Wireless Authentication and Authorization, case Wireless Access Control System

Lyhyen kantaman radiotekniikoiden hyödyntäminen mahdollistaa uudenlaisten paikallisten palveluiden käytön ja vanhojen palveluiden kehittämisen. Kulunvalvonta on päivittäisenä palveluna valittu työn esimerkkisovellukseksi. Useita tunnistus- ja valtuutustapoja tutkitaan, ja julkisen avaimen infrastruktuuri on esitellään tarkemmin. Langattomat tekniikat Bluetooth, Zigbee, RFID ja IrDA esitellän yleisellä tasolla langattomat tekniikat –luvussa. Bluetooth-tekniikan rakennetta, mukaan lukien sen tietoturva-arkkitehtuuria, tutkitaan tarkemmin. Bluetooth-tekniikkaa käytetään työssä suunnitellun langattoman kulunvalvontajärjestelmän tietojen siirtoon. Kannettava päätelaite toimii käyttäjän henkilökohtaisena luotettuna laitteena, jota voi käyttää avaimena. Käyttäjän tunnistaminen ja valtuuttaminen perustuu julkisen avaimen infrastruktuuriin. Ylläpidon allekirjoittamat varmenteet sisältävät käyttäjän julkisen avaimen lisäksi tietoa hänestä ja hänen oikeuksistaan. Käyttäjän tunnistaminen kulunvalvontapisteissä tehdään julkisen ja salaisen avaimen käyttöön perustuvalla haaste-vastaus-menetelmällä. Lyhyesti, järjestelmässä käytetään Bluetooth-päätelaitteita langattomina avaimina.

High Performance Electrical Drive System for a Biomechanical Test and Rehabilitation Equipment

Suunniteltiin ja rakennettiin suoraa vääntömomenttisäätöä soveltava taajuudenmuuttajakäyttö oikosulkumoottorin ohjaukseen korvaamaan passiivinen jarrukäyttö. Laite on kuntoutuslaite, jolla tehdään lihasvoiman mittauksia ja voimaharjoituksia. Selvitettiin kaupallisten moottoreiden ja taajuudenmuuttajien suoritusominaisuuksia ja tämän perusteella valittiin käyttöön sopivat laitteet. Työssä esitetään kaksi oikosulkumoottorin ohjaustapaa: vektorisäätö ja suora vääntömomenttisäätö. Merkittävin osa tästä työstä käsittelee - tarkan turvallisuussuunnitelman lisäksi - kuntoutuslaitteen prototyypin komponentteja, kokoamista ja suoritustestien tuloksia.

Bluetooth wireless technology based guidance system

Lyhyen kantaman langattomat kommunikaatioteknologiat tarjoavat mahdollisuuden toteuttaa erilaisia paikkasidonnaisia palveluita käyttäjille kohtuullisilla kustannuksilla. Opastejärjestelmä, joka ohjaa käyttäjän paikasta toiseen, on yksi tälläinen palvelu. Tässä työssä esitetään langattomaan Bluetooth teknologiaan perustuva opastejärjestelmä. Muita langattomia teknologioita verrataan Bluetoothiin opastejärjestelmän toteuttamisen kannalta. Erilaisia järjestelmän arkkitehtuuri vaihtoehtoja käyttäjän paikantamiseen esitellään. Paikkatietoja hyödynnetään opasteviestin muodostamisessa. Tapoja muodostaa käyttäjän reitti kahden paikan välillä toimistorakennuksessa esitetään. Työn tulos on halpa langatonta Bluetooth teknologiaa hyödyntävä opastejärjestelmä, jota voidaan käyttää myös muiden langattomien paikkasidonnaisten palveluiden tuottamiseen.

