An Infant with Food Allergy and Eczema in the Family – The Mental and Economic Burden of Caring

Allergic diseases including food allergy and eczema in an infant in combination with the everyday activities of caring for a family will pose challenges to parents. Only fragments of these challenges are revealed to health care professionals. Families have varying mental, social and economic resources to help them care for an allergic infant, and all such resources are important in determining how families succeed in meeting these challenges and the quality of the infant’s care. This study evaluated the whole burden to the family caused by an infant's allergic disease during the first 24 months of life. As the primary caregiver during this period is usually the mother, her perspective was considered important. Ecocultural theory, which considers families as capable of modifying the positive and negative forces facing them, was taken as the frame of reference. Data were collected as part of an ongoing prospective mother-infant study, and the methods included severity scoring of atopic dermatitis, dietary records, health-related quality of life measurements and assessments of the use of health care services and medications for treating the infant’s eczema, food allergy and asthma. Interviews with mothers were analysed by deductive content analysis on the basis of ecocultural theory and the family empowerment model. The theme “Living an ordinary family life” guided the organization of family activities essential for treating the infant's food allergy and eczema. These activities were sources of both strain and support for the mothers, the allergy-related supporting factors being the mother’s own knowledge of the allergy, hopes for an improvement in the infant’s condition, social support and work. An infant’s food allergy at the age of one year caused considerable strain for the mother in cases where the introduction of new foods into the child’s diet was delayed. This delay was still causing the mother additional strain when the child was 24 months of age. The infants waking at night at the ages of 12 and 24 months because of itching related to eczema caused strain for the mothers. The infants’ health-related quality of life was impaired at ages of 6 and 12 months compared with healthy infants. The principal reasons for impairments were itching, scratching and sleep disturbances at 6 and 12 months and treatment difficulties at 6 months. Problems with getting to sleep were reported at all stages irrespective of eczema and were also present in healthy infants. The economic impact of the treatment of allergic diseases on families during the first 24 months was 131 EUR (2006 value) in cases of eczema and 525 EUR in cases of food allergy. From the societal perspective, the costs of food allergy were a median of 3183 EUR (range 628–11 560 EUR) and of eczema a median of 275 EUR (range 94–1306 EUR). These large variations in costs in food allergy and eczema indicate that disease varies greatly . In conclusion, food allergy and eczema cause extra activities and costs to families which arrange these disease-related activities in such a way that they support the leading family theme “Living an ordinary family life”. Health care professionals should consider this thematic character of family life and disease-related activities in order to ensure that new treatments are sustainable, meaningful and tailored to daily activities. In addition, those mothers who are experiencing difficulties with food allergic infants or infants with eczema should be recognized early and provided with individual encouragement and support from health clinics. In the light of the present results, early detection of symptoms and effective parental guidance can contribute to the well-being and health-related quality of life of the child and family.

Centre for Economic Development, Transport and the Environment : Prosperity, competitiveness, sustainable development

Broschure of Centre for Economic Development, Transport and the Environment.

Strategy for 2012–2015 : The Centres for Economic Development, Transport and the Environment create sustainable well-being

ELY Centres strategy brocshure.

Centres for Economic Development, Transport and the Environment at Your Service

Broschure of The Centres for Economic Development, Transport and the Environment.

Modeling and Control of the Power Conversion Unit in a Solid Oxide Fuel Cell Environment

In this doctoral thesis, a power conversion unit for a 10 kWsolid oxide fuel cell is modeled, and a suitable control system is designed. The need for research was identified based on an observation that there was no information available about the characteristics of the solid oxide fuel cell from the perspective of power electronics and the control system, and suitable control methods had not previously been studied in the literature. In addition, because of the digital implementation of the control system, the inherent characteristics of the digital system had to be taken into account in the characteristics of the solid oxide fuel cell (SOFC). The characteristics of the solid oxide fuel cell as well the methods for the modeling and control of the DC/DC converter and the grid converter are studied by a literature survey. Based on the survey, the characteristics of the SOFC as an electrical power source are identified, and a solution to the interfacing of the SOFC in distributed generation is proposed. A mathematical model of the power conversion unit is provided, and the control design for the DC/DC converter and the grid converter is made based on the proposed interfacing solution. The limit cycling phenomenon is identified as a source of low-frequency current ripple, which is found to be insignificant when connected to a grid-tied converter. A method to mitigate a second harmonic originating from the grid interface is proposed, and practical considerations of the operation with the solid oxide fuel cell plant are presented. At the theoretical level, the thesis discusses and summarizes the methods to successfully derive a model for a DC/DC converter, a grid converter, and a power conversion unit. The results of this doctoral thesis can also be used in other applications, and the models and methods can be adopted to similar applications such as photovoltaic systems. When comparing the results with the objectives of the doctoral thesis, we may conclude that the objectives set for the work are met. In this doctoral thesis, theoretical and practical guidelines are presented for the successful control design to connect a SOFC-based distributed generation plant to the utility grid.

