Productivity and Services – Safety Telephone Services for the Elderly

Previous research on productivity is often associated with manufacturing or uses manufacturing definitions of productivity. Marketing research on services has not been satisfied with the manufacturing definitions. No universal definition for service productivity exists. The lack of a universal definition highlights the complexity entailed in the concept of productivity. The objective of this study was to investigate service productivity in situations, where traditional ways are in some cases even not possible or are not enough. In one definition of the productivity of service organisations there is the efficiency of the organisation on the input side and on the output side the customers’ perceived quality or value-in-use. To learn about value-in-use, many methods have been developed. A common practice is to make customer opinion surveys in the form of customer questionnaires and interviews. However, customers cannot always be asked directly, for example, because of impaired cognitive abilities. Such cases include the elderly and children. Furthermore, customer opinion surveys are time consuming. In addition, customers do not always know what kind of services they would benefit from. For the empirical part of the study, a business area was identified where traditional ways of measuring value-in-use are difficult or in some cases even not possible. This business area is safety telephone services. These services are most often used by the elderly. The way to define value-in-use here was to assess how well the services offered met customer expectations. Comparing the services customers asked for and the services provided to them indicated whether customer expectations were met. This study showed that customers had their ideas concerning the contents of the services but many times the services provided did not meet these expectations. Organisational efficiency aspirations can decrease customers’ value-in-use. This study found a solution, in which increasing organisational efficiency would go hand-in-hand with increasing customers’ value-in-use; the result being that the organisations’ needs and the service users’ expectations were in line. Value creation for customers produced organisational efficiency and thus increased productivity. In this study, customer expectations were observed by means of wellness technology. With the help of modern technology, customer expectations can be followed quickly and easily and customers can co-create with the organisation. This type of an approach could be useful even in the development of other services for other ages and in different contexts. If a service organisation decreases the number of personnel and, at the same time, tries to offer services to the same or a larger clientele, customers easily notice the change, which is often negative. To avoid harmful decrease in value-in-use, limitations to the aspiration of efficiency should be implemented – one of such is that the organisation is required to meet certain quality standards defined by experts. The aim is to secure that, as a result of efficiency aspirations in the organisation, the quality of the service offerings does not diminish below mutually agreed standards. Traditionally, when productivity in services has been estimated, organisational efficiency has not been combined with both customer expectations and an expert assessment of quality. This study contributes with novel thinking entitled ‘Relationship Management of the Elderly’. This study handles productivity, expert defined quality and value-in-use in an organisational context, which is practically untouched in previous research studies.

Brittleness of Paper

Brittleness is a well-known material characteristic but brittleness of paper is vaguely covered. The objective of this thesis was to characterize the phenomenon and causes around brittleness of paper and to clarify if it is a measurable property. Brittleness of paper was approached from the perspectives of paper physics and paper mills. Brittleness is a property of dry paper and it causes problems at the finishing stages of paper machine. According to paper physics, brittle materials fail in the elastic regime, while ductile materials can locally accumulate a plastic deformation prior to the fracture and they are often able to withstand higher stresses. Brittleness of paper is vastly affected by the surrounding conditions: paper as a hygroscopic material tries to get to the equilibrium. It is also affected by the quality of the pulp used. Measurement techniques can be divided into two categories: based on the viscoelastic behavior of paper and on the exposure to the mechanical stress of sort. The experimental part of the thesis was based on the trials with brittle and non-brittle mill-made LWC papers. It is divided into three parts: strength testing of the brittle and non-brittle papers, analysis of the conditions that may contribute the brittleness and the experimental methods to evaluate brittle behavior. The strength measurements confirmed the influence of the moisture content, but only tensile energy absorption and the fracture toughness measurements provided modest differences between the brittle and non-brittle papers. Versatile analysis of the possible contributing factors resulted into speculation, while the brittle papers contained higher amount of starch, triglycerides and steryl esters. The experimental research proved that the formation, the sensory impression and the variation of local strains may contain the crucial information of paper brittleness.

