Reducing Manufacturing Costs of the Screen Dryer’s Hot Section by Design

In this thesis, the purpose was to find the cost distribution of the screen dryer and the largest cost factors. The hot section of the screen dryer was revealed as the biggest cost factor, so composing new cost efficient solutions were directed to it. DFMA (Design for Manufacture and Assembly) was chosen to help the design process. DFMA is a product design strategy developed for taking manufacturing and assembly costs into account at the early stages of the design process. In the theory part of the thesis, other methods of economical design and tools needed for estimating manufacturing costs are introduced. In the empirical part, the hot section of the screen dryer was divided into sub-assemblies and their manufacturing costs were estimated. The design propositions were directed to the self-manufactured assemblies and parts. The new manufacturing costs were calculated for the developed propositions. Lastly, the most cost efficient solutions were summarized. The savings on the self-manufactured assemblies were about 40 %, which was about 13 % of the combined total costs of the hot section.

Analysis of electricity distribution network operation business models and capitalization of control room functions with DMS

Electricity distribution network operation (NO) models are challenged as they are expected to continue to undergo changes during the coming decades in the fairly developed and regulated Nordic electricity market. Network asset managers are to adapt to competitive technoeconomical business models regarding the operation of increasingly intelligent distribution networks. Factors driving the changes for new business models within network operation include: increased investments in distributed automation (DA), regulative frameworks for annual profit limits and quality through outage cost, increasing end-customer demands, climatic changes and increasing use of data system tools, such as Distribution Management System (DMS). The doctoral thesis addresses the questions a) whether there exist conditions and qualifications for competitive markets within electricity distribution network operation and b) if so, identification of limitations and required business mechanisms. This doctoral thesis aims to provide an analytical business framework, primarily for electric utilities, for evaluation and development purposes of dedicated network operation models to meet future market dynamics within network operation. In the thesis, the generic build-up of a business model has been addressed through the use of the strategicbusiness hierarchy levels of mission, vision and strategy for definition of the strategic direction of the business followed by the planning, management and process execution levels of enterprisestrategy execution. Research questions within electricity distribution network operation are addressed at the specified hierarchy levels. The results of the research represent interdisciplinary findings in the areas of electrical engineering and production economics. The main scientific contributions include further development of the extended transaction cost economics (TCE) for government decisions within electricity networks and validation of the usability of the methodology for the electricity distribution industry. Moreover, DMS benefit evaluations in the thesis based on the outage cost calculations propose theoretical maximum benefits of DMS applications equalling roughly 25% of the annual outage costs and 10% of the respective operative costs in the case electric utility. Hence, the annual measurable theoretical benefits from the use of DMS applications are considerable. The theoretical results in the thesis are generally validated by surveys and questionnaires.

A Development and Application of a Three-Dimensional Model for a CFB Gasifier

The developing energy markets and rising energy system costs have sparked the need to find new forms of energy production and increase the self-sufficiency of energy production. One alternative is gasification, whose principles have been known for decades, but it is only recently when the technology has become a true alternative. However, in order to meet the requirements of modern energy production methods, it is necessary to study the phenomenon thoroughly. In order to understand the gasification process better and optimize it from the viewpoint of ecology and energy efficiency, it is necessary to develop effective and reliable modeling tools for gasifiers. The main aims of this work have been to understand gasification as a process and furthermore to develop an existing three-dimensional circulating fluidized bed modeling tool for modeling of gasification. The model is applied to two gasification processes of 12 and 50 MWth. The results of modeling and measurements have been compared and subsequently reviewed. The work was done in co-operation with Lappeenranta University of Technology and Foster Wheeler Energia Oy.

