Very High Energy Gamma-Rays emitting BL LAC's Population Study

Context: BL Lacs are the most numerous extragalactic objects which are detected in Very High Energy (VHE) gamma-rays band. They are a subclass of blazars. Large flux variability amplitude, sometimes happens in very short time scale, is a common characteristic of them. Significant optical polarization is another main characteristics of BL Lacs. BL Lacs' spectra have a continuous and featureless Spectral Energy Distribution (SED) which have two peaks. Among 1442 BL Lacs in the Roma-BZB catalogue, only 51 are detected in VHE gamma-rays band. BL Lacs are most numerous (more than 50% of 514 objects) objects among the sources that are detected above 10 GeV by FERMI-LAT. Therefore, many BL Lacs are expected to be discovered in VHE gamma-rays band. However, due to the limitation on current and near future technology of Imaging Air Cherenkov Telescope, astronomers are forced to predict whether an object emits VHE gamma-rays or not. Some VHE gamma-ray prediction methods are already introduced but still are not confirmed. Cross band correlations are the building blocks of introducing VHE gamma-rays prediction method. Aims: We will attempt to investigate cross band correlations between flux energy density, luminosity and spectral index of the sample. Also, we will check whether recently discovered MAGIC J2001+435 is a typical BL Lac. Methods: We select a sample of 42 TeV BL Lacs and collect 20 of their properties within five energy bands from literature and Tuorla blazar monitoring program database. All of the data are synchronized to be comparable to each other. Finally, we choose 55 pair of datasets for cross band correlations finding and investigating whether there is any correlation between each pair. For MAGIC J2001+435 we analyze the publicly available SWIFT-XRT data, and use the still unpublished VHE gamma-rays data from MAGIC collaboration. The results are compared to the other sources of the sample. Results: Low state luminosity of multiple detected VHE gamma-rays is strongly correlated luminosities in all other bands. However, the high state does not show such strong correlations. VHE gamma-rays single detected sources have similar behaviour to the low state of multiple detected ones. Finally, MAGIC J2001+435 is a typical TeV BL Lac. However, for some of the properties this source is located at the edge of the whole sample (e.g. in terms of X-rays flux). Keywords: BL Lac(s), Population study, Correlations finding, Multi wavelengths analysis, VHE gamma-rays, gamma-rays, X-rays, Optical, Radio

Development of Generic Simulation Model for Mobile Working Machines

This master’s thesis has been done for Drive! –project in which a new electric motor solution for mobile working machines is developed. Generic simulation model will be used as marketing and development tool. It can be used to model a wide variety of different vehicles with and without electric motor and to show customer the difference between traditionally build vehicles and those with new electric motor solution. Customers can also use simulation model to research different solutions for their own vehicles. At the start of the project it was decided that MeVEA software would be used as main simulation program and Simulink will only be used to simulate the operation of electrical components. Development of the generic model started with the research of these two software applications, simulation models which are made with them and how these simulation models can be build faster. Best results were used for building of generic simulation model. Finished generic model can be used to produce new tractor models for real-time simulations in short notice. All information about model is collected to one datasheet which can be easily filled by the user. After datasheet is filled a script will automatically build new simulation model in seconds. At the moment generic model is capable of building simulation models for wide variety of different tractors but it can be easily altered for other vehicle types too which would also benefit greatly from electric drive solution. Those could be for example wheel loaders and harvesters.

Toward including the effect of manufacturing processes in the pre-estimated losses of the switched reluctance motor

The estimation of losses plays a key role in the process of building any electrical machine. How to estimate those losses while designing any machine; by obtaining the characteristic of the electrical steel from the catalogue and calculate the losses. However, this way is inaccurate since the electrical steel performs several manufacturing processes during the process of building any machine, which affects directly the magnetic property of the electrical steel and accordingly the characteristic of the electrical steel will be affected. That means the B–H curve of the steel that was obtained from the catalogue will be changed. Moreover, during loading and rotating the machine, some important changes occur to the B–H characteristic of the electrical steel such as the stress on the laminated iron. Accordingly, the pre-estimated losses are completely far from the actual losses because they were estimated based on the data of the electrical steel obtained from the catalogue. So in order to estimate the losses precisely significant factors of the manufacturing processes must be included. The paper introduces the systematic estimation of the losses including the effect of one of the manufacturing factors. Similarly, any other manufacturing factor can be included in the pre-designed losses estimations.

