Recovery of carboxylic acids from aqueous streams by extraction and back extraction

Separation of carboxylic acids from aqueous streams is an important part of their manufacturing process. The aqueous solutions are usually dilute containing less than 10 % acids. Separation by distillation is difficult as the boiling points of acids are only marginally higher than that of water. Because of this distillation is not only difficult but also expensive due to the evaporation of large amounts of water. Carboxylic acids have traditionally been precipitated as calcium salts. The yields of these processes are usually relatively low and the chemical costs high. Especially the decomposition of calcium salts with sulfuric acid produces large amounts of calcium sulfate sludge. Solvent extraction has been studied as an alternative method for recovery of carboxylic acids. Solvent extraction is based on mixing of two immiscible liquids and the transfer of the wanted components form one liquid to another due to equilibrium difference. In the case of carboxylic acids, the acids are transferred from aqueous phase to organic solvent due to physical and chemical interactions. The acids and the extractant form complexes which are soluble in the organic phase. The extraction efficiency is affected by many factors, for instance initial acid concentration, type and concentration of the extractant, pH, temperature and extraction time. In this paper, the effects of initial acid concentration, type of extractant and temperature on extraction efficiency were studied. As carboxylic acids are usually the products of the processes, they are wanted to be recovered. Hence the acids have to be removed from the organic phase after the extraction. The removal of acids from the organic phase also regenerates the extractant which can be then recycled in the process. The regeneration of the extractant was studied by back-extracting i.e. stripping the acids form the organic solution into diluent sodium hydroxide solution. In the solvent regeneration, the regenerability of different extractants and the effect of initial acid concentration and temperature were studied.

How (not) to interview children : interviews with young children in sexual abuse investigations in Finland

