Active Magnetic Bearing System Identification Methods and Rotor Model Updating

Active magnetic bearing is a type of bearing which uses magnetic field to levitate the rotor. These bearings require continuous control of the currents in electromagnets and data from position of the rotor and the measured current from electromagnets. Because of this different identification methods can be implemented with no additional hardware. In this thesis the focus was to implement and test identification methods for active magnetic bearing system and to update the rotor model. Magnetic center calibration is a method used to locate the magnetic center of the rotor. Rotor model identification is an identification method used to identify the rotor model. Rotor model update is a method used to update the rotor model based on identification data. These methods were implemented and tested with a real machine where rotor was levitated with active magnetic bearings and the functionality of the methods was ensured. Methods were developed with further extension in mind and also with the possibility to apply them for different machines with ease.

The Formation Of Internationalization Strategies Within The Construction Industry:Vision and Strategy

Internationalization represents a complex topic that has been researched for quite some time. However, since it continues to be extremely current a topic, its significance has not diminished, but maybe even increased in importance. Companies today face extreme pressure to enter new markets in the hope of growing, becoming more profitable, increasing market share, attracting new customers and meeting the requirements of its share- and stakeholders. In the increasingly global business environment of today, companies are facing both challenges and possible advantages of internationalization. Few companies are not operating internationally and it is becoming the question of ‘Why not?’ rather than ‘Why?’ to internationalize business operations. Internationalization and the importance of strategy are discussed in this research from the viewpoint of three case companies that were interviewed about internationalization strategies. This research project is a qualitative study that answers the research question of How is a business strategy constructed for entering a new market? The sub-questions are • How are goals set and what indicators are used to monitor the achievement of these goals? • What are the key characteristics of a strategy implementation process? The research method chosen for this study is a multiple-case study. Three case companies were chosen for the interviews in order to gain in-depth data of internationalization strategies within the construction industry.

Relay protection in active distribution networks

Increasingly growing share of distributed generation in the whole electrical power system’s generating system is currently a worldwide tendency, driven by several factors, encircling mainly difficulties in refinement of megalopolises’ distribution networks and its maintenance; widening environmental concerns adding to both energy efficiency approaches and installation of renewable sources based generation, inherently distributed; increased power quality and reliability needs; progress in IT field, making implementable harmonization of needs and interests of different-energy-type generators and consumers. At this stage, the volume, formed by system-interconnected distributed generation facilities, have reached the level of causing broad impact toward system operation under emergency and post-emergency conditions in several EU countries, thus previously implementable approach of their preliminary tripping in case of a fault, preventing generating equipment damage and disoperation of relay protection and automation, is not applicable any more. Adding to the preceding, withstand capability and transient electromechanical stability of generating technologies, interconnecting in proximity of load nodes, enhanced significantly since the moment Low Voltage Ride-Through regulations, followed by techniques, were introduced in Grid Codes. Both aspects leads to relay protection and auto-reclosing operation in presence of distributed generation generally connected after grid planning and construction phases. This paper proposes solutions to the emerging need to ensure correct operation of the equipment in question with least possible grid refinements, distinctively for every type of distributed generation technology achieved its technical maturity to date and network’s protection. New generating technologies are equivalented from the perspective of representation in calculation of initial steady-state short-circuit current used to dimension current-sensing relay protection, and widely adopted short-circuit calculation practices, as IEC 60909 and VDE 0102. The phenomenon of unintentional islanding, influencing auto-reclosing, is addressed, and protection schemes used to eliminate an sustained island are listed and characterized by reliability and implementation related factors, whereas also forming a crucial aspect of realization of the proposed protection operation relieving measures.

