Computational and Experimental Investigation of the Grooved Roll in Paper Machine Environment

In the paper machine, it is not a desired feature for the boundary layer flows in the fabric and the roll surfaces to travel into the closing nips, creating overpressure. In this thesis, the aerodynamic behavior of the grooved roll and smooth rolls is compared in order to understand the nip flow phenomena, which is the main reason why vacuum and grooved roll constructions are designed. A common method to remove the boundary layer flow from the closing nip is to use the vacuum roll construction. The downside of the use of vacuum rolls is high operational costs due to pressure losses in the vacuum roll shell. The deep grooved roll has the same goal, to create a pressure difference over the paper web and keep the paper attached to the roll or fabric surface in the drying pocket of the paper machine. A literature review revealed that the aerodynamic functionality of the grooved roll is not very well known. In this thesis, the aerodynamic functionality of the grooved roll in interaction with a permeable or impermeable wall is studied by varying the groove properties. Computational fluid dynamics simulations are utilized as the research tool. The simulations have been performed with commercial fluid dynamics software, ANSYS Fluent. Simulation results made with 3- and 2-dimensional fluid dynamics models are compared to laboratory scale measurements. The measurements have been made with a grooved roll simulator designed for the research. The variables in the comparison are the paper or fabric wrap angle, surface velocities, groove geometry and wall permeability. Present-day computational and modeling resources limit grooved roll fluid dynamics simulations in the paper machine scale. Based on the analysis of the aerodynamic functionality of the grooved roll, a grooved roll simulation tool is proposed. The smooth roll simulations show that the closing nip pressure does not depend on the length of boundary layer development. The surface velocity increase affects the pressure distribution in the closing and opening nips. The 3D grooved roll model reveals the aerodynamic functionality of the grooved roll. With the optimal groove size it is possible to avoid closing nip overpressure and keep the web attached to the fabric surface in the area of the wrap angle. The groove flow friction and minor losses play a different role when the wrap angle is changed. The proposed 2D grooved roll simulation tool is able to replicate the grooved aerodynamic behavior with reasonable accuracy. A small wrap angle predicts the pressure distribution correctly with the chosen approach for calculating the groove friction losses. With a large wrap angle, the groove friction loss shows too large pressure gradients, and the way of calculating the air flow friction losses in the groove has to be reconsidered. The aerodynamic functionality of the grooved roll is based on minor and viscous losses in the closing and opening nips as well as in the grooves. The proposed 2D grooved roll model is a simplification in order to reduce computational and modeling efforts. The simulation tool makes it possible to simulate complex paper machine constructions in the paper machine scale. In order to use the grooved roll as a replacement for the vacuum roll, the grooved roll properties have to be considered on the basis of the web handling application.

Improving Cross Direction Basis Weight Profile in a Fourdrinier Paper Machine

The purpose of this study was to improve PM7’s basis weight CD profile in Stora Enso’s Berghuizer mill and to search mechanical defects which affect to the formation of the basis weight CD profile. In the theoretical part PM7’s structure was presented and the formation of the basis weight and caliper CD profiles was examined as well as disturbances which are affecting to the formation. The function of the control system was scrutinised for the side of CD profiles as well as the formation of the measured CD profiles. Tuning of the control system was examined through the response model and filtering. Specification of the response model and filtering was explained and how to determine 2sigma statistical number. In the end of the theoretical part ATPA hardware and a new profile browser were introduced. In the experimental part focus was in the beginning to search and remove mechanical defects which are affecting to CD profiles. The next step was to verify the reliability of the online measurements, to study the stability of the basis weight CD profile and to find out so called fingerprint, a basis weight CD profile which is unique for each paper machine. New response model and filtering value for basis weight CD profile was determined by bump tests. After a follow up period the affect of the new response model and filtering was analysed.

Simulating the performance of paper machine control

The topic of this thesis is the simulation of a combination of several control and data assimilation methods, meant to be used for controlling the quality of paper in a paper machine. Paper making is a very complex process and the information obtained from the web is sparse. A paper web scanner can only measure a zig zag path on the web. An assimilation method is needed to process estimates for Machine Direction (MD) and Cross Direction (CD) profiles of the web. Quality control is based on these measurements. There is an increasing need for intelligent methods to assist in data assimilation. The target of this thesis is to study how such intelligent assimilation methods are affecting paper web quality. This work is based on a paper web simulator, which has been developed in the TEKES funded MASI NoTes project. The simulator is a valuable tool in comparing different assimilation methods. The thesis contains the comparison of four different assimilation methods. These data assimilation methods are a first order Bayesian model estimator, an ARMA model based on a higher order Bayesian estimator, a Fourier transform based Kalman filter estimator and a simple block estimator. The last one can be considered to be close to current operational methods. From these methods Bayesian, ARMA and Kalman all seem to have advantages over the commercial one. The Kalman and ARMA estimators seems to be best in overall performance.

