Improving product profitability control in continuous IT-services

The target of the thesis is to improve product profitability control in continuous IT-services. Accurate product cost accounting and correctly allocated revenues are a necessity for good product profitability control. The focus of the study is on costs and revenues that are not traced directly to services. The thesis is focused on revenue allocations as revenue allocation methods have not been used in the case company before. In order to achieve the target revenue allocation methods, which improve the product profitability accounting and control, are presented. The research methods used in the thesis are literature review and empirical case study. The research approach is constructive. The theoretical part is composed of literature and articles that create a base for the empirical part. Internal interviews describe the current situation in the company and based on it development actions are planned. The part of the empirical case study is seen mostly in the limitations as the research is limited to concern only one department in the company. Problems in the revenue tracing are caused by customer specific services and lack of service definitions because of which the revenues are not traced correctly. Methods to allocate revenues are presented in the thesis and stand-alone revenue allocation method is the most suitable one because it is fair and it can be modified. Approximate product profitability analysis is done in the thesis and the results of it indicate that some services are profitable and some unprofitable.

A multibody dynamic model of the cross-country ski-skating technique

The objective of this thesis is the development of a multibody dynamic model matching the observed movements of the lower limb of a skier performing the skating technique in cross-country style. During the construction of this model, the formulation of the equation of motion was made using the Euler - Lagrange approach with multipliers applied to a multibody system in three dimensions. The description of the lower limb of the skate skier and the ski was completed by employing three bodies, one representing the ski, and two representing the natural movements of the leg of the skier. The resultant system has 13 joint constraints due to the interconnection of the bodies, and four prescribed kinematic constraints to account for the movements of the leg, leaving the amount of degrees of freedom equal to one. The push-off force exerted by the skate skier was taken directly from measurements made on-site in the ski tunnel at the Vuokatti facilities (Finland) and was input into the model as a continuous function. Then, the resultant velocities and movement of the ski, center of mass of the skier, and variation of the skating angle were studied to understand the response of the model to the variation of important parameters of the skate technique. This allowed a comparison of the model results with the real movement of the skier. Further developments can be made to this model to better approximate the results to the real movement of the leg. One can achieve this by changing the constraints to include the behavior of the real leg joints and muscle actuation. As mentioned in the introduction of this thesis, a multibody dynamic model can be used to provide relevant information to ski designers and to obtain optimized results of the given variables, which athletes can use to improve their performance.

Dynaamisen lämmönsiirtomallin kehittäminen

Dynaamisia simulointimalleja tarvitaan, jotta voidaan tarkastella järjestelmän käyttäytymistä ajan funktiona. Simulointimallilla voidaan simuloida järjestelmän lähtö erilaisilla herätteillä. Mallin avulla saadaan myös tarkempi käsitys järjestelmästä ja sen osa-alueista, koska simulointimallista voidaan tarkastella sellaisia asioita, jotka voivat olla oikeasta järjestelmästä vaikeasti mitattavia. Tässä työssä kehitetään LUT Energian hyötysuhdemittapaikan keskikokoista kalorimetriä approksimoiva dynaaminen lämmönsiirtomalli käyttäen Matlab® Simulink -ohjelmistoa. Kehitetyn lämmönsiirtomallin tarkkuutta arvioidaan todellisella järjestelmällä tehdyillä mittauksilla. Työssä käytetään karkeita approksimaatioita, jotka tulee korvata tarkemmilla matemaattisilla malleilla jatkokehitystä varten. Työssä kehitetty dynaaminen lämmönsiirtomalli approksimoi todellisen järjestelmän vastetta lämmitysvaiheessa keskimääräisenvirheen ±0,19 °C tarkkuudella.

Heat transfer inside internal combustion engine: modelling and comparison with experimental data

The paper is devoted to study specific aspects of heat transfer in the combustion chamber of compression ignited reciprocating internal combustion engines and possibility to directly measure the heat flux by means of Gradient Heat Flux Sensors (GHFS). A one – dimensional single zone model proposed by Kyung Tae Yun et al. and implemented with the aid of Matlab, was used to obtain approximate picture of heat flux behavior in the combustion chamber with relation to the crank angle. The model’s numerical output was compared to the experimental results. The experiment was accomplished by A. Mityakov at four stroke diesel engine Indenor XL4D. Local heat fluxes on the surface of cylinder head were measured with fast – response, high – sensitive GHFS. The comparison of numerical data with experimental results has revealed a small deviation in obtained heat flux values throughout the cycle and different behavior of heat flux curve after Top Dead Center.