Tiedon jakaminen virtuaalisissa IT-projekteissa

Sekä projektimainen että virtuaalinen työskentely ovat arkipäivää IT-alalla. Arkipäivää ovat myös uutiset epäonnistuneista tietojärjestelmäprojekteis-ta. Tehokas tiedon jakaminen on projektien menestystekijä. Tutkielmassa etsittiin vastausta kysymykseen: mitkä ovat tiedon jakamisen esteitä ja edistäjiä virtuaalisissa tietojärjestelmäprojekteissa. Tutkimusstrategia oli vertaileva tapaustutkimus. Aineisto kerättiin teema-haastatteluilla. Haastatteluun osallistui kymmenen henkilöä neljästä eri projektista. Henkilöt olivat eri organisaatioista ja edustivat niin asiakkaan, toimittajan kuin alihankkijoidenkin näkemyksiä. Eniten projekteissa jaet-tiin projektinhallintaan liittyvää tietoa, mutta ihmisten johtamiseen liittyvää tietoa ja liiketoimintahyötyihin liittyvää tietoa jaettiin vähän. Haastattelujen perusteella merkittävimmät tiedon jakamiseen vaikuttavat tekijät ovat yh-teisen käsitteistön ja yhteisen ymmärryksen puute, luottamus, tietotekni-set välineet sekä projektipäällikön toiminta. Yhteenvetona todetaan, että virtuaalisuus ei projekteissa aiheuttanut ongelmia, mutta se korosti muista syistä syntyneitä ongelmia. Virtuaalipro-jekteissa on erityistä huomiota kiinnitettävä projektin alkuvaiheessa ta-pahtuvaan tutustumiseen.

Etäjohtaminen ja operatiivisten riskien hallinta finanssialalla

Tutkimuksen tarkoituksena on tarkastella etäjohtamista finanssitoimialan johtamismallina ja sen vaikutuksia toimialan operatiivisten riskien hallintaan. Tutkimuksessa toteutetaan kvalitatiivinen tutkimus finanssialalla toimivalle Case yritys X:lle ja tutkimusmenetelmänä käytetään teemahaastatteluja. Tutkimuksella pyritään selvittämään miten etäjohtaminen vaikuttaa yrityksen operatiivisten riskien hallintaan ja mitä muutoksia etäjohtamismalliin tulisi tehdä operatiivisten riskien hallinnan tehostamiseksi. Teoriaosuudessa käydään läpi etäjohtamisen ja finanssialan riskienhallintaa aikaisempien tutkimusten ja kirjallisuuden pohjalta. Tutkimuksessa selvitetään yrityksen yleisimmät operatiiviset riskit, niiden hallintakeinot ja pyritään teoriaan nojaten kehittämään etäjohtamismalliin menetelmiä tehokkaampaan operatiivisten riskien hallintaan. Tuloksissa vedetään yhteen yrityksen tämänhetkinen tilanne operatiivisessa riskienhallinnassa ja teemahaastattelujen sekä teorian pohjalta pyritään löytämään kehitysehdotuksia etäjohtamismalliin, mitä voitaisiin tehdä toisin. Teoria painottaa mm. HR:n sisällyttämistä osaksi operatiivista riskienhallintaa, vastuuhenkilöiden ja mittareiden asettamista ja kehittämistä sekä leader-johtajuutta ja Basel-säännöksiin perustuvaa operatiivisten riskienhallinnan viitekehystä. Empiirisessä osiossa haastatteluista kerätyt vastaukset ohjaavat teorian kanssa samansuuntaisiin kehitysehdotuksiin. Avainasemassa yrityksen operatiivisessa riskienhallinnassa ovat reagoiminen, osaava etäjohtaminen sekä johdonmukainen perehdytyssuunnitelma. Yritys X on tehnyt huomattavia toimenpiteitä etäjohtamismalliin ja jatkuva kehittäminen kohti parempaa operatiivista riskienhallintaa on liiketoimintastrategian keskiössä.

