Pienen metallituotteita valmistavan yrityksen kustannuslaskentamallin kehittäminen

Tämän diplomityön tavoitteena oli rakentaa pienelle metallituotteita valmistavalle yritykselle kustannuslaskentamalli, joka olisi helppo käyttää ja ylläpitää ja joka huomioisi käytettävissä olevat resurssit ja jossa hyödynnettäisiin mahdollisimman paljon yrityksen olemassa olevia tietokoneohjelmia. Tavoitteena oli erityisesti kustannusten kohdistettavuuden parantaminen eri tuotteille ja yrityksen kustannuslaskentakäytännön dokumentointi. Kehitettävän kustannuslaskentamallin perustaksi valittiin nykytila-analyysin, valmistettavien tuotteiden, tuotantomenetelmien, yrityksen kustannusrakenteen, käytettävien resurssien ja yrityksen käytössä olevien tietokoneohjemien perusteella lisäyslaskenta. Työssä kuvattiin kustannuslaskentamallin rakentamisvaiheita ja konetuntihintojen määrittelyä. Valmista laskentamallia testattiin laskemalla viidelle erilaiselle tuotteelle omakustannushinnat. Lopuksi pohdittiin jatkokehitystarpeita.

Genetic regulatory networks in avian B cells

Biology is turning into an information science. The science of systems biology seeks to understand the genetic networks that govern organism development and functions. In this study the chicken was used as a model organism in the study of B cell regulatory factors. These studies open new avenues for plasma cell research by connecting the down regulation of the B cell gene expression program directly to the initiation of plasma cell differentiation. The unique advantages of the DT40 avian B cell model system, specifically its high homologous recombination rate, were utilized to study gene regulation in Pax5 knock out cell lines and to gain new insights into the B cell to plasma cell transitions that underlie the secretion of antibodies as part of the adaptive immune response. The Pax5 transcription factor is central to the commitment, development and maintenance of the B cell phenotype. Mice lacking the Pax5 gene have an arrest in development at the pro-B lymphocyte stage while DT40 cells have been derived from cells at a more mature stage of development. The DT40 Pax5-/- cells exhibited gene expression similarities with primary chicken plasma cells. The expression of the plasma cell transcription factors Blimp-1 and XBP-1 were significantly upregulated while the expression of the germinal centre factor BCL6 was diminished in Pax5-/- cells, and this alteration was normalized by Pax5 re-introduction. The Pax5-deficient cells further manifested substantially elevated secretion of IgM into the supernatant, another characteristic of plasma cells. These results for the first time indicated that the downregulation of the Pax5 gene in B cells promotes plasma cell differentiation. Cross-species meta-analysis of chicken and mouse Pax5 gene knockout studies uncovers genes and pathways whose regulatory relationship to Pax5 has remained unchanged for over 300 million years. Restriction of the hematopoietic stem cell fate to produce T, B and NK cell lineages is dependent on the Ikaros and its molecular partners, the closely related Helios and Aiolos. Ikaros family members are zinc finger proteins which act as transcriptional repressors while helping to activate lymphoid genes. Helios in mice is expressed from the hematopoietic stem cell level onwards, although later in development its expression seems to predominate in the T cell lineage. This study establishes the emergence and sequence of the chicken Ikaros family members. Helios expression in the bursa of Fabricius, germinal centres and B cell lines suggested a role for Helios in the avian B-cell lineage, too. Phylogenetic studies of the Ikaros family connect the expansion of the Ikaros family, and thus possibly the emergence of the adaptive immune system, with the second round of genome duplications originally proposed by Ohno. Paralogs that have arisen as a result of genome-wide duplications are sometimes termed ohnologs – Ikaros family proteins appear to fit that definition. This study highlighted the opportunities afforded by the genome sequencing efforts and somatic cell reverse genetics approaches using the DT40 cell line. The DT40 cell line and the avian model system promise to remain a fruitful model for mechanistic insight in the post-genomic era as well.

