Suomalaisten osakeyhtiöiden mahdollisuus vaikuttaa verotukseensa ETA-alueella

Tutkielmassa on selvitetty suomalaisten osakeyhtiöiden mahdollisuuksia vaikuttaa liiketoimintansa Euroopan talousalueella (ETA). Tutkielmassa on tarkasteltu EY:n sääntelyä, EY-tuomioistuimen tuomitsemia ennakkotapauksia ja niiden vaikutuksia Suomen lainsäädäntöön suomalaisten osakeyhtiöiden kannalta. Tutkielma osoittaa yhteisön ylikansallisen ohjauksen vaikuttaneen kansalliseen lainsäädäntöön, mikä on tarjonnut suomalaisille osakeyhtiöille uusia mahdollisuuksia kehittää liiketoimintaansa verotuksen ja veroneutraalien yritysjärjestelyiden osalta ETA-alueella. EY-tuomioistuin on tuomioissaan kuitenkin jättänyt tiettyjä oikeuttamisperusteita jäsenvaltioille. Niiden perusteella valtiot voivat vaikuttaa osakeyhtiöiden verotukseen ja veroneutraaleihin yritysjärjestelyihin ETA-alueella, vaikka oikeuttamisperusteet lähtökohtaisesti rikkovat ylikansallista sääntelyä. EY:n ylikansallinen ohjaus tulee myös tulevaisuudessa vaikuttaa merkittävästi suomalaisten osakeyhtiöiden mahdollisuuteen harjoittaa liiketoimintaansa ETA-alueella. Ylikansallisen sääntelyn hyödyntäminen täysimääräisesti mahdollistuu suomalaisissa osakeyhtiöissä vasta, kun yhteisön alueelle luodaan yhtenäinen sääntely kaikkia osakeyhtiöitä kohtaan.

System Investigation for Hybrid Electric Vehicle

A hybrid electric vehicle is a fast-growing concept in the field of vehicle industry. Nowadays two global problems make manufactures to develop such systems. These problems are: the growing cost of a fuel and environmental pollution. Also development of controlled electric drive with high control accuracy and reliability allows improving of vehicle drive characteristics. The objective of this Diploma Thesis is to investigate the possibilities of electrical drive application for new principle of parallel hybrid vehicle system. Electric motor calculations, selection of most suitable control system and other calculations are needed. This work is not final work for such topic. Further investigation with more precise calculations, modeling, measurements and cost calculations are needed to answer the question if such system is efficient.

Nanoparticle Labels in Bioaffinity Assays

Nanoparticles offer adjustable and expandable reactive surface area compared to the more traditional solid phase forms utilized in bioaffinity assays due to the high surface to-volume ratio. The versatility of nanoparticles is further improved by the ability to incorporate various molecular complexes such as luminophores into the core. Nanoparticle labels composed of polystyrene, silica, inorganic crystals doped with high number of luminophores, preferably lanthanide(III) complexes, are employed in bioaffinity assays. Other label species such as semiconductor crystals (quantum dots) or colloidal gold clusters are also utilized. The surface derivatization of such particles with biomolecules is crucial for the applicability to bioaffinity assays. The effectiveness of a coating is reliant on the biomolecule and particle surface characteristics and the selected coupling technique. The most critical aspects of the particle labels in bioaffinity assays are their size-dependent features. For polystyrene, silica and inorganic phosphor particles, these include the kinetics, specific activity and colloidal stability. For quantum dots and gold colloids, the spectral properties are also dependent on particle size. This study reports the utilization of europium(III)-chelate-embedded nanoparticle labels in the development of bioaffinity assays. The experimental covers both the heterogeneous and homogeneous assay formats elucidating the wide applicability of the nanoparticles. It was revealed that the employment of europium(III) nanoparticles in heterogeneous assays for viral antigens, adenovirus hexon and hepatitis B surface antigen (HBsAg), resulted in sensitivity improvement of 10-1000 fold compared to the reference methods. This improvement was attributed to the extreme specific activity and enhanced monovalent affinity of the nanoparticles conjugates. The applicability of europium(III)-chelate-doped nanoparticles to homogeneous assay formats were proved in two completely different experimental settings; assays based on immunological recognition or proteolytic activity. It was shown that in addition to small molecule acceptors, particulate acceptors may also be employed due to the high specific activity of the particles promoting proximity-induced reabsorptive energy transfer in addition to non-radiative energy transfer. The principle of proteolytic activity assay relied on a novel dual-step FRET concept, wherein the streptavidin-derivatized europium(III)-chelate-doped nanoparticles were used as donors for peptide substrates modified with biotin and terminal europium emission compliant primary acceptor and a secondary quencher acceptor. The recorded sensitized emission was proportional to the enzyme activity, and the assay response to various inhibitor doses was in agreement with those found in literature showing the feasibility of the technique. Experiments regarding the impact of donor particle size on the extent of direct donor fluorescence and reabsorptive excitation interference in a FRET-based application was conducted with differently sized europium(III)-chelate-doped nanoparticles. It was shown that the size effect was minimal

