Apply of energy storages in electricity distribution networks and reserve capacity applications

The Thesis is dedicated to development of an operative tool to support decision making of battery energy storages implementation in distribution networks. The basics of various battery technologies, their perspectives and challenges are represented in the Thesis. Mathematical equations that describe economic effect from battery energy storage installation are offered. The main factors that influence profitability of battery settings have been explored and mathematically defined. Mathematical model and principal trends of battery storage profitability under an impact of the major factors are determined. The meaning of annual net value was introduced to show the difference between savings and required costs. The model gives a clear vision for dependencies between annual net value and main factors. Proposals for optimal network and battery characteristics are suggested.

Modelling Cutting States in Rough Turning of 34CrNiMo6 Steel

Rough turning is an important form of manufacturing cylinder-symmetric parts. Thus far, increasing the level of automation in rough turning has included process monitoring methods or adaptive turning control methods that aim to keep the process conditions constant. However, in order to improve process safety, quality and efficiency, an adaptive turning control should be transformed into an intelligent machining system optimizing cutting values to match process conditions or to actively seek to improve process conditions. In this study, primary and secondary chatter and chip formation are studied to understand how to measure the effect of these phenomena to the process conditions and how to avoid undesired cutting conditions. The concept of cutting state is used to address the combination of these phenomena and the current use of the power capacity of the lathe. The measures to the phenomena are not developed based on physical measures, but instead, the severity of the measures is modelled against expert opinion. Based on the concept of cutting state, an expert system style fuzzy control system capable of optimizing the cutting process was created. Important aspects of the system include the capability to adapt to several cutting phenomena appearing at once, even if the said phenomena would potentially require conflicting control action.

Cross-border transmission capacity development – Experiences from the Nordic electricity markets

The liberalisation of the wholesale electricity markets has been considered an efficient way to organise the markets. In Europe, the target is to liberalise and integrate the common European electricity markets. However, insufficient transmission capacity between the market areas hampers the integration, and therefore, new investments are required. Again, massive transmission capacity investments are not usually easy to carry through. This doctoral dissertation aims at elaborating on critical determinants required to deliver the necessary transmission capacity investments. The Nordic electricity market is used as an illustrative example. This study suggests that changes in the governance structure have affected the delivery of Nordic cross-border investments. In addition, the impacts of not fully delivered investments are studied in this doctoral dissertation. An insufficient transmission network can degrade the market uniformity and may also cause a need to split the market into smaller submarkets. This may have financial impacts on market actors when the targeted efficient sharing of resources is not met and even encourage gaming. The research methods applied in this doctoral dissertation are mainly empirical ranging from a Delphi study to case studies and numerical calculations.

FUTURES OF FINNISH FOOD SYSTEM BY 2050. The perspective of resilience

Modern food systems face complex global challenges such as climate change, resource scarcities, population growth, concentration and globalization. It is not possible to forecast how all these challenges will affect food systems, but futures research methods provide possibilities to enable better understanding of possible futures and that way increases futures awareness. In this thesis, the two-round online Delphi method was utilized to research experts’ opinions about the present and the future resilience of the Finnish food system up to 2050. The first round questionnaire was constructed based on the resilience indicators developed for agroecosystems. Sub-systems in the study were primary production (main focus), food industry, retail and consumption. Based on the results from the first round, the future images were constructed for primary production and food industry sub-sections. The second round asked experts’ opinion about the future images’ probability and desirability. In addition, panarchy scenarios were constructed by using the adaptive cycle and panarchy frameworks. Furthermore, a new approach to general resilience indicators was developed combining “categories” of the social ecological systems (structure, behaviors and governance) and general resilience parameters (tightness of feedbacks, modularity, diversity, the amount of change a system can withstand, capacity of learning and self- organizing behavior). The results indicate that there are strengths in the Finnish food system for building resilience. According to experts organic farms and larger farms are perceived as socially self-organized, which can promote innovations and new experimentations for adaptation to changing circumstances. In addition, organic farms are currently seen as the most ecologically self-regulated farms. There are also weaknesses in the Finnish food system restricting resilience building. It is important to reach optimal redundancy, in which efficiency and resilience are in balance. In the whole food system, retail sector will probably face the most dramatic changes in the future, especially, when panarchy scenarios and the future images are reflected. The profitability of farms is and will be a critical cornerstone of the overall resilience in primary production. All in all, the food system experts have very positive views concerning the resilience development of the Finnish food system in the future. Sometimes small and local is beautiful, sometimes large and international is more resilient. However, when probabilities and desirability of the future images were questioned, there were significant deviations. It appears that experts do not always believe desirable futures to materialize.