The Fed Model: International Analysis

The Fed model is a widely used market valuation model. It is often used only on market analysis of the S&P 500 index as a shorthand measure for the attractiveness of equity, and as a timing device for allocating funds between equity and bonds. The Fed model assumes a fixed relationship between bond yield and earnings yield. This relationship is often assumed to be true in market valuation. In this paper we test the Fed model from historical perspective on the European markets. The markets of the United States are also includedfor comparison. The purpose of the tests is to determine if the Fed model and the underlying assumptions come true on different markets. The various tests are made on time-series data ranging from the year 1973 to the end of the year 2008. The statistical methods used are regressions analysis, cointegration analysis and Granger causality. The empirical results do not give strong support for the Fed model. The underlying relationships assumed by the Fed model are statistically not valid in most of the markets examined and therefore the model is not valid in valuation purposes generally. The results vary between the different markets which gives reason to suspect the general use of the Fed model in different market conditions and in different markets.

Teollisuuden kunnossapitopalveluiden kustannusmalli yritysverkostossa

Tämän tutkimuksen päätavoitteena oli luoda yleisellä tasolla teollisuuden kunnossapitopalveluille kustannusmalli käytännön päätöstilanteiden avuksi. Kustannusmallin tarkoitus oli, että sitä voidaan käyttää kaikissa päätöstilanteissa, joissa pyritään vaikuttamaan kunnossapidon aiheuttamiin kustannuksiin, joko kunnossapitopalveluiden tarjoajan tai asiakkaan tai molempien toimesta. Kustannusmalli eroaa perinteisistä kustannusmalleista näkökulmansa osalta. Aiemmin kehitetyissä teollisuuden kunnossapitopalveluiden kustannusmalleissa on esitetty palveluntarjoajan omat kustannukset tai asiakkaan kustannukset, mutta ei molempia kustannuksia samanaikaisesti. Kustannusmallia testattiin pienessä yritysverkostossa, johon kuului Sellutehdas, Kunnossapitoyhtiö ja Laitetoimittaja. Verkostossa kunnossapitoprosesseja tutkittiin tapaustutkimuksen keinoin. Tutkittuja tapauksia oli yhteensä kolme kappaletta, joista kaikki sijoittuivat sellun valmistusprosessin eri vaiheisiin ja ne olivat luonteeltaan hyvin erilaisia. Työn teoriaosa pohjautuu pääasiassa teollisuuden kunnossapitoa käsitteleviin artikkeleihin, tutkimuksiin ja kirjoihin. Lisäksi käsitellään hinnoittelun ja kustannuslaskennan teoriaa. Työn empiirinen osa perustuu haastatteluihin ja yrityksiltä saatuihin kustannustietoihin. Haastattelujen ja kustannustietojen avulla testattiin kustannusmallia. Testauksen jälkeen analysoitiin saatuja tuloksia ja kustannusmallia. Työn keskeiset tulokset liittyivät siihen, mitä kustannuksia tulee huomioida kustannusmallissa ja millainen on käyttökelpoinen kustannusmalli. Kustannusmallin käyttöön ja kehittämiseen liittyi myös ongelmia, jotka tuodaan työn loppuvaiheessa esille. Keskeinen ongelma mallin käytössä oli, että yritysverkoston osapuolet eivät halunneet avata euromääräisiä kustannustietojaan vielä toisilleen. Tämän vuoksi kustannusmallissa esitetään ainoastaan kustannuserien prosentuaalisia osuuksia yritysten aiheutuneista kunnossapidon kokonaiskustannuksista. Pelkkien prosentuaalisten kustannusten analysoiminen oli haasteellisempaa, koska esimerkiksi kustannusten suuruusluokka näkyy vain euroissa.

Model development for circulating fluidized bed boiler operation

Comprehensive understanding of the heat transfer processes that take place during circulating fluidized bed (CFB) combustion is one of the most important issues in CFB technology development. This leads to possibility of predicting, evaluation and proper design of combustion and heat transfer mechanisms. The aim of this thesis is to develop a model for circulating fluidized bed boiler operation. Empirical correlations are used for determining heat transfer coefficients in each part of the furnace. The proposed model is used both in design and offdesign conditions. During off-design simulations fuel moisture content and boiler load effects on boiler operation have been investigated. In theoretical part of the thesis, fuel properties of most typical classes of biomass are widely reviewed. Various schemes of biomass utilization are presented and, especially, concerning circulating fluidized bed boilers. In addition, possible negative effects of biomass usage in boilers are briefly discussed.