Factors Regulating Chondrogenic Differentiation

Chondrogenesis is a co-ordinated differentiation process in which mesenchymal cells condensate, differentiate into chondrocytes and begin to secrete molecules that form the extracellular matrix. It is regulated in a spatio-temporal manner by cellular interactions and growth and differentiation factors that modulate cellular signalling pathways and transcription of specific genes. Moreover, post-transcriptional regulation by microRNAs (miRNAs) has appeared to play a central role in diverse biological processes, but their role in skeletal development is not fully understood. Mesenchymal stromal cells (MSCs) are multipotent cells present in a variety of adult tissues, including bone marrow and adipose tissue. They can be isolated, expanded and, under defined conditions, induced to differentiate into multiple cell lineages including chondrocytes, osteoblasts and adipocytes in vitro and in vivo. Owing to their intrinsic capability to self-renew and differentiate into functional cell types, MSCs provide a promising source for cell-based therapeutic strategies for various degenerative diseases, such as osteoarthritis (OA). Due to the potential therapeutic applications, it is of importance to better understand the MSC biology and the regulatory mechanisms of their differentiation. In this study, an in vitro assay for chondrogenic differentiation of mouse MSCs (mMSCs) was developed for the screening of various factors for their chondrogenic potential. Conditions were optimized for pellet cultures by inducing mMSC with different bone morphogenetic proteins (BMPs) that were selected based on their known chondrogenic relevance. Characterization of the surface epitope profile, differentiation capacity and molecular signature of mMSCs illustrated the importance of cell population composition and the interaction between different populations in the cell fate determination and differentiation of MSCs. Regulation of Wnt signalling activity by Wnt antagonist sFRP-1 was elucidated as a potential modulator of lineage commitment. Delta-like 1 (dlk1), a factor regulating adipogenesis and osteogenesis, was shown to exhibit stage-specific expression during embryonic chondrogenesis and identified as a novel regulator of chondrogenesis, possibly through mediating the effect of TGF-beta1. Moreover, miRNA profiling demonstrated that MSCs differentiating into a certain lineage exhibit a specific miRNA expression profile. The complex regulatory network between miRNAs and transcription factors is suggested to play a crucial role in fine-tuning the differentiation of MSCs. These results demonstrate that commitment of mesenchymal stromal cells and further differentiation into specific lineages is regulated by interactions between MSCs, various growth and transcription factors, and miRNA-mediated translational repression of lineage-specific genes.

Integrating eco-innovation principles into regional strategy and policy: case of Päijät-Häme region, Finland

This study focuses on the integration of eco-innovation principles into strategy and policy at the regional level. The importance of regions as a level for integrating eco-innovative programs and activities served as the point of interest for this study. Eco-innovative activities and technologies are seen as means to meet sustainable development objective of improving regions’ quality of life. This study is conducted to get an in-depth understanding and learning about eco-innovation at regional level, and to know the basic concepts that are important in integrating eco-innovation principles into regional policy. Other specific objectives of this study are to know how eco-innovation are developed and practiced in the regions of the EU, and to analyze the main characteristic features of an eco-innovation model that is specifically developed at Päijät-Häme Region in Finland. Paijät-Häme Region is noted for its successful eco-innovation strategies and programs, hence, taken as casework in this study. Both primary (interviews) and secondary data (publicly available documents) are utilized in this study. The study shows that eco-innovation plays an important role in regional strategy as reviewed based on the experience of other regions in the EU. This is because of its localized nature which makes it easier to facilitate in a regional setting. Since regional authorities and policy-makers are normally focused on solving its localized environmental problems, eco-innovation principles can easily be integrated into regional strategy. The case study highlights Päijät-Häme Region’s eco-innovation strategies and projects which are characterized by strong connection of knowledge-producing institutions. Policy instruments supporting eco-innovation (e.g. environmental technologies) are very much focused on clean technologies, hence, justifying the formation of cleantech clusters and business parks in Päijät-Häme Region. A newly conceptualized SAMPO model of eco-innovation has been developed in Päijät-Häme Region to better capture the region’s characteristics and to eventually replace the current model employed by the Päijät-Häme Regional Authority. The SAMPO model is still under construction, however, review of its principles points to some of its three important spearheads – practice-based innovation, design (eco-design) and clean technology or environmental technology (environment).

Complexity Optimization in Product Development with Modularization

A company’s competence to manage its product portfolio complexity is becoming critically important in the rapidly changing business environment. The continuous evolvement of customer needs, the competitive market environment and internal product development lead to increasing complexity in product portfolios. The companies that manage the complexity in product development are more profitable in the long run. The complexity derives from product development and management processes where the new product variant development is not managed efficiently. Complexity is managed with modularization which is a method that divides the product structure into modules. In modularization, it is essential to take into account the trade-off between the perceived customer value and the module or component commonality across the products. Another goal is to enable the product configuration to be more flexible. The benefits are achieved through optimizing complexity in module offering and deriving the new product variants more flexibly and accurately. The developed modularization process includes the process steps for preparation, mapping the current situation, the creation of a modular strategy and implementing the strategy. Also the organization and support systems have to be adapted to follow-up targets and to execute modularization in practice.