Success Factors of an Enterprise Resource Planning System

Työn tarkoituksena oli tutkia yrityksen eri yksiköiden toiminnaohjausjärjestelmiä sekä verrata niiden menestystekijöitä Adelakunin malliin tietojärjestelmien laatuulottuvuuksista. Siinä järjestelmän kokonaislaatu jaetaan liiketoiminnalliseen, tekniseen ja käyttäjän kokemaan laatuun. Tulosten perusteella oli myös tavoitteena kehittää kyseisen toiminnanojausjärjestelmän kehittämistä varten malli onnistumistekijöiden keskinäisestä riippuvuudesta. Tutkittavista järjestelmistä ja niiden käytöstä kerättiin tietoja käyttöönottoprojektien dokumentaatiosta, haastatteluin, kyselylomakkein ja järjestelmäanalyysein. Sekä loppukäyttäjät että yritysjohto olivat kyselyjen ja haastattelujen kohderyhmänä. Saatuja tietoja arvioitiin Adelakunin kolmiulotteisen tietojärjestelmän laatutekijämallin mukaisesti ja keskeisiä menestystekijöitä etsittiin. Tutkituissa tapauksissa tietojärjestelmien menestyksen taustalta löytyi alan kirjallisuuden kanssa yhtäpitäviä tekijöitä. Myös Adelakunin laatu-ulottuvuusmalli osoittautui validiksi tutkituissa tapauksissa. Keskeisten menestystekijöiden välisistä vuorovaikutussuhteista rakennettiin malli, jota voidaan hyödyntää kyseisen järjestelmän jatkokehityksessä.

Delivery system for location based information in wireless IP networks

Tämä työ esittelee uuden tarjota paikasta riippuvaa tietoa langattomien tietoverkkojen käyttäjille. Tieto välitetään jokaiselle käyttäjälle tietämättä mitään käyttäjän henkilöllisyydestä. Sovellustason protokollaksi valittiin HTTP, joka mahdollistaa tämän järjestelmän saattaa tietoa perille useimmille käyttäjille, jotka käyttävät hyvinkin erilaisia päätelaitteita. Tämä järjestelmä toimii sieppaavan www-liikenteen välityspalvelimen jatkeena. Erilaisten tietokantojen sisällä on perusteella järjestelmä päättää välitetäänkö tietoa vai ei. Järjestelmä sisältää myös yksinkertaisen ohjelmiston käyttäjien paikantamiseksi yksittäisen tukiaseman tarkkuudella. Vaikka esitetty ratkaisu tähtääkin paikkaan perustuvien mainosten tarjoamiseen, se on helposti muunnettavissa minkä tahansa tyyppisen tiedon välittämiseen käyttäjille.

Offset-print mottling measurement using machine vision

Mottling is one of the key defects in offset-printing. Mottling can be defined as unwanted unevenness of print. In this work, diameter of a mottle spot is defined between 0.5-10.0 mm. There are several types of mottling, but the reason behind the problem is still not fully understood. Several commercial machine vision products for the evaluation of print unevenness have been presented. Two of these methods used in these products have been implemented in this thesis. The one is the cluster method and the other is the band-pass method. The properties of human vision system have been taken into account in the implementation of these two methods. An index produced by the cluster method is a weighted sum of the number of found spots, and an index produced by band-pass method is a weighted sum of coefficients of variations of gray-levels for each spatial band. Both methods produce larger indices for visually poor samples, so they can discern good samples from the poor ones. The difference between the indices for good and poor samples is slightly larger produced by the cluster method. 11 However, without the samples evaluated by human experts, the goodness of these results is still questionable. This comparison will be left to the next phase of the project.

Implementation of counter testing in Nokia Automation System

In this study the performance measurement, a part of the research and development of the RNC, was improved by implementing counter testing to the Nokia Automation System. The automation of counter testing is a feature the customer ordered, because performing counter testing manually is rather complex. The objective was to implement an automated counter testing system, which once configured correctly, would manage to run the testing and perform the analysis. The requirements for the counter testing were first studied. It was investigated if the auto-mation of the feature was feasible in the meetings with the customer. The basic functionality required for the automation was also drawn. The technologies used in the architecture of the Nokia Automation System were studied. Based on the results of the study, a new technology, wxWidgets, was introduced. The new technology was necessary to facilitate the implementing of the required feature. Finally the implementation of the counter testing was defined and implemented. The result of this study was the automation of the counter testing method developed as a new feature for the Nokia Automation System. The feature meets the specifications and requirements set by the customer. The performing of the counter testing feature is totally automated. Only configuration of the test cases is done by the user. The customer has presented new requests to further develop the feature and there are plans by the Nokia Automation System developers to implement those in the near future. The study describes the implementation of the counter testing feature introduced. The results of the study give guidelines for further developing the feature.