Permanent Magnet Synchronous Machine for Parallel Hybrid Vehicle

The aim of this thesis is to describe hybrid drive design problems, the advantages and difficulties related to the drive. A review of possible hybrid constructions, benefits of parallel, series and series-parallel hybrids is done. In the thesis analytical and finite element calculations of permanent magnet synchronous machines with embedded magnets were done. The finite element calculations were done using Cedrat’s Flux 2D software. This machine is planned to be used as a motor-generator in a low power parallel hybrid vehicle. The boundary conditions for the design were found from Lucas-TVS Ltd., India. Design Requirements, briefly: • The system DC voltage level is 120 V, which implies Uphase = 49 V (RMS) in a three phase system. • The power output of 10 kW at base speed 1500 rpm (Torque of 65 Nm) is desired. • The maximum outer diameter should not be more than 250 mm, and the maximum core length should not exceed 40 mm. The main difficulties which the author met were the dimensional restrictions. After having designed and analyzed several possible constructions they were compared and the final design selected. Dimensioned and detailed design is performed. Effects of different parameters, such as the number of poles, number of turns and magnetic geometry are discussed. The best modification offers considerable reduction of volume.

Source and Target Text-Orientation in Drama Translation. An Analysis of Four Translations of William Shakespeare’s Julius Caesar

Tässä pro gradu -tutkielmassa käsittelen lähde- ja kohdetekstikeskeisyyttä näytelmäkääntämisessä. Tutkimuskohteina olivat käännösten sanasto, syntaksi, näyttämötekniikka, kielikuvat, sanaleikit, runomitta ja tyyli. Tutkimuksen tarkoituksena oli selvittää, näkyykö teoreettinen painopisteen siirtyminen lähdetekstikeskeisyydestä kohdetekstikeskeisyyteen suomenkielisessä näytelmäkääntämisessä. Oletuksena oli, että siirtyminen näkyy käytetyissä käännösstrategioissa. Tutkimuksen teoriaosuudessa käsitellään ensin lähde- ja kohdetekstikeskeisiä käännösteorioita. Ensin esitellään kaksi lähdetekstikeskeistä teoriaa, jotka ovat Catfordin (1965) muodollinen vastaavuus ja Nidan (1964) dynaaminen ekvivalenssi. Kohdetekstikeskeisistä teorioista käsitellään Touryn (1980) ja Newmarkin (1981) teoreettisia näkemyksiä sekä Reiss ja Vermeerin (1986) esittelemää skopos-teoriaa. Vieraannuttamisen ja kotouttamisen periaatteet esitellään lyhyesti. Teoriaosuudessa käsitellään myös näytelmäkääntämistä, William Shakespearen kieltä ja siihen liittyviä käännösongelmia. Lisäksi esittelen lyhyesti Shakespearen kääntämistä Suomessa ja Julius Caesarin neljä kääntäjää. Tutkimuksen materiaalina oli neljä Shakespearen Julius Caesar –näytelmän suomennosta, joista Paavo Cajanderin käännös on julkaistu vuonna 1883, Eeva-Liisa Mannerin vuonna 1983, Lauri Siparin vuonna 2006 ja Jarkko Laineen vuonna 2007. Analyysissa käännöksiä verrattiin lähdetekstiin ja toisiinsa ja vertailtiin kääntäjien tekemiä käännösratkaisuja. Tulokset olivat oletuksen mukaisia. Lähdetekstikeskeisiä käännösstrategioita oli käytetty uusissa käännöksissä vähemmän kuin vanhemmissa. Kohdetekstikeskeiset strategiat erosivat huomattavasti toisistaan ja uusinta käännöstä voi sanoa adaptaatioksi. Jatkotutkimuksissa tulisi materiaali laajentaa koskemaan muitakin Shakespearen näytelmien suomennoksia. Eri aikakausien käännöksiä tulisi verrata keskenään ja toisiinsa, jotta voitaisiin luotettavasti kuvata muutosta lähde- ja kohdetekstikeskeisten käännösstrategioiden käytössä ja eri aikakausien tyypillisten strategioiden kartoittamiseksi.