Broadband excitation in the system identification of active magnetic bearing rotor systems

One of the targets of the climate and energy package of the European Union is to increase the energy efficiency in order to achieve a 20 percent reduction in primary energy use compared with the projected level by 2020. The energy efficiency can be improved for example by increasing the rotational speed of large electrical drives, because this enables the elimination of gearboxes leading to a compact design with lower losses. The rotational speeds of traditional bearings, such as roller bearings, are limited by mechanical friction. Active magnetic bearings (AMBs), on the other hand, allow very high rotational speeds. Consequently, their use in large medium- and high-speed machines has rapidly increased. An active magnetic bearing rotor system is an inherently unstable, nonlinear multiple-input, multiple-output system. Model-based controller design of AMBs requires an accurate system model. Finite element modeling (FEM) together with the experimental modal analysis provides a very accurate model for the rotor, and a linearized model of the magneticactuators has proven to work well in normal conditions. However, the overall system may suffer from unmodeled dynamics, such as dynamics of foundation or shrink fits. This dynamics can be modeled by system identification. System identification can also be used for on-line diagnostics. In this study, broadband excitation signals are adopted to the identification of an active magnetic bearing rotor system. The broadband excitation enables faster frequency response function measurements when compared with the widely used stepped sine and swept sine excitations. Different broadband excitations are reviewed, and the random phase multisine excitation is chosen for further study. The measurement times using the multisine excitation and the stepped sine excitation are compared. An excitation signal design with an analysis of the harmonics produced by the nonlinear system is presented. The suitability of different frequency response function estimators for an AMB rotor system are also compared. Additionally, analytical modeling of an AMB rotor system, obtaining a parametric model from the nonparametric frequency response functions, and model updating are discussed in brief, as they are key elements in the modeling for a control design. Theoretical methods are tested with a laboratory test rig. The results conclude that an appropriately designed random phase multisine excitation is suitable for the identification of AMB rotor systems.

Application of Computational Fluid Dynamics in Modeling Blood Flow in Human Thoracic Aorta

The aim of this study was to simulate blood flow in thoracic human aorta and understand the role of flow dynamics in the initialization and localization of atherosclerotic plaque in human thoracic aorta. The blood flow dynamics in idealized and realistic models of human thoracic aorta were numerically simulated in three idealized and two realistic thoracic aorta models. The idealized models of thoracic aorta were reconstructed with measurements available from literature, and the realistic models of thoracic aorta were constructed by image processing Computed Tomographic (CT) images. The CT images were made available by South Karelia Central Hospital in Lappeenranta. The reconstruction of thoracic aorta consisted of operations, such as contrast adjustment, image segmentations, and 3D surface rendering. Additional design operations were performed to make the aorta model compatible for the numerical method based computer code. The image processing and design operations were performed with specialized medical image processing software. Pulsatile pressure and velocity boundary conditions were deployed as inlet boundary conditions. The blood flow was assumed homogeneous and incompressible. The blood was assumed to be a Newtonian fluid. The simulations with idealized models of thoracic aorta were carried out with Finite Element Method based computer code, while the simulations with realistic models of thoracic aorta were carried out with Finite Volume Method based computer code. Simulations were carried out for four cardiac cycles. The distribution of flow, pressure and Wall Shear Stress (WSS) observed during the fourth cardiac cycle were extensively analyzed. The aim of carrying out the simulations with idealized model was to get an estimate of flow dynamics in a realistic aorta model. The motive behind the choice of three aorta models with distinct features was to understand the dependence of flow dynamics on aorta anatomy. Highly disturbed and nonuniform distribution of velocity and WSS was observed in aortic arch, near brachiocephalic, left common artery, and left subclavian artery. On the other hand, the WSS profiles at the roots of branches show significant differences with geometry variation of aorta and branches. The comparison of instantaneous WSS profiles revealed that the model with straight branching arteries had relatively lower WSS compared to that in the aorta model with curved branches. In addition to this, significant differences were observed in the spatial and temporal profiles of WSS, flow, and pressure. The study with idealized model was extended to study blood flow in thoracic aorta under the effects of hypertension and hypotension. One of the idealized aorta models was modified along with the boundary conditions to mimic the thoracic aorta under the effects of hypertension and hypotension. The results of simulations with realistic models extracted from CT scans demonstrated more realistic flow dynamics than that in the idealized models. During systole, the velocity in ascending aorta was skewed towards the outer wall of aortic arch. The flow develops secondary flow patterns as it moves downstream towards aortic arch. Unlike idealized models, the distribution of flow was nonplanar and heavily guided by the artery anatomy. Flow cavitation was observed in the aorta model which was imaged giving longer branches. This could not be properly observed in the model with imaging containing a shorter length for aortic branches. The flow circulation was also observed in the inner wall of the aortic arch. However, during the diastole, the flow profiles were almost flat and regular due the acceleration of flow at the inlet. The flow profiles were weakly turbulent during the flow reversal. The complex flow patterns caused a non-uniform distribution of WSS. High WSS was distributed at the junction of branches and aortic arch. Low WSS was distributed at the proximal part of the junction, while intermedium WSS was distributed in the distal part of the junction. The pulsatile nature of the inflow caused oscillating WSS at the branch entry region and inner curvature of aortic arch. Based on the WSS distribution in the realistic model, one of the aorta models was altered to induce artificial atherosclerotic plaque at the branch entry region and inner curvature of aortic arch. Atherosclerotic plaque causing 50% blockage of lumen was introduced in brachiocephalic artery, common carotid artery, left subclavian artery, and aortic arch. The aim of this part of the study was first to study the effect of stenosis on flow and WSS distribution, understand the effect of shape of atherosclerotic plaque on flow and WSS distribution, and finally to investigate the effect of lumen blockage severity on flow and WSS distributions. The results revealed that the distribution of WSS is significantly affected by plaque with mere 50% stenosis. The asymmetric shape of stenosis causes higher WSS in branching arteries than in the cases with symmetric plaque. The flow dynamics within thoracic aorta models has been extensively studied and reported here. The effects of pressure and arterial anatomy on the flow dynamic were investigated. The distribution of complex flow and WSS is correlated with the localization of atherosclerosis. With the available results we can conclude that the thoracic aorta, with complex anatomy is the most vulnerable artery for the localization and development of atherosclerosis. The flow dynamics and arterial anatomy play a role in the localization of atherosclerosis. The patient specific image based models can be used to diagnose the locations in the aorta vulnerable to the development of arterial diseases such as atherosclerosis.