Competitor comparison: variable speed drives in pumping applications

As the world’s energy demand is increasing, a durable solution to control it is to improve the energy efficiency of the processes. It has been estimated that pumping applications have a significant potential for energy savings trough equipment or control system changes. For many pumping application the use of a variable speed drive as a process control element is the most energy efficient solution. The main target of this study is to examine the energy efficiency of a drive system that moves the pump. In a larger scale the purpose of this study is to examine how the different manufacturers’ variable speed drives are functioning as a control device of a pumping process. The idea is to compare the drives from a normal pump user’s point of view. The things that are mattering for the pump user are the efficiency gained in the process and the easiness of the use of the VSD. So some thought is given also on valuating the user-friendliness of the VSDs. The VSDs are compared to each other also on the basis of their life cycle energy costs in different kind of pumping cases. The comparison is made between ACS800 from ABB, VLT AQUA Drive from Danfoss, NX-drive from Vacon and Micromaster 430 from Siemens. The efficiencies are measured in power electronics laboratory in the Lappeenranta University of Technology with a system that consists of a variable speed drive, an induction motor with dc-machine, two power analyzers and a torque transducer. The efficiencies are measured as a function of a load at different frequencies. According to measurement results the differences between the measured system efficiencies on the actual working area of pumping are on average few percent units. When examining efficiencies at the whole range of different loads and frequencies, the differences get bigger. At low frequencies and loads the differences between the most efficient and the least efficient systems are at the most about ten percent units. At the most of the tested points ABB’s drive seem to have slightly better efficiencies than the other drives.

Building distributed high availability system

Today’s commercial web sites are under heavy user load and they are expected to be operational and available at all times. Distributed system architectures have been developed to provide a scalable and failure tolerant high availability platform for these web based services. The focus on this thesis was to specify and implement resilient and scalable locally distributed high availability system architecture for a web based service. Theory part concentrates on the fundamental characteristics of distributed systems and presents common scalable high availability server architectures that are used in web based services. In the practical part of the thesis the implemented new system architecture is explained. Practical part also includes two different test cases that were done to test the system's performance capacity.

Design of flywheel generator for a diesel hybrid working machine

The aim of this work is to design a flywheel generator for a diesel hybrid working machine. In this work we perform detailed design of a generator. Mobile machines are commonly used in industry: road building machines, three harvesting machines, boring machines, trucks and other equipment. These machines work with a hydraulic drive system. This system provides good service property and high technical level. Manufacturers of mobile machines tend to satisfy all requirements of customers and modernized drive system. In this work also a description of the frequency inverter is present. Power electronics system is one of the basic parts for structures perform in the project.

Unsupervised visual object categorization

The number of digital images has been increasing exponentially in the last few years. People have problems managing their image collections and finding a specific image. An automatic image categorization system could help them to manage images and find specific images. In this thesis, an unsupervised visual object categorization system was implemented to categorize a set of unknown images. The system is unsupervised, and hence, it does not need known images to train the system which needs to be manually obtained. Therefore, the number of possible categories and images can be huge. The system implemented in the thesis extracts local features from the images. These local features are used to build a codebook. The local features and the codebook are then used to generate a feature vector for an image. Images are categorized based on the feature vectors. The system is able to categorize any given set of images based on the visual appearance of the images. Images that have similar image regions are grouped together in the same category. Thus, for example, images which contain cars are assigned to the same cluster. The unsupervised visual object categorization system can be used in many situations, e.g., in an Internet search engine. The system can categorize images for a user, and the user can then easily find a specific type of image.

Online Community System Development, Case PROFCOM

The purpose of this bachelor's thesis is the development of online community. Nowadays Internet lets user to collaborate and share information online. Internet is also full of communities and the number of community users is continuously rising. Companies have also noticed this and want to make use of it. The result of the work was an online community for the use of PROFCOM research project. At the same time information was gathered about what kind of platforms are available as a backbone for an online community. Designing and developing of the online community provided experience about Drupal-environment. It also gave pros and cons of Drupal’s features. Drupal is a multifunctional software, which can handle big online communities, but its installation and maintenance is, however, reasonably simple.