Cultural and textual properties in the translation and interpretation of allusions. An analysis of allusions in Dorothy L. Sayers’ detective novels translated into Finnish in the 1940s and the 1980s

Kulttuuriset ja tekstuaaliset tekijät alluusioiden kääntämisessä ja tulkinnassa. Alluusiot Dorothy L. Sayersin 1940- ja 1980-luvuilla suomennetuissa salapoliisiromaaneissa Väitöskirja käsittelee alluusioiden kääntämistä ja tulkintaa. Alluusio on intertekstuaalinen viittaus, jonka tulkitsemiseen tarvitaan implisiittistä tietoa tutuksi oletetusta viittauskohteesta. Käännösongelma alluusiosta tulee, mikäli kohdekulttuurin lukijat eivät tunne viittauskohdetta eivätkä voi päätellä alluusion merkitystä. Tutkimus pyrkii kuitenkin uuden analyysimenetelmän avulla osoittamaan, että vieraat alluusiot eivät välttämättä johda tulkintaongelmiin. Väitöskirja jakautuu kahteen osaan: analyysimenetelmän kehittämiseen (luvut 1-5) sekä tapaustutkimukseen (luvut 6-7). Kehitetyn menetelmän avulla pystytään analysoimaan aikaisempaa tarkemmin, millaisia tulkintamahdollisuuksia alluusiot tarjoavat eri lukijakunnille ja miten lähdetekstin alluusioiden kulttuuriset ja tekstuaaliset piirteet korreloivat käännösstrategioiden kanssa. Tapaustutkimus selvittää, millaisia tulkintamahdollisuuksia Dorothy L. Sayersin 1940- ja 1980-luvuilla suomennettujen salapoliisiromaanien alluusiot tarjosivat aikansa suomalaisille lukijoille. Tavoitteena on myös hahmottaa, miten suomentajien käännösratkaisut ja alluusioiden tulkintamahdollisuudet liittyvät toisaalta lähdetekstin alluusioiden piirteisiin ja toisaalta kohdekulttuurin kontekstiin. Tapaustutkimus tarjoaa näin uutta tietoa suomennoskirjallisuuden ja salapoliisiromaanien historiasta. Analyysimenetelmä määrittelee aikaisempaa alluusioita ja intertekstuaalisuutta käsitelleen tutkimuksen pohjalta ne kulttuuriset ja tekstuaaliset piirteet, jotka vaikuttavat alluusioiden kääntämiseen ja tulkintaan. Kulttuurisessa mielessä alluusio voi olla tietylle lukijakunnalle tuttu tai tuntematon. Tekstuaalisia tekijöitä ovat alluusion muodon ja tyylin tunnusmerkillisyys sekä alluusion pintamerkityksen koherenttius uudessa tekstikontekstissa, ilman tietoa viittauskohteesta. Alluusioiden tulkinnassa on perinteisesti erotettu toisaalta allusiivinen tulkintamahdollisuus, jossa alluusio on lukijoille tuttu ja yhdistettävissä viittauskohteeseensa, toisaalta kulttuuritöyssy, jonka muodostaa lukijoille tuntematon ja pintamerkitykseltään inkoherentti alluusio. Tutkimuksessa määritellään kulttuuristen ja tekstuaalisten tekijöiden perusteella lisäksi kaksi muuta mahdollisuutta. Pseudo-allusiivisessa tulkinnassa tuntematon alluusio erottuu ympäröivästä tekstikontekstista tyyliltään ja on koherentti ainakin kuvaannollisessa mielessä ilman viittauskohdettaan. Ei-allusiivisessa tulkinnassa taas vieras alluusio sulautuu kontekstiin sekä muodoltaan että merkitykseltään niin, ettei lukija edes huomaa mahdollista alluusiota. Tulkintamahdollisuuksien jakauma antaa yleiskuvan siitä, miten tietty lukijakunta pystyi tulkitsemaan tekstin alluusioita. Lisäksi analyysi tarkastelee lähdetekstin ja käännöksen välillä tulkintamahdollisuuksissa tapahtuneita muutoksia sekä niiden vaikutusta tulkinnan vaatimaan vaivannäköön (effort) ja alluusion funktioihin. Tapaustutkimus perehtyy Sayers-suomennosten kulttuurikonteksteihin tarkastelemalla salapoliisiromaanien asemaa suomalaisessa kirjallisuusjärjestelmässä, suomennoksilta odotettuja piirteitä sekä suomentajien ammattikuvaa, taustoja ja työoloja. Tulosten perusteella alluusioiden kääntäminen oli vaativa tehtävä sekä 1940- että 1980-luvun suomentajille. Lähdetekstien alluusioista 60–70 prosenttia oli todennäköisesti kohdelukijoille vieraita. Molempina aikakausina suomennoksilta odotettiin silti sekä kielellistä sujuvuutta että lähdetekstin merkitysten välittämistä. 