Toimintopohjainen ennustemalli palvelualan yritykselle

Kohdeorganisaatiossa on havaittu tarvetta kustannusten tarkemmalle ennustamiselle liiketoimintaympäristön ja palvelutarjooman muutosten seurauksena. Diplomityön päätavoitteena on selvittää, kuinka palvelualan yritykselle rakennetaan toimintopohjainen kustannusten ennustemalli. Päätavoitetta lähestytään selvittämällä mallin rakennusvaiheet, soveltuvuus kohdeorganisaatiolle ja siitä saatava lisäarvo. Tutkielmassa käytetään konstruktiivista tutkimusotetta. Malli pohjautuu toimintopohjaisen suunnittelun ja budjetoinnin suljetun silmukkamallin teoriaan. Empiriaosassa suoritetaan mallin rakentaminen vaiheittain. Työn tulokset osoittavat toimintopohjaisen suunnittelun ja budjetoinnin suljetun silmukkamallin soveltuvuuden kohdeorganisaation toimintojen mallinnukseen. Toimintopohjaisesta ennustemallista on saatavissa lisäarvoa budjetointiin ja skenaariotyöhön. Mallin avulla voidaan tarkastella budjetoinnin realistisuutta. Skenaariotyöstä voidaan saada tukea päätöksentekoon, koska erilaisten toimenpiteiden vaikutuksia voidaan arvioida resurssitarpeen ja kustannusten näkökulmasta.