The present thesis had two main objectives: The first was to assess how child sexual abuse (CSA) interviews in Finland are conducted through analysing the interviewing techniques applied and the language used by the interviewers, as well as to suggest ways to improve interviews if they were found to have deficiencies. The second main aim was to contribute to the growing research corpus concerning CSA interviews, in particular, by addressing how interviewers follow up information provided by the child, by analysing whether child health care professionals would use childadapted language, and by studying the kind of modifications in the verbal behaviour of interviewers and children that were associated with a) repeated interviews, b) a support person’s presence at the interview, and c) the use of anatomically detailed dolls. Two complementary samples of CSA interviews were analysed. The first one was composed of child interviews with 3-12-year-old children (N = 27) that had been considered problematic by lawyers or other involved professionals (Studies I and IV). The second sample consisted of unselected interviews (N = 43) with children aged 3 to 8 years conducted in a number of hospitals in different parts of the country (Studies II and III). Study I: The verbal interaction between interviewer and child was analysed in a sample of interviews that had been considered to be problematic by involved professionals. Results showed that interviewers used inappropriate questioning techniques, relying on option-posing, specific suggestive and unspecific suggestive questions to a significant extent, these comprising around 50% of all interviewer utterances. The proportion of invitations, which the research community recommends interviewers to rely on, was strikingly low. Invitations and directive utterances were associated with an increase in informative responses by the child in terms of response type, number of new details reported, as well as length of response. The opposite was true for option-posing and suggestive utterances. Longer questions by the interviewer (in number of words) often rendered no reply from the child, whereas shorter questions were followed by descriptive answers. Even after the child had provided an informative answer, interviewers failed to follow up the information in an adequate way and instead continued to rely on focused and leading questions. Study II: Due to the possible bias of the sample analysed in Study I, the most important analyses were rerun with the unselected sample and reported separately. Results were quite similar between the two studies, indicating that the problems observed in Study I, with interviewers relying on option-posing and suggestive questions to a significant extent, are likely to be general and not specific for those interviews. Even if suggestive questions were slightly less and invitations slightly more common in this sample than in the previous study, almost half of the interviewer questions were still optionposing or suggestive, and also in this sample, interviewers failed to follow up information by the child in a facilitating manner. Differentiating between judicial and contextual details showed that while facilitators, invitations, and directive utterances elicited more contextual than judicial details, the opposite was true for specific suggestive utterances. These results might be explained by the reluctance of children to describe sexual details related to the abuse events. Alternatively, they may also be due to children describing incorrect sexual details as a result of suggestive interviewing techniques. Study III: This study examined features of the language used by the interviewers. Interviewer utterances included multiple questions, long statements, complicated grammar and concepts, as well as unclear references to persons and situations. More than a fifth of the interviewer utterances were coded as belonging to at least one of these categories. The results suggest that even professionals who are experienced in interacting with children may have difficulties in using a child-sensitive language, adding to the pool of studies showing similar problems to occur in legal hearings with children conducted by lawyers. As children rarely comment on, or even recognise, their lack of comprehension, the use of a language that is too complex can have detrimental consequences for the outcomes of investigative interviews. Interviewers used different approaches to introduce the topic of abuse. While 15% of the children spontaneously addressed the topic of abuse, probably indicating that they felt confident with the interviewer and the situation, in almost 50% of the cases, the interviewer introduced the topic of abuse in a way that can be considered leading. Interviews were characterised by a lack of structure, apparent in frequent rapid switches of topic by the interviewer. This manner was associated with a decrease in the number of new details provided by the children. Study IV: This study analysed possible changes in the interview dynamics associated with repeated interviewing, the presence of a support person (related to the child), and the use of anatomically detailed (AD) dolls. Repeated interviewing, in combination with suggestive questions, has previously been found to seriously contaminate children’s accounts. In the present material, interviewers used significantly more suggestive utterances in the repeated condition, thus endangering the reliability of the children’s reports. Few studies have investigated the effects of a support person’s presence at the interview. The results of the present study showed that interviewers talked more and children provided less information when a support person was present. Supporting some earlier findings regarding the use of AD dolls, the present results showed that using AD dolls was associated with longer interviewer utterances and shorter, less responsive, and less detailed child responses. Interviewers used up to five times more unspecific suggestive utterances when dolls were used, for instance through repeatedly asking the child to show “what really happened” with the dolls. Conclusion: The results indicate that CSA interviews in Finland are not conducted in a manner that follows best practice as defined by the research community and as stated in a number of guidelines. When comparing these questioning strategies with the recommendations, which have been predominant in the field for more than ten years now, it can be concluded that the interviews analysed were conducted in a manner that undermines the possibility to elicit an uncontaminated and accurate narrative from the children. A particularly worrying finding was the fact that interviewers did not follow up relevant information by the children in an adequate way. A number of clinical implications can be drawn from the results, particularly concerning the need for improvement in the quality of CSA interviews. There is convincing research regarding how to improve CSA interviews, notably through training forensic child interviewers to use a structured interviewing protocol, and providing them with continuous supervision and feedback. Allocating appropriate resources to improve the quality of forensic child interviews is a matter of protecting the rights of all persons involved in CSA investigations, in particular those of the children.

Evaluation of Bubble Formation and Break Up in Suppression Pools by Using Pattern Recognition Methods

During a possible loss of coolant accident in BWRs, a large amount of steam will be released from the reactor pressure vessel to the suppression pool. Steam will be condensed into the suppression pool causing dynamic and structural loads to the pool. The formation and break up of bubbles can be measured by visual observation using a suitable pattern recognition algorithm. The aim of this study was to improve the preliminary pattern recognition algorithm, developed by Vesa Tanskanen in his doctoral dissertation, by using MATLAB. Video material from the PPOOLEX test facility, recorded during thermal stratification and mixing experiments, was used as a reference in the development of the algorithm. The developed algorithm consists of two parts: the pattern recognition of the bubbles and the analysis of recognized bubble images. The bubble recognition works well, but some errors will appear due to the complex structure of the pool. The results of the image analysis were reasonable. The volume and the surface area of the bubbles were not evaluated. Chugging frequencies calculated by using FFT fitted well into the results of oscillation frequencies measured in the experiments. The pattern recognition algorithm works in the conditions it is designed for. If the measurement configuration will be changed, some modifications have to be done. Numerous improvements are proposed for the future 3D equipment.