Modeling a Network of Heat Exchangers

This research work addresses the problem of building a mathematical model for the given system of heat exchangers and to determine the temperatures, pressures and velocities at the intermediate positions. Such model could be used in nding an optimal design for such a superstructure. To limit the size and computing time a reduced network model was used. The method can be generalized to larger network structures. A mathematical model which includes a system of non-linear equations has been built and solved according to the Newton-Raphson algorithm. The results obtained by the proposed mathematical model were compared with the results obtained by the Paterson approximation and Chen's Approximation. Results of this research work in collaboration with a current ongoing research at the department will optimize the valve positions and hence, minimize the pumping cost and maximize the heat transfer of the system of heat exchangers.

Customer Need Assessment for Differentiation in Building Information Modeling

Building Information Modeling – BIM is widely spreading in the Architecture, Engineering, and Construction (AEC) industries. Manufacturers of building elements are also starting to provide more and more objects of their products. The ideal availability and distribution for these models is not yet stabilized. Usual goal of a manufacturer is to get their model into design as early as possible. Finding the ways to satisfy customer needs with a superior service would help to achieve this goal. This study aims to seek what case company’s customers want out of the model and what they think is the ideal way to obtain these models and what are the desired functionalities for this service. This master’s thesis uses a modified version of lead user method to gain understanding of what the needs are in a longer term. In this framework also benchmarking of current solutions and their common model functions is done. Empirical data is collected with survey and interviews. As a result this thesis provides understanding that what is the information customer uses when obtaining a model, what kind of model is expected to be achieved and how is should the process optimally function. Based on these results ideal service is pointed out.

Marks of Fire, Value and Faith. Swords with Ferrous Inlays in Finland during the Late Iron Age (ca. 700–1200 AD)

This study explores swords with ferrous inlays found in Finland and dating from the late Iron Age, ca. 700–1200 AD. These swords reflect profound changes not only in styles and fashion but also in the technology of hilts and blades. This study explores how many of these kinds of swords are known from Finland, how they were made and where, what their status was in Late Iron Age Finland, and where the Finnish finds stand in accordance with other areas of Europe. The various methods included measuring of the finds and statistics. The main method of revealing the inlaid marks was radiography due to its non-destructive nature. In cases where inlays were visible without radiography, their details were inspected via microscopy. To study the materials and manufacture of inlaid swords, a sample of them was metallographically analysed to determine the forging technologies and nature of used materials. Furthermore, the manufacture was also studied with experimental approaches. As a result, a catalogue of 151 swords with ferrous inlays was created. This number is relatively high compared with other European countries, although systematic studies have been conducted in only some countries. The inlaid motifs were classified into five distinct categories to help the classification. To summarize, almost every documented inlaid sword was unique in some respect including measurements, inlaid motifs and materials of blades and inlays. Technological variation was also present, some blades being poorer and some of higher quality in spite of the inlaid motifs. Misspelt inscriptions as well as letter-like marks were common in Finland and also in Scandinavia. Furthermore, the provenance of iron and steel used in some blades hints at Scandinavian ores. The above observations, along with the experimental results indicating the existence of multiple alternative techniques of inlaying, suggest that these swords were manufactured locally in Scandinavia, most likely in imitation of Continental European models. Inlaid swords were valued partly for their assumed functionality in combat, as evidenced by damage on some examined blades, or they were valued for their inlays, which could have had fashionable or symbolical meanings bound to local beliefs.

