Simulation model of wind turbine gearbox and lubrication system

As increasing efficiency of a wind turbine gearbox, more power can be transferred from rotor blades to generator and less power is used to cause wear and heating in the gearbox. By using a simulation model, behavior of the gearbox can be studied before creating expensive prototypes. The objective of the thesis is to model a wind turbine gearbox and its lubrication system to study power losses and heat transfer inside the gearbox and to study the simulation methods of the used software. Software used to create the simulation model is Siemens LMS Imagine.Lab AMESim, which can be used to create one-dimensional mechatronic system simulation models from different fields of engineering. When combining components from different libraries it is possible to create a simulation model, which includes mechanical, thermal and hydraulic models of the gearbox. Results for mechanical, thermal, and hydraulic simulations are presented in the thesis. Due to the large scale of the wind turbine gearbox and the amount of power transmitted, power loss calculations from AMESim software are inaccurate and power losses are modelled as constant efficiency for each gear mesh. Starting values for simulation in thermal and hydraulic simulations were chosen from test measurements and from empirical study as compact and complex design of gearbox prevents accurate test measurements. In further studies to increase the accuracy of the simulation model, components used for power loss calculations needs to be modified and values for unknown variables are needed to be solved through accurate test measurements.

Impacts of increased levels of wind penetration on the Electric Power System of the Åland Islands

The application of VSC-HVDC technology throughout the world has turned out to be an efficient solution regarding a large share of wind power in different power systems. This technology enhances the overall reliability of the grid by utilization of the active and reactive power control schemes which allows to maintain frequency and voltage on busbars of the end-consumers at the required level stated by the network operator. This master’s thesis is focused on the existing and planned wind farms as well as electric power system of the Åland Islands. The goal is to analyze the wind conditions of the islands and appropriately predict a possible production of the existing and planned wind farms with a help of WAsP software program. Further, to investigate the influence of increased wind power it is necessary to develop a simulation model of the electric grid and VSC-HVDC system in PSCAD and examine grid response to different wind power production cases with respect to the grid code requirements and ensure the stability of the power system.

Experimentation on Wind Powered Hydraulic Heating System

It is common knowledge of the world’s dependency on fossil fuel for energy, its unsustainability on the long run and the changing trend towards renewable energy as an alternative energy source. This aims to cut down greenhouse gas emission and its impact on the rate of ecological and climatic change. Quite remarkably, wind energy has been one of many focus areas of renewable energy sources and has attracted lots of investment and technological advancement. The objective of this research is to explore wind energy and its application in household heating. This research aims at applying experimental approach in real time to study and verify a virtually simulated wind powered hydraulic house heating system. The hardware components comprise of an integrated hydraulic pump, flow control valve, hydraulic fluid and other hydraulic components. The system design and control applies hardware in-the-loop (HIL) simulation setup. Output signal from the semi-empirical turbine modelling controls the integrated motor to generate flow. Throttling the volume flow creates pressure drop across the valve and subsequently thermal power in the system to be outputted using a heat exchanger. Maximum thermal power is achieved by regulating valve orifice to achieve optimum system parameter. Savonius rotor is preferred for its low inertia, high starting torque and ease of design and maintenance characteristics, but lags in power efficiency. A prototype turbine design is used; with power output in range of practical Savonius turbine. The physical mechanism of the prototype turbine’s augmentation design is not known and will not be a focus in this study.

Hydrologisen tilanteen ja tuulivoimatuotannon muutosten vaikutus vesiarvoihin pohjoismaisilla sähkön spot-markkinoilla

