Tehdaslogistiikka : value added logistics of the supply and demand chain costfix

VALOSADE (Value Added Logistics in Supply and Demand Chains) on Lappeenrannan teknillisen yliopiston ja sielläprofessori Anita Lukan VALORE -tutkimusryhmän toteuttama tutkimusprojekti, jonka rahoittaja on ollut Tekes. Projekti on osa Tekesin ELO - Elektronisen liiketoiminnan logistiikka - teknologiaohjelmaa. Tutkimusta rahoittivat Tekesin lisäksi neljä yritystä, jotka toimivat myös tutkimustyön kohteina ja toimivat tarpeen mukaan yhteistyössä tutkijoiden kanssa. Yritysten toimialat ovat metsäteollisuus, laitevalmistaja, joka tarjoaa myös tuotteilleen jälkimarkkinapalveluja sekä kaksi logistiikkapalveluyritystä. Tämä työraportti liittyy VALOSADE - tutkimusprojektin osaprojektiin Costfix (Paper Mill Process - from Fixed Costs into Variable Costs). Costfix - projektin tavoitteena on tutkia ja löytää paperiteollisuudelle uusia toimintamalleja, jotka mahdollistavat kiinteiden kustannusten muuttamisen muuttuviksi. Merkittävä tutkimuksen osa-alue on myös tutkimuskohteiden liike-toiminnan nykytilan aiempaa tarkempi selvittäminen. Tämä työraportti käsittelee kunnossapidon materiaalilogistiikan osalta tehtaan sisällä tapahtuvaa toimintaa, josta tässä tutkimuksessa käytetään nimitystä tehdaslogistiikka. Nykytilaselvityksen perusteella nykyinen prosessiteollisuudessa ja myös pääsääntöisesti valmistavassa teollisuudessa yleisesti vallitseva teollisuusyrityksen käyttöinvestointia ylläpitävän palveluprosessin toimintarakenne, johtamistapa ja prosessin operatiivisten tehtävien toimenkuvat eivät tue ko. palvelukokonaisuuden tehokasta ja tuloksellista toteuttamista. Nykymuotoinen toimintamalli pikemminkin rajoittaa toimintaprosessin kokonaishallintaa ja sen tehostamiseksi investoitujen uusien teknisten ratkaisujen ja teknologian käyttöönottoa. Lisäksi yleisesti vallitseva toimintakulttuuri (mm. arvokäsitykset, uskomukset sekä toiminnan ja tavoitteiden taustalla olevat motiivit) sekä vaikeuttaa nykyisen ja tulevan kilpailutilanteen edellyttämien tehokkuus- ja tuottavuustavoitteiden toteutumista että hidastaa uudistusten onnistumista edellyttävän muutoksen etenemistä yrityksen sisällä. Tutkimuksen tulokset vahvistivat osaltaan sen, että tehdas- ja toimintokeskeinen johtaminen aiheuttavat palveluprosessin eri tehtäville asetettujen tavoitteiden ja perustehtäväkäsityksen välille ristiriitoja, joista seuraa sekä suoria että välillisiä vaikutuksia teollisuusyrityksen tuotantoprosessin toiminnan laatuun ja tuotantolaitteiden käyttövarmuuteen. Palvelukokonaisuuteen kuuluvien eri toimintaprosessien tehtävät on jaettu ristiriitaisesti toiminnoille siten, että erityisestikunnossapidon teknisten toimihenkilöitten hoidettavana on sekä ihmisen henkilökohtaisen kapasiteettirajan ylittävä että toisistaan liian suuri erilaisia osaamisia ja ymmärrystä edellyttävä tehtävämäärä. Nykytilan palvelutuotannossa esiintyvien ongelmien seuraukset ja perussyyt osoittavat, että merkittävästi pääomia sitovan valmistavan teollisuuden (mm. prosessiteollisuus) käyttö-omaisuutta ylläpitävän palveluprosessin hallinta on ulkoistettava tehdastasolta itsenäisesti hoidettavaksi liiketoimintakokonaisuudeksi, jonka operatiivinen johtaminen tapahtuu toimintaprosesseittain konsernin ylätasolta käsin. Johtamismallissa painottuu prosessijohtaminen ja oman vastuualueen toimintaprosessin asiantuntemus. Lisäksi ihmisen osaamiseen, ymmärrykseen ja toimintatapaan perustuva palvelu edellyttää johtamiselta henkilöjohtamistaitoa ja osaamisen johtamista. Liiketoiminnan uudenlainen keskittyminen, verkostoituminen ja globalisoituminen edellyttävät johdoltamyös erilaisten toimintaverkostojen ja sidosryhmien toiminnan ja tarpeen ymmärtämistä. Tutkimustulosten perusteella myös palveluprosesseissa toimivien toimihenkilöitten tehtäväkuvia on muutettava radikaalisti ja osa uusista toimenkuvista edellyttää lisäksi henkilöitten osaamistason aktiivista parantamista. Tässä raportissa esitetään toimintamalli, jossa kuvataan tutkimuksen pohjalta luotu palvelukokonaisuuden johtamismalli ja palveluprosessien eri tehtävätasot tehtävineen. Kuvattu johtamismalli on ollut jo yleisesti käytössä yksittäisillä palvelualoilla, mutta tässä esitetty malli on valmistavan yrityksen teknisiin tukipalveluihin muokattu sovellus.