Oxidation of Aqueous Thiosulfate Solutions by Pulsed Corona Discharge

The aim of this Master’s thesis focused on the oxidation of sodium thiosulfate using non thermal plasma technology as an advance oxidation process (AOP). By using this technology we can degrade certain toxic chemical compounds present in mining wastewaters as pollutants. Different concentrations of thiosulfate and pulse frequencies were used in the PCD experiments and the results in terms of various delivered energies (kWh/m3) and degradation kinetics were compared. Pulsed corona discharge is an energy efficient process compared to other oxidation processes using for the treatment of waste water pollutants. Due to its simplicity and low energy costs make it attractive in the field of waste water treatment processes. This technology of wastewater treatment has been tested mainly on pilot scale level and in future the attempts are to be focus on PCD investigations on larger process scale. In this research work of oxidation of thiosulfate using pulsed corona discharge, the main aim of this research was to study degradation of a studied toxic and not environmental friendly chemical compound. The focus of this research was to study the waste waters coming from the gold mines containing leachate compound thiosulfate. Literature review contained also gold leaching process when cyanide is used as the leachate. Another objective of this work was to compare PCD process with other processes based on their energy efficiencies. In the experimental part two concentrations of sodium thiosulfate, 1000ppm and 400ppm, were used. Two pulse generator frequencies of 833 and 200 pulses per second (pps) were used. The chemical analyses of the samples taken during semi-batch PCD oxidation process were analyzed by ion chromatographic (IC). It is observed after the analyses that among different frequencies and concentrations, the most suitable ones for the process is 200pps and 1000ppm respectively because the pollutants present in the waste water has more time to react with the OH radicals which are the oxidants and the process is energy efficient compared to other frequencies.

Software for Transport Accessibility Analysis: The Case of Moscow

In this thesis the process of building a software for transport accessibility analysis is described. The goal was to create a software which is easy to distribute and simple to use for the user without particular background in the field of the geographical data analysis. It was shown that existing tools do not suit for this particular task due to complex interface or significant rendering time. The goal was accomplished by applying modern approaches in the process of building web applications such as maps based on vector tiles, FLUX architecture design pattern and module bundling. It was discovered that vector tiles have considerable advantages over image-based tiles such as faster rendering and real-time styling.

Tutors as mediators of exchange student experiences: evaluation of the international student tutor system at the University of Turku

As academic student mobility is increasing, improving the functionality of international operations is recognised as a competitive advantage at tertiary education institutions. Although many scholars have researched the experiences of exchange students, the role of student tutors and their contribution to exchange students’ experiences is still an unknown factor. This research examines international tutoring at the University of Turku, and aims to understand better the way tutoring contributes to exchange experiences and to explore the functionality of the tutor system and discover areas for improvements. To achieve these goals, the research seeks to answer the fundamental research question: What is the role of tutors in mediating exchange experiences? The theoretical framework combines literature on mediating exchange experiences, the phenomenon of studying abroad, the process of adaptation, the importance of cross-cultural communication, and the role of student tutors as mediators. Based on the literature review, a theoretical model for studying the mediation of exchange experiences is introduced. The model’s applicability and validity is examined through a case study. Three methods were used in the empirical research: surveys, participant observations, and interviews. These methods provided extensive data from three major parties of the tutor system: tutors, exchange students, and the international office. The findings of the research reveal that tutoring – instrumental leading and social and cultural mediating – generates both negative and positive experiences depending on the individuals’ expectations, motivations, relationships, and the nature of the tutoring. Although functional, there are a few weaknesses in the tutor system. Tutors tend to act as effective instrumental leaders, but often fail to create a friendship and contribute to the exchange students’ experience through social and cultural mediation, which is significantly more important in the exchange students’ overall experience in terms of building networks, adapting, gaining emotional experiences, and achieving the stage of personal development and mental change. Based on the weaknesses, three improvements are suggested: (1) increasing comprehensive sharing of information, effective communication, and collective cooperation, (2) emphasising the importance of social and cultural mediation and increasing the frequency of interaction between tutors and exchange students, and (3) improving the recruitment and training, revising the process of reporting and rewarding, and finally, enhancing services and coordination.