Savings Calculator for Centrifugal Pumps

Centrifugal pumps are one of the major energy consuming end-devices in developed coun-tries both in industrial and services sectors. According to recent studies, even 30 % of the energy used in pumping systems could be saved by more careful choosing of devices and system design. One of the most efficient and affordable ways to decrease the energy con-sumption of the pumping system is to substitute traditionally used flow control methods, like valve control, with modern variable speed drive (VSD) control. In this thesis, Microsoft Excel based program, Savings Calculator for Centrifugal Pumps (SCCP), is designed. SCCP calculates the achievable energy and financial savings when throttle control is substituted by VSD control in the pumping system. Compared to the sim-ilar existing programs, the goal is to make SCCP calculations more accurate and require less input information. Also some useful additional features are added to the designed program to make it more user friendly. The reliability of the calculations of designed program seem to vary depending on case. The results are corresponding accurately to the laboratory measurements, but there occurs high deviations in some cases, when the results are compared to the pump information specified by manufacturer. On the basis of verification in this thesis, SCCP seems to be at least as accurate as similar existing programs and it can be used as help in investment decision whether to have VSD or not.

RFID-teknologia kulunvalvonnassa

Tämä kandidaatintutkielma on kirjallisuuskatsaus, joka käsittelee RFID-teknologian hyöndyntämistä kulunvalvonnassa. Työssä perehdytään pintapuolisesti itse teknologiaan, ja luodaan katsaus kulunvalvontaan. Työn pääaihe on kuitenkin kulunvalvonnan ja RFID:n yhdistyminen: miten RFID:tä hyödynnetään kulunvalvonnan toteutuksissa ympäri maailmaa. Työssä tarkastellaan RFID:n vahvuuksia, sekä heikkouksia kulunvalvonnan suhteen. Tämän lisäksi pyritään luomaan kuva nykyisistä ja tulevista implementaatioista. Viimeinen tärkeä työn osa-alue on turvallisuus. RFID:tä käytetään korkeankin turvatason kulunvalvontaratkaisuissa ja tällöin turvallisuuden maksimoiminen on ensiarvoisen tärkeää.

Competitive advantage through proprietary erp implementation: analysis of the project Väinämö

In the market where companies similar in size and resources are competing, it is challenging to have any advantage over others. In order to stay afloat company needs to have capability to perform with fewer resources and yet provide better service. Hence development of efficient processes which can cut costs and improve performance is crucial. As business expands, processes become complicated and large amount of data needs to be managed and available on request. Different tools are used in companies to store and manage data, which facilitates better production and transactions. In the modern business world the most utilized tool for that purpose is ERP - Enterprise Resource Planning system. The focus of this research is to study how competitive advantage can be achieved by implementing proprietary ERP system in the company; ERP system that is in-house created, tailor made to match and align business needs and processes. Market is full of ERP software, but choosing the right one is a big challenge. Identifying the key features that need improvement in processes and data management, choosing the right ERP, implementing it and the follow-up is a long and expensive journey companies undergo. Some companies prefer to invest in a ready-made package bought from vendor and adjust it according to own business needs, while others focus on creating own system with in-house IT capabilities. In this research a case company is used and author tries to identify and analyze why organization in question decided to pursue the development of proprietary ERP system, how it has been implemented and whether it has been successful. Main conclusion and recommendation of this research is for companies to know core capabilities and constraints before choosing and implementing ERP system. Knowledge of factors that affect system change outcome is important, to make the right decisions on strategic level and implement on operational level. Duration of the project in the case company has lasted longer than anticipated. It has been reported that in cases of buying ready product from vendor, projects are delayed and completed over budget as well. In general, in case company implementation of proprietary ERP has been successful both from business performance figures and usability of system by employees. In terms of future research, conducting a study to calculate statistically ROI of both approaches; of buying ready product and creating own ERP will be beneficial.

