Design Aspects of Megawatt-Range Direct-Driven Permanent MagnetWind Generators

Direct-driven permanent magnet synchronous generator is one of the most promising topologies for megawatt-range wind power applications. The rotational speed of the direct-driven generator is very low compared with the traditional electrical machines. The low rotational speed requires high torque to produce megawatt-range power. The special features of the direct-driven generators caused by the low speed and high torque are discussed in this doctoral thesis. Low speed and high torque set high demands on the torque quality. The cogging torque and the load torque ripple must be as low as possible to prevent mechanical failures. In this doctoral thesis, various methods to improve the torque quality are compared with each other. The rotor surface shaping, magnet skew, magnet shaping, and the asymmetrical placement of magnets and stator slots are studied not only by means of torque quality, but also the effects on the electromagnetic performance and manufacturability of the machine are discussed. The heat transfer of the direct-driven generator must be designed to handle the copper losses of the stator winding carrying high current density and to keep the temperature of the magnets low enough. The cooling system of the direct-driven generator applying the doubly radial air cooling with numerous radial cooling ducts was modeled with a lumped-parameter-based thermal network. The performance of the cooling system was discussed during the steady and transient states. The effect of the number and width of radial cooling ducts was explored. The large number of radial cooling ducts drastically increases the impact of the stack end area effects, because the stator stack consists of numerous substacks. The effects of the radial cooling ducts on the effective axial length of the machine were studied by analyzing the crosssection of the machine in the axial direction. The method to compensate the magnet end area leakage was considered. The effect of the cooling ducts and the stack end area effects on the no-load voltages and inductances of the machine were explored by using numerical analysis tools based on the three-dimensional finite element method. The electrical efficiency of the permanent magnet machine with different control methods was estimated analytically over the whole speed and torque range. The electrical efficiencies achieved with the most common control methods were compared with each other. The stator voltage increase caused by the armature reaction was analyzed. The effect of inductance saturation as a function of load current was implemented to the analytical efficiency calculation.

Andean indigenous food crops: nutritional value and bioactive compounds

The Andean area of South America is a very important center for the domestication of food crops. This area is the botanical origin of potato, peanut and tomato. Less well- known crops, such as quinoa (Chenopodium quinoa), kañiwa (Chenopodium pallidicaule) and kiwicha (Amaranthus caudatus), were also domesticated by ancient Andean farmers. These crops have a long history of safe use with the local populations and they have contributed to the nutrition and wellbeing of the people for centuries. Several studies have reported the nutritional value of Andean grains. They contain proteins with a balanced essential amino acid composition that are of high biological value, good quality oil and essential minerals, for example iron, calcium and zinc. They are potential sources of bioactive compounds such as polyphenols and dietary fiber. The main objective of the practical work was to assess the nutritional value of Andean native grains with a special emphasis on the bioactive components and the impact of processing. The compounds studied were phenolic acids, flavonoids, betalains and dietary fiber. The radical scavenging activity was measured as well. Iron, calcium and zinc content and their bioavailability were analyzed as well. The grains were processed by extrusion with the aim to study the effect of processing on the chemical composition. Quinoa, kañiwa and kiwicha are very good sources of dietary fiber, especially of insoluble dietary fiber. The phenolic acid content in Andean crops was low compared with common cereals like wheat and rye, but was similar to levels found in oat, barley, corn and rice. The flavonoid content of quinoa and kañiwa was exceptionally high. Kiwicha did not contain quantifiable amounts of these compounds. Only one variety of kiwicha contained low amounts of betalains. These compounds were not detected in kañiwa or quinoa. Quinoa, kañiwa and kiwicha are good sources of minerals. Their calcium, zinc and iron content are higher than the content of these minerals in common cereals. In general, roasting did not affect significantly mineral bioavailability. On the contrary, in cooked grains, there was an increase in bioavailability of zinc and, in the case of kañiwa, also in iron and calcium bioavailability. In all cases, the contents of total and insoluble dietary fiber decreased during the extrusion process. At the same time, the content of soluble dietary fiber increased. The content of total phenolics, phytic acid and the antioxidant activity decreased in kiwicha varieties during the extrusion process. In the case of quinoa, the content of total phenolic compounds and the radical scavenging activity increased during the extrusion process in all varieties. Taken together, the studies presented here demonstrate that the Andean indigenous crops have excellent potential as sources of minerals, flavonoids and dietary fiber. Further studies should be conducted to characterize the phenolic compound and antioxidant composition in processed grains and end products. Quinoa, kañiwa and kiwicha grains are consumed widely in Andean countries but they also have a significant, worldwide potential as a new cultivated crop species and as an imported commodity from South America. Their inclusion in the diet has the potential to improve the intake of minerals and health-promoting bioactive compounds. They may also be interesting raw materials for special dietary foods and functional foods offering natural sources of specific health-promoting components.

