Biodieselin valmistusprosessin suunnittelu

Diplomityön tavoitteena oli kehittää prosessi, jolla rypsiöljystä voidaan valmistaa dieselöljyn korvaavaa biodieseliä. Työssä tutustuttiin raaka-aineiden sekä sivu- ja lopputuotteiden aine- ja laatuominaisuuksiin, biodieselin käytettävyyteen ja käytössä oleviin valmistusprosesseihin. Työn aikana kehitettiin uusi tekniikka biodieselin tuottamiseen. Diplomityön tuloksena syntyi pilot-laitteen suunnitelma, jonka mukaan laite rakennettiin. Pilot-laitteen koeajot varmistivat tekniikan toimivuuden ja lopputuote täyttää biodieselille asetetut vaatimukset. Menetelmä tarvitsee vielä jatkokehittelyä tuotantokustannuksien alentamiseksi.

Sahojen energiajärjestelmien kehittäminen

Tyypillisesti sahoilla tarvittava lämpö tuotetaan omalla lämpölaitoksella, jossa hyödynnetään sahalla syntyviä sivutuotteita kuten kuorta ja purua. Lämmöntuotantoon ei yleensä käytetä lainkaan öljyä. Jos lämpölaitoksen teho ei riitä tai lämmöntuotannossa syntyy katkoksia, tyydytään rajoittamaan tuotantoa tai annetaan sahatavaran laadun kärsiä. Diplomityössä etsitään taloudellisesti kannattavia konsepteja, joilla voidaan parantaa lämmöntuotannon varmuutta sahoilla. Työssä tarkastellaan sahoja kolmessa eri kokoluokassa, kattaen yleisimmät sahalaitokset. Koska diplomityöhön ei otettu malliksi mitään tiettyä sahaa, määritettiin em. kolmelle kokoluokalle materiaali- ja energiavirrat yleisten tunnuslukujen perusteella. Lisäksi sahoille määritettiin kuivaustiedot, kun kaikilla sahoilla oletettiin olevan ainoastaan kamarikuivaamoita. Sahojen käyttämä kuori on kosteaa, ja se asettaa käytettävälle polttotekniikalle korkeat vaatimukset. Kuoren lämpöarvoa voidaan parantaa kuivattamalla sitä ennen polttoa erillisessä kuivurissa. Diplomityössä tarkastellaan suoraa ja epäsuoraa kuivatusta, joista molemmat perustuvat kiertoleijutekniikkaan. Suorassa kuivatuksessa hyödynnetään kattilasta saatavia savukaasuja, kun taas epäsuorassa kuivatuksessa lämmönlähteenä käytetään kuuma vettä. Molempien kuivatuskonseptien osalta käydään läpi toimintaperiaate ja kytkentä lämpölaitokseen, sekä lasketaan lämmöntuotannon omakustannushinta. Lisäksi tarkastellaan suoran kuivatuksen asentamista nykyiseen kostean polttoaineen laitokseen. Kuoren kuivatuksen lisäksi arvioidaan kuumavesikattilan käyttöä sahoilla ja sahatavaran kuivauksessa tarvittavan erillisen höyrynkehityksen korvaamista kuumavesiakulla. Lopuksi diplomityössä tarkastellaan pienimuotoista sähköntuotantoa sahojen lämpölaitosten yhteydessä ja sen kannattavuutta. Tarkasteltavia tekniikoita ovat ORC –tekniikka sekä höyrykone.

Characterization Method for Comminution Behavior of Limestone and Fuel Ash in a Circulating Fluidized Bed Boiler

Työn tavoite oli kehittää karakterisointimenetelmät kalkkikiven ja polttoaineen tuhkan jauhautumisen ennustamiselle kiertoleijukattilan tulipesässä. Kiintoainekäyttäytymisen karakterisoinnilla ja mallintamisella voidaan tarkentaa tulipesän lämmönsiirron ja tuhkajaon ennustamista. Osittain kokeelliset karakterisointimenetelmät perustuvat kalkkikiven jauhautumiseen laboratoriokokoluokan leijutetussa kvartsiputkireaktorissa ja tuhkan jauhatumiseen rotaatiomyllyssä. Karakterisointimenetelmät ottavat huomioon eri-laiset toimintaolosuhteet kaupallisen kokoluokan kiertoleijukattiloissa. Menetelmät kelpoistettiin kaupallisen kokoluokan kiertoleijukattiloista mitattujen ja fraktioittaisella kiintoainemallilla mallinnettujen taseiden avulla. Kelpoistamistaseiden vähäisyydestä huolimatta karakterisointimenetelmät arvioitiin virhetarkastelujen perusteella järkeviksi. Karakterisointimenetelmien kehittämistä ja tarkentamista tullaan jatkamaan.