Critical infrastructure protection against cyber threats

A postgraduate seminar series with a title Critical Infrastructure Protection against Cyber Threats held at the Department of Military Technology of the National Defence University in the fall of 2013 and 2014. This book is a collection of some of talks that were presented in the seminar. The papers address origin of critical infrastructure protection, wargaming cyberwar in critical infrastructure defence, cyber-target categorization, supervisory control and data acquisition systems vulnerabilities, electric power as critical infrastructure, improving situational awareness of critical infrastructure and trust based situation awareness in high security cloud environment. This set of papers tries to give some insight to current issues of the network-centric critical infrastructure protection. The seminar has always made a publication of the papers but this has been an internal publication of the Finnish Defence Forces and has not hindered publication of the papers in international conferences. Publication of these papers in peer reviewed conferences has indeed been always the goal of the seminar, since it teaches writing conference level papers. We still hope that an internal publication in the department series is useful to the Finnish Defence Forces by offering an easy access to these papers.

Palvelutuotteiden strateginen johtaminen suunnitteluliiketoiminnassa

Tutkimuksen tarkoituksena oli löytää suunnitteluliiketoiminnan palvelutuotteiden strategisen johdon käyttöön soveltuva menetelmä, tai työkalu, jonka avulla palvelutuotteiden kilpailukykyä ja kehitystarpeita voidaan helposti arvioida. Diplomityö pitää sisällään kolme tutkimuskysymystä. Ensimmäisellä tutkimuskysymyksellä pyritään keräämään tietoa suunnitteluorganisaation taustalla vaikuttavista menestystekijöistä. Toisen tutkimuskysymyksen avulla pyrittiin löytämään työkalu, tai menetelmä, palvelutuotteiden strategisen johdon käyttöön, tai sellaisen muodostamisen pohjaksi. Kolmas tutkimuskysymys liittyi suunnittelupalveluiden strategisen johtamisen työkalun muodostamiseen. Tutkimuksen tuloksena tuotettiin suunnitteluorganisaation palvelutuotteiden johtamisen viitekehys. Viitekehyksessä palvelutuotteet lajitellaan havainnolliselle luokittelutaululle, jossa pystykoordinaattina käytetään palvelutuotteen markkinoiden houkuttelevuutta ja vaakakoordinaattina palvelutuotteen vahvuutta organisaatiossa. Tutkimuksessa on esitetty suunnitteluliiketoiminnan strategisen johtamisen onnistumisessa vaikuttavat taustatekijät, markkinoiden houkuttelevuuden keskeisimmät mittarit, sekä suunnittelupalveluiden vahvuutta kuvaavat tekijät.

Sähköisen taloushallinnon vaikutukset tilitoimiston työskentelytapoihin Case-yrityksessä

Tämän tutkielman tavoitteena oli selvittää, mitä mahdollisuuksia ja haasteita sähköinen taloushallinto tuo tilitoimistoille ja miten ne vaikuttavat työskentelyyn. Vaikka sähköisiä taloushallinnon järjestelmiä on tutkittu paljon jo aiemmin, vielä ei kovin laajasti ole tarkasteltu sitä, miten ne käytännössä vaikuttavat tilitoimistoihin. Tutkielma on luonteeltaan kvalitatiivinen ja se on toteutettu case-tutkimuksena lappeenrantalaisesta tilitoimistosta. Tutkimuksen teoria rakentuu aihetta käsittelevän kirjallisuuden perusteella ja empiria on kerätty puolistrukturoiduilla teemahaastatteluilla. Haastatteluista saatuja tuloksia on verrattu kirjallisuudessa esitettyihin näkemyksiin sähköisen taloushallinnon mahdollisuuksista ja haasteista sekä sähköisen taloushallinnon vaikutuksista työskentelyyn. Tutkimuksessa selvisi, että kirjallisuudessa ja käytännössä sähköisen taloushallinnon tarjoamat mahdollisuudet ja haasteet sekä niiden vaikutukset työskentelyyn eroavat toisistaan. Suurimpia mahdollisuuksia olivat työskentelyn parantunut tehokkuus, kustannussäästöt sekä saadun informaation parempi laatu. Teoriassa haasteiksi koettiin koulutuksen puute ja työntekijöiden sekä asiakkaiden muutosvastarinta. Käytännössä suurimman haasteen sähköisen taloushallinnon käytettävyydelle kuitenkin aiheuttavat ohjelmistot ja niiden mukanaan tuomat ongelmat. Sähköistymisen myötä kirjanpitäjistä tulee teoriassa enemmänkin konsultteja ja tilitoimistoissakin työskentelee erikseen esimerkiksi reskontranhoitajia. Tosiasiassa roolien muuttuminen ei kuitenkaan ole aivan itsestään selvää ja sähköisiin järjestelmiin siirtymisen odotetaan kestävän vielä kauan.

