Implementation of educational change in Finland: The case of the undivided basic education reform

For the past decades, educational large-scale reforms have been elaborated and implemented in many countries and often resulted in partial or complete failure. These results brought researchers to study policy processes in order to address this particular challenge. Studies on implementation processes brought to light an existing causal relationship between the implementation process and the effectiveness of a reform. This study aims to describe the implementation process of educational change in Finland, who produced efficient educational reforms over the last 50 years. The case study used for the purpose of this study is the national reform of undivided basic education (yhtenäinen peruskoulu) implemented in the end of the 1990s. Therefore, this research aims to describe how the Finnish undivided basic education reform was implemented. This research was carried out using a pluralist and structuralist approach of policy process and was analyzed according to the hybrid model of implementation process. The data were collected using a triangulation of methods, i.e. documentary research, interviews and questionnaires. The data were qualitative and were analyzed using content analysis methods. This study concludes that the undivided basic education reform was applied in a very decentralized manner, which is a reflection of the decentralized system present in Finland. Central authorities provided a clear vision of the purpose of the reform, but did not control the implementation process. They rather provided extensive support in the form of transmission of information and development of collaborative networks. Local authorities had complete autonomy in terms of decision-making and implementation process. Discussions, debates and decisions regarding implementation processes took place at the local level and included the participation of all actors present on the field. Implementation methods differ from a region to another, with is the consequence of the variation of the level of commitment of local actors but also the diversity of local realities. The reform was implemented according to existing structures and values, which means that it was in cohesion with the context in which it was implemented. These results cannot be generalized to all implementation processes of educational change in Finland but give a great insight of what could be the model used in Finland. Future studies could intent to confirm the model described here by studying other reforms that took place in Finland.

Monitoring Directed Energy Deposition Processes in Additive Manufacturing

The purpose of this study is to find out how laser based Directed Energy Deposition processes can benefit from different types of monitoring. DED is a type of additive manufacturing process, where parts are manufactured in layers by using metallic powder or metallic wire. DED processes can be used to manufacture parts that are not possible to manufacture with conventional manufacturing processes, when adding new geometries to existing parts or when wanting to minimize the scrap material that would result from machining the part. The aim of this study is to find out why laser based DED-processes are monitored, how they are monitored and what devices are used for monitoring. This study has been done in the form of a literature review. During the manufacturing process, the DED-process is highly sensitive to different disturbances such as fluctuations in laser absorption, powder feed rate, temperature, humidity or the reflectivity of the melt pool. These fluctuations can cause fluctuations in the size of the melt pool or its temperature. The variations in the size of the melt pool have an effect on the thickness of individual layers, which have a direct impact on the final surface quality and dimensional accuracy of the parts. By collecting data from these fluctuations and adjusting the laser power in real-time, the size of the melt pool and its temperature can be kept within a specified range that leads to significant improvements in the manufacturing quality. The main areas of monitoring can be divided into the monitoring of the powder feed rate, the temperature of the melt pool, the height of the melt pool and the geometry of the melt pool. Monitoring the powder feed rate is important when depositing different material compositions. Monitoring the temperature of the melt pool can give information about the microstructure and mechanical properties of the part. Monitoring the height and the geometry of the melt pool is an important factor in achieving the desired dimensional accuracy of the part. By combining multiple different monitoring devices, the amount of fluctuations that can be controlled will be increased. In addition, by combining additive manufacturing with machining, the benefits of both processes could be utilized.

The role of import intermediary companies in the Russian imports from the EU A case study of a Russian industrial company’s point of view on import intermediaries

The literature on agency suggests different implications for the use of export intermediaries. However, only few studies provide a view on import intermediaries. This thesis tries for its part to fill this research gap by studying the import intermediaries in the EU–Russia trade from a Russian industrial company’s point of view. The aim is to describe import intermediation and explain the need for import intermediary companies in the EU–Russia trade. The theoretical framework of this thesis originates from an article by Peng and York (2001), in which they study the performance of export intermediaries. This thesis applies resource-based theory, transaction cost theory and agency cost theory, following the idea of Peng and York. The resource-based theory approach is utilised for describing an ideal import intermediary company, and transaction cost theory provides a basis for understanding the benefits of using the services of import intermediary companies, while agency cost theory is applied in order to understand the risks the Russian industrial company faces when it decides to use the services of import intermediaries. The study is performed in the form of a case interview with a representative of a major Russian metallurgy company. The results of the study suggest that an ideal intermediary has the skills required specifically for the imports process, in order to save time and money of the principal company. The intermediary company helps reducing the amount of time the managers and the staff of the principal company use to make imports possible, thus reducing the salary costs and providing the possibility to concentrate on the company’s core competencies. The benefits of using the services of import intermediary companies are the reduced transaction costs, especially salary costs that are minimised because of the effectiveness and specialisation of import intermediaries. Intermediaries are specialised in the imports process and thus need less time and resources to organise the imports. They also help to reduce the fixed salary costs, because their services can be used only when needed. The risks of being misled by intermediaries are minimised by the competition on the import intermediary market. In case an intermediary attempts fraud, it gets replaced by its rival.