Methods for construction and analysis of computational models in systems biology : applications to the modelling of the heat shock response and the self-assembly of intermediate filaments

Systems biology is a new, emerging and rapidly developing, multidisciplinary research field that aims to study biochemical and biological systems from a holistic perspective, with the goal of providing a comprehensive, system- level understanding of cellular behaviour. In this way, it addresses one of the greatest challenges faced by contemporary biology, which is to compre- hend the function of complex biological systems. Systems biology combines various methods that originate from scientific disciplines such as molecu- lar biology, chemistry, engineering sciences, mathematics, computer science and systems theory. Systems biology, unlike “traditional” biology, focuses on high-level concepts such as: network, component, robustness, efficiency, control, regulation, hierarchical design, synchronization, concurrency, and many others. The very terminology of systems biology is “foreign” to “tra- ditional” biology, marks its drastic shift in the research paradigm and it indicates close linkage of systems biology to computer science. One of the basic tools utilized in systems biology is the mathematical modelling of life processes tightly linked to experimental practice. The stud- ies contained in this thesis revolve around a number of challenges commonly encountered in the computational modelling in systems biology. The re- search comprises of the development and application of a broad range of methods originating in the fields of computer science and mathematics for construction and analysis of computational models in systems biology. In particular, the performed research is setup in the context of two biolog- ical phenomena chosen as modelling case studies: 1) the eukaryotic heat shock response and 2) the in vitro self-assembly of intermediate filaments, one of the main constituents of the cytoskeleton. The range of presented approaches spans from heuristic, through numerical and statistical to ana- lytical methods applied in the effort to formally describe and analyse the two biological processes. We notice however, that although applied to cer- tain case studies, the presented methods are not limited to them and can be utilized in the analysis of other biological mechanisms as well as com- plex systems in general. The full range of developed and applied modelling techniques as well as model analysis methodologies constitutes a rich mod- elling framework. Moreover, the presentation of the developed methods, their application to the two case studies and the discussions concerning their potentials and limitations point to the difficulties and challenges one encounters in computational modelling of biological systems. The problems of model identifiability, model comparison, model refinement, model inte- gration and extension, choice of the proper modelling framework and level of abstraction, or the choice of the proper scope of the model run through this thesis.

Software Test Process Development

In this thesis, the components important for testing work and organisational test process are identified and analysed. This work focuses on the testing activities in reallife software organisations, identifying the important test process components, observing testing work in practice, and analysing how the organisational test process could be developed. Software professionals from 14 different software organisations were interviewed to collect data on organisational test process and testing‐related factors. Moreover, additional data on organisational aspects was collected with a survey conducted on 31 organisations. This data was further analysed with the Grounded Theory method to identify the important test process components, and to observe how real‐life test organisations develop their testing activities. The results indicate that the test management at the project level is an important factor; the organisations do have sufficient test resources available, but they are not necessarily applied efficiently. In addition, organisations in general are reactive; they develop their process mainly to correct problems, not to enhance their efficiency or output quality. The results of this study allows organisations to have a better understanding of the test processes, and develop towards better practices and a culture of preventing problems, not reacting to them.

On the impact of rigorous approaches on the quality of development

Software systems are expanding and becoming increasingly present in everyday activities. The constantly evolving society demands that they deliver more functionality, are easy to use and work as expected. All these challenges increase the size and complexity of a system. People may not be aware of a presence of a software system, until it malfunctions or even fails to perform. The concept of being able to depend on the software is particularly significant when it comes to the critical systems. At this point quality of a system is regarded as an essential issue, since any deficiencies may lead to considerable money loss or life endangerment. Traditional development methods may not ensure a sufficiently high level of quality. Formal methods, on the other hand, allow us to achieve a high level of rigour and can be applied to develop a complete system or only a critical part of it. Such techniques, applied during system development starting at early design stages, increase the likelihood of obtaining a system that works as required. However, formal methods are sometimes considered difficult to utilise in traditional developments. Therefore, it is important to make them more accessible and reduce the gap between the formal and traditional development methods. This thesis explores the usability of rigorous approaches by giving an insight into formal designs with the use of graphical notation. The understandability of formal modelling is increased due to a compact representation of the development and related design decisions. The central objective of the thesis is to investigate the impact that rigorous approaches have on quality of developments. This means that it is necessary to establish certain techniques for evaluation of rigorous developments. Since we are studying various development settings and methods, specific measurement plans and a set of metrics need to be created for each setting. Our goal is to provide methods for collecting data and record evidence of the applicability of rigorous approaches. This would support the organisations in making decisions about integration of formal methods into their development processes. It is important to control the software development, especially in its initial stages. Therefore, we focus on the specification and modelling phases, as well as related artefacts, e.g. models. These have significant influence on the quality of a final system. Since application of formal methods may increase the complexity of a system, it may impact its maintainability, and thus quality. Our goal is to leverage quality of a system via metrics and measurements, as well as generic refinement patterns, which are applied to a model and a specification. We argue that they can facilitate the process of creating software systems, by e.g. controlling complexity and providing the modelling guidelines. Moreover, we find them as additional mechanisms for quality control and improvement, also for rigorous approaches. The main contribution of this thesis is to provide the metrics and measurements that help in assessing the impact of rigorous approaches on developments. We establish the techniques for the evaluation of certain aspects of quality, which are based on structural, syntactical and process related characteristics of an early-stage development artefacts, i.e. specifications and models. The presented approaches are applied to various case studies. The results of the investigation are juxtaposed with the perception of domain experts. It is our aspiration to promote measurements as an indispensable part of quality control process and a strategy towards the quality improvement.