Impacts of capacity remunerative mechanisms on cross-border trade

The European ambitious targets to increase the share of renewable generation pose a challenge to the generation adequacy. Many European member states are concerned that energy-only markets alone might not be able to deliver sufficient capacity required to meet the future electricity demand and back up shortfalls of energy from renewable energy sources (RES) during periods of low wind and sun. Many EU members consider to re-design their energy-only markets and establish different forms of capacity remunerative mechanisms (CRMs) to maintain the security of supply. There is a certain concern that market design changes at the level of EU member countries might conflict with the European goal of a single market. As soon as many European markets are highly interconnected, uncoordinated CRMs might create negative crossborder effects and hinder the achievement of the Internal Electricity Market in Europe. The pros and cons of capacity markets are well examined at the national level. However, the cross-border effects of capacity markets within the European market aiming at higher integration have received less attention. This doctoral dissertation examines the cross-border effects of unilateral implementation of CRMs applying both theoretical and case study analyses. The results show that capacity remunerative mechanisms (CRMs) may cause negative cross-border effects, especially if they are implemented unilaterally.

FUTURES OF FINNISH FOOD SYSTEM BY 2050. The perspective of resilience

Modern food systems face complex global challenges such as climate change, resource scarcities, population growth, concentration and globalization. It is not possible to forecast how all these challenges will affect food systems, but futures research methods provide possibilities to enable better understanding of possible futures and that way increases futures awareness. In this thesis, the two-round online Delphi method was utilized to research experts’ opinions about the present and the future resilience of the Finnish food system up to 2050. The first round questionnaire was constructed based on the resilience indicators developed for agroecosystems. Sub-systems in the study were primary production (main focus), food industry, retail and consumption. Based on the results from the first round, the future images were constructed for primary production and food industry sub-sections. The second round asked experts’ opinion about the future images’ probability and desirability. In addition, panarchy scenarios were constructed by using the adaptive cycle and panarchy frameworks. Furthermore, a new approach to general resilience indicators was developed combining “categories” of the social ecological systems (structure, behaviors and governance) and general resilience parameters (tightness of feedbacks, modularity, diversity, the amount of change a system can withstand, capacity of learning and self- organizing behavior). The results indicate that there are strengths in the Finnish food system for building resilience. According to experts organic farms and larger farms are perceived as socially self-organized, which can promote innovations and new experimentations for adaptation to changing circumstances. In addition, organic farms are currently seen as the most ecologically self-regulated farms. There are also weaknesses in the Finnish food system restricting resilience building. It is important to reach optimal redundancy, in which efficiency and resilience are in balance. In the whole food system, retail sector will probably face the most dramatic changes in the future, especially, when panarchy scenarios and the future images are reflected. The profitability of farms is and will be a critical cornerstone of the overall resilience in primary production. All in all, the food system experts have very positive views concerning the resilience development of the Finnish food system in the future. Sometimes small and local is beautiful, sometimes large and international is more resilient. However, when probabilities and desirability of the future images were questioned, there were significant deviations. It appears that experts do not always believe desirable futures to materialize.

Optimization of PV and battery capacity for domestic purposes

The usage of PV batteries nowadays became more and more widely spread. Due to the fact that the efficiency of modern PV is rising every year the prevalence of this source of energy is increasing. As the source of the energy is sunlight, these batteries need to be complimented by storage capacitors which will store energy for future use. Nevertheless the less the calculation of demanded amount of energy according the load and capacity of a storage battery that will keep the end consumer in work during certain time still is not overviewed. In this thesis the overall system will be considered and there will be made economic calculations for configurations of such system that will depend from the load. Also the behavior of the system in different geographical and climate conditions that influence of the amount of energy produced will be overviewed.

