Scaling up stepwise feature introduction to construction of large software systems

Developing software is a difficult and error-prone activity. Furthermore, the complexity of modern computer applications is significant. Hence,an organised approach to software construction is crucial. Stepwise Feature Introduction – created by R.-J. Back – is a development paradigm, in which software is constructed by adding functionality in small increments. The resulting code has an organised, layered structure and can be easily reused. Moreover, the interaction with the users of the software and the correctness concerns are essential elements of the development process, contributing to high quality and functionality of the final product. The paradigm of Stepwise Feature Introduction has been successfully applied in an academic environment, to a number of small-scale developments. The thesis examines the paradigm and its suitability to construction of large and complex software systems by focusing on the development of two software systems of significant complexity. Throughout the thesis we propose a number of improvements and modifications that should be applied to the paradigm when developing or reengineering large and complex software systems. The discussion in the thesis covers various aspects of software development that relate to Stepwise Feature Introduction. More specifically, we evaluate the paradigm based on the common practices of object-oriented programming and design and agile development methodologies. We also outline the strategy to testing systems built with the paradigm of Stepwise Feature Introduction.

Ohjelmistoradion hyödyntäminen tiedonsiirron tutkimisessa LVDC-verkossa

Työssä tutkitaan tiedonsiirtoa eri modulaatioilla, bittinopeuksilla ja amplitudin voimakkuuksilla ja tuloksia tarkastellaan Bit Error Ration avulla. Signaaleja siirrettiiin myös koodattuna ja vertailtiin koodauksen etuja ja haittoja verrattuna koodaamattomaan tietoon. Datavirta kulkee AXMK-kaapelissa, joko tasasähkön mukana, tai maadoituskaapelissa. Tuloksissa havaittiin, että suurempi bittinopeus ei kasvattanut häviöiden määrää. Koodauksen käyttö toisaalta vähenti bittivirheiden määrää.

Modelling of hydrogen stratification and gas mixing in containment using the APROS code

Hydrogen stratification and atmosphere mixing is a very important phenomenon in nuclear reactor containments when severe accidents are studied and simulated. Hydrogen generation, distribution and accumulation in certain parts of containment may pose a great risk to pressure increase induced by hydrogen combustion, and thus, challenge the integrity of NPP containment. The accurate prediction of hydrogen distribution is important with respect to the safety design of a NPP. Modelling methods typically used for containment analyses include both lumped parameter and field codes. The lumped parameter method is universally used in the containment codes, because its versatility, flexibility and simplicity. The lumped parameter method allows fast, full-scale simulations, where different containment geometries with relevant engineering safety features can be modelled. Lumped parameter gas stratification and mixing modelling methods are presented and discussed in this master’s thesis. Experimental research is widely used in containment analyses. The HM-2 experiment related to hydrogen stratification and mixing conducted at the THAI facility in Germany is calculated with the APROS lump parameter containment package and the APROS 6-equation thermal hydraulic model. The main purpose was to study, whether the convection term included in the momentum conservation equation of the 6-equation modelling gives some remarkable advantages compared to the simplified lumped parameter approach. Finally, a simple containment test case (high steam release to a narrow steam generator room inside a large dry containment) was calculated with both APROS models. In this case, the aim was to determine the extreme containment conditions, where the effect of convection term was supposed to be possibly high. Calculation results showed that both the APROS containment and the 6-equation model could model the hydrogen stratification in the THAI test well, if the vertical nodalisation was dense enough. However, in more complicated cases, the numerical diffusion may distort the results. Calculation of light gas stratification could be probably improved by applying the second order discretisation scheme for the modelling of gas flows. If the gas flows are relatively high, the convection term of the momentum equation is necessary to model the pressure differences between the adjacent nodes reasonably.

Software and Code Finder: making research outputs visible

Poster at Open Repositories 2014, Helsinki, Finland, June 9-13, 2014

Simulation of the Interaction Mean Free Path between Neutrons and TRISO Particles

The interaction mean free path between neutrons and TRISO particles is simulated using scripts written in MATLAB to solve the increasing error present with an increase in the packing factor in the reactor physics code Serpent. Their movement is tracked both in an unbounded and in a bounded space. Their track is calculated, depending on the program, linearly directly using the position vectors of the neutrons and the surface equations of all the fuel particles; by dividing the space in multiple subspaces, each of which contain a fraction of the total number of particles, and choosing the particles from those subspaces through which the neutron passes through; or by choosing the particles that lie within an infinite cylinder formed on the movement axis of the neutron. The estimate from the current analytical model, based on an exponential distribution, for the mean free path, utilized by Serpent, is used as a reference result. The results from the implicit model in Serpent imply a too long mean free path with high packing factors. The received results support this observation by producing, with a packing factor of 17 %, approximately 2.46 % shorter mean free path compared to the reference model. This is supported by the packing factor experienced by the neutron, the simulation of which resulted in a 17.29 % packing factor. It was also observed that the neutrons leaving from the surfaces of the fuel particles, in contrast to those starting inside the moderator, do not follow the exponential distribution. The current model, as it is, is thus not valid in the determination of the free path lengths of the neutrons.