Kuormanohjauksen vaikutus kaksion sähkönkulutuskäyrään

Tutkimuksen tarkoituksena oli selvittää millainen kaksion sähkönkulutuskäyrä on ja mistä kuormista se koostuu. Tarkoituksena oli myös tutkia miten kuormansiirrot vaikuttavat sähkönkulutuskäyrään ja onko kuormansiirroissa säästöpotentiaalia ajatellen asiakkaan sähkökustannuksia. Säästöpotentiaalia laskettaessa oletettiin, että asiakkaalla on sähkösopimus, jonka hinta seuraa sähköpörssin (Nord Pool) spot-hintoja. Tutkimustuloksista nähdään, että asunnon pohjakuorma aiheutuu kylmälaitteista ja suuret sähkön kulutuspiikit aiheutuvat liedestä, astianpesukoneesta ja pyykinpesukoneesta. Kuormansiirtojen vaikutus normaaliin sähkönkulutus käyrään on se, että suurten kuormien aiheuttamat kulutuspiikit siirtyivät myöhemmäksi iltaan. Laskelmissa selvisi, että kuormansiirto ei tuo asiakkaalle merkittäviä säästöjä, koska säästöjen saanti edellyttäisi pidempiä mittausjaksoja sekä päivittäisiä suuria hinnanvaihteluita sähkön spot-hinnoissa. Tutkittiin myös millaisia kylmälaitteiden kulutuskäyrät ovat ja miten pysäytykset ja uudelleenkäynnistyksen vaikuttavat niihin.

Lämpötilamuutosten aiheuttamien volyymi- ja hintapiikkien suojaaminen yhteispohjoismaisilla sähkömarkkinoilla

Säätilan muutokset ovat Pohjoismaissa iso riski niin yrityksille, kotitalouksille, kuin sähkön myyjille/tuottajille. Säätilan muutoksia ja niistä seuraavia kulutus- ja hintavaihteluita vastaan voidaan suojautua oikeanlaisella riskienhallintapolitiikalla sekä oikeanlaisilla suojausinstrumenteilla. Tässä työssä perehdytään case-yritys Lappeenrannan Energian riskienhallintaan sekä erityisesti talvikauden aikana ilmeneviin lämpötilan muutoksien aiheuttamiin hinta- ja kulutuspiikkeihin. Työssä käydään läpi eri vaihtoehtoja, joilla suojausta ja riskienhallintaa voisi parantaa ja mitkä johdannaiset soveltuvat riskienhallinnan tueksi. Työssä havaitaan, että riskienhallinnan tukena on syytä käyttää johdannaisia mahdollisimman monipuolisesti, jolloin liiketoiminnan kassavirrat pysyvät tasapainossa ja nouseva kulutus- ja hintakäyrä voidaan ”valjastaa”. Pörssijohdannaiset eivät pelkästään ratkaise suojausongelmaa, sillä niiden suojausteho on rajallinen, eivätkä ne sovellu yksinään kyseisiltä riskeiltä suojautumiseen. Pörssijohdannaisten lisäksi on syytä käyttää räätälöityjä tuotteita, jotta suojauksesta saataisiin mahdollisimman kattava.

Internationalization of small and medium-sized enterprises and impact of institutions on international entrepreneurship in emerging economies: the case of Russia