Mental Well-being at Work. A Sign of a Healthy Organisation and a Necessary Precondition for Organisational Development

One of the aims of the study was to clarify the reliability and validity of the Job Diagnostic Survey (JDS) and the Eigenzustand (EZ) method as measures of the objective characteristics of work and short-term mental work load in the Finnish data. The reliability and validity were examined taking into consideration the theoretical backgrounds of the methods and the reliability of the measurements. The methods were used for finding out the preconditions for organisational development based on self-improvement and clarifying the impacts of working environment (organisational functioning and job characteristics) on a worker’s mental state and health. The influences were examined on a general level - regardless of individual personal or specific contextual factors. One aim was also to clarify how cognitions and emotions are intertwined and how they influence a person’s perception of the working environment. The data consisted of 15 blue-collar organisations in the public sector. The organisations were divided in target and comparison groups depending on the research frames. The data was collected by questionnaires by post. The exploratory and confirmatory factor analyses (Lisrel) were used as the main statistical methods in examining the structures of the methods and impacts between the variables. It was shown that it is possible for organisations to develop their working conditions themselves on specific preconditions. The advance of the development processes could be shown by the amount of the development activity as well as by the changes of the mental well-being (ability to act) and sick absenteeism of the personnel. It was found that the JDS and the EZ methods were reliable and valid measures in the Finnish data. It was shown that, in addition to the objective working environment (organisational functioning and job characteristics), also such a personal factor as selfesteem influences a person’s perception of mental work load. However, the influence did not seem to be direct. The importance of job satisfaction as a general indicator of perceived working conditions was emphasised. Emotional and cognitive factors were found to be functionally intertwined constituting a common factor. Organisational functioning and the characteristics of work had connections with a person’s health measured by sick absenteeism.

Tavoitteena strateginen kumppanuus. Case: Työkalun kehittäminen hankintatoimen johtamisen arvioimiseen

Diplomityön aiheena ovat hankintatoimen strateginen johtaminen ja toimittajasuhteiden hallinta pk-yrityksen näkökulmasta. Tutkimuksessa selvitettiin hankintatoimen merkitystä yrityksen strategisena kilpailutekijänä. Tutkimus määrittelee toimittajien yhteistyön periaatteet ja strategisen kumppanuuden lähtökohdat. Työn teoriaosuudessa selvitetään perusteet hankintastrategian määrittämiseksi. Hankintojen luokittelun perusteella tehtävät toimittajastrategiat ovat lähtökohtina toimittajasuhteiden kehittämiselle ja kumppanuudelle. Arviointimenetelmistä työssä esitellään EFQM-malli, erityisesti hankintatoimen näkökulmasta katsottuna. Tutkimuksen empiirisessä osuudessa kehitetään uusi arviointimenetelmä hankintatoimen johtamisen kartoittamiseen. Itsearvioinnin perusteella yritys saa kokonaiskuvan strategisen hankintatoimensa nykytilasta ja tärkeimmistä kehityskohteista.

Competence in intensive and critical care nursing - development of a basic assessment scale for graduating nursing students