Fostering product innovation by learning through exporting in Eastern Europe

This study discusses the importance of learning through the process of exporting, and more specifically how such a process can enhance the product innovativeness of a company. The purpose of this study is to investigate the appropriate sources of learning and to suggest an interactive framework for how new knowledge from exporting markets can materialize itself into product innovation. The theoretical background of the study was constructed from academic literature, which is related to concepts of learning by exporting, along with sources for learning in the market and new product development. The empirical research in the form of a qualitative case study was based on four semi-structured interviews and secondary data from the case company official site. The interview data was collected between March and April 2015 from case company employees who directly work in the department of exporting and product development. The method of thematic analysis was used to categorize and interpret the collected data. What was conclusively discovered, was that the knowledge from an exporting market can be an incentive for product innovation, especially an incremental one. Foreign customers and competitors as important sources for new knowledge contribute to the innovative process. Foreign market competitors’ influence on product improvements was high only when the competitor was a market leader or held a colossal market share, while the customers’ influence is always high. Therefore, involving a foreign customer in the development of a new product is vital to a company that is interested in benefiting from what is learned through exporting. The interactive framework, which is based on the theoretical background and findings of the study, suggests that exporting companies can raise their product innovativeness by utilizing newly gained knowledge from exporting markets. Except for input, in the form of sources of learning, and product innovation as an output, the framework contains a process of knowledge transfer, the absorptive capacity of a firm and a new product development process. In addition, the framework and the findings enhance the understanding of the disputed relationship between an exporting experience and product innovation. However, future research is needed in order to fully understand all the elements of the framework, such as the absorptive capacity of a firm as well as more case companies to be processed in order to increase the generalization of the framework

Pricing of Liquidity Risks in London Stock Exchange

This thesis aims to investigate pricing of liquidity risks in London Stock Exchange. Liquidity Adjusted Capital Asset Pricing Model i.e. LCAPM developed by Acharya and Pedersen (2005) is being applied to test the influence of various liquidity risks on stock returns in London Stock Exchange. The Liquidity Adjusted Capital Asset Pricing model provides a unified framework for the testing of liquidity risks. All the common stocks listed and delisted for the period of 2000 to 2014 are included in the data sample. The study has incorporated three different measures of liquidity – Percent Quoted Spread, Amihud (2002) and Turnover. The reason behind the application of three different liquidity measures is the multi-dimensional nature of liquidity. Firm fixed effects panel regression is applied for the estimation of LCAPM. However, the results are robust according to Fama-Macbeth regressions. The results of the study indicates that liquidity risks in the form of (i) level of liquidity, (ii) commonality in liquidity (iii) flight to liquidity, (iv) depressed wealth effect and market return as well as aggregate liquidity risk are priced at London Stock Exchange. However, the results are sensitive to the choice of liquidity measures.

Viability of part cargoes in tramp shipping company’s routing and scheduling decisions

Operational excellence of individual tramp shipping companies is important in today’s market, where competition is intense, freight revenues are modest and capital costs high due to global financial crisis, and tighter regulatory framework is generating additional costs and challenges to the industry. This thesis concentrates on tramp shipping, where a tramp operator in a form of an individual case company, specialized in short-sea shipping activities in the Baltic Sea region, is searching ways to map their current fleet operations and better understand potential ways to improve the overall routing and scheduling decisions. The research problem is related to tramp fleet planning where several cargoes are carried on board at the same time, which are here systematically referred to as part cargoes. The purpose is to determine the pivotal dimensions and characteristics of these part cargo operations in tramp shipping, and offer both the individual case company and wider research community better understanding of potential risks and benefits related to utilization of part cargo operations. A mixed method research approach is utilized in this research, as the objectives are related to complex, real-life business practices in the field of supply chain management and more specifically, maritime logistics. A quantitative analysis of different voyage scenarios is executed, including alternative voyage legs with varying cost structure and customer involvement. An on-line-based questionnaire designed and prepared by case company’s decision group again provides desired data of predominant attitudes and views of most important industrial customers regarding the part cargo-related operations and potential future utilization of this business model. The results gained from these quantitative methods are complied with qualitative data collection tools, along with suitable secondary data sources. Based on results and logical analysis of different data sources, a framework for characterizing the different aspects of part cargo operations is developed, utilizing both existing research and empirical investigation of the phenomenon. As conclusions, part cargoes have the ability to be part of viable fleet operations, and even increase flexibility among the fleet to a certain extent. Naturally, several hinderers for this development is recognized as well, such as potential issues with information gathering and sharing, inefficient port activities, and increased transit times.

The role of public export promotion in Finland Industry view of public export promotion in Southwest Finland

The role of the public export promotion in Finland needed more research. The part of the public sector export promotion in the overall export is significant. In an ever more global world not only the companies but also the counties compete against each other and the governments have an interest to boost their economy as much as they are able to. Every industrialized country has export promotion services in some form or another. In the 21st century the tendency has been the bundling of the services and this has also been done in Finland with Team Finland. The role and the efficiency of the services provided deserve more research. The research question of this study is: What is the role of the public export promotion services in Finland? The question is researched primary by expert interviews conducted for this study. The situation in Southwest Finland is studied from the viewpoint of the companies of the region by conducting a survey aimed to the successfully internationalized companies of the region and asking them on their views on the impact and role of public export services in their internationalization. The theory base is formed out of various export promotion studies, studies monitoring the effects of the promotion and theories of the internationalization process of companies. The primary material for the study are the three expert interviews conducted and the answers to the survey conducted. The research method in the first part is a constructive qualitative research. The research approach in the second part, where the views of the companies in Southwest Finland are studied, is quantitative. The study findings from the expert interviews: the aligning of the public export promotion done in Finland to the previous research and the addition of the role of the public sector in classical frameworks. The study findings from the survey: the utilizing of the public export promotion services is heavily delayed and the internationalizing companies start to utilize the services very late in their internationalization process, the average being 10,3 years from the beginning of the internationalization. Another central finding from the survey is that the successfully internationalized companies see the public export promotion services generally as highly beneficial but in the light of the answers the effect on their own company is not as significant. Concluding can be stated that the public export promotion is seen as beneficial, but the monitoring of the efficiency is complicated in the case of services. Getting the companies to start utilizing the services earlier in their internationalization needs attention from the service providers. By communicating the achieved results and benefits better to the potential users of the services the internationalization process of the companies could be accelerated