Salient Pole Synchronous Machine Modelling in an Industrial Direct Torque Controlled Drive Application

Synchronous motors are used mainly in large drives, for example in ship propulsion systems and in steel factories' rolling mills because of their high efficiency, high overload capacity and good performance in the field weakening range. This, however, requires an extremely good torque control system. A fast torque response and a torque accuracy are basic requirements for such a drive. For large power, high dynamic performance drives the commonly known principle of field oriented vector control has been used solely hitherto, but nowadays it is not the only way to implement such a drive. A new control method Direct Torque Control (DTC) has also emerged. The performance of such a high quality torque control as DTC in dynamically demanding industrial applications is mainly based on the accurate estimate of the various flux linkages' space vectors. Nowadays industrial motor control systems are real time applications with restricted calculation capacity. At the same time the control system requires a simple, fast calculable and reasonably accurate motor model. In this work a method to handle these problems in a Direct Torque Controlled (DTC) salient pole synchronous motor drive is proposed. A motor model which combines the induction law based "voltage model" and motor inductance parameters based "current model" is presented. The voltage model operates as a main model and is calculated at a very fast sampling rate (for example 40 kHz). The stator flux linkage calculated via integration from the stator voltages is corrected using the stator flux linkage computed from the current model. The current model acts as a supervisor that prevents only the motor stator flux linkage from drifting erroneous during longer time intervals. At very low speeds the role of the current model is emphasised but, nevertheless, the voltage model always stays the main model. At higher speeds the function of the current model correction is to act as a stabiliser of the control system. The current model contains a set of inductance parameters which must be known. The validation of the current model in steady state is not self evident. It depends on the accuracy of the saturated value of the inductances. Parameter measurement of the motor model where the supply inverter is used as a measurement signal generator is presented. This so called identification run can be performed prior to delivery or during drive commissioning. A derivation method for the inductance models used for the representation of the saturation effects is proposed. The performance of the electrically excited synchronous motor supplied with the DTC inverter is proven with experimental results. It is shown that it is possible to obtain a good static accuracy of the DTC's torque controller for an electrically excited synchronous motor. The dynamic response is fast and a new operation point is achieved without oscillation. The operation is stable throughout the speed range. The modelling of the magnetising inductance saturation is essential and cross saturation has to be considered as well. The effect of cross saturation is very significant. A DTC inverter can be used as a measuring equipment and the parameters needed for the motor model can be defined by the inverter itself. The main advantage is that the parameters defined are measured in similar magnetic operation conditions and no disagreement between the parameters will exist. The inductance models generated are adequate to meet the requirements of dynamically demanding drives.