Intensive and critical care nursing is a speciality in its own right and with its own nature within the nursing profession. This speciality poses its own demands for nursing competencies. Intensive and critical care nursing is focused on severely ill patients and their significant others. The patients are comprehensively cared for, constantly monitored and their vital functions are sustained artificially. The main goal is to win time to cure the cause of the patient’s situation or illness. The purpose of this empirical study was i) to describe and define competence and competence requirements in intensive and critical care nursing, ii) to develop a basic measurement scale for competence assessment in intensive and critical care nursing for graduating nursing students, and iii) to describe and evaluate graduating nursing students’ basic competence in intensive and critical care nursing by seeking the reference basis of self-evaluated basic competence in intensive and critical care nursing from ICU nurses. However, the main focus of this study was on the outcomes of nursing education in this nursing speciality. The study was carried out in different phases: basic exploration of competence (phase 1 and 2), instrumentation of competence (phase 3) and evaluation of competence (phase 4). Phase 1 (n=130) evaluated graduating nursing students’ basic biological and physiological knowledge and skills for working in intensive and critical care with Basic Knowledge Assessment Tool version 5 (BKAT-5, Toth 2012). Phase 2 focused on defining competence in intensive and critical care nursing with the help of literature review (n=45 empirical studies) as well as competence requirements in intensive and critical care nursing with the help of experts (n=45 experts) in a Delphi study. In phase 3 the scale Intensive and Critical Care Nursing Competence Scale (ICCN-CS) was developed and tested twice (pilot test 1: n=18 students and n=12 nurses; pilot test 2: n=56 students and n=54 nurses). Finally, in phase 4, graduating nursing students’ competence was evaluated with ICCN-CS and BKAT version 7 (Toth 2012). In order to develop a valid assessment scale of competence for graduating nursing students and to evaluate and establish the competence of graduating nursing students, empirical data were retrieved at the same time from both graduating nursing students (n=139) and ICU nurses (n=431). Competence can be divided into clinical and general professional competence. It can be defined as a specific knowledge base, skill base, attitude and value base and experience base of nursing and the personal base of an intensive and critical care nurse. Personal base was excluded in this self-evaluation based scale. The ICCN-CS-1 consists of 144 items (6 sum variables). Finally, it became evident that the experience base of competence is not a suitable sum variable in holistic intensive and critical care competence scale for graduating nursing students because of their minor experience in this special nursing area. ICCN-CS-1 is a reliable and tolerably valid scale for use among graduating nursing students and ICU nurses Among students, basic competence of intensive and critical care nursing was self-rated as good by 69%, as excellent by 25% and as moderate by 6%. However, graduating nursing students’ basic biological and physiological knowledge and skills for working in intensive and critical care were poor. The students rated their clinical and professional competence as good, and their knowledge base and skill base as moderate. They gave slightly higher ratings for their knowledge base than skill base. Differences in basic competence emerged between graduating nursing students and ICU nurses. The students’ self-ratings of both their basic competence and clinical and professional competence were significantly lower than the nurses’ ratings. The students’ self-ratings of their knowledge and skill base were also statistically significantly lower than nurses’ ratings. However, both groups reported the same attitude and value base, which was excellent. The strongest factor explaining students’ conception of their competence was their experience of autonomy in nursing. Conclusions: Competence in intensive and critical care nursing is a multidimensional concept. Basic competence in intensive and critical care nursing can be measured with self-evaluation based scale but alongside should be used an objective evaluation method. Graduating nursing students’ basic competence in intensive and critical care nursing is good but their knowledge and skill base are moderate. Especially the biological and physiological knowledge base is poor. Therefore in future in intensive and critical care nursing education should be focused on both strengthening students’ biological and physiological knowledge base and on strengthening their overall skill base. Practical implications are presented for nursing education, practice and administration. In future, research should focus on education methods and contents, mentoring of clinical practice and orientation programmes as well as further development of the scale.

Partisaanisodasta alueelliseen puolustusjärjestelmään : jugoslavialaisen sotataidollisen ajattelun kehittyminen toisen maailmansodan jälkeen