Creating possibilities for collective creativity : Brokerage Functions in Practice-Based Innovation

In the network era, creative achievements like innovations are more and more often created in interaction among different actors. The complexity of today‘s problems transcends the individual human mind, requiring not only individual but also collective creativity. In collective creativity, it is impossible to trace the source of new ideas to an individual. Instead, creative activity emerges from the collaboration and contribution of many individuals, thereby blurring the contribution of specific individuals in creating ideas. Collective creativity is often associated with diversity of knowledge, skills, experiences and perspectives. Collaboration between diverse actors thus triggers creativity and gives possibilities for collective creativity. This dissertation investigates collective creativity in the context of practice-based innovation. Practice-based innovation processes are triggered by problem setting in a practical context and conducted in non-linear processes utilising scientific and practical knowledge production and creation in cross-disciplinary innovation networks. In these networks diversity or distances between innovation actors are essential. Innovation potential may be found in exploiting different kinds of distances. This dissertation presents different kinds of distances, such as cognitive, functional and organisational which could be considered as sources of creativity and thus innovation. However, formation and functioning of these kinds of innovation networks can be problematic. Distances between innovating actors may be so great that a special interpretation function is needed – that is, brokerage. This dissertation defines factors that enhance collective creativity in practice-based innovation and especially in the fuzzy front end phase of innovation processes. The first objective of this dissertation is to study individual and collective creativity at the employee level and identify those factors that support individual and collective creativity in the organisation. The second objective is to study how organisations use external knowledge to support collective creativity in their innovation processes in open multi-actor innovation. The third objective is to define how brokerage functions create possibilities for collective creativity especially in the context of practice-based innovation. The research objectives have been studied through five substudies using a case-study strategy. Each substudy highlights various aspects of creativity and collective creativity. The empirical data consist of materials from innovation projects arranged in the Lahti region, Finland, or materials from the development of innovation methods in the Lahti region. The Lahti region has been chosen as the research context because the innovation policy of the region emphasises especially the promotion of practice-based innovations. The results of this dissertation indicate that all possibilities of collective creativity are not utilised in internal operations of organisations. The dissertation introduces several factors that could support collective creativity in organisations. However, creativity as a social construct is understood and experienced differently in different organisations, and these differences should be taken into account when supporting creativity in organisations. The increasing complexity of most potential innovations requires collaborative creative efforts that often exceed the boundaries of the organisation and call for the involvement of external expertise. In practice-based innovation different distances are considered as sources of creativity. This dissertation gives practical implications on how it is possible to exploit different kinds of distances knowingly. It underlines especially the importance of brokerage functions in open, practice-based innovation in order to create possibilities for collective creativity. As a contribution of this dissertation, a model of brokerage functions in practice-based innovation is formulated. According to the model, the results and success of brokerage functions are based on the context of brokerage as well as the roles, tasks, skills and capabilities of brokers. The brokerage functions in practice-based innovation are also possible to divide into social and cognitive brokerage.

Strategic Change Management Readiness Evaluation in Organizations

The objective of this study and paper was to find out how the strategic change management readiness in organizations can be evaluated. Based on theory and prior CMP model, the framework of strategic change management and issues related to it was constructed. Additionally a synthesis of the most important phases and interventions in strategic change process and project was created. These phases were starting point, planning, implementation and evaluation and securing phases. Qualitative approach was utilized in the empirical part of the study due to the need for in-depth information about the topics surveyed through semi-structured interview. There were 18 responders from the top management of large Finnish companies. In this study interventions, strengths and weaknesses during the various phases of strategic change projects were revealed. Additionally the interviewees’ opinion on the importance of each of the interventions in strategic change project success was asked. According to this study, the most important phases recognized through researching theoretical literature, prior CMP model and empirical information in starting point phase were analysis of current and desired state and need for change accompanied with guiding coalition formulation. In planning phase the most important interventions were project organization formulation, action plan creation, analysis of prior and current strategic change projects and organizational structure analysis. In the change project implementation phase the interventions of importance were launch, quick wins, sense of urgency creation, change resistance management and change communications. In the final evaluation and securing phase project evaluation was the most important intervention. Based on the results a tool for creating change management readiness profile was created.

Generation and Characterization of Knockout Mice and Analysis of Patient Material Demonstrates a Role for Tissue Inhibitor of Metalloproteinases 4 (Timp4) in the Cardiovascular System and Tumor Metastasis

