättelsen sträcker sig från den tidiga renässansen och det perspektivistiska måleriet, till fotografiets födelse och positivismen. Den här utvecklingen medförde en form av reduktionism i vilken jagets roll – betydelsen av den mänskliga psykologin, vårt omdöme, vår uppmärksamhet och vår vilja – blev förbisedd. Inom den här tanketraditionen uppstod en förskjutning, från en förståelse av bilden som en representation av det tredimensionella rummet på en tvådimensionell yta, till en uppfattning om bilden som en genomskinlig ruta, ett fönster ut mot världen. Idén om avbildningen som en neutral ”blick från ingenstans” kom att förstärka en skeptisk hållning till kommunikation, dialog och vittnesmål och därmed även undergräva vår tillit till varandra och följaktligen vår tillit till oss själva. I den andra delen erbjuder författaren ett alternativ till den tanketradition som behandlas i den första delen. Det som blev förbisett i uppfattningen om en blick från ingenstans var att bilden är ett hjälpmedel då vi bearbetar vårt synfält. Bilden hjälper oss att dela vår syn på saker. Genom den här uppgiften av att dela blir bilden riktningsgivande i våra försök att orientera oss i världen. Jag kan stå bredvid en annan människa och se vad hon ser, men jag vet inte nödvändigtvis hur hon uppfattar det vi ser. Bilden lägger till ett led i det här förhållandet eftersom den inte enbart visar vad den andra ser. När bilden fungerar som den skall visar den också hur den andra ser och på det här sättet blir bilden verksam. Den föreliggande avhandlingen kombinerar epistemologi med vetenskapshistoria och visuella kulturstudier, men dess huvudintresse är filosofiskt. Den befattar sig med filosofiska missförstånd angående avbildning som en mimetisk konstform, kunskap som domesticering och varseblivning som mottagning av data. ------------------------------------------------------ Tämän väitöskirjan ensimmäinen osa selvittää kuvakäsitteen genealogiaa. Se havainnollistaa miten kuvan, näkemisen ja minän käsitteet kehittyivät suhteessa toisiinsa. Kertomus ulottuu varhaisesta renessanssista ja perspektivistisestä maalaustaiteesta, positivismin aikakauteen ja valokuvan syntyyn. Tämä kehitys toi mukanaan reduktionismin jossa minän rooli – ihmisen psykologian merkitys, meidän arviointikyky, meidän huomiokyky sekä meidän tahtomme – vaipui unohduksiin. Ajatusmaailmassa tapahtui siirtymä, kuvan merkitys vaihtui käsityksestä jossa se on kolmiulotteisen tilan representaatio kaksiulotteisella pinnalla, käsitykseen jossa kuva on läpinäkyvä ruutu, ikkuna kohti maailmaa. Ajatus kuvasta neutraalin näkökulman kantajana vahvisti skeptistä suhtautumista kommunikaatiota, dialogisuutta ja subjektiivisuutta kohtaan. Tämä skeptisyys ilmentyi myös vahvana epäluottamuksena ihmiskeskeisyyttä ja toiseutta kohtaan. Toisessa osassa tekijä tarjoaa vaihtoehdon tälle skeptiselle ajatusmaailmalle jota tarkastellaan ensimmäisessä osassa. Kuva on myös väline joka auttaa meitä jäsentämään meidän näkökenttäämme. Se auttaa meitä jakamaan meidän käsityksiä toistemme kanssa. Tämä näkemisen jakamisen käytäntö on kuvan keskeinen tehtävä. Voin seistä toisen ihmisen vieressä ja nähdä samat asiat kuin hän, mutta en välttämättä ymmärrä miten hän näkee nämä asiat. Kuva lisää jotain olennaista tähän suhteeseen. Kun kuva toimii niin kun sen kuuluu toimia, se näyttää myös miten toinen näkee, tällä tavalla kuvasta tulee välittäjä. Tämä väitöskirja yhdistää epistemologiaa, tieteen historiaa ja visuaalisen kulttuurin tutkimusta, mutta sen pääasiallinen tavoite on filosofinen. Se käsittelee filosofisia väärinkäsityksiä koskien kuvan eideettisyyttä.