The role of potassium in the corrosion of superheater materials in boilers firing biomass

Inhibition of global warming has become one of the major goals for the coming decades. A key strategy is to replace fossil fuels with more sustainable fuels, which has generated growing interest in the use of waste-derived fuels and of biomass fuels. However, from the chemical point of view, biomass is an inhomogeneous fuel, usually with a high concentration of water and considerable amounts of potassium and chlorine, all of which are known to affect the durability of superheater tubes. To slow down or reduce corrosion, power plants using biomass as fuel have been forced to operate at lower steam temperatures as compared to fossil fuel power plants. This reduces power production efficiency: every 10°C rise in the steam temperature results in an approximate increase of 2% in power production efficiency. More efficient ways to prevent corrosion are needed so that power plants using biomass and waste-derived fuels can operate at higher steam temperatures. The aim of this work was to shed more light on the alkali-induced corrosion of superheater steels at elevated temperatures, focusing on potassium chloride, the alkali salt most frequently encountered in biomass combustion, and on potassium carbonate, another potassium salt occasionally found in fly ash. The mechanisms of the reactions between various corrosive compounds and steels were investigated. Based on the results, the potassium-induced accelerated oxidation of chromia protected steels appears to occur in two consecutive stages. In the first, the protective chromium oxide layer is destroyed through a reaction with potassium leading to the formation of intermediates such as potassium chromate (K2CrO4) and depleting the chromium in the protective oxide layer. As the chromium is depleted, chromium from the bulk steel diffuses into the oxide layer to replenish it. In this stage, the ability of the material to withstand corrosion depends on the chromium content (which affects how long it takes the chromium in the oxide layer to be depleted) and on external factors such as temperature (which affects how fast the chromium diffuses into the protective oxide from the bulk steel). For accelerated oxidation to continue, the presence of chloride appears to be essential.

Paperitehtaan arkittamon kokonaistehokkuuden nostaminen kunnossapitoa kehittämällä

Tämän diplomityön tavoitteena oli tutkia, miten UPM:n Kymin tehtaan A4- arkittamon kunnossapitotoimintaa pystyttäisiin kehittämään niin, että tuotantolaitoksen kokonaistehokkuutta saataisiin kasvatettua. Työssä on pohdittu keinoja nykyisen, pääasiallisesti korjaavan kunnossapitotoiminnan muuttamiseksi suunnitelmalliseksi eri teorialähtökohtien pohjalta. Keskeinen teoria, johon työn tulokset pohjautuvat, on kokonaisvaltainen tuottava kunnossapito (TPM). Kirjallisuuslähteisiin tukeutuvaa tutkimusta täydensivät useat haastattelut, A4-valmistajille suunnattu laitteiden kuntokartoituskysely ja tuotannon- ja toiminnanohjausjärjestelmistä kerätty mittausaineisto. Työn merkittävimmät tulokset osoittavat, että A4-arkittamon kunnossapitotoimintaa tulisi suunnata nykyistä enemmän käyttökunnossapitolähtöiseksi. Käyttökunnossapito perustuu tuotannon operaattoreiden osallistumiseen kunnossapitotoimiin varsinaisen kunnossapitohenkilöstön ohella. Tuotantooperaattoreilla on työnsä vuoksi parhaat mahdollisuudet käyttämiensä laitteiden kunnonvalvontaan ja näin ollen mahdollisten vikaantumisten ennakointiin jo varhaisessa vaiheessa. Ennakoimalla pystyttäisiin parantamaan kunnossapidon suunnitelmallisuutta, minkä ansiosta laitteiden käytettävyys ja sitä kautta tuotantolaitoksen kokonaistehokkuus olisivat nykyistä korkeampia.

Universal Quantum Cloning

After introducing the no-cloning theorem and the most common forms of approximate quantum cloning, universal quantum cloning is considered in detail. The connections it has with universal NOT-gate, quantum cryptography and state estimation are presented and briefly discussed. The state estimation connection is used to show that the amount of extractable classical information and total Bloch vector length are conserved in universal quantum cloning. The 1  2 qubit cloner is also shown to obey a complementarity relation between local and nonlocal information. These are interpreted to be a consequence of the conservation of total information in cloning. Finally, the performance of the 1  M cloning network discovered by Bužek, Hillery and Knight is studied in the presence of decoherence using the Barenco et al. approach where random phase fluctuations are attached to 2-qubit gates. The expression for average fidelity is calculated for three cases and it is found to depend on the optimal fidelity and the average of the phase fluctuations in a specific way. It is conjectured to be the form of the average fidelity in the general case. While the cloning network is found to be rather robust, it is nevertheless argued that the scalability of the quantum network implementation is poor by studying the effect of decoherence during the preparation of the initial state of the cloning machine in the 1 ! 2 case and observing that the loss in average fidelity can be large. This affirms the result by Maruyama and Knight, who reached the same conclusion in a slightly different manner.

