Mineraalisen rakennusjätteen hyötykäyttö maarakentamisessa

Työn tavoitteena on osoittaa betonimurskeen ympäristökelpoisuus maarakennuskäytössä sekä vertailla betonimurskeen ja luonnonmateriaalien elinkaaren aikaisia ympäristövaikutuksia maarakentamisessa. Teoriaosassa käsitellään betonimurskeen maarakennuskäyttöön vaikuttavaa lainsäädäntöä ja sen mahdollisia ympäristövaikutuksia. Lisäksi käydään läpi neitseellisten maarakennusmate-riaalien otosta aiheutuvia ympäristövaikutuksia. Työn kokeellinen osa koostuu kahdesta osasta: materiaalien haitallisten aineiden liukoisuuden mää-rityksistä ja elinkaariarvioinnista. Liukoisuuden määritykset tehtiin kenttäkokeina luonnonolosuhteissa Lahden tiede- ja yrityspuisto Oy:n Jokimaan pilot-luokan maaperätutkimuskeskuksessa. Lisäksi liukoisuudet määritettiin laboratoriossa valtioneuvoston asetuksen eräiden jätteiden hyödyntämisestä maarakentamisessa vaatimusten mukaisesti. Elinkaariarvioinnissa vertailtiin betonimursketta neitseellisiin maarakennusmateriaaleihin skenaarioissa, jotka sisälsivät materiaalin valmistuksen ja kuljetuksen käyttökohteeseen. Neitseellisiä materiaaleja käytettäessä oletettiin, että betoni loppusijoitetaan kaatopaikalle. Elinkaariarvioinnissa käytettiin Gabi-elinkaarimallinnusohjelmaa ja skenaarioita vertailtiin hiilidioksidiekvivalenttipäästöihin. Lisäksi elinkaariarviointiin otettiin mukaan vielä kehitysvaiheessa oleva menetelmä maankäytön indikaattoreiden määrittämiseen. Menetelmällä tutkittiin soranoton vaikutusta soraharjun maaperän laadulle ennen ja jälkeen soranoton. Tulokseksi liukoisuuden määrityksistä saatiin, että betonimurskekerroksen läpi suotautuneen sade-veden pH nousee hyvin emäksiseksi. pH:n nousu vaikuttaisi korreloivan positiivisesti tiettyjen metallien liukoisuuteen. Huomattavaa on, että kenttäkokeiden liukoisuudet ja laboratoriossa määritetyt liukoisuudet poikkesivat joltain osin toisistaan. Elinkaaritarkastelussa hiilidioksidiekvivalentti päästöjen suhteen suurin päästö aiheutuu, jos betoni loppusijoitetaan kaatopaikalle hyötykäytön sijaan. Maaperän laadun muutoksien määrittämisen menetelmä ei vielä ole käyttökelpoinen lähtötietojen yksinkertaistuksien ja puutteiden takia. Betonimurskeen hyötykäyttö maarakentamisessa ei aiheuta merkittäviä ympäristövaikutuksia, kun altistus vedelle minimoidaan. Lisäksi hyötykäyttö on suositeltava vaihtoehto loppusijoitukselle kaatopaikan rakentamisen ja käytön aiheuttamien ympäristövaikutusten takia.

Creating an open-books implementation framework for a maintenance-related value-based life-cycle model