Entrepreneurial orientation in small and medium-sized enterprises during economic crisis

The economic importance of small and medium-sized enterprises (SMEs) and entrepreneurship has increased significantly in recent decades and entrepreneurial activity and SMEs are deemed vital to economic progress. Therefore, it is justifiable to study how small firms and entrepreneurs can enhance their performance and emergence in the turbulent economic environment. The concept of entrepreneurial orientation (EO) has recently attracted considerable attention in the field of entrepreneurship research. EO generally refers to a firm’s propensity to be innovative, to be proactive and to take risks. A majority of EO studies so far have found that adopting EO associated entrepreneurial behaviors will help firms to create or sustain a high level of performance. This dissertation explores the main drivers and performance implications of EO for SMEs in time of economic crisis. Hence the first objective of this dissertation is to examine the performance implications of EO and to test the role of EO on how firms are treated by the crisis at operative level. The second objective is to expand the prevailing understanding of determinants of EO by exploring the relationship between owner's work related values, attitudes, demographic characteristics, firm’s financial resources and EO. EO was found to be a significant and positive factor behind a firm’s long run growth. Hence it can be said that EO has positive implications for firm performance. But on the other hand, during a time of economic crisis the different dimensions of EO had both positive and negative effects on performance of SMEs. The performance implications varied across different stages of the crisis and were also dependent on what measure was used for measuring the performance. The main drivers of EO in SMEs were the personal work related values of the entrepreneur and his/her prior experience as an entrepreneur. The intrinsic work values related to interest, responsibility, challenge, self-development or intellectual stimulation and values related to status, power, achievement and recognition had a positive effect on the level of EO. On the other hand, extrinsic values related to high income, material possessions, benefits such as generous holidays, job security, and comfort through good working conditions decreased the level of EO

Towards sustainable Iron- and steelmaking with economic optimization

The iron and steelmaking industry is among the major contributors to the anthropogenic emissions of carbon dioxide in the world. The rising levels of CO2 in the atmosphere and the global concern about the greenhouse effect and climate change have brought about considerable investigations on how to reduce the energy intensity and CO2 emissions of this industrial sector. In this thesis the problem is tackled by mathematical modeling and optimization using three different approaches. The possibility to use biomass in the integrated steel plant, particularly as an auxiliary reductant in the blast furnace, is investigated. By pre-processing the biomass its heating value and carbon content can be increased at the same time as the oxygen content is decreased. As the compression strength of the preprocessed biomass is lower than that of coke, it is not suitable for replacing a major part of the coke in the blast furnace burden. Therefore the biomass is assumed to be injected at the tuyere level of the blast furnace. Carbon capture and storage is, nowadays, mostly associated with power plants but it can also be used to reduce the CO2 emissions of an integrated steel plant. In the case of a blast furnace, the effect of CCS can be further increased by recycling the carbon dioxide stripped top gas back into the process. However, this affects the economy of the integrated steel plant, as the amount of top gases available, e.g., for power and heat production is decreased. High quality raw materials are a prerequisite for smooth blast furnace operation. High quality coal is especially needed to produce coke with sufficient properties to ensure proper gas permeability and smooth burden descent. Lower quality coals as well as natural gas, which some countries have in great volumes, can be utilized with various direct and smelting reduction processes. The DRI produced with a direct reduction process can be utilized as a feed material for blast furnace, basic oxygen furnace or electric arc furnace. The liquid hot metal from a smelting reduction process can in turn be used in basic oxygen furnace or electric arc furnace. The unit sizes and investment costs of an alternative ironmaking process are also lower than those of a blast furnace. In this study, the economy of an integrated steel plant is investigated by simulation and optimization. The studied system consists of linearly described unit processes from coke plant to steel making units, with a more detailed thermodynamical model of the blast furnace. The results from the blast furnace operation with biomass injection revealed the importance of proper pre-processing of the raw biomass as the composition of the biomass as well as the heating value and the yield are all affected by the pyrolysis temperature. As for recycling of CO2 stripped blast furnace top gas, substantial reductions in the emission rates are achieved if the stripped CO2 can be stored. However, the optimal recycling degree together with other operation conditions is heavily dependent on the cost structure of CO2 emissions and stripping/storage. The economical feasibility related to the use of DRI in the blast furnace depends on the price ratio between the DRI pellets and the BF pellets. The high amount of energy needed in the rotary hearth furnace to reduce the iron ore leads to increased CO2 emissions.