The doctoral study presents a comprehensive analysis of the impact of the institutional environment on the internationalization-based growth strategic choices of small and mediumsized enterprises (SMEs) in emerging economies. In responding to the calls for more research on institutions and international entrepreneurship, this dissertation extends the linkages between the two to the context of emerging economies. The study presents a comprehensive analysis of institutional challenges and their impact on the internationalization of SMEs in emerging economies, particularly in Russia. The research contributes to the adoption of the institution-based view in international entrepreneurship. The dissertation is presented through five research papers. Based on primary and secondary data, the study categorizes the possible sources of institutional influences on internationalization and empirically tests their impact by applying a method triangulation research design. The result of the conducted research is a proposed theoretical model of the institutional impact on the internationalization of SMEs in emerging economies. The model is specifically focused on the growth stage of the entrepreneurial process and considers only its internationalization facet. The research identifies and provides empirical support for the existence of a positive influence of a transparent and supportive regulatory environment, an institutionalized pool of general business knowledge, and collectivistic value orientation on the proclivity of SMEs to internationalize. A level of appreciation of entrepreneurial initiatives in home country and a greater positive institutional gap provide a positive impact on the international performance of SMEs. The research provides contextualized knowledge of the institutional impact on the internationalization of SMEs in Russia. The obtained results present theoretical value in terms of showing how the environmental conditions effect the entrepreneurial internationalization-based growth in emerging economies, providing the methodological insights into the measurement of the institutional effects, and empirically contextualizing the linkage between institutions and internationalization in the Russian business environment. The research also provides value for the business and policy making stakeholders by identifying ways of utilizing the conditions in the external institutional environment.

Price spike forecasting in a competitive day-ahead energy market

Electricity price forecasting has become an important area of research in the aftermath of the worldwide deregulation of the power industry that launched competitive electricity markets now embracing all market participants including generation and retail companies, transmission network providers, and market managers. Based on the needs of the market, a variety of approaches forecasting day-ahead electricity prices have been proposed over the last decades. However, most of the existing approaches are reasonably effective for normal range prices but disregard price spike events, which are caused by a number of complex factors and occur during periods of market stress. In the early research, price spikes were truncated before application of the forecasting model to reduce the influence of such observations on the estimation of the model parameters; otherwise, a very large forecast error would be generated on price spike occasions. Electricity price spikes, however, are significant for energy market participants to stay competitive in a market. Accurate price spike forecasting is important for generation companies to strategically bid into the market and to optimally manage their assets; for retailer companies, since they cannot pass the spikes onto final customers, and finally, for market managers to provide better management and planning for the energy market. This doctoral thesis aims at deriving a methodology able to accurately predict not only the day-ahead electricity prices within the normal range but also the price spikes. The Finnish day-ahead energy market of Nord Pool Spot is selected as the case market, and its structure is studied in detail. It is almost universally agreed in the forecasting literature that no single method is best in every situation. Since the real-world problems are often complex in nature, no single model is able to capture different patterns equally well. Therefore, a hybrid methodology that enhances the modeling capabilities appears to be a possibly productive strategy for practical use when electricity prices are predicted. The price forecasting methodology is proposed through a hybrid model applied to the price forecasting in the Finnish day-ahead energy market. The iterative search procedure employed within the methodology is developed to tune the model parameters and select the optimal input set of the explanatory variables. The numerical studies show that the proposed methodology has more accurate behavior than all other examined methods most recently applied to case studies of energy markets in different countries. The obtained results can be considered as providing extensive and useful information for participants of the day-ahead energy market, who have limited and uncertain information for price prediction to set up an optimal short-term operation portfolio. Although the focus of this work is primarily on the Finnish price area of Nord Pool Spot, given the result of this work, it is very likely that the same methodology will give good results when forecasting the prices on energy markets of other countries.

OL1/OL2-suojarakennuksen jäähdytteenmenetysonnettomuusanalyysit APROS 5.09 -ohjelmistolla