Väitöskirjan tavoitteena on ollut rakentaa kokonaiskuva aiheesta Jugoslavialaisen sotataidollisen ajattelun kehittyminen toisen maailmansodan jälkeen. Tutkimuksessa ei ole rajoituttu ainoastaan kuvailemaan sotataidollisen ajattelun kehittyminen, vaan on pyritty selvittämään kehittymiseen vaikuttaneet tekijät ja vastaamaan kysymykseen, miksi näin on tapahtunut? Aiemmat länsimaiset tutkimukset ovat tarkastelleet jugoslavialaista sotataitoa tai maanpuolustusta vain jostain tietystä rajallisesta näkökulmasta, kuten esimerkiksi Jugoslavian kansanarmeijaa, asevoimien vaikutusta maan poliittiseen elämään tai sotilaallista doktriinia koskien. Sotataidon kehittymiseen vaikuttavat tekijät huomioivaa kokonaisesitystä ole tehty. Myös jugoslavialainen sotataidollinen ajattelu on jäänyt pääosin pimentoon. Jugoslavialainen maan sotataitoon kohdistunut tutkimus on ollut laajaa ja monipuolista, mutta sen käytettävyyteen osittain vaikuttaa marxilais-leniniläinen materialistis-dialektinen, historialliseen materialismiin perustuva tutkimusmenetelmä. Väitöskirjan päätutkimusaineiston ovat muodostaneet alkuperäislähteet, ensisijaisesti jugoslavialaiset ohjesäännöt, käsikirjat, oppaat ja oppikirjat. Muu lähteistö on koostunut lähinnä arkistoasiakirjoista ja muusta kirjallisuudesta. Tutkimusmenetelmä on ollut historiatieteellinen käsittäen muun muassa ulkoisen ja sisäisen lähdekritiikin harjoittamisen, tietojen varmistamisen mahdollisimman useasta toisistaan riippumattomasta lähteestä sekä pyrkimyksen rekonstruoida ristiriidaton kokonaiskuva tutkimuskohteesta. Eri lähteistä ja lähderyhmistä saatuja tietoja on vertailtu, analysoitu sekä yhdistetty kriittisesti. Lähteiden käytettävyyden, lähdearvon ja luotettavuuden arviointi ovat olleet merkittävässä roolissa, näistä kaikista tärkeimpänä luotettavuuden arviointi. Sisäisen ja ulkoisen lähdekritiikin keinoin on pyritty luomaan oma ristiriidaton tulkinta kokonaisuudesta, jugoslavialaisen sotataidollisen ajattelun kehittymisestä toisen maailmansodan jälkeen. Tutkimuksessa on pitäydytty niin pitkälle kuin mahdollista jugoslavialaisen sotataidon alkuperäisessä terminologiassa. Jugoslavialaisia termejä ei ole muokattu vastaamaan paremmin esimerkiksi tällä hetkellä länsimaisessa sotataidossa käytettyjä käsitteitä. Väitöskirjan rakenne on temaattinen. Läpi koko tutkittavan ajanjakson jugoslavialaisen sotataidollisen ajattelun kehittymisessä on tunnistettavissa samat määräävät tekijät: historialliset taustatekijät, sotilaallinen uhka, sotilaallinen doktriini, lakiperusteet, kommunistiliiton ohjaus ja asevoimien sekä yhteiskunnan valmiuden kehittyminen. Jugoslaviassa puhuttiin aseelliseen kamppailuun vaikuttavista sodankäynnin faktoreista, joita olivat yhteiskunnalliset tekijät, materiaalis-tekniset tekijät ja sotilaalliset tekijät. Kaikista tärkeimpänä tekijänä pidettiin kuitenkin ihmistä itseään, vaikka ihmisen merkitys välillä tuntuikin hukkuvan ”moraalis-poliittiset tekijät”-sanahirviön alle. Tutkimuskysymyksiin on vastattu sotataitoon vaikuttaneiden edellä mainittujen tekijöiden kautta. Kuhunkin muutostekijään liittyvä kehitys on kuvattu kronologisena esityksenä. Kansan vapautussodassa vuosina 1941–1945 perustettujen partisaaniyksiköiden muodostamisessa sekä niiden toimintamenetelmissä on havaittavissa runsaasti yhtymäkohtia 1700- ja 1800-luvun hajdukkijoukkojen sekä 1800-luvun lopun ja 1900-luvun alun četnikkijoukkojen vastaaviin periaatteisiin. Samankaltaisuuksia ilmenee 1950-luvulta alkaen alueellisen puolustuksen joukkojen ja partisaaniyksiköiden toimintamenetelmien yhteydessä väliaikaisesti menetetyllä alueella toimittaessa. Kansan tukeen, karismaattisiin johtajiin ja yllätyselementtiin perustuva sissitoiminta on perinteistä eteläslaavilaista sotataitoa. Sodanjälkeinen jugoslavialainen sotataito oli jatkumoa eteläslaavien vuosisatoja vanhalle sotataidolliselle perinteelle, vaikka sitä ei julkisesti Jugoslaviassa muutamia poikkeuksia lukuun ottamatta myönnettykään. Jugoslavian sotilaallinen doktriini oli luotu kaikista suunnista kohdistuvia hyökkäyksiä vastaan, mutta sotilaallisen uhkan painotukset vaihtelivat usein, jopa vain muutaman vuoden välein. Tämä ei johtunut päättämättömyydestä eikä pelkästään koetun uhkan suunnan vaihtumisesta. Painottamalla sisäisen ja ulkoisen uhkan jatkuvuutta sekä uhkan suunnan vaihtelua pyrittiin pitämään maanpuolustuspiirit valppaina ja kansalaiset aktiivisina. Tällä tavalla myös perusteltiin maanpuolustuksen korkeita kustannuksia ja ennen kaikkea pyrittiin lisäämään maan sisäistä veljeyttä ja yhtenäisyyttä. On ilmeistä, että sekä lännestä että idästä kohdistui Jugoslavian suuntaan suurta poliittista ja sotilaallista intressiä kylmän sodan vuosina 1945–1990, mutta suoran sotilaallisen uhkan aukoton todistaminen olisi kuitenkin hankalaa. Oleellista onkin jugoslavialaisten oma käsitys maataan vastaan kohdistuneesta sotilaallisesta uhkasta. Sisäisen uhkan vaikutus alkoi kasvaa 1970-luvun alkupuolelta lähtien ja se johti lopulta 1980-luvulla alueellisen puolustuksen joukkojen esikuntien lakkauttamiseen ja taisteluvälineiden hajavarastointijärjestelmän purkamiseen. Yhteiskunnallisista tekijöistä merkittävimpinä sotataitoon ja sotataidolliseen ajatteluun vaikuttaneina osina olivat lait ja Jugoslavian kommunistiliitto. Perustuslakiin ja lakiin kansallisesta puolustuksesta sekä kommunistiliiton päätöslauselmiin sisällytetyt vaatimukset sotataidon kehittymiselle kuitenkin vain toistivat sotilaallisessa doktriinissa määritettyjä suuntaviivoja sekä määräyksiä. Maanpuolustukseen liittyneiden