Akku ja vetypolttokenno sähköauton voimanlähteenä

Tässä kandidaatintyössä on käsitelty akkuja ja vetypolttokennoja sähköauton voimanlähteenä. Työssä on esitelty sähköautojen ja niiden voimanlähteiden teknologioiden periaatteita, energiankantajia, hyötysuhteita ja päästöjä. Lisäksi on tarkasteltu polttomoottorikäyttöisiä autotekniikoita vertailukohdan saamiseksi. Työn lopuksi on analysoitu sähköautojen markkinoita ja niiden yleistymiseen vaikuttavia tekijöitä. Sähköautot mahdollistavat vaihtoehtoisten energialähteiden käytön, joka antaa tilaisuuden saasteiden ja päästöjen keskitettyyn vähentämiseen ja talteenottoon. Niiden avulla päästään myös pois öljyriippuvuudesta ja paikallisesti aiheutuneista päästöistä. Nykyisten polttoaineiden helpon käsiteltävyyden, kohtuullisien energiatiheyksien ja laajojen infrastruktuurien vuoksi käytössä olevien tekniikoiden syrjäyttäminen on vaikeaa. Uusien tekniikoiden etuja ja haittoja voidaan tarkastella yksinkertaisilla metodeilla, kuten kustannusten, hyötysuhteiden, päästöjen ja polttoaineiden elinkaarien vertailulla. Vertailua vaikeuttaa tosin hintatasojen ja verotuksen eroavaisuudet eri maissa, ja se on siksi suoritettava osin maakohtaisesti. Suurimpia esteitä uusille tekniikoille ovat tällä hetkellä niiden tuomat lisäkustannukset, infrastruktuurien puuttuminen ja nykyisten polttoaineiden korvaaminen toisella.

Gamma spectrometry and gamma and X-ray tomography of nuclear fuel

The purpose of gamma spectrometry and gamma and X-ray tomography of nuclear fuel is to determine both radionuclide concentration and integrity and deformation of nuclear fuel. The aims of this thesis have been to find out the basics of gamma spectrometry and tomography of nuclear fuel, to find out the operational mechanisms of gamma spectrometry and tomography equipment of nuclear fuel, and to identify problems that relate to these measurement techniques. In gamma spectrometry of nuclear fuel the gamma-ray flux emitted from unstable isotopes is measured using high-resolution gamma-ray spectroscopy. The production of unstable isotopes correlates with various physical fuel parameters. In gamma emission tomography the gamma-ray spectrum of irradiated nuclear fuel is recorded for several projections. In X-ray transmission tomography of nuclear fuel a radiation source emits a beam and the intensity, attenuated by the nuclear fuel, is registered by the detectors placed opposite. When gamma emission or X-ray transmission measurements are combined with tomographic image reconstruction methods, it is possible to create sectional images of the interior of nuclear fuel. MODHERATO is a computer code that simulates the operation of radioscopic or tomographic devices and it is used to predict and optimise the performance of imaging systems. Related to the X-ray tomography, MODHERATO simulations have been performed by the author. Gamma spectrometry and gamma and X-ray tomography are promising non-destructive examination methods for understanding fuel behaviour under normal, transient and accident conditions.

Research of wood fuel market in Ukraine and the Republic of Belarus

The goal of the present work was to describe the wood fuel market of Ukraine and the Republic of Belarus, to estimate wood fuel potential and to research opportunities of wood fuel trading. Nowadays the wood waste, wood residues and by-products are becoming more and more potential raw materials for energy production. Against the background of unstable prices of traditional energy sources and environmental degradation, European States are planning to get 12% of energy from alternative sources already in 2010. Wastes of wood-working and agricultural productions are such sources. At present time the most popular wood biofuels are wood pellets, briquettes, wood chips and logs. Ukraine and the Republic of Belarus have a rather big potential of wood fuel resources. But wood fuels markets of these countries are on the entry level and quite disorganized. There is almost no domestic usage of wood biofuel. All produced pellets, briquettes as well as wood chips and logs go to the export, but the volumes are not high at present time. Ukraine and the Republic of Belarus have a very suitable geographical location. The most promising directions of wood fuel trading are developed wood fuel markets of Northern countries, Austria, Germany as well as actively developing markets of Poland and Hungary. At the long distance truck and sea transportation are the most appropriate. At a short distance cheap transportation by rail is more suitable. Thereby export is a potential opportunity for development of wood fuel production and in the future for usage in the researched countries.

Research of wood fuel market in North-West of Russia

The main purposes of this study are analyzing of forest sector of North-West and research of potentials of wood fuel market in this region. Research is focused on definition of the most perspective areas for export of wood fuel: logging residues, industrial wood processing residues, pellets and briquettes. Russian wood energy industry is very young in comparison with European countries. Nowadays there are no support and serious attention from the government to this sector. Hence almost all wood fuel market is oriented to the Western Europe. Export of wood fuel is dominated over the internal consumption. Pellet production in North –West is rapidly growing. Despite internal market has been developed the lion's share of pellets goes to export. Part of industrial wood processing residues is used by producers for their own goals, part goes to the export and rest of them is not used at all. Logging residues as raw materials for fuel have great potentials; most of them are left in a forest. Special techniques for their processing are too expensive for Russian entrepreneur. Some parts of North –West, which are situated close to the border with European countries, are potential for export. Political, economical and logistical challenges are complicated facilities for foreign customer to purchase wood fuel in remote parts of North-West. However some decisions for solving this problem exist and Russian manufactures are still interested in export of their products.