Tässä työssä on tutkittu OL1/OL2-suojarakennuksen käyttäytymistä jäähdytteenmenetysonnettomuuden eli LOCA:n aikana. Onnettomuuden simulointiin on kehitetty suojarakennusmalli suomalaiseen APROS 5.09 - ohjelmistoon sisältyvällä LP-koodilla (Lumped Parameter Code). Työssä on keskitytty suojarakennuksen kannalta oleellisimpien suureiden: kaasutilavuuksien paineen sekä lämpötilan ja lauhdutusaltaan lämpötilan ja pinnankorkeuden ajalliseen käyttäytymiseen. Mallinnetut LOCA:t ovat päähöyrylinjan ja sammutetun reaktorin jäähdytysjärjestelmän putkikatkoksia. Simulointeja on tehty laitoksen täyden tehon ja kuumavalmiuden lähtötiloissa ja tarkasteltavien suureiden käyttäytymistä on tutkittu erikseen valituilla konservatiivisilla oletuksilla. Laskentatapaukset rajoittuvat lyhyeen aikaväliin 27.78 tuntia kuvitellusta putkirikosta eteenpäin. Tuloksia on verrattu OL1/OL2- laitostoimittajan, Westinghouse Electric Sweden AB:n, tekemiin lisensiointianalyyseihin. Työssä on myös kuvattu APROS-laskennan epävarmuustekijöitä. Suojarakennuksen on todettu käyttäytyvän fysikaalisesti yhtenevästi lisensiointianalyyseissä ja APROS:lla tehdyissä vertailulaskuissa.

Lean Duplex -terästen hitsaus

Viime vuosien aikana tapahtunut nikkelin hinnan nouseminen on vaikuttanut austeniittis-ferriittisten ruostumattomien terästen, ns. duplex -terästen kehittämiseen. Niukkaseosteisemmissa lean duplex -teräksissä seostetun nikkelin määrää on vähennetty ja sitä on korvattu typellä ja mangaanilla. Nämä muutokset ko. terästen seostuksessa aiheuttavat haasteita hitsaukselle, erityisesti austeniitti-ferriitti -suhteen säilyttämisessä, sekä sitä kautta iskusitkeyden ja korroosio-ominaisuuksien säilyttämiselle. Suurempi typen osuus myös lisää teräksen hitsisulan viskositeettia, mikä heikentää juuripalkojen hitsauksessa tunkeumaa. Tässsä diplomityössä on tutkittu keinoja helpottaa paksujen (yli 20 mm) lean duplex -teräslevyjen hitsausta käytännön näkökulmasta, sekä parantaa hitsattujen levyjen iskusitkeyttä. Hitsauskokeilla löydettiin hitsausta helpottavia menetelmiä ja kokeista saatiin karsimalla valikoitua hitsausarvot, joilla pystytään hitsaamaan painelaitedirektiivin mukaisesti hyväksyttäviä hitsejä lean duplex -laatuihin LDX2101 ja UR2202.

Ydinvoimalaitosten vesikemia ja korroosionesto

Ydinvoimalaitosten vesikemian optimointi ja korroosionesto on välttämätöntä laitosten taloudellisen ja turvallisen käytön kannalta. Eri laitoksiin liittyvää vesikemiaa ja järjestelmissä havaittavia korroosion muotoja on tutkittu laajasti ja tutkitaan yhä edelleen. Monien prosessien ymmärtäminen vaatii usean eri tieteenalan osaamista, kuten kemiantekniikan, energiatekniikan sekä materiaalitekniikan. Tässä työssä kerrotaan yksinkertaistaen vesikemiaan ja korroosioon liittyviä prosesseja ja reaktioita. Työssä käsitellään kevytvettä jäähdytteenä sekä moderaattorina käyttävien ydinvoimalaitosten eri korroosiomuotoja sekä säteilyn vaikutusta näihin suoraan tai vesikemian kautta. Työssä kerrotaan korroosio- ja aktivoitumistuotteiden muodostumisesta ja kulkeutumisesta sekä näiden tuotteiden vaikutuksista laitosten toimintaan. Korroosion ja materiaalien aktivoitumisen pohjalta tarkastellaan kattavasti ydinvoimalaitosten tyypillisimpiä vesikemian muokkauskeinoja sekä korroosionhallintaa. Tärkeimpiin asioihin syvennytään hieman lähemmin. Tarkastelun kohteena ovat eniten käytetyt ydinvoimalaitokset, eli länsimaiset paine- ja kiehutusvesilaitokset sekä venäläisvalmisteiset VVER-laitokset. Tarkoituksena on ollut luoda tiivis tietopaketti opiskelijoiden käyttöön muun opintomateriaalin tueksi.