This study is a qualitative action research by its nature with elements of personal design in the form of a tangible model implementation framework construction. Utilized empirical data has been gathered via two questionnaires in relation to the arranged four workshop events with twelve individual participants. Five of them represented maintenance customers, three maintenance service providers and four equipment providers respectively. Further, there are two main research objectives in proportion to the two complementary focusing areas of this thesis. Firstly, the value-based life-cycle model, which first version has already been developed prior to this thesis, requires updating in order to increase its real-life applicability as an inter-firm decision-making tool in industrial maintenance. This first research objective is fulfilled by improving appearance, intelligibility and usability of the above-mentioned model. In addition, certain new features are also added. The workshop participants from the collaborating companies were reasonably pleased with made changes, although further attention will be required in future on the model’s intelligibility in particular as main results, charts and values were all reckoned as slightly hard to understand. Moreover, upgraded model’s appearance and added new features satisfied them the most. Secondly and more importantly, the premises of the model’s possible inter-firm implementation process need to be considered. This second research objective is delivered in two consecutive steps. At first, a bipartite open-books supported implementation framework is created and its different characteristics discussed in theory. Afterwards, the prerequisites and the pitfalls of increasing inter-organizational information transparency are studied in empirical context. One of the main findings was that the organizations are not yet prepared for network-wide information disclosure as dyadic collaboration was favored instead. However, they would be willing to share information bilaterally at least. Another major result was that the present state of companies’ cost accounting systems will definitely need implementation-wise enhancing in future since accurate and sufficiently detailed maintenance data is not available. Further, it will also be crucial to create supporting and mutually agreed network infrastructure. There are hardly any collaborative models, methods or tools currently in usage. Lastly, the essential questions about mutual trust and predominant purchasing strategies are cooperation-wise important. If inter-organizational activities are expanded, a more relational approach should be favored in this regard. Mutual trust was also recognized as a significant cooperation factor, but it is hard to measure in reality.

Sustainable Gold Mining- Life Cycle Assessment of Cyanidation and Thiosulphate Leaching

With the increasing concern of the sustainable approach of gold mining, thiosulphate has been researched as an alternative lixiviant to cyanide since cyanide is toxic to the environment. In order to investigate the possibility of thiosulphate leaching application in the coming future, life cycle assessment, is conducted to compare the environmental footprint of cyanidation and thiosulphate leaching. The result showed the most significant environmental impact of cyanidation is toxicity to human, while the ammonia of thiosulphate leaching is also a major concern of acidification. In addition, an ecosystem evaluation is also performed to indicate the potential damages caused by an example of cyanide spill at Kittilä mine, resulting in significant environmental risk cost that has to be taken into account for decision making. From the opinion collected from an online LinkedIn discussion forum, the anxiety of sustainability alone would not be enough to contribute a significant change of conventional cyanidation, until the tighten policy of cyanide use. International Cyanide Code, therefore, is crucial for safe gold production. Nevertheless, it is still thoughtful to consider the values of healthy ecosystem and the gold for long-term benefit.

The requirements of a feasible plastic packaging material for cultured dairy products

The objective of this Master´s Thesis was to conduct a wide scale preliminary survey regarding the package requirements of a cultured dairy package, and to compare the currently used material polystyrene to other suitable packaging materials. Polystyrene has a long history of use in dairy cups, but in recent years its price has increased significantly compared to other common packaging materials. The overall environmental effects of a package and a package material are today a part of designing a sustainable product life cycle. In addition, in certain contexts there has been discussion of the risks posed by styrene polymer for the environment and for humans. These risks are also discussed in this thesis. Polystyrene (PS) is still the most widely used material in dairy cups. In recent years, polypropylene (PP) cups have appeared in increasing numbers on market shelves. This study focuses on the differences of the suitable polymers and examines the suitability of alternative “suitable” polymers with regards to dairy packaging. Aside from focusing on the cup manufacturer, this thesis also examines its subject matter from the viewpoint of the dairy customer, as well as observing the concrete implications of material changes in the overall value chain. It was known in advance that material permeability would be one of the determining factors and that gas transmission testing would be a significant part of the thesis. Mechanical tests were the second part of the testing process, providing information regarding package strength and protectiveness during the package’s life cycle. Production efficiency, along with uninterrupted stable production, was another important factor that was taken into consideration. These two issues are sometimes neglected in similar contexts due to their self-evident nature. In addition, materials used in production may have a surprising significance to the production and efficiency. Consistent high quality is also partly based on material selection. All of the aforementioned factors have been documented and the results have been analyzed by the development team at Coveris Rigid Finland. Coveris is now calculating the total finance effects and capacities should the material changes be implemented in practice. There are many factors in favor of switching to polypropylene at the moment. The overall production costs, as well as the environmental effects of resin production are the primary influences for said switch from the converters’ perspective.