määräysten ja ohjeiden hyväksymiselle laillisen järjestyksen mukaisesti annettiin kuitenkin erittäin suuri arvo. Niiden toimeenpanon leviäminen maanlaajuisesti varmistettiin puolueen päätöksillä velvoittamalla muun muassa kommunistiliiton paikallisorganisaatiot, puoluesolut asevoimien sisällä sekä kaikki liittovaltion hallintotasot tekemään kaikkensa yleisen kansanpuolustuksen ja sitä ilmentävän sotataidon toteutumisen eteen. Materiaalis-teknisen tekijän kokonaisuus sisälsi aseet ja varusteet sekä niihin liittyviä muita seikkoja, kuten yhteiskunnan teollisuuden kehittymisen asteen sekä kyvyn suojautua vihollisen taisteluvälineitä vastaan ja luoda vihollisen aseita vastaan tehokkaampi vasta-ase. Siihen luettiin myös yksilöiden, taktisten ja yhdistettyjen taktisten yksiköiden sekä koko kansan koulutus aseiden ja varusteiden tarkoituksenmukaiseen käyttöön. Vaikka jugoslavialainen aseteollisuus kehittyi tutkimusperiodin aikana voimakkaasti, joutui maa taloudellisten resurssiensa rajallisuuden ja mahdollisen vihollishyökkäyksen ylivoimaisuuden havaittuaan toteamaan, että maanpuolustuksen ongelmia ei voida ratkaista materiaalin ja tekniikan määrällä tai laadulla. Ratkaisun oli löydyttävä sotilaallisista tekijöistä ja varsinkin sotataidosta. Sotilaalliset tekijät ja prosessit olivat jugoslavialaisen sotataidon ja sotataidollisen ajattelun kehittymisen kannalta tärkein muutostekijä. Sotilaallisten tekijöiden ytimen muodosti sotataito, joka Jugoslaviassa koostui teoriasta ja käytännöstä. Tämä jako koski sotataidon kolmea tasoa: strategiaa, operatiikkaa ja taktiikkaa. Sotataitoon kuuluvina osina pidettiin muun muassa taisteluvalmiutta, liikekannallepanovalmiutta, yhteiskunnallis-poliittisten yhteisöjen aseetonta vastarintaa, aseellisen kamppailun operatiivista ja taktista tasoa, materiaalista ja teknistä varustamista, sotatalouden valmistelujen organisointia sekä yhteiskunnallisia palveluja poikkeusoloissa. Osa näistä kuului edellä mainittuihin yhteiskunnallisiin tai materiaalis-teknisiin tekijöihin. Jugoslavialainen sotataito onkin nähtävä matriisinomaisena kokonaisuutena, jossa sotataidon kolmeen toiminnalliseen tasoon, strategiaan, operatiikkaan ja taktiikkaan vaikuttivat historialliset taustatekijät, sotilaallinen uhka, yhteiskunnalliset tekijät ja materiaalis-tekniset tekijät. Jugoslavialaisen sotataidon kokonaisuuteen kuului myös se, että mainitut muutostekijät vaikuttivat vielä toisiinsa. Lopputuloksena näin kokonaisvaltaisesta näkemyksestä sotataitoon ja sotataidolliseen ajatteluun Jugoslavia kykeni luomaan poikkeuksellisen tehokkaana pidetyn puolustusratkaisun, jossa koko yhteiskunnan kaikki resurssit pystyttiin suuntaamaan hyökkäyksen torjumiseen ja maahan tunkeutuneiden pois ajamiseen. Aiempi tutkimus on nähnyt jugoslavialaisen sotataidon kehittymisen keskeisimpänä vaikuttimena ja murroskohtana Varsovan liiton joukkojen toimeenpaneman Tšekkoslovakian miehityksen ja siitä seuranneen koetun uhkan merkittävän voimistumisen. Yleisen kansanpuolustuksen doktriiniin liittyvä taustatutkimus, teorianmuodostus ja doktriinin käyttöönotto tapahtuivat kuitenkin jo 1950-luvulla. Tšekkoslovakian miehitys toimi vain muutoksen toimeenpanoa vauhdittavana tekijänä. Jugoslavialaiset korostivat, että jugoslavialaisessa yhteiskunnassa keskeisessä asemassa ollut yhteisjohtoisuuden periaate ulottui myös maanpuolustukseen ja sotataitoon. Tutkimusaineistoon perehtyminen kuitenkin osoitti, että yleisen kansanpuolustuksen kokonaisuutta kuvaavat oppikirjat, laeissa asetetut määräykset ja Jugoslavian kommunistiliiton julkaisemat vaatimukset eivät olleet jalkautuneet sotataidon teoriaan tai käytäntöön operatiivisella tai taktisella tasolla. Strategisella tasolla yhteisjohtoisuus esiintyi näkyvämmin vain sotilaallisen konseptin ja strategian yhteydessä. Sotilaallisen doktriinin osalta yhteisjohtoisuus ilmeni lähinnä kahdessa asiassa. Alueellisen puolustuksen yksiköiden varustamisvelvoite oli asetettu siviilihallinnon eri tasojen vastuulle. Alueellisen puolustuksen esikunnat ja komentajat olivat vastuussa yleisen kansanpuolustuksen ja yhteiskunnallisen itsesuojelun komiteoille. Siviilihallinnon organisaatioiden kyky varustaa alueellisen puolustuksen yksiköt osoittautui kuitenkin heikoksi. Alueellisen puolustuksen esikunnatkin toimivat upseereiden johtamina sotilaallisina johtoportaina, ja yleisen kansanpuolustuksen ja yhteiskunnallisen itsesuojelun komiteoiden toiminta komentajien ja esikuntien suuntaan rajoittui vain nimelliseen ohjaukseen. Yhteisjohtoisuus osoittautuikin tutkimuksen kuluessa piirteeksi, joka julkisesta retoriikasta huolimatta ei toteutunut jugoslavialaisessa sotataidon praktiikassa. Jugoslavialaisen sotataidollisen ajattelun kehittymisen kaari käynnistyi partisaanisodasta ja päätyi alueelliseen puolustusjärjestelmään. Kansakunta ja sen useat eri kansallisuudet onnistuivat luomaan tieteelliseen ja tutkittuun tietoon perustuvan välineen, sotataidon teorian ja käytännön, joka suojeli maata yli puolen vuosisadan ajan. Yleinen kansanpuolustus sekä jugoslavialainen sotataito ovat toisiensa synonyymejä, seurauksia ja synnyttäjiä. Puolustusratkaisu lähti omista kansallisista lähtökohdista, siihen sulautettiin valikoiden ja jalostettuna hyviksi sekä menestyksekkäiksi koettuja ulkomaisia elementtejä sekä vaikutteita. Sitä perusteltiin monipuolisilla poliittisilla, ideologisilla, teoreettisilla, historiallisilla sekä nykyaikaisilla sotataidollisilla argumenteilla, mutta kaikesta tästä huolimatta sen ydin oli omintakeinen jugoslavialainen sotataidollinen ajattelu.