Prediction of market switching and delisting events from OMX First North Nordic multilateral stock exchange

This thesis studies the predictability of market switching and delisting events from OMX First North Nordic multilateral stock exchange by using financial statement information and market information from 2007 to 2012. This study was conducted by using a three stage process. In first stage relevant theoretical framework and initial variable pool were constructed. Then, explanatory analysis of the initial variable pool was done in order to further limit and identify relevant variables. The explanatory analysis was conducted by using self-organizing map methodology. In the third stage, the predictive modeling was carried out with random forests and support vector machine methodologies. It was found that the explanatory analysis was able to identify relevant variables. The results indicate that the market switching and delisting events can be predicted in some extent. The empirical results also support the usability of financial statement and market information in the prediction of market switching and delisting events.

Laser cladding with scanning optics

Scanning optics create different types of phenomena and limitation to cladding process compared to cladding with static optics. This work concentrates on identifying and explaining the special features of laser cladding with scanning optics. Scanner optics changes cladding process energy input mechanics. Laser energy is introduced into the process through a relatively small laser spot which moves rapidly back and forth, distributing the energy to a relatively large area. The moving laser spot was noticed to cause dynamic movement in the melt pool. Due to different energy input mechanism scanner optic can make cladding process unstable if parameter selection is not done carefully. Especially laser beam intensity and scanning frequency have significant role in the process stability. The laser beam scanning frequency determines how long the laser beam affects with specific place local specific energy input. It was determined that if the scanning frequency in too low, under 40 Hz, scanned beam can start to vaporize material. The intensity in turn determines on how large package this energy is brought and if the intensity of the laser beam was too high, over 191 kW/cm2, laser beam started to vaporize material. If there was vapor formation noticed in the melt pool, the process starts to resample more laser alloying due to deep penetration of laser beam in to the substrate. Scanner optics enables more flexibility to the process than static optics. The numerical adjustment of scanning amplitude enables clad bead width adjustment. In turn scanner power modulation (where laser power is adjusted according to where the scanner is pointing) enables modification of clad bead cross-section geometry when laser power can be adjusted locally and thus affect how much laser beam melts material in each sector. Power modulation is also an important factor in terms of process stability. When a linear scanner is used, oscillating the scanning mirror causes a dwell time in scanning amplitude border area, where the scanning mirror changes the direction of movement. This can cause excessive energy input to this area which in turn can cause vaporization and process instability. This process instability can be avoided by decreasing energy in this region by power modulation. Powder feeding parameters have a significant role in terms of process stability. It was determined that with certain powder feeding parameter combinations powder cloud behavior became unstable, due to the vaporizing powder material in powder cloud. Mainly this was noticed, when either or both the scanning frequency or powder feeding gas flow was low or steep powder feeding angle was used. When powder material vaporization occurred, it created vapor flow, which prevented powder material to reach the melt pool and thus dilution increased. Also powder material vaporization was noticed to produce emission of light at wavelength range of visible light. This emission intensity was noticed to be correlated with the amount of vaporization in the powder cloud.

Hitsauslankojen kallistuskulmien vaikutus hitsausliitoksen ominaisuuksiin S355-rakenneteräksen tandem-MAG-pienahitsauksessa

Tämä kandidaatintyö on tutkimus hitsauslankojen kallistuskulmien vaikutuksesta hitsausliitoksen ominaisuuksiin tandem-MAG-pienahitsauksessa S355-rakenneteräkselle. Kokeellinen osuus suoritettiin Lappeenrannan teknillisen yliopiston hitsaustekniikan laboratoriossa jatkotutkimuksena Binbin Yanin diplomityölle ”Influence of wire configurations of welding S355 structural steel with tandem GMAW”. Tutkimuksen tavoitteena on määrittää tandem-MAG-hitsauksessa käytettyjen hitsauslankojen kallistuskulmien vaikutus hitsausliitoksen ominaisuuksiin. Teoriaosuuden tavoitteena on selvittää myös muiden hitsausparametrien vaikutus hitsausliitoksen ominaisuuksiin sekä perehtyä hitsisulan käyttäytymiseen terästen tandem-MAG-hitsauksessa.