Influence of Pulsed-Electric Field Irradiation in Crystallization

The growing pharmaceutical interest, among others, in the polymorphic composition of the emerging solid end-products from production processes has been traced to the need for attainment of high product purity. This is more so as the presence of different polymorphs may constitute physical impurity of the product. Hence, the need for optimization of the yield of desired product component(s) through controlled crystallization kinetics for instance. This study was carried out to investigate the impact of pulsed electric field (PEF) irradiation on the crystal morphology of glycine obtained by cooling crystallization (without seeding) from commercial glycine sample in distilled deionized water solution. In doing so, three different pulse frequencies (294, 950 and 145 Hz) and a case without PEF were studied at three cooling rates (5, 10 and 20 ºC/h). The crystal products obtained were analyzed for polymorphic composition by powder x-ray diffraction (PXRD) and Fourier transform infrared (FTIR) spectroscopy while the particles characterization was done on Morphologi G3. The results obtained from this study showed that pulsed electric field irradiation had significant impact on metastability of the aqueous solution as well as on the polymorphic composition of the end product. With increasing PEF frequency applied, nucleation started earlier and the γ-glycine polymorph content of the product crystals increased. These were found to have been aided by cooling rate, as the most significant effect was observed at 5 ºC/h. It was also discovered that PEF application had no measurable impact on the pH of the aqueous solution as well as the size distribution of the particles. Cooling on the contrary was believed to be responsible for the broadening of the particle size distribution with a downward shift of the lower limit of the raw material from about 100 μm to between 10 and 50 μm.

Fluvio-morphological processes of meander bends - Combining conventional field measurements, close-range remote sensing and computational modelling

Meandering rivers have been perceived to evolve rather similarly around the world independently of the location or size of the river. Despite the many consistent processes and characteristics they have also been noted to show complex and unique sets of fluviomorphological processes in which local factors play important role. These complex interactions of flow and morphology affect notably the development of the river. Comprehensive and fundamental field, flume and theoretically based studies of fluviomorphological processes in meandering rivers have been carried out especially during the latter part of the 20th century. However, as these studies have been carried out with traditional field measurements techniques their spatial and temporal resolution is not competitive to the level achievable today. The hypothesis of this study is that, by exploiting e increased spatial and temporal resolution of the data, achieved by combining conventional field measurements with a range of modern technologies, will provide new insights to the spatial patterns of the flow-sediment interaction in meandering streams, which have perceived to show notable variation in space and time. This thesis shows how the modern technologies can be combined to derive very high spatial and temporal resolution data on fluvio-morphological processes over meander bends. The flow structure over the bends is recorded in situ using acoustic Doppler current profiler (ADCP) and the spatial and temporal resolution of the flow data is enhanced using 2D and 3D CFD over various meander bends. The CFD are also exploited to simulate sediment transport. Multi-temporal terrestrial laser scanning (TLS), mobile laser scanning (MLS) and echo sounding data are used to measure the flow-based changes and formations over meander bends and to build the computational models. The spatial patterns of erosion and deposition over meander bends are analysed relative to the measured and modelled flow field and sediment transport. The results are compared with the classic theories of the processes in meander bends. Mainly, the results of this study follow well the existing theories and results of previous studies. However, some new insights regarding to the spatial and temporal patterns of the flow-sediment interaction in a natural sand-bed meander bend are provided. The results of this study show the advantages of the rapid and detailed measurements techniques and the achieved spatial and temporal resolution provided by CFD, unachievable with field measurements. The thesis also discusses the limitations which remain in the measurement and modelling methods and in understanding of fluvial geomorphology of meander bends. Further, the hydro- and morphodynamic models’ sensitivity to user-defined parameters is tested, and the modelling results are assessed against detailed field measurement. The study is implemented in the meandering sub-Arctic Pulmanki River in Finland. The river is unregulated and sand-bed and major morphological changes occur annually on the meander point bars, which are inundated only during the snow-melt-induced spring floods. The outcome of this study applies to sandbed meandering rivers in regions where normally one significant flood event occurs annually, such as Arctic areas with snow-melt induced spring floods, and where the point bars of the meander bends are inundated only during the flood events.