Prosessiautomaatio pinnankorkeusmittauksen koelaitteistoissa

Pinnankorkeuden tunteminen kiehutusvesireaktorin painesäiliössä on erittäin tärkeää sen turvallisuusvaikutusten takia. Pinnankorkeutta mitataan vesipatsaiden korkeutta havaitsevien paine-eromittausten avulla. Säteilyturvakeskuksen YVL-ohjeiden mukaan turvallisuuteen vaikuttavien mittausten täytyy noudattaa moninkertaistus- ja erilaisuusperiaatteita. Yleensä erilaisuusperiaatetta on toteutettu käyttämällä erityyppisiä paine-eromittareita, mutta erilaisella fysikaalisella toimintaperiaatteella oleva mittaus olisi parempi ja toteuttaisi paremmin erilaisuusperiaatetta. Uimurikytkin olisi tällainen fysikaalisesti eri periaatteeseen perustuva pinnankorkeuden mittauslaite. Ydinvoimalaan tarkoitettu teknologia tulee kelpoistaa riippumattoman tahon toimesta ennen käyttöönottoa. Kelpoistamiskokeita varten Lappeenrannan teknillisen yliopiston Ydinturvallisuuden tutkimusyksikköön rakennettiin vuosina 2011–2013 kaksi koelaitteistoa. Näillä koelaitteistoilla tutkittiin uimurikytkimien toimintaa ja ominaisuuksia erilaisissa kiehutusvesireaktorin käyttötilanteissa. Koelaitteistot tarvitsivat toimiakseen automaatiojärjestelmät, jotka suunniteltiin pääosin noudattamalla suunnittelun elinkaarimallia sekä automaatiosuunnittelun sisältökokonaisuuksia. Automaatiojärjestelmien suunnittelu aloitettiin määrittelemällä koejärjestelyjen asettamat vaatimukset, jonka jälkeen tehtiin teknologiavalinnat. Seuraavaksi suunniteltiin automaatiojärjestelmien logiikkaohjelmistot, joiden kuvaukseen tämä työ pääasiassa keskittyy. Logiikkaohjelmistot toteutettiin graafisella National Instruments LabView -ohjelmointikielellä. Logiikkaohjelmistojen tuli hoitaa tiedonkeruuta, käyttöautomaatiota, turvallisuustehtäviä sekä kokeisiin liittyviä erikoistehtäviä. Ohjelmistot saatiin esikokeiden aikana toimimaan halutusti, ja varsinaiset kokeet voitiin suorittaa ilman merkittäviä ongelmia.