Henkilöstöresurssien optimointi ja hallinta sataman operaattoriyhtiössä

Työn tavoitteena on selvittää erilaisten työaikamallien ja henkilöstön määrän vaikutuksia Finnsteven henkilöstökustannuksiin ja ylitöiden määrään. Selvitystyö toteutetaan simuloimalla vaihtoehtoisia työaikamalleja ja henkilöstömääriä tilastollisten menetelmien avulla. Työn toisena tavoitteena on ehdottaa yritykselle toimintatapaa suorittaa lopullinen henkilöstöresurssien optimointi. Työn teoriaosuudessa esitellään aluksi yritystä ja sen toimintaympäristöä. Tämän jälkeen tarkastellaan nykyisen TE-sopimuksen mahdollistamia työaikamalleja. Seuraavaksi perustellaan käytettävät tilastolliset menetelmät ja tiedonkeruumenetelmät. Edetessään työ syventyy tarkastelemaan yrityksen tekemän työn kohdentumista aikatyöhön ja ylityöhön sekä viikonpäiville että työvuoroille. Lopuksi kuvataan työn optimoinnissa käytetty logiikka, analysoidaan saatuja tuloksia ja esitellään optimointityökalun toteutussuunnitelma. Diplomityössä tehdyn selvityksen mukaan satamatyössä tehdään nykyisellään erittäin paljon ylitöitä. Siten työaikamallien optimointi on perusteltua. Optimoinnilla saavutettavat potentiaaliset kustannussäästöt ovat erittäin huomattavia. Lopullinen optimointi on haastava tehtävä, jota henkilöstöhallinto ei pysty ratkaisemaan pelkkään kokemukseensa luottaen. Tuotannonsuunnittelun avuksi tarvitaan täten työkalu, joka palvelee paitsi mallien luontia, toimii suunnittelun apuna jatkossakin.

Reaktoreiden termisen tehon laskennan epävarmuuksien kartoitus

Diplomityössä selvitettiin Fortum Power and Heat Oy:n Loviisan VVER-440 painevesireaktorilaitosten termisen tehon laskentaan liittyviä epävarmuuksia. Laitoksen turvallisuusteknisissä käyttöehdoissa (TTKE) määrätään reaktorin suurimmaksi sallituksi lämpötehoksi 1500 MW. Tähän perustuen haluttiin selvittää nykyiseen RT1 laskentaan liittyvät epävarmuudet tarkastamalla nykyinen laskenta ja siinä käytetyt termohydrauliset laskentasovitteet. Työn alussa selostetaan lyhyesti Loviisan voimalaitoksen toimintaperiaate, jonka jälkeen esitellään laskentaan osallistuvat prosessimittaukset ja niihin liittyvät epävarmuustekijät. Mittauksille määritettiin epävarmuudet käyttäen hyödyksi komponenttivalmistajien tietoja sekä laitoksen kalibrointitodistuksia ja näiden lisäksi laskettiin standardin mukainen virhe virtauslaipoille. Edellä mainittujen virheiden perusteella voitiin laskea tehon epävarmuudet yksittäiselle höyrystimelle, josta edelleen varianssien summamenetelmällä saatiin reaktorin termiselle teholle 0,78 %:n epävarmuus 95 % luottamustasolla. Laskettua tehon epävarmuutta verrattiin Monte Carlo -menetelmällä suoritettuun tarkistuslaskentaan, jolla termisen tehon epävarmuudeksi saatiin 0,53 %, luottamustason ollessa 95 %. Työssä tarkasteltiin keskiarvotuksen vaikutusta mittausdataan. Näissä tarkasteluissa havaittiin pinnansäädöstä aiheutuva reaktoritehon huojunta, joka oli työn merkittävin havainto.

Nurse-led interpersonal counselling for depressive symptoms in patients with myocardial infarction