1940-luvun suomentajien tehtävää vaikeutti lisäksi mm. se, että suomentaminen oli enimmäkseen sivutoimista ja englanti oli harvoin parhaiten hallittu vieras kieli. Nämä olosuhteet lienevät vaikuttaneet etenkin vähäarvoisena pidetyn salapoliisikirjallisuuden suomennoksiin. 1980-luvulla suomentajien aikataulut olivat realistisempia, englannin taidot parempia ja päätoiminen suomentaminen mahdollista. Myös salapoliisiromaanien arvostus oli lisääntynyt. Sekä 1940- että 1980-luvun suomennoksissa kohdelukijoille vieraitakin alluusioita oli usein säilytetty, mikäli ne olivat koherentteja ilman viittauskohdettaan. Sen sijaan vieraita ja pintamerkitykseltään epäselviä alluusioita oli muokattu tai poistettu. Kuitenkin 1980-luvun suomentajat säilyttivät lähdetekstin alluusioita useammin ja tarkemmin kuin 1940-luvun suomentajat. Varsinkin poisjättämistä esiintyi 1940-luvun suomennoksissa enemmän. Alluusioiden tulkintamahdollisuudet olivat kaikissa käännöksissä muuttuneet sikäli, että melko harvat suomennetut alluusiot olivat enää kohdelukijoiden tunnistettavissa. Toisaalta myös kulttuuritöyssyt olivat harvinaisia. Erot 1940- ja 1980-luvun suomennosten välillä näkyivätkin pseudo-allusiivisissa ja ei-allusiivisissa tulkintamahdollisuuksissa. 1980-luvun suomennoksissa vieraat alluusiot oli johdonmukaisesti säilytetty niin, että käännetyt alluusiot voitiin tulkita pseudo-alluusioiksi. Sen sijaan 1940-luvun suomennoksissa vieraita alluusioita oli usein muokattu tai jätetty pois tavalla, joka johti ei-allusiiviseen tulkintaan. Kohdelukijoiden kannalta 1980-luvun suomennettujen alluusioiden tulkitseminen lienee vaatinut jonkin verran enemmän vaivaa. Toisaalta pseudo-allusiivisten käännösten pohjalta oli useimmiten mahdollista rakentaa koherentti tulkinta, ja monesti ne jopa välittivät samankaltaisia funktioita kuin lähdetekstin alluusiot. 1940-luvun suomennosten muokkaukset ja poistot periaatteessa helpottivat tulkintaa, mutta mahdollisia kulttuuritöyssyjä esiintyi edelleen, jopa kääntäjän tekemien muutosten seurauksena. 1940-luvun suomennoksissa myös käännettyjen alluusioiden funktiot olivat muuttuneet enemmän lähdetekstin alluusioihin nähden. Kaiken kaikkiaan 1980-luvun suomennokset olivat lähempänä oman aikansa hyvän käännöksen piirteitä. Toisaalta alluusioiden muokkaaminen sai 1940-luvun suomennokset muistuttamaan enemmän perinteistä arvoituksen ratkaisuun keskittyvää salapoliisiromaania, joten tältä osin ne lienevät vastanneet kohdelukijoiden odotuksia. Kulttuurikontekstin vaikutus siis näkyi sekä käännösstrategioissa että käännettyjen alluusioiden tulkintamahdollisuuksissa. Tutkimustuloksissa korostui kuitenkin myös se, että lähdetekstin alluusion pintamerkitys saattaa vaikuttaa käännösratkaisuihin. Lisäksi käännetyt pseudo-alluusiot saattavat välittää samankaltaisia funktioita kuin lähdetekstin alluusiot. Toisin kuin yleensä on esitetty, kohdelukijoille vieraiden alluusioiden säilyttäminen saattaakin siis olla toimiva ratkaisu.