Työnantajabrandin vision suhde todellisuuteen

Kilpailu osaavasta työvoimasta on saanut yritykset panostamaan työnantajabrandiinsa. Työnantajabrandi yhtenä yrityksen brandipääoman osa-alueena auttaa yrityksiä erottumaan kilpailijoista ja siten houkuttelemaan yritykseen sopivia työntekijöitä sekä säilyttämään jo olemassa olevat työntekijät. Työnantajabrandi ei aina näyttäydy yrityksen työntekijöille tai –hakijoille niin kuin yritys sen haluaisi näyttäytyvän. Henkilöstöhallinnon ja johdon visio saattaa siis olla ristiriidassa sen kanssa, miten brandi todellisuudessa koetaan. Mikäli yritys ei pysty viestittämään oikeanlaista brandi-imagoa tai säilyttämään brandilupauksiaan vaikuttaa tämä yrityksen työntekijöiden sitoutumiseen ja tyytyväisyyteen negatiivisesti. Lisäksi yritykseen hakeutuu töihin yrityksen arvomaailmaan sopimattomia työntekijöitä. Tutkimuksen tarkoituksena on selvittää työnantajabrandin vision suhdetta todellisuuteen case-yrityksen kautta. Case-yritykseksi on valittu kansainvälinen konsultointiyritys, jolle osaava työvoima on elinehto. Tutkimusmenetelmäksi valittiin puolistrukturoidut haastattelut eli aihetta on lähestytty laadullisen menetelmän kautta. Tutkimukseen haastateltiin vision selvittämiseksi case-yrityksen henkilöstöhallintoa sekä perehdyttiin olemassa olevaan materiaaliin yrityksen brandista. Vision toteutumisen selvittämiseksi haastateltiin 19 työntekijää yrityksen kahdesta eri liiketoimintayksiköstä. Teorian pohjalta tarkentunut teoreettinen viitekehys pitää sisällään yrityksen psykologisen sopimuksen, sisäisen ja ulkoisen brandiviestinnän sekä organisaatiokulttuurin. Haastattelut rakennettiin näiden teemojen ympärille. Empiirisen osuuden tulokset vahvistavat teoreettista viitekehystä, jonka mukaan psykologisella sopimuksella, brandiviestinnällä ja organisaatiokulttuurilla on vaikutusta siihen, miten työnantajabrandi koetaan yrityksen työntekijöiden keskuudessa. Organisaatiokulttuurin ja sitä ilmentävän brandipersoonallisuuden osalta korostuu yrityksen työntekijöiden sopivuus ja yhtäläisyys yrityksen organisaatiokulttuuriin voimistamaan haluttua brandimielikuvaa. Psykologisen sopimuksen osalta empiria tukee todenmukaisen kuvan luomisen merkitystä yrityksen brandiviestinnässä. Lisäksi psykologisen sopimuksen osalta sosiaaliset edut nähdään tärkeänä tekijänä työnantajassa. Ihmisistä välittämisellä ja työilmapiirillä voidaan nähdä olevan suuri merkitys työntekijöiden työssä viihtymiselle. Työntekijät myös odottavat nykypäivänä nopeaa urakehitystä ja koulutukseen panostamista uraltaan. Lisäksi joustavuus ja vapaa-ajan ja työn tasapainottaminen koetaan tärkeiksi. Haastattelut tukevat myös teoreettisen viitekehyksen oletusta, että yrityksen visio työnantajabrandista eroaa usein siitä kuvasta, joka työntekijöille välittyy

Design and implementation of machine vision system for the mobile assembly robot

The review of intelligent machines shows that the demand for new ways of helping people in perception of the real world is becoming higher and higher every year. This thesis provides information about design and implementation of machine vision for mobile assembly robot. The work has been done as a part of LUT project in Laboratory of Intelligent Machines. The aim of this work is to create a working vision system. The qualitative and quantitative research were done to complete this task. In the first part, the author presents the theoretical background of such things as digital camera work principles, wireless transmission basics, creation of live stream, methods used for pattern recognition. Formulas, dependencies and previous research related to the topic are shown. In the second part, the equipment used for the project is described. There is information about the brands, models, capabilities and also requirements needed for implementation. Although, the author gives a description of LabVIEW software, its add-ons and OpenCV which are used in the project. Furthermore, one can find results in further section of considered thesis. They mainly represented by screenshots from cameras, working station and photos of the system. The key result of this thesis is vision system created for the needs of mobile assembly robot. Therefore, it is possible to see graphically what was done on examples. Future research in this field includes optimization of the pattern recognition algorithm. This will give less response time for recognizing objects. Presented by author system can be used also for further activities which include artificial intelligence usage.