The broad interest of this intervention study is in two worldwide remarkable diseases, myocardial infarction and depression. The purpose of the 18-month follow-up study was to evaluate the outcomes of interpersonal counselling implemented by a psychiatric nurse, and to examine the recovery experienced by the patients after myocardial infarction. The interpersonal counseling consisted of a short-term (max 6 sessions) depression-focused intervention modified for myocardial infarction patients. The main principle of interpersonal counselling is that depressive symptoms relate to interpersonal relations. The measured outcomes of the intervention consisted of changes in depressive symptoms and distress, health-related quality of life and the use of health care services. The data consisted of 103 patients with acute myocardial infarction and with sufficient knowledge of Finnish language, and they were randomized into intervention group (n=51) and control group (n=52) with standard care. Depressive symptoms were measured using Beck Depression Inventory, and distress using Symptom Checklist-25. The instrument to measure health-related quality of life was EuroQol-5 Dimensions. All instruments were used at three measurements: in hospital, at 6 months and at 18 months after hospital discharge. The Use of Health Care Services questionnaire was used during the 6- and 18-month period after hospital discharge. In addition, satisfaction with the intervention and with information received from the health-care professional was evaluated during the follow-up. To examine recovery, the patients kept diaries during a 6-month period and they were interviewed at 18 months after myocardial infarction. The number of patients with depressive symptoms decreased significantly more in the intervention group compared with the control group during 18 months of follow-up. Distress decreased significantly more among patients under 60 years in the intervention group than in the control group, but the difference was not significant between the groups. No differences in the changes of health-related quality of life were found between the groups during follow-up. However, in the group of patients under 60 years, the improvement of health-related quality of life in the intervention was significantly better in the intervention group compared with the control group during the follow-up. During the follow-up period, there was even a decline in the use of somatic specialized health care services in the intervention group and among intervention patients who had no other long-term disease. Considering recovery experienced by the patients, main categories including many supporting and inhibiting factors and subcategories were identified: clinical and physical, psychological, social, functional and professional category. No differences between the groups were found in satisfaction with information received from the professionals. The brief and easy-to-learn intervention, with which the patients were satisfied, seems to decrease depressive symptoms after myocardial infarction. Interpersonal counselling seems to be beneficial especially with younger patients. These results justify adopting depression screening and interpersonal counselling as part of routine care after myocardial infarction. The first stage evaluation of the use of health care services is interesting, and calls for more studies. From the perspective of individual patients, recovery after myocardial infarction seems to consist of many supporting and inhibiting factors. This is something that is important to take into account in developing nursing practice. The results indicate a need for further studies in outcomes of interpersonal counselling and recovery experienced by the patients after myocardial infarction. In addition, the results encourage widening the research perspective to nursing administration and educational level.

Military crisis management in the next decade (2020-2030) : inducing consent or relying on compliance?

The most outstanding conceptual challenge of modern crisis management is the principle of consent. It is not a problem only at the operational level - it challenges the entire decision-making structures of crisis management operations. In post-cold war times and especially in the 21st century, there has been a transition from peacekeeping with limited size and scope towards large and complex peace operations. This shift has presented peace operations with a dilemma. How to balance between maintaining consent for peace operations, whilst being able to use military force to coerce those attempting to wreck peace processes? To address such a dilemma, this research aims to promote understanding, on what can be achieved by military crisis management operations (peace support operations) in the next decade. The research concentrates on the focal research question: Should military components induce consent or rely on the compliance of conflicting parties in crisis management operations of the next decade (2020 – 2030)? The focus is on military – political strategic level considerations, and especially on the time before political decisions to commit to a crisis management operation. This study does not focus on which actor or organisation should intervene. The framework of this thesis derives from the so called ‘peacebuilding space’, the scope of peace operations and spoiler theory. Feasibility of both peace enforcement and peacekeeping in countering future risk conditions are analysed in this framework. This future-orientated qualitative research uses the Delphi-method with a panel of national and international experts. Citation analysis supports identification of relevant reference material, which consists of contemporary literature, the Delphi-questionnaires and interviews. The research process followed three main stages. In the first stage, plausible future scenarios and risk conditions were identified with the Delphi-panel. In the second stage, operating environments for peace support operations were described and consequent hypotheses formulated. In the third stage, these hypotheses were tested on the Delphi-panel. The Delphi-panel is sufficiently wide and diverse to produce plausible yet different insights. The research design utilised specifically military crisis management and peace operations theories. This produced various and relevant normative considerations. Therefore, one may argue that this research; which is based on accepted contemporary theory, hypotheses derived thereof and utilising an expert panel, contributes to the realm of peace support operations. This research finds that some degree of peace enforcement will be feasible and necessary in at least the following risk conditions: failed governance; potential spillover of ethnic, religious, ideological conflict; vulnerability of strategic chokepoints and infrastructures in ungoverned spaces; as well as in territorial and extra-territorial border disputes. In addition, some form of peace enforcement is probably necessary in risk conditions pertaining to: extremism of marginalised groups; potential disputes over previously uninhabited and resource-rich territories; and interstate rivalry. Furthermore, this research finds that peacekeeping measures will be feasible and necessary in at least risk conditions pertaining to: potential spillover of ethnic, religious, ideological conflict; uncontrolled migration; consequences from environmental catastrophes or changes; territorial and extra-territorial border disputes; and potential disputes over previously uninhabited and resource-rich territories. These findings are all subject to both generic and case specific preconditions that must exist for a peace support operation. Some deductions could be derived from the research findings. Although some risk conditions may appear illogical, understanding the underlying logic of a conflict is fundamental to understanding transition in crisis management. Practitioners of crisis management should possess cognizance of such transition. They must understand how transition should occur from threat to safety, from conflict to stability – and so forth. Understanding transition is imperative for managing the dynamic evolution of preconditions, which begins at the outset of a peace support operation. Furthermore, it is pertinent that spoilers are defined from a peace process point of view. If spoilers are defined otherwise, it changes the nature of an operation towards war, where the logic is breaking the will of an enemy - and surrender. In peace support operations, the logic is different: actions towards spoilers are intended to cause transition towards consent - not defeat. Notwithstanding future developments, history continues to provide strategic education. However, the distinction is that the risk conditions occur in novel futures. Hence, lessons learned from the past should be fitted to the case at hand. This research shows compelling evidence that swaying between intervention optimism and pessimism is not substantiated. Both peace enforcement and peacekeeping are sine qua non for successful military crisis management in the next decade.