Prosessiautomaatio pinnankorkeusmittauksen koelaitteistoissa

Pinnankorkeuden tunteminen kiehutusvesireaktorin painesäiliössä on erittäin tärkeää sen turvallisuusvaikutusten takia. Pinnankorkeutta mitataan vesipatsaiden korkeutta havaitsevien paine-eromittausten avulla. Säteilyturvakeskuksen YVL-ohjeiden mukaan turvallisuuteen vaikuttavien mittausten täytyy noudattaa moninkertaistus- ja erilaisuusperiaatteita. Yleensä erilaisuusperiaatetta on toteutettu käyttämällä erityyppisiä paine-eromittareita, mutta erilaisella fysikaalisella toimintaperiaatteella oleva mittaus olisi parempi ja toteuttaisi paremmin erilaisuusperiaatetta. Uimurikytkin olisi tällainen fysikaalisesti eri periaatteeseen perustuva pinnankorkeuden mittauslaite. Ydinvoimalaan tarkoitettu teknologia tulee kelpoistaa riippumattoman tahon toimesta ennen käyttöönottoa. Kelpoistamiskokeita varten Lappeenrannan teknillisen yliopiston Ydinturvallisuuden tutkimusyksikköön rakennettiin vuosina 2011–2013 kaksi koelaitteistoa. Näillä koelaitteistoilla tutkittiin uimurikytkimien toimintaa ja ominaisuuksia erilaisissa kiehutusvesireaktorin käyttötilanteissa. Koelaitteistot tarvitsivat toimiakseen automaatiojärjestelmät, jotka suunniteltiin pääosin noudattamalla suunnittelun elinkaarimallia sekä automaatiosuunnittelun sisältökokonaisuuksia. Automaatiojärjestelmien suunnittelu aloitettiin määrittelemällä koejärjestelyjen asettamat vaatimukset, jonka jälkeen tehtiin teknologiavalinnat. Seuraavaksi suunniteltiin automaatiojärjestelmien logiikkaohjelmistot, joiden kuvaukseen tämä työ pääasiassa keskittyy. Logiikkaohjelmistot toteutettiin graafisella National Instruments LabView -ohjelmointikielellä. Logiikkaohjelmistojen tuli hoitaa tiedonkeruuta, käyttöautomaatiota, turvallisuustehtäviä sekä kokeisiin liittyviä erikoistehtäviä. Ohjelmistot saatiin esikokeiden aikana toimimaan halutusti, ja varsinaiset kokeet voitiin suorittaa ilman merkittäviä ongelmia.

Value Creation in Crowd-Business: Developing a Framework for Successful Implementation of Crowdsourcing Initiatives

By recent years the phenomenon called crowdsourcing has been acknowledged as an innovative form of value creation that must be taken seriously. Crowdsourcing can be defined as an act of outsourcing tasks originally performed inside an organization, or assigned externally in form of a business relationship, to an undefinably large, heterogeneous mass of potential actors. This thesis constructs a framework for successful implementation of crowdsourcing initiatives. Firms that rely entirely on their own research and ideas cannot compete with the innovative capacity that crowd-powered firms have. Nowadays, crowdsourcing has become one of the key capabilities of businesses due to its innovative capabilities, in addition to the existing internal resources of the firm. By utilizing crowdsourcing the business gains access to an enormous pool of competence and knowledge. However, various risks remain such as uncertainty of crowd structure and loss of internal know-how. Crowdsourcing Success Framework introduces a step by step model for implementing crowdsourcing into the everyday operations of the business. It starts from the decision to utilize crowdsourcing and continues further into planning, organizing and execution. Finally, this thesis presents the success factors of crowdsourcing initiative.