DFMA Aspects in the Design of a Transfer Line for Off-line Ion Sources

In this thesis, the DFMA is presented and used for the purpose of having a design for a vertical transfer line that can be easily manufactured and assembled. The design of the transfer line, the major components and drawings are presented. The ease of assembly, the costs of manufacturing and differences between the use of steel structure and aluminum are compared. The ALARA principle is followed to minimize the risk of radiation exposure by the means of locating the test ion sources outside the radioactive area.

Combinatorics on Words. New Aspects on Avoidability, Defect Effect, Equations and Palindromes

In this thesis we examine four well-known and traditional concepts of combinatorics on words. However the contexts in which these topics are treated are not the traditional ones. More precisely, the question of avoidability is asked, for example, in terms of k-abelian squares. Two words are said to be k-abelian equivalent if they have the same number of occurrences of each factor up to length k. Consequently, k-abelian equivalence can be seen as a sharpening of abelian equivalence. This fairly new concept is discussed broader than the other topics of this thesis. The second main subject concerns the defect property. The defect theorem is a well-known result for words. We will analyze the property, for example, among the sets of 2-dimensional words, i.e., polyominoes composed of labelled unit squares. From the defect effect we move to equations. We will use a special way to define a product operation for words and then solve a few basic equations over constructed partial semigroup. We will also consider the satisfiability question and the compactness property with respect to this kind of equations. The final topic of the thesis deals with palindromes. Some finite words, including all binary words, are uniquely determined up to word isomorphism by the position and length of some of its palindromic factors. The famous Thue-Morse word has the property that for each positive integer n, there exists a factor which cannot be generated by fewer than n palindromes. We prove that in general, every non ultimately periodic word contains a factor which cannot be generated by fewer than 3 palindromes, and we obtain a classification of those binary words each of whose factors are generated by at most 3 palindromes. Surprisingly these words are related to another much studied set of words, Sturmian words.

Alterations in The States and Contents of Consciousness: Empirical and Theoretical Aspects

The main purpose of the present doctoral thesis is to investigate subjective experiences and cognitive processes in four different types of altered states of consciousness: naturally occurring dreaming, cognitively induced hypnosis, pharmacologically induced sedation, and pathological psychosis. Both empirical and theoretical research is carried out, resulting in four empirical and four theoretical studies. The thesis begins with a review of the main concepts used in consciousness research, the most influential philosophical and neurobiological theories of subjective experience, the classification of altered states of consciousness, and the main empirical methods used to study consciousness alterations. Next, findings of the original studies are discussed, as follows. Phenomenal consciousness is found to be dissociable from responsiveness, as subjective experiences do occur in unresponsive states, including anaesthetic-induced sedation and natural sleep, as demonstrated by post-awakening subjective reports. Two new tools for the content analysis of subjective experiences and dreams are presented, focusing on the diversity, complexity and dynamics of phenomenal consciousness. In addition, a new experimental paradigm of serial awakenings from non-rapid eye movement sleep is introduced, which enables more rapid sampling of dream reports than has been available in previous studies. It is also suggested that lucid dreaming can be studied using transcranial brain stimulation techniques and systematic analysis of pre-lucid dreaming. For blind judges, dreams of psychotic patients appear to be indistinguishable from waking mentation reports collected from the same patients, which indicates a close resemblance of these states of mind. However, despite phenomenological similarities, dreaming should not be treated as a uniform research model of psychotic or intact consciousness. Contrary to this, there seems to be a multiplicity of routes of how different states of consciousness can be associated. For instance, seemingly identical time perception distortions in different alterations of consciousness may have diverse underlying causes for these distortions. It is also shown that altered states do not necessarily exhibit impaired cognitive processing compared to a baseline waking state of consciousness: a case study of time perception in a hypnotic virtuoso indicates a more consistent perceptual timing under hypnosis than in a waking state. The thesis ends with a brief discussion of the most promising new perspectives for the study of alterations of consciousness.