Reduction of Greenhouse Gas Emissions in North-West Russia - Finnish Business Opportunities

Tutkimus suomalaisten yritysten liiketoimintamahdollisuuksista hiilidoksidipäästöjen vähentämisen parissa Luoteis-Venäjällä.

Supply chain integration: studies on linking customer responsiveness and operational efficiency in logistics policy planning

Abstract The research problem in the thesis deals with improving the responsiveness and efficiency of logistics service processes between a supplier and its customers. The improvement can be sought by customizing the services and increasing the coordination of activities between the different parties in the supply chain. It is argued that to achieve coordination the parties have to have connections on several levels. In the framework employed in this research, three contexts are conceptualized at which the linkages can be planned: 1) the service policy context, 2) the process coordination context, and 3) the relationship management context. The service policy context consists of the planning methods by which a supplier analyzes its customers' logistics requirements and matches them with its own operational environment and efficiency requirements. The main conclusion related to the service policy context is that it is important to have a balanced selection of both customer-related and supplier-related factors in the analysis. This way, while the operational efficiency is planned a sufficient level of service for the most important customers is assured. This kind of policy planning involves taking multiple variables into the analysis, and there is a need to develop better tools for this purpose. Some new approaches to deal with this are presented in the thesis.The process coordination context and the relationship management context deal with the issues of how the implementation of the planned service policies can be facilitated in an inter-organizational environment. Process coordination includes typically such mechanisms as control rules, standard procedures and programs, but inhighly demanding circumstances more integrative coordination mechanisms may be necessary. In the thesis the coordination problems in third-party logistics relationship are used as an example of such an environment. Relationship management deals with issues of how separate companies organize their relationships to improve the coordination of their common processes. The main implication related to logistics planning is that by integrating further at the relationship level, companies can facilitate the use of the most efficient coordination mechanisms and thereby improve the implementation of the selected logistics service policies. In the thesis, a case of a logistics outsourcing relationship is used to demonstrate the need to address the relationship issues between the service provider andthe service buyer before the outsourcing can be done.The dissertation consists of eight research articles and a summarizing report. The principal emphasis in the articles is on the service policy planning context, which is the main theme of six articles. Coordination and relationship issues are specifically addressed in two of the papers.

Modeling of non-isothermalvapor membrane separation with thermodynamic models and generalized mass transfer equations

A rigorous unit operation model is developed for vapor membrane separation. The new model is able to describe temperature, pressure, and concentration dependent permeation as wellreal fluid effects in vapor and gas separation with hydrocarbon selective rubbery polymeric membranes. The permeation through the membrane is described by a separate treatment of sorption and diffusion within the membrane. The chemical engineering thermodynamics is used to describe the equilibrium sorption of vapors and gases in rubbery membranes with equation of state models for polymeric systems. Also a new modification of the UNIFAC model is proposed for this purpose. Various thermodynamic models are extensively compared in order to verify the models' ability to predict and correlate experimental vapor-liquid equilibrium data. The penetrant transport through the selective layer of the membrane is described with the generalized Maxwell-Stefan equations, which are able to account for thebulk flux contribution as well as the diffusive coupling effect. A method is described to compute and correlate binary penetrant¿membrane diffusion coefficients from the experimental permeability coefficients at different temperatures and pressures. A fluid flow model for spiral-wound modules is derived from the conservation equation of mass, momentum, and energy. The conservation equations are presented in a discretized form by using the control volume approach. A combination of the permeation model and the fluid flow model yields the desired rigorous model for vapor membrane separation. The model is implemented into an inhouse process simulator and so vapor membrane separation may be evaluated as an integralpart of a process flowsheet.