Sustainability of palm oil production and opportunities for Finnish technology and know-how transfer

The global demand for palm oil is growing, thus prompting an increase in the global production particularly in Malaysia and Indonesia. Such increasing demand for palm oil is due to palm oil’s relatively cheap price and versatile advantage both in edible and non-edible applications. Along with the increasing demand for palm oil, particularly for the production of biofuel, is a heated debate on its sustainability. Ecological degradation, climate change and social issues are among the main sustainability issues pressing the whole palm oil industry today. Clean Development Mechanism (CDM) projects fulfilling the imperatives of the Kyoto Protocol are starting to gain momentum in Malaysia as reflected by the increasing registration of CDM projects in the palm oil mills. Most CDM projects in palm oil mills are on waste-to-energy, cocomposting, and methane recovery with the latter being the most common. The study on greenhouse gases (GHG) in the milling process points that biogas collection and energy utilisation has the greatest positive effect on GHG balance. On the other hand, empty fruit bunches (EFB) end-use as energy and high energy efficiency of the mill have the least effect on GHG balance of the mill. The range of direct GHG emissions from the palm oil mill is from 2.5 to 27 gCO2e/MJCPO, while the range of GHG emissions with all indirect and avoided emissions included is from -9 to 29 gCO2e/MJCPO. Comparing this GHG balance result with that of the EU RES-Directive suggests a further check on the values and emissions consideration of the latter.

Explosion-proof requirements for Electrical Machines in Chemical, Oil and Gas Industry in Russia and CIS Countries

One of the main industries which form the basis of Russian Economical structure is oil and gas. This industry is also playing a significant role for CIS countries. Oil and gas industry is developing intensively attracting foreign investments. This situation is providing sustainable development of machinery production for hazardous areas. Operating in oil and gas areas is always related with occurrence of explosion gas atmospheres. Machines for hazardous areas must be furnished with additional protection of different types. Explosion protection is regulated with standards according to which equipment must be manufactured. In Russia and CIS countries explosion-proof equipment must be constructed in compliance with GOST standards. To confirm that equipment is manufactured according to standards’ requirements and is safe and reliable it must undergo the approval procedure. Certification in Russia is governed by Federal Laws and legislation. Each CIS country has its own approval certificates and permissions for operating in hazardous areas.

Effect of forest-based biofuels production on carbon footprint, Case: Integrated LWC paper mill

International energy and climate strategies also set Finland’s commitments to increasing the use of renewable energy sources and reducing greenhouse gas emissions. The target can be achieved by, for example, increasing the use of energy wood. Finland’s forest biomass potential is significant compared with current use. Increased use will change forest management and wood harvesting methods however. The thesis examined the potential for integrated pulp and paper mills to increase bioenergy production. The effects of two bioenergy production technologies on the carbon footprint of an integrated LWC mill were studied at mill level and from the cradle-to-customer approach. The LignoBoost process and FT diesel production were chosen as bioenergy cases. The data for the LignoBoost process were obtained from Metso and for the FT diesel process from Neste Oil. The rest of the information is based on the literature and databases of the KCL-ECO life-cycle computer program and Ecoinvent. In both case studies, the carbon footprint was reduced. From the results, it can be concluded that it is possible to achieve a fossil-fuel-free pulp mill with the LignoBoost process. By using steam from the FT diesel process, the amount of auxiliary fuel can be reduced considerably and the bark boiler can be replaced. With a choice of auxiliary fuels for use in heat production in the paper mill and the production methods for purchased electricity, it is possible to affect the carbon footprints even more in both cases.

Assessment of Coals from Russia and Countries of Former Soviet Union for Utility Fluidized Bed Boilers

With the occurrence of fossil fuels such as oil, gas and coal we found new sources of energy that have played a critical role in the progress of our modern society. Coal is very ample compared to the other two fossil fuels. Global coal reserves at the end of 2005 were estimated at 847,5 billion tones. Along with the major energy sources, coal is the most fast growing fuel on a global basis, it provides 26% of primary energy needs and remains essential to the economies of many developed and developing countries. Coal-fired power generation accounts for 41% of the world‘s total electricity production and in some countries, such as South Africa, Poland, China, Australia, Kazakhstan and India is on very high level. Still, coal utilization represents challenges related to high emissions of air pollutants such as sulphur and nitrogen dioxides, particulate matter, mercury and carbon dioxide. In relation to these a number of technologies have been developed and are in marketable use, with further potential developments towards ―Near Zero Emission‖ coal plants. In present work, coals mined in Russia and countries of Former Soviet Union were reviewed. Distribution of coal reserves on the territory of Russia and the potential for power generation from coal-fired plants across Russia was shown. Physical and chemical properties of coals produced were listed and examined, as main factor influencing on design of the combustion facility and incineration process performance. The ash-related problems in coal-fired boilers were described. The analysis of coal ash of Russia and countries of Former Soviet Union were prepared. Feasible combustion technologies also were reviewed.