Scalable algorithms for height field illumination

Global illumination algorithms are at the center of realistic image synthesis and account for non-trivial light transport and occlusion within scenes, such as indirect illumination, ambient occlusion, and environment lighting. Their computationally most difficult part is determining light source visibility at each visible scene point. Height fields, on the other hand, constitute an important special case of geometry and are mainly used to describe certain types of objects such as terrains and to map detailed geometry onto object surfaces. The geometry of an entire scene can also be approximated by treating the distance values of its camera projection as a screen-space height field. In order to shadow height fields from environment lights a horizon map is usually used to occlude incident light. We reduce the per-receiver time complexity of generating the horizon map on N N height fields from O(N) of the previous work to O(1) by using an algorithm that incrementally traverses the height field and reuses the information already gathered along the path of traversal. We also propose an accurate method to integrate the incident light within the limits given by the horizon map. Indirect illumination in height fields requires information about which other points are visible to each height field point. We present an algorithm to determine this intervisibility in a time complexity that matches the space complexity of the produced visibility information, which is in contrast to previous methods which scale in the height field size. As a result the amount of computation is reduced by two orders of magnitude in common use cases. Screen-space ambient obscurance methods approximate ambient obscurance from the depth bu er geometry and have been widely adopted by contemporary real-time applications. They work by sampling the screen-space geometry around each receiver point but have been previously limited to near- field effects because sampling a large radius quickly exceeds the render time budget. We present an algorithm that reduces the quadratic per-pixel complexity of previous methods to a linear complexity by line sweeping over the depth bu er and maintaining an internal representation of the processed geometry from which occluders can be efficiently queried. Another algorithm is presented to determine ambient obscurance from the entire depth bu er at each screen pixel. The algorithm scans the depth bu er in a quick pre-pass and locates important features in it, which are then used to evaluate the ambient obscurance integral accurately. We also propose an evaluation of the integral such that results within a few percent of the ray traced screen-space reference are obtained at real-time render times.

Building a Research Data Registry for the UK

Presentation at Open Repositories 2014, Helsinki, Finland, June 9-13, 2014

Tag Cloud of Search Queries for Repository System

Poster at Open Repositories 2014, Helsinki, Finland, June 9-13, 2014

The estimation of tuberculosis transmission parameters using ABC and MCMC methods

The aim of this work is to apply approximate Bayesian computation in combination with Marcov chain Monte Carlo methods in order to estimate the parameters of tuberculosis transmission. The methods are applied to San Francisco data and the results are compared with the outcomes of previous works. Moreover, a methodological idea with the aim to reduce computational time is also described. Despite the fact that this approach is proved to work in an appropriate way, further analysis is needed to understand and test its behaviour in different cases. Some related suggestions to its further enhancement are described in the corresponding chapter.

Magnetization studies of polystyrene/multiwall carbon nanotube composite films

Lappeenranta University of Technology School of Technology Technical Physics Evgenii Zhukov MAGNETIZATION STUDIES OF POLYSTYRENE/MULTIWALL CARBON NANOTUBE COMPOSITE FILMS Master’s thesis 2015 55 pages, 41 pictures, 9 Tables. Examiners: Professor Erkki Lähderanta D.Sc. Ivan Zakharchuk Keywords: polystyrene, multi-walled carbon nanotubes, MWCNT, composite, magnetization, SQUID. In this thesis magnetic properties of polystyrene/multiwall carbon nanotube (MWCNT) composites are investigated with Quantum Design SQUID magnetometer (MPMS XL). The surface of the composite films is studied via BRUKER Multimode 8 Atomic Force Microscope, as well. The polystyrene/MWCNT composites have been prepared by the group of professor Okotrub (Physics Chemistry of Nanomaterials laboratory, Nikolaev Institute of Inorganic Chemistry, Russia). The composite films have been prepared by solution processing and stretching method. The approximate length and inner diameter of the MWCNTs used in fabrication are 260 μm and 10 nm, respectively. The content of MWCNTs is 1 and 2.5 contents percent (wt%) for studied samples. The stretching of the samples is 30% for samples with 1 and 2.5 wt% content, and one sample with 1 wt% loading of MWCNTs is 100% stretched. MWCNTs aligned perpendicular to a silicon substrate are used as a reference sample. The magnetization field dependencies of the samples exhibit hysteresis behavior. The values of saturation magnetization of composite films are much less compared to that of the reference sample. The saturation magnetization coercitivity field value drops with decrease of MWCNT content. At high magnetic fields strong presence of diamagnetism is observed. Measurements in magnetic field parallel and perpendicular to the composite plate display anisotropy with respect to the direction of stretching. Temperature dependences of magnetization for all samples display difference between zero-field cooled and field-cooled curves of magnetization. This divergence confirms the presence of magnetic interactions in the material. The atomic force microscopy study of the composites’ surfaces revealed that they are relatively smooth and the nanotubes are aligned with the axis of stretching to some extent. 