Vesivoimalla on merkittävä rooli pohjoismaisessa sähköntuotantojärjestelmässä. Spot-markkinoille tarjottavan vesivoiman hinta riippuu vaihtoehtoisen tuotannon hinnasta ja odotetusta vesivoimantuottajien käytettävissä olevasta veteen sitoutuneen potentiaalienergian määrästä. Hydrologisella tilanteella tarkoitetaan tässä tämän potentiaalienergian poikkeamaa normaalitasostaan. Viime vuosina tuulivoimatuotanto pohjoismaisella sähkömarkkina-alueella on kasvanut voimakkaasti, ja on tullut aiheelliseksi tarkastella, millaisia vaikutuksia tällä on vesivoimantuottajien toimintaan. Työssä määritellään vesivoimalle vaihtoehtoisen sähköntuotannon tuotantokustannus, joka pitkällä aikavälillä toimii vertailutasona, jonka perusteella vesivoimantuottajat määrittävät markkinoilla tarjontahinnan tuotannolleen. Tarkastellaan, kuinka hydrologisen tilanteen ja vaihtoehtoisen tuotannon tuotantokustannusten muutokset vaikuttavat vesiarvoon, joka on hinta, jolla hintariippuvaista eli säätyvää vesivoimaa tarjotaan spot-markkinoille. Todetaan, että hydrologisen tilanteen vahvistuminen ja vaihtoehtoisen tuotantokustannuksen aleneminen alentavat vesiarvoja. Todetaan lisäksi, että tuulivoima vaikuttaa sähkön hinnanmuodostukseen markkinoilla samankaltaisesti kuin hintariippumaton vesivoimatuotanto. Esitetään aikasarjamalli vesivoimatuotannon hintariippuvuuden mallintamiseksi. Vertaillaan vesivoimatuottajien toimintaa kahdella vesivoimatuotantoa sisältävällä hinta-alueella, joista toisella tuulivoimatuotanto on kasvanut voimakkaammin kuin toisella. Havaitaan, että molemmilla hinta-alueilla hydrologisen tilanteen vahvistuminen on alentanut ja heikkeneminen nostanut vesiarvoja. Lisäksi havaitaan, että alueella, jonka tuulivoimatuotanto on kasvanut enemmän, vesiarvot ovat laskeneet suhteessa alueen, jolla tuulivoimatuotanto on kasvanut vähemmän, vesiarvoihin. Tuulivoiman voidaan todeta syrjäyttäneen markkinoilta tuotantokustannuksiltaan kalliimpaa tuotantoa.

GIS-based approach for optimization of onshore wind park infrastructure alignment in Finland

Wind power is a rapidly developing, low-emission form of energy production. In Fin-land, the official objective is to increase wind power capacity from the current 1 005 MW up to 3 500–4 000 MW by 2025. By the end of April 2015, the total capacity of all wind power project being planned in Finland had surpassed 11 000 MW. As the amount of projects in Finland is record high, an increasing amount of infrastructure is also being planned and constructed. Traditionally, these planning operations are conducted using manual and labor-intensive work methods that are prone to subjectivity. This study introduces a GIS-based methodology for determining optimal paths to sup-port the planning of onshore wind park infrastructure alignment in Nordanå-Lövböle wind park located on the island of Kemiönsaari in Southwest Finland. The presented methodology utilizes a least-cost path (LCP) algorithm for searching of optimal paths within a high resolution real-world terrain dataset derived from airborne lidar scannings. In addition, planning data is used to provide a realistic planning framework for the anal-ysis. In order to produce realistic results, the physiographic and planning datasets are standardized and weighted according to qualitative suitability assessments by utilizing methods and practices offered by multi-criteria evaluation (MCE). The results are pre-sented as scenarios to correspond various different planning objectives. Finally, the methodology is documented by using tools of Business Process Management (BPM). The results show that the presented methodology can be effectively used to search and identify extensive, 20 to 35 kilometers long networks of paths that correspond to certain optimization objectives in the study area. The utilization of high-resolution terrain data produces a more objective and more detailed path alignment plan. This study demon-strates that the presented methodology can be practically applied to support a wind power infrastructure alignment planning process. The six-phase structure of the method-ology allows straightforward incorporation of different optimization objectives. The methodology responds well to combining quantitative and qualitative data. Additional-ly, the careful documentation presents an example of how the methodology can be eval-uated and developed as a business process. This thesis also shows that more emphasis on the research of algorithm-based, more objective methods for the planning of infrastruc-ture alignment is desirable, as technological development has only recently started to realize the potential of these computational methods.