The Cycle Times of Working Capital: Financial Value Chain Analysis Method

Interest towards working capital management increased among practitioners and researchers because the financial crisis of 2008 caused the deterioration of the general financial situation. The importance of managing working capital effectively increased dramatically during the financial crisis. On one hand, companies highlighted the importance of working capital management as part of short-term financial management to overcome funding difficulties. On the other hand, in academia, it has been highlighted the need to analyze working capital management from a wider perspective namely from the value chain perspective. Previously, academic articles mostly discussed working capital management from a company-centered perspective. The objective of this thesis was to put working capital management in a wider and more academic perspective and present case studies of the value chains of industries as instrumental in theoretical contributions and practical contributions as complementary to theoretical contributions and conclusions. The principal assumption of this thesis is that selffinancing of value chains can be established through effective working capital management. Thus, the thesis introduces the financial value chain analysis method which is employed in the empirical studies. The effectiveness of working capital management of the value chains is studied through the cycle time of working capital. The financial value chain analysis method employed in this study is designed for considering value chain level phenomena. This method provides a holistic picture of the value chain through financial figures. It extends the value chain analysis to the industry level. Working capital management is studied by the cash conversion cycle that measures the length (days) of time a company has funds tied up in working capital, starting from the payment of purchases to the supplier and ending when remittance of sales is received from the customers. The working capital management practices employed in the automotive, pulp and paper and information and communication technology industries have been studied in this research project. Additionally, the Finnish pharmaceutical industry is studied to obtain a deeper understanding of the working capital management of the value chain. The results indicate that the cycle time of working capital is constant in the value chain context over time. The cash conversion cycle of automotive, pulp and paper, and ICT industries are on average 70, 60 and 40 days, respectively. The difference is mainly a consequence of the different cycle time of inventories. The financial crisis of 2008 affected the working capital management of the industries similarly. Both the cycle time of accounts receivable and accounts payable increased between 2008 and 2009. The results suggest that the companies of the automotive, pulp and paper and ICT value chains were not able to self-finance. Results do not indicate the improvement of value chains position in regard to working capital management either. The findings suggest that companies operating in the Finnish pharmaceutical industry are interested in developing their own working capital management, but collaboration with the value chain partners is not considered interesting. Competition no longer occurs between individual companies, but between value chains. Therefore the financial value chain analysis method introduced in this thesis has the potential to support value chains in improving their competitiveness.

Evaluating land-use related environmental impacts of biomass value chains for decision-support : Comparison and testing of methodologies proposed for environmental life cycle assessment

Life cycle assessment (LCA) is one of the most established quantitative tools for environmental impact assessment of products. To be able to provide support to environmentally-aware decision makers on environmental impacts of biomass value-chains, the scope of LCA methodology needs to be augmented to cover landuse related environmental impacts. This dissertation focuses on analysing and discussing potential impact assessment methods, conceptual models and environmental indicators that have been proposed to be implemented into the LCA framework for impacts of land use. The applicability of proposed indicators and impact assessment frameworks is tested from practitioners' perspective, especially focusing on forest biomass value chains. The impacts of land use on biodiversity, resource depletion, climate change and other ecosystem services is analysed and discussed and the interplay in between value choices in LCA modelling and the decision-making situations to be supported is critically discussed. It was found out that land use impact indicators are necessary in LCA in highlighting differences in impacts from distinct land use classes. However, many open questions remain on certainty of highlighting actual impacts of land use, especially regarding impacts of managed forest land use on biodiversity and ecosystem services such as water regulation and purification. The climate impact of energy use of boreal stemwood was found to be higher in the short term and lower in the long-term in comparison with fossil fuels that emit identical amount of CO2 in combustion, due to changes implied to forest C stocks. The climate impacts of energy use of boreal stemwood were found to be higher than the previous estimates suggest on forest residues and stumps. The product lifetime was found to have much higher influence on the climate impacts of woodbased value chains than the origin of stemwood either from thinnings or final fellings. Climate neutrality seems to be likely only in the case when almost all the carbon of harvested wood is stored in long-lived wooden products. In the current form, the land use impacts cannot be modelled with a high degree of certainty nor communicated with adequate level of clarity to decision makers. The academia needs to keep on improving the modelling framework, and more importantly, clearly communicate to decision-makers the limited certainty on whether land-use intensive activities can help in meeting the strict mitigation targets we are globally facing.