NIR-Vis Up-Conversion Luminescence in the Yb3+,Er3+ Doped Y2O2S, ZrO2, and NaYF4 Nanomaterials

Since the discovery of the up-conversion phenomenon, there has been an ever increasing interest in up-converting phosphors in which the absorption of two or more low energy photons is followed by emission of a higher energy photon. Most up-conversion luminescence materials operate by using a combination of a trivalent rare earth (lanthanide) sensitizer (e.g. Yb or Er) and an activator (e.g. Er, Ho, Tm or Pr) ion in a crystal lattice. Up-converting phosphors have a variety of potential applications as lasers and displays as well as inks for security printing (e.g. bank notes and bonds). One of the most sophisticated applications of lanthanide up-conversion luminescence is probably in medical diagnostics. However, there are some major problems in the use of photoluminescence based on the direct UV excitation in immunoassays. Human blood absorbs strongly UV radiation as well as the emission of the phosphor in the visible. A promising way to overcome the problems arising from the blood absorption is to use a long wavelength excitation and benefit from the up-conversion luminescence. Since there is practically no absorption by the whole-blood in the near IR region, it has no capability for up-conversion in the excitation wavelength region of the conventional up-converting phosphor based on the Yb3+ (sensitizer) and Er3+ (activator) combination. The aim of this work was to prepare nanocrystalline materials with high red (and green) up-conversion luminescence efficiency for use in quantitative whole-blood immunoassays. For coupling to biological compounds, nanometer-sized (crystallite size below 50 nm) up-converting phosphor particles are required. The nanocrystalline ZrO2:Yb3+,Er3+, Y2O2S:Yb3+,Er3+, NaYF4:Yb3+,Er3+ and NaRF4-NaR’F4 (R: Y, Yb, Er) materials, prepared with the combustion, sol-gel, flux, co-precipitation and solvothermal synthesis, were studied using the thermal analysis, FT-IR spectroscopy, transmission electron microscopy, EDX spectroscopy, XANES/EXAFS measurements, absorption spectroscopy, X-ray powder diffraction, as well as up-conversion and thermoluminescence spectroscopies. The effect of the impurities of the phosphors, crystallite size, as well as the crystal structure on the up-conversion luminescence intensity was analyzed. Finally, a new phenomenon, persistent up-conversion luminescence was introduced and discussed. For efficient use in bioassays, more work is needed to yield nanomaterials with smaller and more uniform crystallite sizes. Surface modifications need to be studied to improve the dispersion in water. On the other hand, further work must be carried out to optimize the persistent up-conversion luminescence of the nanomaterials to allow for their use as efficient immunoassay nanomaterials combining the advantages of both up-conversion and persistent luminescence.

Vertaileva tutkimus suomalaisten päivittäistavara kaupan alan yritysten likviditeetin hallinnasta vuosina 2009 - 2013

Tämän Pro gradu -tutkielman aiheena on tutkia suomalaisten päivittäistavarakaupan alan yritysten likviditeetin hallintaa vuosina 2009 - 2013. Tutkielmassa tutkitaan, millä tavalla suomalaisten päivittäistavarakaupan alan yritysten käyttöpääoman hallinta on muuttunut rajatulla ajanjaksolla. Lisäksi työssä tutkitaan millä tavoin valikoitujen yritysten kannattavuus, maksuvalmius ja vakavaraisuus ovat muuttuneet vuosina 2009 - 2013. Tutkimuksessa tarkastellaan myös, miten suomalainen päivittäistavarakauppa on kehittynyt tarkasteluajanjaksolla. Tutkimus on rajattu koskemaan neljää suurinta suomalaista päivittäistavarakaupan, pois lukien Lild Suomi Ky taloudellisten tietojen puuttumisen takia, alan ryhmittymää käyttäen kriteerinä vuoden 2013 päivittäistavaramyyntiä sekä markkinaosuuksia. Edellä mainittujen kriteerien perusteella tutkimukseen valikoitui seuraavat ryhmittymät: S-ryhmä, K-ryhmä, Suomen Lähikauppa Oy sekä Stockmann Oyj Abp.Teoriapohjaan tutkimuksessa käytetään aikaisempaa kirjallisuutta ja julkaistuja akateemisia tutkimuksia toimitusketjun ja sen hallinnasta, sekä käyttöpääomasta ja sen hallinnasta. Valikoitujen yritysten tilinpäätöstiedot on koottu Virre -tietokannasta ja toimiala tiedot tilastokeskuksen ohjelmalla PC -Axis 2008. Tutkimuksessa havaittiin käyttöpääomaprosentin ja quick ratio - tunnusluvun välillä pieniä yhtymäkohtia. Kun käyttöpääomaprosentti pienenee, quick ratio -tunnusluku paranee. Käyttöpääomaprosentin muutoksilla oli negatiivinen korrelaatio koko pääoman tuottoprosenttiin sekä liikevoittoprosenttiin. Tutkimuksen kohdeyritykset ovat pystyneet pitämään käyttöpääomaprosentin erilaisilla tehostamistoiminnoilla hyvin tasaisena tiukasta taloustilanteesta huolimatta.