Consumer Attitudes on Aroma Printing

Olfactory packaging is an emerging technology which uses the aromatic capsules to release various scents. Normally, manufacturers add these aromatic capsules in the printing ink, the label or packaging material itself. When the aromatic capsules meet suitable release triggers, the scents will be released. The common release triggers are external forces, temperature changes, humidity changes and so on. The aim for this Masters of Science Thesis is to understand the aroma printing technology from literature and make market research for this kind of technology. The main target is to collect the current technology principle of aroma packaging and figure out how they are implemented on products with those. In addition, an investigation is made about consumers' attitudes from Chinese and Finnish market through the questionnaire, and the market potential is analyzed as well. The key points researched in this work are: the general attitudes on aroma printing technology, market potential and economic possibilities. This thesis specifies the main technologies used in aroma printing, the solutions of products with aroma packaging and the original results of the questionnaires. It also includes analysis of the acceptance of Chinese and Finnish consumers, what are their opinions of the aroma printing technology and the products packed by aroma printing technology. In addition, various factors which impact the market is discussed in the thesis. At last, some comparisons are made from the point of views of similarities and differences between Chinese and Finnish market.

Pretreatment processes in gold recovery by thiosulphate leaching

This thesis describes several different pretreatment processes for gold concentrates and ores. The thesis is divided to theoretical part and experimental part. The theoretical part presents the operating principle of the main pretreatment methods and their suitability for thiosulphate leaching. In the theoretical part also the whole recovery process for gold from ore to elemental gold is presented. In the experimental part the study is focused on pretreatment of sulphidic refractory concentrates with mechanical activation and chemical oxidation under alkaline environment; and their effect on leachability in the thiosulphate leaching. In the experimental part a combined 2-step process, where chemical oxidation under ammoniacal environment is cascaded with thiosulphate leaching in the same conditions, is also tested. The main sulphuric mineral components in the studied refractory concentrate are pyrite (49.4 %) and arsenopyrite (27.7 %). The gold content in the concentrate is 11.3 ppm and silver content is 90 ppm. Without pretreatment the gold conversion in thiosulphate leaching was 30 %, which was analyzed at the time point of 9 hours. At that time the silver conversion was 17 %. By using mechanical activation the gold conversion reached was 59 % and silver conversion 26 %. With chemical oxidation under alkaline environment, where the used chemical was sodium hydroxide, the reached conversion of gold was 72 % and 31 % for silver. In the combined oxidation and leaching experiment the conversion of gold remained at 49 % and 18 % for silver.