On Transmission System Design for Wireless Broadcasting

This thesis considers aspects related to the design and standardisation of transmission systems for wireless broadcasting, comprising terrestrial and mobile reception. The purpose is to identify which factors influence the technical decisions and what issues could be better considered in the design process in order to assess different use cases, service scenarios and end-user quality. Further, the necessity of cross-layer optimisation for efficient data transmission is emphasised and means to take this into consideration are suggested. The work is mainly related terrestrial and mobile digital video broadcasting systems but many of the findings can be generalised also to other transmission systems and design processes. The work has led to three main conclusions. First, it is discovered that there are no sufficiently accurate error criteria for measuring the subjective perceived audiovisual quality that could be utilised in transmission system design. Means for designing new error criteria for mobile TV (television) services are suggested and similar work related to other services is recommended. Second, it is suggested that in addition to commercial requirements there should be technical requirements setting the frame work for the design process of a new transmission system. The technical requirements should include the assessed reception conditions, technical quality of service and service functionalities. Reception conditions comprise radio channel models, receiver types and antenna types. Technical quality of service consists of bandwidth, timeliness and reliability. Of these, the thesis focuses on radio channel models and errorcriteria (reliability) as two of the most important design challenges and provides means to optimise transmission parameters based on these. Third, the thesis argues that the most favourable development for wireless broadcasting would be a single system suitable for all scenarios of wireless broadcasting. It is claimed that there are no major technical obstacles to achieve this and that the recently published second generation digital terrestrial television broadcasting system provides a good basis. The challenges and opportunities of a universal wireless broadcasting system are discussed mainly from technical but briefly also from commercial and regulatory aspect

Personal Liberty in Psychiatric Care - Towards Service User Involvement

This study explores personal liberty in psychiatric care from a service user involvement perspective. The data were collected in four phases during the period 2000-2006 in psychiatric settings in Finland. Firstly, patient satisfaction and factors associated with user involvement were studied (n = 313). Secondly, patients’ experiences of deprivation of their liberty were explored (n = 51). Thirdly, an overview on patients’ options for lodging complaints was conducted, and all complaints (n = 4645) lodged in Finland from 2000 to 2004 were examined. Fourthly, the effects of different patient education methods on inpatients’ experiences of deprivation of liberty were tested (n = 311). It emerged that patients were quite satisfied, but reported dissatisfaction in restrictions, compulsory care and information dissemination. Patients experienced restrictions on leaving the ward and on communication, confiscation of property and coercive measures as deprivation of liberty. Patients’ experienced these interventions to be negative. In Finland, the patient complaint process is complicated and not easily accessible. In general, patient complaints increased considerably in Finland during the study period. In psychiatric care the number of complaints was quite stable and complaints led more seldom to consequences. An Internet-based patient education system was equivalent with traditional education and treatment as usual in supporting personal liberty during hospital care. This dissertation provides new information about the realization of patients' rights in psychiatric care. In order to improve patients' involvement, systematic methods to increase personal liberty during care need to be developed, the procedures for patients lodging complaints should be simplified, and patients' access to information needs to be ensured using multiple methods.

Electrical machine in a Hybrid Electrical Vehicle

Hybrid electric vehicles (HEV) have attracted very much attention during the latest years. Increasing environmental concern and an increase in fuel prices are key factors for the growing interest towards the HEV. In a hybrid electric vehicle the power train consists of both a mechanical power system and an electric power transmission system. The major subsystems in the mechanical power system are the internal combustion engine which powers the vehicle; electric power transmission including an energy storage, power electronic inverter, hybrid control system; the electric motor drive that runs either in the generating mode or in the motoring mode to process the power flow between the energy storage and the electrical machine. This research includes two advanced electric motors for a parallel hybrid: induction machine and permanent magnets synchronous machine. In the thesis an induction motor and a permanent magnet motor are compared as propulsion motors. Electric energy storages are also studied.