This thesis focuses on tissue inhibitor of metalloproteinases 4 (TIMP4) which is the newest member of a small gene and protein family of four closely related endogenous inhibitors of extracellular matrix (ECM) degrading enzymes. Existing data on TIMP4 suggested that it exhibits a more restricted expression pattern than the other TIMPs with high expression levels in heart, brain, ovary and skeletal muscle. These observations and the fact that the ECM is of special importance to provide the cardiovascular system with structural strength combined with elasticity and distensibility, prompted the present molecular biologic investigation on TIMP4. In the first part of the study the murine Timp4 gene was cloned and characterized in detail. The structure of murine Timp4 genomic locus resembles that in other species and of the other Timps. The highest Timp4 expression was detected in heart, ovary and brain. As the expression pattern of Timp4 gives only limited information about its role in physiology and pathology, Timp4 knockout mice were generated next. The analysis of Timp4 knockout mice revealed that Timp4 deficiency has no obvious effect on the development, growth or fertility of mice. Therefore, Timp4 deficient mice were challenged using available cardiovascular models, i.e. experimental cardiac pressure overload and myocardial infarction. In the former model, Timp4 deficiency was found to be compensated by Timp2 overexpression, whereas in the myocardial infarct model, Timp4 deficiency resulted in increased mortality due to increased susceptibility for cardiac rupture. In the wound healing model, Timp4 deficiency was shown to result in transient retardation of re-epithelialization of cutaneous wounds. Melanoma tumor growth was similar in Timp4 deficient and control mice. Despite of this, lung metastasis of melanoma cells was significantly increased in Timp4 null mice. In an attempt to translate the current findings to patient material, TIMP4 expression was studied in human specimens representing different inflammatory cardiovascular pathologies, i.e. giant cell arteritis, atherosclerotic coronary arteries and heart allografts exhibiting signs of chronic rejection. The results showed that cardiovascular expression of TIMP4 is elevated particularly in areas exhibiting inflammation. The results of the present studies suggest that TIMP4 has a special role in the regulation of tissue repair processes in the heart, and also in healing wounds and metastases. Furthermore, evidence is provided suggesting the usefulness of TIMP4 as a novel systemic marker for vascular inflammation.

Cultural Diversity, Social Cohesion, Religion: Core Values and Educational Policies in Four European Nations

In my doctoral thesis I evaluate strategies designed to cope with the multicultural nature of four European nations: Great Britain, The Netherlands, Sweden, and Denmark. I also analyse and clarify the question of the place of religion in present-day Europe. The empirical material analysed in the study consists of politicians’ statements and policy documents dealing with immigration policy and religious and values education in the four countries. In addition, I analyse statements issued by the Council of Europe regarding religious education, along with all cases relevant to religious education brought before the United Nations Human Rights Committee or the European Court of Human Rights. The theoretical framework is formed by the scholarly debate – among philosophers, sociologists and scholars of religion in education – concerning the question of a just society. Special emphasis is given to philosophical theories that are in favour of granting special group rights to religious minorities in the name of equal treatment. With regard to the question of the appropriate place of religion, I apply Kim Knott’s methodological model for locating religion in secular contexts, and Émile Durkheim’s theory as to the significance of religion and collective sentiments in uniting adherents or members of a group into a single moral community. The study shows that even when the positive side of immigration, as a potential force for the enrichment of the public culture, is acknowledged, there is anxiety as to the successful integration of immigrants. The premises and goals of immigration policies have also been questioned. One central problem is the incommensurability between the values upheld by Western liberal democracies and certain religious traditions, above all those of Islam. Great Britain, The Netherlands, Sweden, and Denmark have tightened control over their citizens’ ethical attitudes and want to regulate these as well. In coping with cultural diversity, the significance of education, especially religious education, plays a significant role; as future citizens, pupils are expected to internalise the society’s core values as well as gaining an understanding of different cultures and ways of life. It is also worth noting that both the Council of Europe and the European Court of Human Rights have recently expressed the view that one important goal of religious education is to enable pupils to be critical and autonomous with regard to different religions and moral positions. The study shows that religion is not seen as purely a personal matter. Religion is closely linked to individual and national identity, and religious traditions thus have a place in the public domain. It should be noted, however, that a religious tradition – more precisely, an interpretation of religious tradition – qualifies as a legitimate partner in the democratic decision-making process only if it shares similar values with Western European nations.