Vesihöyrypiirin kiertolaskenta kuplapetikattilassa

Työssä selvitetään kiertolaskennan periaatteita kuplapetikattilassa, esitetään lyhyesti kattilan toimintaperiaate ja paneudutaan alan laskentaohjelmistoihin. Luonnonkierto kattilan vesihöyrypiirissä on seurausta hydrostaattisesta paineesta, joka aiheutuu tiheyserosta nousu- ja laskuputkien välillä. Kiertolaskennassa on huomioitava kaksifaasivirtauksen ominaispiirteet. Höyry ja neste virtaavat putkistossa eri nopeuksilla, jolloin esimerkiksi painehäviön määrityksessä käytetään erilaisia korrelaatioita ja käyrästöjä. Kaksifaasivirtauksen laskennassa tarvitaan kolmea eri taseyhtälöä: energiatasetta, massatasetta ja liikemäärätasetta. Luonnonkiertokattiloissa höyrykierron suunnittelussa on kaksi pääasiallista ehtoa. Ensimmäiseksi tulee varmistaa riittävä kiertoveden massavirta, jotta vältetään höyrystinputkien puhki palaminen. Toiseksi tulee välttää höyrystinputken pinnan lämpötilavaihteluita ja värähtelyitä. Alustavassa luonnonkierron mitoituksessa turvaudutaan kokemusperäiseen tietoon. Myöhemmässä tarkemmassa mitoituksessa käytettäviä ohjelmistoja ovat NOWA sekä kaupalliset PPSD ja Apros. Laskenta lähtee liikkeelle siitä, että lasketaan ensin vesihöyrykierron massavirrat erilaisilla lämpökuormilla ja höyryntuotanto määritellään painehäviöiden perusteella. NOWA- ja PPSD- ohjelmistoilla tehtyjen esimerkkilaskelmien perusteella voidaan sanoa, että tulokset riippuvat käytetystä laskentamallista.

Biolietteen kuiva-ainepitoisuuden parantaminen elektro-kuivauksen avulla

Tässä työssä tutkittiin sähkön käyttömahdollisuuksia metsäteollisuuden jäteveden-puhdistamolla syntyvän biolietteen kuivauksessa. Lisäksi selvityksen kohteena olivat lietteen sähkökuivaukseen vaikuttavat tekijät. Työn kirjallisessa osassa perehdyttiin lietteiden syntyyn jätevedenpuhdistamolla sekä lietteiden ominaisuuksiin. Työssä tutustuttiin myös lietteiden käsittelyyn ja siinä käytettäviin tekniikoihin. Ennen työn kokeellista osaa esiteltiin sähkökuivauksen periaate sekä sähkökuivaukselle aiemmin tehtyjä tutkimuksia ja niistä saatuja kokemuksia. Myös tuotteistetut elektrokuivauksen sovellukset olivat osa työtä. Kokeellisessa osassa keskityttiin varsinaisiin sähkökuivauskokeisiin. Tutkimukset suoritettiin suodatuskokein, jotka toteutettiin imuun perustuvalla Büchner-suodattimella sekä painesuodattimella. Kokeissa tutkittiin tasavirran, virran pulssituksen ja vaihtovirran vaikutusta metsäteollisuuden primääri- ja biolietteeseen. Tasavirtatutkimuksissa sähkövirtaa johdettiin lietteeseen suodatuksen aikana, kun taas vaihtovirtaa testattaessa liete käsiteltiin ensin sähköllä ja suodatettiin erikseen. Suodatuskokeiden lisäksi tutkimuksissa tarkkailtiin lietteiden kuiva-ainepitoisuuksia, redox-potentiaalia, lämpötilaa, pH:ta ja sähkönjohtokykyä. Lietteitä tutkittiin myös tuhkapitoisuuden suhteen sekä suoritettiin solututkimuksia fluoresenssilukijan avulla. Työn laboratoriotutkimukset osoittivat sähkön vaikuttavan selkeästi biolietteen ve-denerotuskykyyn: sähkö nopeutti lietteen suodatusta parhaimmillaan yli 70 %. Säh-kökuivauksella lietteen kuiva-ainepitoisuudet pysyivät samoina, mutta suodatus nopeutui ja suodatusajat jopa puolittuivat. Myös lietteen sähkönjohtokyky kasvoi sähkökäsittelyn aikana, mikä viittasi veden vapautumiseen solujen sisältä. Lietteen kunto ja ominaisuudet, polymeeri, sekoitus sekä sähkökäsittelyn parametrit olivat tärkeässä asemassa sähkökuivauksen onnistumisen kannalta.