Framing the Gas Market Uncertainty in Russian Gas Export Policy: The Role of Underlying Ideas

Gas suppliers including Russia are facing the gas market uncertainty caused by the fast growing development of shale gas and liquefied natural gas (LNG). Given that Russia is one of the key energy suppliers in the world, Russian energy policy is intensively studied. However, the majority of the researches focus on the conventional gas sector and very few focus on the unconventional gas sector such as shale gas and LNG. In this light, this thesis aims at examining how the gas market uncertainty is framed in Russian gas export policy as well as discover how the interaction between underlying ideas and the policy frames informs policymaking. After analyzing Russian official documents, three policy frames were identified: shale gas—competition frame, LNG—cooperation frame and cooperation—competition frame. The shale gas—competition frame emphasizes the confrontation with the shale revolution in the USA. The LNG—cooperation frame rests on the idea of building cooperation with the Asia-Pacific region by the LNG trade. The cooperation—competition frame describes the oscillating Russia-EU relationship. Both the economic and ecological dimensions in the policy environment enable these three policy frames. However, the cooperation frame is constrained by the physical dimension since Russia has only one LNG facility in use. The institutional dimension underpins the idea of competition in the cooperation—competition frame. The reason is because of the divergent perspectives between Russia and the EU regarding regulations and market liberalizations. In sum, the result is different from the traditional geopolitical frame which depicts Russia as an energy superpower. Instead, this thesis suggests that Russia is shifting the priority from political interests to business interests in Russian gas export policy, particularly in the domain of shale gas and LNG.

Sisäilma- ja kosteusteknisten asantuntijapalvelujen käyttö rakennuttamisprosessissa

Tämä insinöörityö tehtiin HKR-Rakennuttajan Taloteknisen toimiston Kiinteistöjen elinkaaripalvelut- yksikölle. Työ on osa HKR-Rakennuttajan laatujärjestelmän uudistusta ja selkeytystä. Tavoitteena oli selvittää millaisiin asioihin tulisi kiinnittää huomiota kosteusteknisessä mielessä HKR-Rakennuttajan hankkeissa. Samoin Kiinteistöjen elinkaaripalvelut -yksikön asiantuntijapalveluiden käyttö rakennuttamisprosessissa ei ollut selvästi dokumentoituna HKR-Rakennuttajan laatujärjestelmään, joten tähän pyrittiin saamaan selkeytys. Lisäksi käynnissä on kuntotutkimustoiminnan uudistus, jossa kosteusteknisten asiantuntijapalvelujen konsulttitoiminnan käytössä tapahtuu muutoksia. Omalta osaltaan tämä insinöörityö pyrki selvittämään konsultin toimia hankkeen eri vaiheissa. Insinöörityössä kartoitettiin yksikön omat toimintakuvaukset kosteus- ja sisäilmateknisissä asioissa. Tämän jälkeen käydään läpi kaksi eri HKR-Rakennuttajan kohdetta, jossa oli kosteusteknisesti ongelmia. Kohteet valittiin ohjaajien toimesta, sillä näin saatiin esille työn kannalta oleellisia puutteita. Lisäksi kartoitettiin HKR-Rakennuttajan hankkeiden eri vaiheissa eri osapuolien tehtävät kosteus- ja sisäilmatekniseltä kannalta. Kartoitusten ja toimintakuvausten perusteella tehtiin ohje, joka liitettiin HKR-Rakennuttajan laatujärjestelmään. Lisäksi tehtiin urakkarajaliitteeseen velvoite, jossa määritellään kosteudenhallintasuunnitelman sisältö. Tietolähteinä tässä insinöörityössä oli alan kirjallisuus, HKR-Rakennuttajan Taloteknisen toimiston henkilökunnalta saatu suullinen informaatio ja internet.