Multiple sclerosis and pregnancy: clinical and immunological aspects

Background: Multiple Sclerosis (MS) is an autoimmune disease of the central nervous system that affects most commonly young women in their childbearing age. Previous studies have shown that MS relapse rate usually reduces during pregnancy and increases again after delivery. Patients with MS and their treating physicians are interested to know more about the risks the disease can cause to pregnancy and how pregnancy affects the disease. The reasons for increased relapse rate after delivery are not entirely clear, but loss of pregnancy related immune tolerance and changes in the hormonal status at the time of delivery seem to be of relevance. Aims and methods: The aims of this study were to follow the natural course of MS during and after pregnancy, evaluate pregnancy related risks among MS patients, follow the inflammatory response of MS patients during and after pregnancy and clarify the risk of relevant co-morbidities known to affect other autoimmune diseases after pregnancy and compare these results to healthy controls. This study was a part of a prospective nation-wide follow-up study of 60 Finnish MS patients. All eligible MS patients were enrolled in the study during the years 2003-2005. A prospective followup continued from early pregnancy until six months postpartum. MS relapses, EDSS scores and obstetric details were recorded. Blood samples were obtained from the patients at early, middle, and late pregnancy, after delivery and one month, three months and six months postpartum. Results: MS patients were no more likely to experience pregnancy or delivery complications than the Finnish mothers in general. The need of instrumental assistance, however, was higher among mothers with MS. Disease activity followed the course seen in previous studies. The majority of mothers (90.2%) breastfed their babies. Contrary to previous results, breastfeeding did not protect MS patients from disease worsening after delivery in present study. Mothers with active pre-pregnancy disease chose to breastfeed less frequently and started medication instead. MS patients presented with higher prevalence of elevated thyroid autoantibodies postpartum than healthy controls, but the rate of thyroid hormonal dysfunction was similar as that of healthy controls. The mode of delivery nor the higher rate of tissue damage assessed with C-reactive protein concentration were not predictive of postpartum relapses. The prevalence of gestational diabetes was slightly higher among mothers with MS compared to Finnish mothers in general, but postpartum depression was observed in similar rates. MS patients presented with significantly lower serum concentrations of vitamin D during pregnancy and postpartum than healthy controls. Conclusions: Childbearing can be regarded as safe for mothers with MS as it is for healthy mothers in general. Breastfeeding can be recommended, but it should be done only after careful evaluation of the individual risk for postpartum disease activation. Considering MS patients tend to develop thyroid antibody positivity after delivery more often than healthy controls and that certain treatments can predispose MS patients to thyroid hormonal dysfunction, we recommend MS mothers to be screened for thyroid abnormalities during pregnancy and after delivery. Increased risk for gestational diabetes should be kept in mind when following MS mothers and glucose tolerance test in early pregnancy should be considered. Adequate vitamin D supplementation is essential for MS mothers also during pregnancy and postpartum period.

Marketing of fire suppression systems: customer value and institutional aspects

The paper studied marketing of automatic fire suppression systems from the perspectives of customer value and institutions. The object of the study was research the special features of the sales and marketing of fire suppression systems, and find some practical applications for sales, and for lobbying of a new fire suppression technology. The theoretical background of the study was in the customer value literature and the theoretical concept of institutional entrepreneurship. The research was conducted as an electronic survey for three different groups of respondents; end customers, solution integrators, and re-sellers. From the answers was gathered generalisations about the customer value assessment and communication of the value related to the sales and marketing processes of the fire suppression systems. In addition, there was observed manners to receive information about the systems, and effects caused by institutions to the decision making of the different parties involved. The findings of the study support companies that are launching a new safety technology to the market focus their marketing, and help to understand institutional forces that are affecting to a safety related product.

Green aspects study in game development

Context: Game development has become increasingly important in the software industry, but this importance has not affected the way software engineering approaches and methodologies manage the differences they have with game development. Similarly, software engineering does not fully support sustainability practices, causing this element to often not be considered or even known as a requirement for a development lifecycle. Goal: The aim of this thesis is to study the mode in which games are developed, and the involved sustainable aspects and the relevant concerns regarding the migration processes. Method: A quantitative study was conducted, gathering 33 answers of game professionals from four continents, from administrative (25%) and technical oriented positions (75%). Results: Three trends were observed: 1) Agile process models are used, 2) major concerns for mobile development and digital marketing, 3) minor concerns for eco-impact elements and certain development phases such as testing and crunch time development. Conclusion: Traditional Software engineering would require a major change on its processes and models to fit with modern agile development, game development approaches and sustainable requirements.