Aktiivisten magneettilaakereiden ohjauslaitteiston vaatimusmäärittely ja toteutus

Aktiivinen magneettilaakeri on järjestelmä joka mahdollistaa pyörivän kappaleen, esimerkiksi sähkökoneen roottorin, leijuttamisen magneettikentässä ilman fyysistä kontaktia vastakappaleiden välillä. Tekniikalla on joitain merkittäviä etuja muihin laakerointijärjestelmiin verrattuna erityisesti suurnopeuksisissa tai puhdastiloissa käytettävissä sähkökäytöissä. Magneettilaakereiden yleistymistä nopeuttaisi ja niiden hintaa laskisi mikäli laakereiden säätöön ja tehonsyöttöön voitaisiin käyttää standardeja teollisuusautomaatiolaitteita erityisesti tätä käyttötarkoitusta varten kehitettyjen laitteiden sijaan. Tässä työssä luodaan menetelmä määrittää vähimmäisvaatimukset aktiivisen magneettilaakerin säätöalgoritmien suorittamiseen käytetylle säätöjärjestelmälle ja anturoinnille sekä laakerin toimintaan tarvittavalle tehoelektroniikalle. Näiden vaatimusten perusteella luodaan katsaus soveltuviin laitteisiin ja kootaan esimerkkikokoonpanot kahdelle erilaiselle magneettilaakeroitavalle kohteelle. Lisäksi työssä esitellään LUT:ssa vuosina 2014-2015 kehitetty magneettilaakerin teholähdeprototyyppi ja selvitetään edellytykset käyttää laitetta laakerijärjestelmän osana.

Toward a Reliable Classifier For Arrhythmia Diagnosis

Illnesses related to the heart are one of the major reasons for death all over the world causing many people to lose their lives in last decades. The good news is that many of those sicknesses are preventable if they are spotted in early stages. On the other hand, the number of the doctors are much lower than the number of patients. This will makes the auto diagnosing of diseases even more and more essential for humans today. Furthermore, when it comes to the diagnosing methods and algorithms, the current state of the art is lacking a comprehensive study on the comparison between different diagnosis solutions. Not having a single valid diagnosing solution has increased the confusion among scholars and made it harder for them to take further steps. This master thesis will address the issue of reliable diagnosing algorithm. We investigate ECG signals and the relation between different diseases and the heart’s electrical activity. Also, we will discuss the necessary steps needed for auto diagnosing the heart diseases including the literatures discussing the topic. The main goal of this master thesis is to find a single reliable diagnosing algorithm and quest for the best classifier to date for heart related sicknesses. Five most suited and most well-known classifiers, such as KNN, CART, MLP, Adaboost and SVM, have been investigated. To have a fair comparison, the ex-periment condition is kept the same for all classification methods. The UCI repository arrhythmia dataset will be used and the data will not be preprocessed. The experiment results indicates that AdaBoost noticeably classifies different diseases with a considera-bly better accuracy.

Materiaalitarvelaskenta, varastonhallinta ja tilausten optimointi - Case pienpanimo

Tämä kandidaatintutkielma tarkastelee, mitkä tekijät vaikuttavat teollisuusyrityksen varastonhallinnan ja materiaalinohjauksen kokonaiskustannuksiin. Kokonaistavoitteena on tunnistaa kohdeyritykselle sopivat varaston- ja materiaalinohjauksen menetelmät sekä tunnistaa kehityskohteita tulevaisuuden kehittämistä varten. Tutkielman teoriaosassa käsitellään varastoinnin motiiveja, kustannustekijöitä ja erilaisia täydennysmenetelmiä sekä esitetään materiaalitarvelaskennan perusteita. Tältä pohjalta tutkielman empiirisessä osiossa tutkitaan kolmen eri raaka-ainetoimittajan osalta tilattavien nimikkeiden vuosikustannusten komponentit erilaisilla vuositilauslukumäärillä ja tilauseräko’oilla. Tuloksena kustannuskomponenttien tarkastelusta saadaan suuntaa antavat vuosikustannukset eri tilausmäärillä tai tilausväleillä. Tulokset pohjautuvat kuitenkin hyvin yksinkertaistettuihin taustaoletuksiin, joten suoraan tulosten pohjalta ei tule toimintatapoja muodostaa. Tutkielman perusteella voidaan todeta, että varastonhallinnan tekijät ovat keskenään ristiriitaisia, mutta oikein valituilla menetelmillä voidaan saavuttaa taloudellisia säästöjä ja kehittää toimintaa sujuvammaksi. Erityisesti materiaalitarvelaskentaan siirtyminen materiaalinhallinnassa ja ajantasainen varastokirjanpito tunnistettiin tärkeiksi jatkokehityskohteiksi.