Tunable lumped-element bandpass filters for Cognitive Radio application

In this thesis the design of bandpass filters tunable at 400 MHz – 800 MHz was under research. Microwave filters are vital components which provide frequency selectivity in wide variety of electronic systems operating at high frequencies. Due to the occurrence of multi-frequency bands communication and diverse applications of wireless devices, requirement of tunable filters exists. The one of potential implementation of frequency-agile filters is frontends and spectrum sensors in Cognitive Radio (CR). The principle of CR is to detect and operate at a particular available spectrum without interfering with the primary user’s signals. This new method allows improving the efficiency of utilizing allocated spectrum such as TV band (400 MHz – 800 MHz). The focus of this work is development of sufficiently compact, low cost tunable filters with quite narrow bandwidth using currently available lumped-element components and PCB board technology. Filter design, different topologies and methods of tuning of bandpass filters are considered in this work. As a result, three types of topologies of bandpass filter were simulated and realised. They use digitally tunable capacitors (DTCs) for adjusting central frequency at TV "white space" spectrum. Measurements revealed that schematics presented in this work have proper output response and filters are successfully tuned by DTCs.

Yritysvastuun johtaminen pk-yrityksen näkökulmasta

Tutkimuksen tavoitteena on tunnistaa yritysvastuusta saatavilla olevasta tutkimustiedon, työkalujen ja johtamismenetelmien joukosta ne näkökulmat, jotka selkeimmin palvelevat pk-yrityksen käytännön liiketoimintaa. Tutkimus koostuu kirjallisuustutkimuksena tehdystä teoriarungosta ja kolmeen case-tutkimukseen pohjautuvasta soveltavasta osasta. Tutkimuksen tuloksena on todettu, että yritysvastuu ei jäsenny tällä hetkellä kovin hyvin pk-yrityksen näkökulmasta. Yritysvastuuta ei nähdä pk-yrityksissä useinkaan mahdollisuutena, vaan rasitteena, ylimääräisenä vaatimuksena. Vastuullisuuden periaate nähdään hyvänä, mutta termien raskaus ja ajattelutavan muodollisuus koetaan vaikeiksi. Johtamisen työkalut ovat byrokraattisia, mikä haittaa suunnitelmallisuutta. Tehokas sidosryhmäanalyysin hyödyntäminen osana järjestelmällistä yritysvastuun johtamista voi kuitenkin tuoda myös pk-yritykselle strategista etua. Yhteisen arvon luominen on mahdollista, jolloin yrityksen etu ja yhteiskunnan etu yhdistyvät tehokkaimmalla mahdollisella tavalla.

Excessive functions, Appell polynomials and optimal stopping

The main topic of the thesis is optimal stopping. This is treated in two research articles. In the first article we introduce a new approach to optimal stopping of general strong Markov processes. The approach is based on the representation of excessive functions as expected suprema. We present a variety of examples, in particular, the Novikov-Shiryaev problem for Lévy processes. In the second article on optimal stopping we focus on differentiability of excessive functions of diffusions and apply these results to study the validity of the principle of smooth fit. As an example we discuss optimal stopping of sticky Brownian motion. The third research article offers a survey like discussion on Appell polynomials. The crucial role of Appell polynomials in optimal stopping of Lévy processes was noticed by Novikov and Shiryaev. They described the optimal rule in a large class of problems via these polynomials. We exploit the probabilistic approach to Appell polynomials and show that many classical results are obtained with ease in this framework. In the fourth article we derive a new relationship between the generalized Bernoulli polynomials and the generalized Euler polynomials.