VVER-440 Thermal Hydraulics as a Computer Code Validation Challenge

This thesis concentrates on the validation of a generic thermal hydraulic computer code TRACE under the challenges of the VVER-440 reactor type. The code capability to model the VVER-440 geometry and thermal hydraulic phenomena specific to this reactor design has been examined and demonstrated acceptable. The main challenge in VVER-440 thermal hydraulics appeared in the modelling of the horizontal steam generator. The major challenge here is not in the code physics or numerics but in the formulation of a representative nodalization structure. Another VVER-440 specialty, the hot leg loop seals, challenges the system codes functionally in general, but proved readily representable. Computer code models have to be validated against experiments to achieve confidence in code models. When new computer code is to be used for nuclear power plant safety analysis, it must first be validated against a large variety of different experiments. The validation process has to cover both the code itself and the code input. Uncertainties of different nature are identified in the different phases of the validation procedure and can even be quantified. This thesis presents a novel approach to the input model validation and uncertainty evaluation in the different stages of the computer code validation procedure. This thesis also demonstrates that in the safety analysis, there are inevitably significant uncertainties that are not statistically quantifiable; they need to be and can be addressed by other, less simplistic means, ultimately relying on the competence of the analysts and the capability of the community to support the experimental verification of analytical assumptions. This method completes essentially the commonly used uncertainty assessment methods, which are usually conducted using only statistical methods.

Development of an HTR-10 model in the Serpent reactor physics code

The use of exact coordinates of pebbles and fuel particles of pebble bed reactor modelling becoming possible in Monte Carlo reactor physics calculations is an important development step. This allows exact modelling of pebble bed reactors with realistic pebble beds without the placing of pebbles in regular lattices. In this study the multiplication coefficient of the HTR-10 pebble bed reactor is calculated with the Serpent reactor physics code and, using this multiplication coefficient, the amount of pebbles required for the critical load of the reactor. The multiplication coefficient is calculated using pebble beds produced with the discrete element method and three different material libraries in order to compare the results. The received results are lower than those from measured at the experimental reactor and somewhat lower than those gained with other codes in earlier studies.

Nichesourcing The Uralic Languages For The Benefit Of Linguistic Research And Lingual Societies