Kaupungin ja maaseudun vuorovaikutus alueellisessa kehittämispolitiikassa

In Finland, European Union membership and economic globalisation have changed the position of regions from closed territorial systems to nodes of open international networks. The increasing complexity of cities as globalised knowledge centres and functionally specialised and diversified rural areas, and on the other hand growing disparities between prosperous urban cores and lagging peripheral areas are also essential features in contemporary regional development. These trends have produced new needs to promote mutual dialogue between cities and the countryside in western market economies. Urban-rural interaction is an idea which was developed in the late 1990s within regional policy to pull together these new challenges to regional development and handle cities and the countryside as a whole. The aim of my study is to conceptualise the idea of urban-rural interaction, explain the phenomenon theoretically, clarify past and present urban and rural development and analyse regional policies from the interaction angle. The ultimate purpose is to illustrate the existence and nature of particular interaction policy in a globalising society. The general method is discourse analysis, which I use in three cases: Central Finland, South-Ostrobothnia and South-West Finland. Theoretically I have a two-dimensional approach. On the first hand I use World-System theory to explain how the global economy is moulding urban and rural structures at the regional level. On the other hand I use regime theory to explain local political actions and practises between cities and the countryside under the overlapping pressures deriving from reformulated regional structures and policies.

Adaptation to globalisation in Finland has been carried out by strengthening urban centres. The stress in regional policy has been in urban development. The development of the countryside has mostly been implemented by a separate rural policy. At the end of the 1990s and early 2000s Finnish cities have actually shown themselves to be competitive in global markets. The drawbacks of the new growth centre policy have been the sparse network of prosperous cities and their weak spreading effects, which have hindered comprehensive regional development. Tensions between urban and rural areas have also deepened. In this situation the interaction policy is used as a way of balancing development and moderate conflicts within the regions. From this point of view urban-rural interaction can be seen as a way of tackling the challenges of globalisation.

On the other hand the results emphasise that actors involved in regional development still believe, although the hegemonic discourse is on urban policy, that there are opportunities to stimulate progress in the countryside as well. In the situation where regional authorities control development resources, rural development can be successful only if rural actors manage to establish fruitful relationships with their urban partners. This is also the weakness of the programme-based regional policy. If rural municipalities or other actors are for any reason incapable of building development regimes with cities, the offers of interaction policy will be useless.

The problem of the interaction policy is that the focus and methods of it have so far been rather underdeveloped. In order to improve the efficiency of the interaction policy, further research should concentrate on the social processes which define the position of cities and the countryside as partners of interaction, and practises which promote or prohibit the possibilities of developing the interaction policy. The efforts to define different contents of urban-rural interaction or promote interaction projects should not have such an important role in the future as they have had so far. Instead, the focus of interaction policy should be on questions such as how to manage the political tensions between town and country and how to create a positive atmosphere for regional policy where the needs of urban and rural development are promoted equally.

Re-usable ASIC integrationverification software architecture

Mikropiirien valmistus- ja suunnittelutekniikoiden kehittyminen mahdollistaa yhä monimutkaisempien mikropiirien valmistamisen. Piirien verifioinnista onkin tullut prosessin aikaa vievin osa,sillä kompleksisuuden kasvaessa kasvaa verifioinnin tarve eksponentiaalisesti. Vaikka erinäisiä strategioita piirien integroinnin verifiointiin on esitetty, mm. verifioinnin jakaminen koko suunnitteluprosessin ajalle, jopa yli puolet koko piirin suunnitteluun ja valmistukseen käytetystä työmäärästä kuluu verifiointiin. Uudelleenkäytettävät komponentit ovat pääosassa piirin suunnittelussa, mutta verifioinnissa uudelleenkäytettävyyttä ei ole otettu kunnolla käyttöön ainakaan verifiointiohjelmistojen osalta. Tämä diplomityö esittelee uudelleenkäytettävän mikropiirien verifiointiohjelmistoarkkitehtuurin, jolla saadaan verifiointitaakkaa vähennettyä poistamalla verifioinnissa käytettävien ohjelmistojen uudelleensuunnittelun ja toteuttamisen tarvetta.