Supply base development for life-cycle business

Yritysten liiketoimintamallit ovat jatkuvan kehityksen kohteena. Viimeisinä vuosina valmistavien yhtiöiden kiinnostus huolehtia asiakkaistaan koko tuotteen elinkaaren aikana ja tarjota erilaisia palveluita asiakkailleen on kasvanut. Tämän palvelujen laajentumisen myötä myös vaateet yrityksen omaa toimittajakenttää kohtaan ovat muuttuneet. Yritykset eivät kykene tuottamaan kaikkia tuotteistamiaan palveluja itse, jolloin yrityksen toimittajakenttä ja sen kyvykkyydet tuottaa tarvittavia palveluita ovat avainasemassa yrityksen menestystekijänä. Tämän työn teoriaosuudessa on esitelty toimittajakentän hallinnan perusteorioita. Kirjallisuus osuuden lisäksi työssä on hyödynnetty toimintatutkimusta kohdeyrityksessä. Tässä diplomityössä on tutkittu mahdollisia keinoja kehittää organisaation omaa toimintaa ja sekä yrityksen toimittajakenttää niin, että se tukee liiketoimintamallin kehitystä koneenrakennusyrityksestä kohti elinkaariliiketoimintaa. Työssä esitetyt keinot voidaan ottaa käyttöön, joko yksitellen tai kokonaisuutena.

Novel virtual environment and real-time simulation based methods for improving life-cycle efficiency of non-road mobile machinery

Virtual environments and real-time simulators (VERS) are becoming more and more important tools in research and development (R&D) process of non-road mobile machinery (NRMM). The virtual prototyping techniques enable faster and more cost-efficient development of machines compared to use of real life prototypes. High energy efficiency has become an important topic in the world of NRMM because of environmental and economic demands. The objective of this thesis is to develop VERS based methods for research and development of NRMM. A process using VERS for assessing effects of human operators on the life-cycle efficiency of NRMM was developed. Human in the loop simulations are ran using an underground mining loader to study the developed process. The simulations were ran in the virtual environment of the Laboratory of Intelligent Machines of Lappeenranta University of Technology. A physically adequate real-time simulation model of NRMM was shown to be reliable and cost effective in testing of hardware components by the means of hardware-in-the-loop (HIL) simulations. A control interface connecting integrated electro-hydraulic energy converter (IEHEC) with virtual simulation model of log crane was developed. IEHEC consists of a hydraulic pump-motor and an integrated electrical permanent magnet synchronous motorgenerator. The results show that state of the art real-time NRMM simulators are capable to solve factors related to energy consumption and productivity of the NRMM. A significant variation between the test drivers is found. The results show that VERS can be used for assessing human effects on the life-cycle efficiency of NRMM. HIL simulation responses compared to that achieved with conventional simulation method demonstrate the advances and drawbacks of various possible interfaces between the simulator and hardware part of the system under study. Novel ideas for arranging the interface are successfully tested and compared with the more traditional one. The proposed process for assessing the effects of operators on the life-cycle efficiency will be applied for wider group of operators in the future. Driving styles of the operators can be analysed statistically from sufficient large result data. The statistical analysis can find the most life-cycle efficient driving style for the specific environment and machinery. The proposed control interface for HIL simulation need to be further studied. The robustness and the adaptation of the interface in different situations must be verified. The future work will also include studying the suitability of the IEHEC for different working machines using the proposed HIL simulation method.

Design and Drive-Cycle Based Analysis of Direct-Driven Permanent Magnet Synchronous Machine for a Small Urban Use Electric Vehicle

A direct-driven permanent magnet synchronous machine for a small urban use electric vehicle is presented. The measured performance of the machine at the test bench as well as the performance over the modified New European Drive Cycle will be given. The effect of optimal current components, maximizing the efficiency and taking into account the iron loss, is compared with the simple id=0 – control. The machine currents and losses during the drive cycle are calculated and compared with each other.

Effects of life cycle profits on the profitability of industrial heavy duty cranes

The goal of the thesis was to investigate how much after-sales profits a crane sale generates over the life cycle of the crane and the effects of these after-sales profits on the overall profitability of the crane. The thesis utilizes theories about life cycle costing from an equipment and service supplier’s point of view. However, instead of costs, the thesis is focused on the life cycle after-sales profits from maintenance services and spare parts provided for the sold crane. The case study approach was chosen and a total of five cranes from three different segments were investigated. An eight-step life cycle profit calculation model was developed in order to analyze the chosen cases’ life cycle profits systematically. The results of the investigation suggest that the life cycle after-sales profits are significant in value. In the case analyses they accounted for between 20% and 44% of the overall life cycle profits of the case cranes. The after-sales profits should be taken into account already in the pricing when offering a crane to a customer.