Improve the production capacity: A case study of Eurofins Viljavuuspalvelu Oy

In any manufacturing system, there are many factors that are affecting and limiting the capacity of the entire system. This thesis addressed a study on how to improve the production capacity in a Finnish company (Viljavuuspalvelu Oy) through different methods like bottleneck analysis, Overall Equipment Effectiveness (OEE), and Just in Time production. Four analyzing methods have been studied in order to detect the bottleneck machine in Viljavuuspalvelu Oy. The results shows that the bottleneck machine in the industrial area that constraint the production is the grinding machine while the bottleneck machine in the laboratory section is the photometry machine. In addition, the Overall Equipment Effectiveness (OEE) of the entire system of the studied case was calculated and it has been found that the OEE of the Viljavuuspalvelu Oy is 35.75%. Moreover, two methods on how to increase the OEE were studied and it was shown that either the total output of the company should be 1254 samples/shift in order to have an OEE around 85% which is considered as a world class or the Ideal run rate should be 1.45 pieces/minute. In addition, some realistic methods are applied based on the finding in this thesis to increase the OEE factor in the company and in one realistic method the % OEE has increase to 62.59%. Finally, an explanation on how to implement the Just in Time production in Viljavuuspalvelu Oy has been studied.

Power and Performance Management Strategies on NoC-Based Multicore Platforms, Using DVFS, Adaptive Algorithm and Task Parallelism

This work presents synopsis of efficient strategies used in power managements for achieving the most economical power and energy consumption in multicore systems, FPGA and NoC Platforms. In this work, a practical approach was taken, in an effort to validate the significance of the proposed Adaptive Power Management Algorithm (APMA), proposed for system developed, for this thesis project. This system comprise arithmetic and logic unit, up and down counters, adder, state machine and multiplexer. The essence of carrying this project firstly, is to develop a system that will be used for this power management project. Secondly, to perform area and power synopsis of the system on these various scalable technology platforms, UMC 90nm nanotechnology 1.2v, UMC 90nm nanotechnology 1.32v and UMC 0.18 μmNanotechnology 1.80v, in order to examine the difference in area and power consumption of the system on the platforms. Thirdly, to explore various strategies that can be used to reducing system’s power consumption and to propose an adaptive power management algorithm that can be used to reduce the power consumption of the system. The strategies introduced in this work comprise Dynamic Voltage Frequency Scaling (DVFS) and task parallelism. After the system development, it was run on FPGA board, basically NoC Platforms and on these various technology platforms UMC 90nm nanotechnology1.2v, UMC 90nm nanotechnology 1.32v and UMC180 nm nanotechnology 1.80v, the system synthesis was successfully accomplished, the simulated result analysis shows that the system meets all functional requirements, the power consumption and the area utilization were recorded and analyzed in chapter 7 of this work. This work extensively reviewed various strategies for managing power consumption which were quantitative research works by many researchers and companies, it's a mixture of study analysis and experimented lab works, it condensed and presents the whole basic concepts of power management strategy from quality technical papers.

Real-time adaptive control of ultra-fast laser scribing process with spectrometer online monitoring

There exist several researches and applications about laser welding monitoring and parameter control but not a single one have been created for controlling of laser scribing processes. Laser scribing is considered to be very fast and accurate process and thus it would be necessary to develop accurate turning and monitoring system for such a process. This research focuses on finding out whether it would be possible to develop real-time adaptive control for ultra-fast laser scribing processes utilizing spectrometer online monitoring. The thesis accurately presents how control code for laser parameter tuning is developed using National Instrument's LabVIEW and how spectrometer is being utilized in online monitoring. Results are based on behavior of the control code and accuracy of the spectrometer monitoring when scribing different steel materials. Finally control code success is being evaluated and possible development ideas for future are presented.