Design and analysis of a transversal-flux switched-reluctance-linear-machine pole-pair

The Switched Reluctance technology is probably best suited for industrial low-speed or zerospeed applications where the power can be small but the torque or the force in linear movement cases might be relatively high. Because of its simple structure the SR-motor is an interesting alternative for low power applications where pneumatic or hydraulic linear drives are to be avoided. This study analyses the basic parts of an LSR-motor which are the two mover poles and one stator pole and which form the “basic pole pair” in linear-movement transversal-flux switchedreluctance motors. The static properties of the basic pole pair are modelled and the basic design rules are derived. The models developed are validated with experiments. A one-sided one-polepair transversal-flux switched-reluctance-linear-motor prototype is demonstrated and its static properties are measured. The modelling of the static properties is performed with FEM-calculations. Two-dimensional models are accurate enough to model the static key features for the basic dimensioning of LSRmotors. Three-dimensional models must be used in order to get the most accurate calculation results of the static traction force production. The developed dimensioning and modelling methods, which could be systematically validated by laboratory measurements, are the most significant contributions of this thesis.

Equivalence and translation strategies in multilingual thesaurus construction

In the present dissertation, multilingual thesauri were approached as cultural products and the focus was twofold: On the empirical level the focus was placed on the translatability of certain British-English social science indexing terms into the Finnish language and culture at a concept, a term and an indexing term level. On the theoretical level the focus was placed on the aim of translation and on the concept of equivalence. In accordance with modern communicative and dynamic translation theories the interest was on the human dimension. The study is qualitative. In this study, equivalence was understood in a similar way to how dynamic, functional equivalence is commonly understood in translation studies. Translating was seen as a decision-making process, where a translator often has different kinds of possibilities to choose in order to fulfil the function of the translation. Accordingly, and as a starting point for the construction of the empirical part, the function of the source text was considered to be the same or similar to the function of the target text, that is, a functional thesaurus both in source and target context. Further, the study approached the challenges of multilingual thesaurus construction from the perspectives of semantics and pragmatics. In semantic analysis the focus was on what the words conventionally mean and in pragmatics on the ‘invisible’ meaning - or how we recognise what is meant even when it is not actually said (or written). Languages and ideas expressed by languages are created mainly in accordance with expressional needs of the surrounding culture and thesauri were considered to reflect several subcultures and consequently the discourses which represent them. The research material consisted of different kinds of potential discourses: dictionaries, database records, and thesauri, Finnish versus British social science researches, Finnish versus British indexers, simulated indexing tasks with five articles and Finnish versus British thesaurus constructors. In practice, the professional background of the two last mentioned groups was rather similar. It became even more clear that all the material types had their own characteristics, although naturally not entirely separate from each other. It is further noteworthy that the different types and origins of research material were not used to represent true comparison pairs, and that the aim of triangulation of methods and material was to gain a holistic view. The general research questions were: 1. Can differences be found between Finnish and British discourses regarding family roles as thesaurus terms, and if so, what kinds of differences and which are the implications for multilingual thesaurus construction? 2. What is the pragmatic indexing term equivalence? The first question studied how the same topic (family roles) was represented in different contexts and by different users, and further focused on how the possible differences were handled in multilingual thesaurus construction. The second question was based on findings of the previous one, and answered to the final question as to what kinds of factors should be considered when defining translation equivalence in multilingual thesaurus construction. The study used multiple cases and several data collection and analysis methods aiming at theoretical replication and complementarity. The empirical material and analysis consisted of focused interviews (with Finnish and British social scientists, thesaurus constructors and indexers), simulated indexing tasks with Finnish and British indexers, semantic component analysis of dictionary definitions and translations, coword analysis and datasets retrieved in databases, and discourse analysis of thesauri. As a terminological starting point a topic and case family roles was selected. The results were clear: 1) It was possible to identify different discourses. There also existed subdiscourses. For example within the group of social scientists the orientation to qualitative versus quantitative research had an impact on the way they reacted to the studied words and discourses, and indexers placed more emphasis on the information seekers whereas thesaurus constructors approached the construction problems from a more material based solution. The differences between the different specialist groups i.e. the social scientists, the indexers and the thesaurus constructors were often greater than between the different geo-cultural groups i.e. Finnish versus British. The differences occurred as a result of different translation aims, diverging expectations for multilingual thesauri and variety of practices. For multilingual thesaurus construction this means severe challenges. The clearly ambiguous concept of multilingual thesaurus as well as different construction and translation strategies should be considered more precisely in order to shed light on focus and equivalence types, which are clearly not self-evident. The research also revealed the close connection between the aims of multilingual thesauri and the pragmatic indexing term equivalence. 2) The pragmatic indexing term equivalence is very much context-depended. Although thesaurus term equivalence is defined and standardised in the field of library and information science (LIS), it is not understood in one established way and the current LIS tools are inadequate to provide enough analytical tools for both constructing and studying different kinds of multilingual thesauri as well as their indexing term equivalence. The tools provided in translation science were more practical and theoretical, and especially the division of different meanings of a word provided a useful tool in analysing the pragmatic equivalence, which often differs from the ideal model represented in thesaurus construction literature. The study thus showed that the variety of different discourses should be acknowledged, there is a need for operationalisation of new types of multilingual thesauri, and the factors influencing pragmatic indexing term equivalence should be discussed more precisely than is traditionally done.