Roll-to-roll atomic layer deposition process for flexible electronics applications

Atomic Layer Deposition (ALD) is the technology of choice where very thin and highquality films are required. Its advantage is its ability to deposit dense and pinhole-free coatings in a controllable manner. It has already shown promising results in a range of applications, e.g. diffusion barrier coatings for OLED displays, surface passivation layers for solar panels. Spatial Atomic Layer Deposition (SALD) is a concept that allows a dramatic increase in ALD throughput. During the SALD process, the substrate moves between spatially separated zones filled with the respective precursor gases and reagents in such a manner that the exposure sequence replicates the conventional ALD cycle. The present work describes the development of a high-throughput ALD process. Preliminary process studies were made using an SALD reactor designed especially for this purpose. The basic properties of the ALD process were demonstrated using the wellstudied Al2O3 trimethyl aluminium (TMA)+H2O process. It was shown that the SALD reactor is able to deposit uniform films in true ALD mode. The ALD nature of the process was proven by demonstrating self-limiting behaviour and linear film growth. The process behaviour and properties of synthesized films were in good agreement with previous ALD studies. Issues related to anomalous deposition at low temperatures were addressed as well. The quality of the coatings was demonstrated by applying 20 nm of the Al2O3 on to polymer substrate and measuring its moisture barrier properties. The results of tests confirmed the superior properties of the coatings and their suitability for flexible electronics encapsulation. Successful results led to the development of a pilot scale roll-to-roll coating system. It was demonstrated that the system is able to deposit superior quality films with a water transmission rate of 5x10-6 g/m2day at a web speed of 0.25 m/min. That is equivalent to a production rate of 180 m2/day and can be potentially increased by using wider webs. State-of-art film quality, high production rates and repeatable results make SALD the technology of choice for manufacturing ultra-high barrier coatings for flexible electronics.

3D Mesh Simplification. A survey of algorithms and CAD model simplification tests

Simplification of highly detailed CAD models is an important step when CAD models are visualized or by other means utilized in augmented reality applications. Without simplification, CAD models may cause severe processing and storage is- sues especially in mobile devices. In addition, simplified models may have other advantages like better visual clarity or improved reliability when used for visual pose tracking. The geometry of CAD models is invariably presented in form of a 3D mesh. In this paper, we survey mesh simplification algorithms in general and focus especially to algorithms that can be used to simplify CAD models. We test some commonly known algorithms with real world CAD data and characterize some new CAD related simplification algorithms that have not been surveyed in previous mesh simplification reviews.

Capital investments planning and life cycle simulations for the new valves manufacturing facility in Russia

The focus of the research is on the derivation of the valid and reliable performance results regarding establishment and launching of the new full-scale industrial facility, considering the overall current conditions for the project realization in and out of Russia. The study demonstrates the process of the new facility concept development, with following perfor-mance calculation, comparative analyzes conduction, life-cycle simulations, performance indicators derivation and project`s sustainability evaluation. To unite and process the entire input parameters complexity, regards the interlacing between the project`s internal technical and commercial sides on the one hand, and consider all the specifics of the Russian conditions for doing business on the other hand, was developed the unique model for the project`s performance calculation, simulations and results representation. The complete research incorporates all corresponding data to substantiate the assigned facility`s design, sizing and output capacity for high quality and cost efficient ferrous pipe-line accessories manufacturing, as well as, demonstrates that this project could be suc-cessfully realized in current conditions in Russia and highlights the room for significant performance and sustainability improvements based on the indexes of the derived KPIs.