Numerical and ExperimentalModelling of Gas Flow and Heat Transfer in the Air Gap of An Electric Machine

This work deals with the cooling of high-speed electric machines, such as motors and generators, through an air gap. It consists of numerical and experimental modelling of gas flow and heat transfer in an annular channel. Velocity and temperature profiles are modelled in the air gap of a high-speed testmachine. Local and mean heat transfer coefficients and total friction coefficients are attained for a smooth rotor-stator combination at a large velocity range. The aim is to solve the heat transfer numerically and experimentally. The FINFLO software, developed at Helsinki University of Technology, has been used in the flow solution, and the commercial IGG and Field view programs for the grid generation and post processing. The annular channel is discretized as a sector mesh. Calculation is performed with constant mass flow rate on six rotational speeds. The effect of turbulence is calculated using three turbulence models. The friction coefficient and velocity factor are attained via total friction power. The first part of experimental section consists of finding the proper sensors and calibrating them in a straight pipe. After preliminary tests, a RdF-sensor is glued on the walls of stator and rotor surfaces. Telemetry is needed to be able to measure the heat transfer coefficients at the rotor. The mean heat transfer coefficients are measured in a test machine on four cooling air mass flow rates at a wide Couette Reynolds number range. The calculated values concerning the friction and heat transfer coefficients are compared with measured and semi-empirical data. Heat is transferred from the hotter stator and rotor surfaces to the coolerair flow in the air gap, not from the rotor to the stator via the air gap, althought the stator temperature is lower than the rotor temperature. The calculatedfriction coefficients fits well with the semi-empirical equations and precedingmeasurements. On constant mass flow rate the rotor heat transfer coefficient attains a saturation point at a higher rotational speed, while the heat transfer coefficient of the stator grows uniformly. The magnitudes of the heat transfer coefficients are almost constant with different turbulence models. The calibrationof sensors in a straight pipe is only an advisory step in the selection process. Telemetry is tested in the pipe conditions and compared to the same measurements with a plain sensor. The magnitudes of the measured data and the data from the semi-empirical equation are higher for the heat transfer coefficients than thenumerical data considered on the velocity range. Friction and heat transfer coefficients are presented in a large velocity range in the report. The goals are reached acceptably using numerical and experimental research. The next challenge is to achieve results for grooved stator-rotor combinations. The work contains also results for an air gap with a grooved stator with 36 slots. The velocity field by the numerical method does not match in every respect the estimated flow mode. The absence of secondary Taylor vortices is evident when using time averagednumerical simulation.

Applicability of Power-Line Communications to Data Transfer of On-line Condition Monitoring of Electrical Drives

The research of power-line communications has been concentrated on home automation, broadband indoor communications and broadband data transfer in a low voltage distribution network between home andtransformer station. There has not been carried out much research work that is focused on the high frequency characteristics of industrial low voltage distribution networks. The industrial low voltage distribution network may be utilised as a communication channel to data transfer required by the on-line condition monitoring of electric motors. The advantage of using power-line data transfer is that it does not require the installing of new cables. In the first part of this work, the characteristics of industrial low voltage distribution network components and the pilot distribution network are measured and modelled with respect topower-line communications frequencies up to 30 MHz. The distributed inductances, capacitances and attenuation of MCMK type low voltage power cables are measured in the frequency band 100 kHz - 30 MHz and an attenuation formula for the cables is formed based on the measurements. The input impedances of electric motors (15-250 kW) are measured using several signal couplings and measurement based input impedance model for electric motor with a slotted stator is formed. The model is designed for the frequency band 10 kHz - 30 MHz. Next, the effect of DC (direct current) voltage link inverter on power line data transfer is briefly analysed. Finally, a pilot distribution network is formed and signal attenuation in communication channels in the pilot environment is measured. The results are compared with the simulations that are carried out utilising the developed models and measured parameters for cables and motors. In the second part of this work, a narrowband power-line data transfer system is developed for the data transfer ofon-line condition monitoring of electric motors. It is developed using standardintegrated circuits. The system is tested in the pilot environment and the applicability of the system for the data transfer required by the on-line condition monitoring of electric motors is analysed.