Corporate Social Responsibility in the Oil and Gas Industry: Environmental Management Systems as a Source of Sustainable Development

The environmental aspect of corporate social responsibility (CSR) expressed through the process of the EMS implementation in the oil and gas companies is identified as the main subject of this research. In the theoretical part, the basic attention is paid to justification of a link between CSR and environmental management. The achievement of sustainable competitive advantage as a result of environmental capital growth and inclusion of the socially responsible activities in the corporate strategy is another issue that is of special significance here. Besides, two basic forms of environmental management systems (environmental decision support systems and environmental information management systems) are explored and their role in effective stakeholder interaction is tackled. The most crucial benefits of EMS are also analyzed to underline its importance as a source of sustainable development. Further research is based on the survey of 51 sampled oil and gas companies (both publicly owned and state owned ones) originated from different countries all over the world and providing reports on sustainability issues in the open access. To analyze their approach to sustainable development, a specifically designed evaluation matrix with 37 indicators developed in accordance with the General Reporting Initiative (GRI) guidelines for non-financial reporting was prepared. Additionally, the quality of environmental information disclosure was measured on the basis of a quality – quantity matrix. According to results of research, oil and gas companies prefer implementing reactive measures to the costly and knowledge-intensive proactive techniques for elimination of the negative environmental impacts. Besides, it was identified that the environmental performance disclosure is mostly rather limited, so that the quality of non-financial reporting can be judged as quite insufficient. In spite of the fact that most of the oil and gas companies in the sample claim the EMS to be embedded currently in their structure, they often do not provide any details for the process of their implementation. As a potential for the further development of EMS, author mentions possible integration of their different forms in a single entity, extension of existing structure on the basis of consolidation of the structural and strategic precautions as well as development of a unified certification standard instead of several ones that exist today in order to enhance control on the EMS implementation.

Self-Assessement Report for International Accreditation - Bachelor's and Master's degree programmes in Energy Technology

Self-Assessment Report was made for the accreditation of degree programmes in Energy Technology. The report includes the following items: the content,concept and implementation of of the degree programmes, the resources, the quality management and further development of the degree programmes.