Utilization of Particle Image velocimetry in PPOOLEX condensation experiments

Particle Image Velocimetry, PIV, is an optical measuring technique to obtain velocity information of a flow in interest. With PIV it is possible to achieve two or three dimensional velocity vector fields from a measurement area instead of a single point in a flow. Measured flow can be either in liquid or in gas form. PIV is nowadays widely applied to flow field studies. The need for PIV is to obtain validation data for Computational Fluid Dynamics calculation programs that has been used to model blow down experiments in PPOOLEX test facility in the Lappeenranta University of Technology. In this thesis PIV and its theoretical background are presented. All the subsystems that can be considered to be part of a PIV system are presented as well with detail. Emphasis is also put to the mathematics behind the image evaluation. The work also included selection and successful testing of a PIV system, as well as the planning of the installation to the PPOOLEX facility. Already in the preliminary testing PIV was found to be good addition to the measuring equipment for Nuclear Safety Research Unit of LUT. The installation to PPOOLEX facility was successful even though there were many restrictions considering it. All parts of the PIV system worked and they were found out to be appropriate for the planned use. Results and observations presented in this thesis are a good background to further PIV use.

Kunnossapitopalveluiden arvopohjaisen elinkaarimallin kehittäminen

Tutkimuksen päätavoitteena on luoda yleispätevä elinkaarimalli, jota voidaan hyö-dyntää laitetason kunnossapitoon liittyvissä päätöksentekotilanteissa eri teollisuu-denaloilla. Elinkaarimalliin yhdistettiin arvoajattelu, jonka pohjalta mallin käyttäjät voivat valita ja painottaa omien näkemyksiensä mukaan arvoa luovat elementit sekä nähdä muille verkostojäsenille arvoa lisäävät tekijät. Aiemmissa elinkaarimalleissa on keskitytty pääasiassa yhteen tarkastelunäkökulmaan, joten verkostotason työkalulle on selkeä tarve. Myöskään arvoajattelua ei ole aiemmin yhdistetty elinkaarilaskentaa soveltaviin malleihin. Työn osalta käytettiin konstruktiivista tutkimusotetta. Elinkaarimallia kehitettiin ja testattiin kaivosteollisuuden yritysverkostoon kuuluvien kahden case-tapauksen avulla. Tutkimuksen teoreettinen osa pohjautui työn oleellisempiin osa-alueisiin, kuten kunnossapitoon, arvoelementteihin ja elinkaarilaskentaan. Työn empiirisessä osiossa hyödynnettiin verkostoon kuuluvien yritysedustajien haastatteluita sekä yritysten tietojärjestelmästä saatuja tietoja. Arvoelementtien muodostuksessa käy-tettiin hyväksi myös muiden teollisuusyritysten ajatuksia ja näkökulmia. Työn merkittävin tulos on ensimmäisen version kehittäminen arvopohjaisesta elinkaarimallista. Elinkaarimalli antaa tuloksina jokaisen verkostojäsenen osalta laitteen kunnossapidon kustannukset ja tuotot vuositasolla sekä kumulatiivisesti koko elinkaaren ajalta niin reaali- kuin nykyarvonakin. Mallin tuloksena saadaan myös yhteistyön myötä kasvaneen lisäarvon suuruus ja jakautuminen verkoston toimijoiden välillä heidän valitsemiensa arvoelementtien mukaisesti. Näin ollen mallia voidaan käyttää tulevaisuuden ennustamisen lisäksi menneiden kustannusten ja tuottojen seurantamallina. Kokonaisuudessaan arvopohjaisen elinkaarimallin tuloksia voidaan hyödyntää laitetason kunnossapitoon liittyvissä sopimusneuvotte-luissa niin arvoa luovien elementtien kuin kustannus- ja tuottotekijöidenkin osalta. Kokonaisuudessaan arvoajattelun yhdistäminen ja hyödyntäminen elinkaarilas-kennassa on vielä alkuvaiheessa, joten kyseinen osa-alue onkin varsin järkevä jat-kotutkimuskohde. Avoimen ja tiiviin yritysyhteistyön kautta saadaan arvopohjai-sesta elinkaarimallista jatkokehitettyä erittäin hyödyllinen työkalu yritysverkosto-jen käytettäväksi. Kiristyvässä kilpailussa verkoston kokonaisarvon kasvu ja ja-kautuminen ovat tulevaisuudessa erittäin keskeisiä aihealueita, joten tämäntyylisten verkostotyökalujen hyödyntäminen nostanee ehdottomasti suosiotaan.