The emerging technologies have recently challenged the libraries to reconsider their role as a mere mediator between the collections, researchers, and wider audiences (Sula, 2013), and libraries, especially the nationwide institutions like national libraries, haven’t always managed to face the challenge (Nygren et al., 2014). In the Digitization Project of Kindred Languages, the National Library of Finland has become a node that connects the partners to interplay and work for shared goals and objectives. In this paper, I will be drawing a picture of the crowdsourcing methods that have been established during the project to support both linguistic research and lingual diversity. The National Library of Finland has been executing the Digitization Project of Kindred Languages since 2012. The project seeks to digitize and publish approximately 1,200 monograph titles and more than 100 newspapers titles in various, and in some cases endangered Uralic languages. Once the digitization has been completed in 2015, the Fenno-Ugrica online collection will consist of 110,000 monograph pages and around 90,000 newspaper pages to which all users will have open access regardless of their place of residence. The majority of the digitized literature was originally published in the 1920s and 1930s in the Soviet Union, and it was the genesis and consolidation period of literary languages. This was the era when many Uralic languages were converted into media of popular education, enlightenment, and dissemination of information pertinent to the developing political agenda of the Soviet state. The ‘deluge’ of popular literature in the 1920s to 1930s suddenly challenged the lexical orthographic norms of the limited ecclesiastical publications from the 1880s onward. Newspapers were now written in orthographies and in word forms that the locals would understand. Textbooks were written to address the separate needs of both adults and children. New concepts were introduced in the language. This was the beginning of a renaissance and period of enlightenment (Rueter, 2013). The linguistically oriented population can also find writings to their delight, especially lexical items specific to a given publication, and orthographically documented specifics of phonetics. The project is financially supported by the Kone Foundation in Helsinki and is part of the Foundation’s Language Programme. One of the key objectives of the Kone Foundation Language Programme is to support a culture of openness and interaction in linguistic research, but also to promote citizen science as a tool for the participation of the language community in research. In addition to sharing this aspiration, our objective within the Language Programme is to make sure that old and new corpora in Uralic languages are made available for the open and interactive use of the academic community as well as the language societies. Wordlists are available in 17 languages, but without tokenization, lemmatization, and so on. This approach was verified with the scholars, and we consider the wordlists as raw data for linguists. Our data is used for creating the morphological analyzers and online dictionaries at the Helsinki and Tromsø Universities, for instance. In order to reach the targets, we will produce not only the digitized materials but also their development tools for supporting linguistic research and citizen science. The Digitization Project of Kindred Languages is thus linked with the research of language technology. The mission is to improve the usage and usability of digitized content. During the project, we have advanced methods that will refine the raw data for further use, especially in the linguistic research. How does the library meet the objectives, which appears to be beyond its traditional playground? The written materials from this period are a gold mine, so how could we retrieve these hidden treasures of languages out of the stack that contains more than 200,000 pages of literature in various Uralic languages? The problem is that the machined-encoded text (OCR) contains often too many mistakes to be used as such in research. The mistakes in OCRed texts must be corrected. For enhancing the OCRed texts, the National Library of Finland developed an open-source code OCR editor that enabled the editing of machine-encoded text for the benefit of linguistic research. This tool was necessary to implement, since these rare and peripheral prints did often include already perished characters, which are sadly neglected by the modern OCR software developers, but belong to the historical context of kindred languages and thus are an essential part of the linguistic heritage (van Hemel, 2014). Our crowdsourcing tool application is essentially an editor of Alto XML format. It consists of a back-end for managing users, permissions, and files, communicating through a REST API with a front-end interface—that is, the actual editor for correcting the OCRed text. The enhanced XML files can be retrieved from the Fenno-Ugrica collection for further purposes. Could the crowd do this work to support the academic research? The challenge in crowdsourcing lies in its nature. The targets in the traditional crowdsourcing have often been split into several microtasks that do not require any special skills from the anonymous people, a faceless crowd. This way of crowdsourcing may produce quantitative results, but from the research’s point of view, there is a danger that the needs of linguists are not necessarily met. Also, the remarkable downside is the lack of shared goal or the social affinity. There is no reward in the traditional methods of crowdsourcing (de Boer et al., 2012). Also, there has been criticism that digital humanities makes the humanities too data-driven and oriented towards quantitative methods, losing the values of critical qualitative methods (Fish, 2012). And on top of that, the downsides of the traditional crowdsourcing become more imminent when you leave the Anglophone world. Our potential crowd is geographically scattered in Russia. This crowd is linguistically heterogeneous, speaking 17 different languages. In many cases languages are close to extinction or longing for language revitalization, and the native speakers do not always have Internet access, so an open call for crowdsourcing would not have produced appeasing results for linguists. Thus, one has to identify carefully the potential niches to complete the needed tasks. When using the help of a crowd in a project that is aiming to support both linguistic research and survival of endangered languages, the approach has to be a different one. In nichesourcing, the tasks are distributed amongst a small crowd of citizen scientists (communities). Although communities provide smaller pools to draw resources, their specific richness in skill is suited for complex tasks with high-quality product expectations found in nichesourcing. Communities have a purpose and identity, and their regular interaction engenders social trust and reputation. These communities can correspond to research more precisely (de Boer et al., 2012). Instead of repetitive and rather trivial tasks, we are trying to utilize the knowledge and skills of citizen scientists to provide qualitative results. In nichesourcing, we hand in such assignments that would precisely fill the gaps in linguistic research. A typical task would be editing and collecting the words in such fields of vocabularies where the researchers do require more information. For instance, there is lack of Hill Mari words and terminology in anatomy. We have digitized the books in medicine, and we could try to track the words related to human organs by assigning the citizen scientists to edit and collect words with the OCR editor. From the nichesourcing’s perspective, it is essential that altruism play a central role when the language communities are involved. In nichesourcing, our goal is to reach a certain level of interplay, where the language communities would benefit from the results. For instance, the corrected words in Ingrian will be added to an online dictionary, which is made freely available for the public, so the society can benefit, too. This objective of interplay can be understood as an aspiration to support the endangered languages and the maintenance of lingual diversity, but also as a servant of ‘two masters’: research and society.