Kiinteistöpalveluiden laatujärjestelmän kehittäminen

Kiinteistöalan haasteeksi on muodostunut laadukkaan palvelun hankkiminen kilpailuilta kiinteistöpalveluiden markkinoilta ja ulkomaisten kiinteistösijoittajien asettamat vaatimukset yhteistyölle. Tutkimuksen tavoitteena oli määritellä asiakastyytyväisyyttä tukevia elementtejä kiinteistöjohtamisen palveluprosesseihin laatujärjestelmän kehittämisen tueksi ja tutkia kiinteistöpalveluiden sopivuutta rakennusliikkeen palveluntarjontaan. Tutkimuksessa esitettyjä teoreettisia malleja sovellettiin diplomityön empiirisessä osiossa Oka Oy:n kiinteistöpalveluyksikön palveluprosesseihin. Palvelun laadun liittäminen asiakastyytyväisyyden muodostumiseen nousi laatujärjestelmän perustaksi. Kiinteistöpalveluiden laadun parantaminen alkaa alihankkijoiden kilpailutuksen onnistumisesta ja palveluiden tuottamisen aikaisesta laadun valvonnasta. Asiakastyytyväisyyden ylläpitäminen edellyttää säännöllistä ja sisällöllisesti asiakaskohtaisesti räätälöityä raportointia sekä asiakastarpeiden ymmärtämisen kautta tapahtuvaa jälkimarkkinointia. Tutkimuksen perusteella suomalaisten rakennusliikkeiden palvelutarjonta tulee laajentumaan kohti kiinteistön elinkaaren aikaisia palveluja synergiahyötyjen ja asiakkaiden kumppanuudelta vaatimien hyötyjen vuoksi. Vahvana kilpailuetuna tulee olemaan hyväksi havaittujen käytönaikaisten taloteknisten ratkaisujen saattaminen rakentamisen suunnittelun hyödynnettäväksi.

Langaton työympäristö yrityskäyttäjille: Kokonaisratkaisut ja niiden tuotteistus

Langattomuus ja erilaiset mobiilit ratkaisut ovat tulleet jäädäkseen.Langattomiin laitteisiin törmää nykyään päivittäin mitä erilaisimmissa yhteyksissä ja myös yrityksissä on huomattu langattomuuden mukanaan tuoma potentiaali mahdollisuutena tehostaa työntekoa, parantaa tuottavuutta sekä luoda kokonaan uusia toimintamalleja. Tämän työn teettäjänä toimii Datainfo Solutions Lappeenranta.Tarkoituksena oli luoda yrityksen käyttöön langattomia mobiilityöympäristöjä, joita yritys voi hyödyntää tarjotessaan uudentyyppisiä langattomia kokonaisratkaisuja asiakkailleen. Työ käsittelee ensin perusteknologioita, joilla langaton työympäristö voidaan toteuttaa. Tietoturvaosiossa käsitellään ensimmäisessä luvussa esiteltyjen teknologioiden tietoturvaa sekä langattomuuden mukanaan tuomia erityisiä uhkakuvia sekä ratkaisuja näihin tietoturvauhkiin. Langattomuus ja liikkuminen lisäävät luonnollisesti erilaisten etäkäyttöratkaisujen käyttöä, joten työssä esitellään myös etäkäytön teoriapuolta. Diplomityön tuloksena saatiin langaton kokonaisratkaisu, joka sisältää kolme eri asiakassegmenttiäja kuusi erilaista ja -tyyppistä tuotteistusta.