Local Binary Patterns in Focal-Plane Processing. Analysis and Applications

Feature extraction is the part of pattern recognition, where the sensor data is transformed into a more suitable form for the machine to interpret. The purpose of this step is also to reduce the amount of information passed to the next stages of the system, and to preserve the essential information in the view of discriminating the data into different classes. For instance, in the case of image analysis the actual image intensities are vulnerable to various environmental effects, such as lighting changes and the feature extraction can be used as means for detecting features, which are invariant to certain types of illumination changes. Finally, classification tries to make decisions based on the previously transformed data. The main focus of this thesis is on developing new methods for the embedded feature extraction based on local non-parametric image descriptors. Also, feature analysis is carried out for the selected image features. Low-level Local Binary Pattern (LBP) based features are in a main role in the analysis. In the embedded domain, the pattern recognition system must usually meet strict performance constraints, such as high speed, compact size and low power consumption. The characteristics of the final system can be seen as a trade-off between these metrics, which is largely affected by the decisions made during the implementation phase. The implementation alternatives of the LBP based feature extraction are explored in the embedded domain in the context of focal-plane vision processors. In particular, the thesis demonstrates the LBP extraction with MIPA4k massively parallel focal-plane processor IC. Also higher level processing is incorporated to this framework, by means of a framework for implementing a single chip face recognition system. Furthermore, a new method for determining optical flow based on LBPs, designed in particular to the embedded domain is presented. Inspired by some of the principles observed through the feature analysis of the Local Binary Patterns, an extension to the well known non-parametric rank transform is proposed, and its performance is evaluated in face recognition experiments with a standard dataset. Finally, an a priori model where the LBPs are seen as combinations of n-tuples is also presented

Computational studies of deformation in stainless steel rings due to torch heating

A support ring of AISI 304L stainless steel that holds vertical, parallel wires arranged in a circle forming a cylinder is studied. The wires are attached to the ring with heat-induced shrinkage. When the ring is heated with a torch the heat affected zone tries to expand while the adjacent cool structure obstructs the expansion causing upsetting. During cooling, the ring shrinks smaller than its original size clamping the wires. The most important requirement for the ring is that it should be as round as possible and the deformations should occur as overall shrinkage in the ring diameter. A three-dimensional nonlinear transient sequential thermo-structural Abaqus model is used together with a Fortran code that enters the heat flux to each affected element. The local and overall deformations in one ring inflicted by the heating are studied with a small amount of inspection on residual stresses. A variety of different cases are chosen to be studied with the model constructed to provide directional knowledge; torch flux with the means of speed, location of the wires, heating location and structural factors. The decrease of heating speed increases heat flux that rises the temperature increasing shrinkage. In a single progressive heating uneven distribution of shrinkage appears to the start/end region that can be partially fixed with using speeded heating’s to strengthen the heating of that region. Location of the wires affect greatly to the caused shrinkage unlike heating location. The ring structure affects also greatly to the shrinkage; smaller diameter, bigger ring height, thinner thickness and greater number of wires increase shrinkage.

Kilpailija-analyysi johdon työ kaluna – empiirinen analyysi ICT-toimialan yrityksistä