Situational awareness concept in a multinational collaboration environment : challenges in the information sharing framework

Technological capabilities are built to support different types of collaboration, and this gives the justification to widely observe, how activity environments are influenced by technology. Technology as an enabler can be addressed from different perspectives, other than merely technological. Dynamic, evolving environment is at the same time interesting but also challenging. As a multinational collaboration environment, the maritime surveillance is an good example of time critical and evolving environment, where technological solutions enable new ways of collaboration. Justification for the inspiration to use maritime environment as the baseline for understanding the challenges in creating and maintaining adequate level of situational awareness, derives from the complexity of the collaboration and information sharing environment elements, needed to be taken into account, when analyzing criticalities related to decision making. Situational awareness is an important element supporting decision making, and challenges related to it can also be observed in the maritime environment. This dissertation describes the structures and factors involved in this complex setting, found from the case studies that should be taken into account when trying to understand, how these elements affect the activities. This dissertation focuses on the gray area that is between a life threatening situation and normal everyday activities. From the multinational experimentation series case studies, MNE5 and MNE6 it was possible to observe situations that were not life threatening for the participants themselves, but not also basic every day activities. These case studies provided a unique possibility to see situations, where gaining of situational awareness and decision making are challenged with time critical crisis situations. Unfortunately organizations do not normally take the benefit from the everyday work to prepare themselves for possible emerging crisis situations. This dissertation focuses on creating a conceptual model and a concept that supports organizations – also outside the maritime community – to improve their ability to support gaining of situational awareness from the individual training level, all the way to changes in organizational structures in aiming for better support for decision making from the individual level to the highest decision making level. Quick changes and unpredictability are reality in organizations and organizations do not have the possibility to control all the factors that affect their functioning. Since we cannot be prepared for everything, and predict every crisis, individual activities inside teams and as a part of organizations, need to be supported with guidance, tools and training in order to support acting in challenging situations. In fact the ideology of the conceptual model created, lies especially in the aim of not controlling everything in beforehand, but supporting organizations with concrete procedures to help individuals to react in different, unpredictable situations, instead of focusing on traditional risk prevention and management. Technological capabilities are not automatically solutions for functional challenges; this is why it is justified to broaden the problem area observation from the technological perspective. This dissertation demonstrates that it is possible to support collaboration in a multinational environment with technological solutions, but it requires the recognition of technological limitations and accepting the possible restrictions related to technological innovations. Technology should not be considered value per se, the value of technology should be defined according to the support of activities, including strategic and operational environment evaluation, identification of organizational elements, and taking into account also the social factors and their challenges. Then we are one step closer to providing technological solutions that support the actual activities by taking into account the variables of the activity environment in question. The multidisciplinary view to approach the information sharing and collaboration framework, is derived especially from the complexity of decision making and building of situational awareness, since they are not build or created in vacuity, but in the organizational framework by the people doing it with the technological capabilities, enabled by the organizational structures. Introduced case studies were related to maritime environment, but according to the research results, it is valid to argue, that based on the lessons learned it is possible to create and further develop conceptual model and to create a general concept to support a wider range of organizations in their attempt to gain better level of situational awareness (SA) and to support decision making. To proof the versatile usage of the developed concept, I have introduced the case study findings to the health care environment and reflected the identified elements from the trauma center to the created concept. The main contribution to complete this adventure is the presented situational awareness concept created in the respect to NATO concept structure. This has been done to tackle the challenge of collaboration by focusing on situational awareness in the information sharing context by providing a theoretical ground and understanding, of how these issues should be approached, and how these elements can be generalized and used to support activities in other environments as well. This dissertation research has been a several year evolving process reflecting and affecting presented case studies and this learning experience from the case studies has also affected the goals and research questions of this dissertation. This venture has been written from a retro perspective according to ideology of process modeling and design rationale to present to the reader how this entire journey took place and what where the critical milestones that affected the end result, conceptual model. Support in a challenging information sharing framework can be provided with the right type of combination of tools, procedures and individual effort. This dissertation will provide insights to those with a new approach to war technology for the organizations to gain a better level of awareness and to improve the capabilities in decision making. This dissertation will present, from the war technology starting point, a new approach and possibility for the organizations to create a better level of awareness and support for decision making with the right combination of tools, procedures and individual effort.