Automated Software Testing in Machine Automation

The problem of software (SW) defaults is becoming more and more topical because of increasing amount of the SW and its complication. The majority of these defaults are founded during the test part that consumes about 40-50% of the development efforts. Test automation allows reducing the cost of this process and increasing testing effectiveness. In the middle of 1980 the first tools for automated testing appeared and the automated process was implemented in different kinds of SW testing. In short time, it became obviously, automated testing can cause many problems such as increasing product cost, decreasing reliability and even project fail. This thesis describes automated testing process, its concept, lists main problems, and gives an algorithm for automated test tools selection. Also this work presents an overview of the main automated test tools for embedded systems.

High-speed solid-rotor induction machine – calculation program

The aim of this thesis is to utilize the technology developed at LUT and to provide an easy tool for high-speed solid-rotor induction machine preliminary design. Computer aided design tool MathCAD has been chosen as the environment for realizing the calculation program. Four versions of the design program have been made depending on the motor rotor type. The first rotor type is an axially slitted solid-rotor with steel end rings. The next one is an axially slitted solid-rotor with copper end rings. The third machine type is a solid rotor with deep, rectangular copper bars and end rings (squirrel cage). And the last one is a solid-rotor with round copper bars and end rings (squirrel cage). Each type of rotor has its own specialties but a general thread of design is common. This paper follows the structure of the calculating program and explains some features and formulas. The attention is concentrated on the difference between laminated and solid-rotor machine design principles. There is no deep analysis of the calculation ways are presented. References for all solution methods appearing during the design procedure are given for more detailed studying. This thesis pays respect to the latest innovations in solid-rotor machines theory. Rotor ends’ analytical calculation follows the latest knowledge in this field. Correction factor for adjusting the rotor impedance is implemented. The purpose of the created design program is to calculate the preliminary dimensions of the machine according to initial data. Obtained results are not recommended for exact machine development. Further more detailed design should be done in a finite element method application. Hence, this thesis is a practical tool for the prior evaluating of the high-speed machine with different solid-rotor types parameters.

Externally excited synchronous machine: Testing the automation concept

This bachelor’s thesis is a part of the research project realized in the summer 2011 in Lappeenranta University of Technology. The goal of the project was to develop an automation concept for controlling the externally excited synchronous motor. Thesis concentrates on the testing planning and testing the system. Testing plan was made for three sectors: For the PLC program testing, for the communication testing and for the whole system testing. PLC program was tested with white box and destructive methods. Communication testing was done by switching maximum com-munication speed and checked if communication was reliable. Whole system testing included among other things speed and torque controlling. The system was tested with exploratory testing also. This enabled more reliable and broader testing than with systematical testing only.

Design and Control of Permanent Magnet Synchronous Machine for Hybrid Electric Vehicle

This master’s thesis mainly focuses on the design requirements of an Electric drive for Hybrid car application and its control strategy to achieve a wide speed range. It also emphasises how the control and performance requirements are transformed into its design variables. A parallel hybrid topology is considered where an IC engine and an electric drive share a common crank shaft. A permanent magnet synchronous machine (PMSM) is used as an electric drive machine. Performance requirements are converted into Machine design variables using the vector model of PMSM. Main dimensions of the machine are arrived using analytical approach and Finite Element Analysis (FEA) is used to verify the design and performance. Vector control algorithm was used to control the machine. The control algorithm was tested in a low power PMSM using an embedded controller. A prototype of 10 kW PMSM was built according to the design values. The prototype was tested in the laboratory using a high power converter. Tests were carried out to verify different operating modes. The results were in agreement with the calculations.