Merkittävät ja nopeat muutokset markkina- ja kilpailukentässä viimeisen kahden vuosikymmenen aikana ovat saaneet yhtiöt sekä tutkijat kiinnostumaan kilpaili-joista uudella tavalla. Systemaattisen kilpailijaseurannan määrä on lisääntynyt operatiivisessa liiketoimintaympäristössä merkittävästi. Kilpailijoita käsittelevä tut-kimus on lisääntynyt ja siihen ovat ottaneet osaa myös tutkijat uusilta tieteenaloil-ta. Kilpailijaetua sekä kilpailuanalyyseja käsittelevään tutkimukseen otti aikai-semmin osaa lähinnä johtamista ja markkinointia tutkivat tutkijat. Erityisesti ta-loushallintonäkökulman mukaantulo keskusteluun on ollut merkittävää. Tämän tutkimuksen tavoitteena oli selvittää, miksi yritykset toteuttavat kilpailija-analyyseja. Lisäksi tutkimuksessa pyrittiin lisäämään tietoa siitä, miten yritykset käytännössä toteuttavat kilpailija-analyyseja. Työn empiirinen tutkimus toteutettiin laadullisin tutkimusmenetelmin ja haastatteluaineisto kerättiin teemahaastatte-luin. Haastatteluaineisto koostui kolmesta Suomessa liiketoimintaa harjoittavasta ICT-toimialan yrityksestä. Haastatteluaineiston tulokset olivat pääosin linjassa kirjallisuuden kanssa. Kilpailija-analyysin rooli nähtiin merkittävänä yhtiön laa-jemmassa strategiatyössä. Syyt siihen, miksi kilpailija-analyysiä toteutettiin, erosi-vat hyvin vähän yhtiöiden välillä. Kilpailija-analyysin käytännön toteutuksessa nähtiin merkittävämpiä eroja yhtiöiden välillä. Haastatteluaineiston pieni koko ei kuitenkaan mahdollista yleistysten tekemistä. Tutkimusalueesta tulee tehdä tule-vaisuudessa merkittävästi lisätutkimusta. Erityisesti strukturoituneempia kilpailija-analyysimalleja tarvitaan tulevaisuudessa lisää.

Recent advances in monocular model-based tracking: a systematic literature review

In this paper, we review the advances of monocular model-based tracking for last ten years period until 2014. In 2005, Lepetit, et. al, [19] reviewed the status of monocular model based rigid body tracking. Since then, direct 3D tracking has become quite popular research area, but monocular model-based tracking should still not be forgotten. We mainly focus on tracking, which could be applied to aug- mented reality, but also some other applications are covered. Given the wide subject area this paper tries to give a broad view on the research that has been conducted, giving the reader an introduction to the different disciplines that are tightly related to model-based tracking. The work has been conducted by searching through well known academic search databases in a systematic manner, and by selecting certain publications for closer examination. We analyze the results by dividing the found papers into different categories by their way of implementation. The issues which have not yet been solved are discussed. We also discuss on emerging model-based methods such as fusing different types of features and region-based pose estimation which could show the way for future research in this subject.

Cloud computing contribution to manufacturing industry

Manufacturing industry has been always facing challenge to improve the production efficiency, product quality, innovation ability and struggling to adopt cost-effective manufacturing system. In recent years cloud computing is emerging as one of the major enablers for the manufacturing industry. Combining the emerged cloud computing and other advanced manufacturing technologies such as Internet of Things, service-oriented architecture (SOA), networked manufacturing (NM) and manufacturing grid (MGrid), with existing manufacturing models and enterprise information technologies, a new paradigm called cloud manufacturing is proposed by the recent literature. This study presents concepts and ideas of cloud computing and cloud manufacturing. The concept, architecture, core enabling technologies, and typical characteristics of cloud manufacturing are discussed, as well as the difference and relationship between cloud computing and cloud manufacturing. The research is based on mixed qualitative and quantitative methods, and a case study. The case is a prototype of cloud manufacturing solution, which is software platform cooperated by ATR Soft Oy and SW Company China office. This study tries to understand the practical impacts and challenges that are derived from cloud manufacturing. The main conclusion of this study is that cloud manufacturing is an approach to achieve the transformation from traditional production-oriented manufacturing to next generation service-oriented manufacturing. Many manufacturing enterprises are already using a form of cloud computing in their existing network infrastructure to increase flexibility of its supply chain, reduce resources consumption, the study finds out the shift from cloud computing to cloud manufacturing is feasible. Meanwhile, the study points out the related theory, methodology and application of cloud manufacturing system are far from maturity, it is still an open field where many new technologies need to be studied.