Modelling of ultrasound assisted mixing in Newtonian and non-Newtonian liquids

The purpose of this work is to obtain a better understanding of behaviour of possible ultrasound appliance on fluid media mixing. The research is done in the regard to Newtonian and non-Newtonian fluids. The process of ultrasound appliance on liquids is modelled in COMSOL Multiphysics software. The influence of ultrasound using is introduced as waveform equation. Turbulence modelling is fulfilled by the k-ε model in Newtonian fluid. The modeling of ultrasound assisted mixing in non-Newtonian fluids is based on the power law. To verify modelling results two practical methods are used: Particle Image Velocimetry and measurements of mixing time. Particle Image Velocimetry allows capturing of velocity flow field continuously and presents detailed depiction of liquid dynamics. The second way of verification is the comparison of mixing time of homogeneity. Experimentally achievement of mixing time is done by conductivity measurements. In modelling part mixing time is achieved by special module of COMSOL Multiphysics – the transport of diluted species. Both practical and modelling parts show similar radial mechanism of fluid flow under ultrasound appliance – from the horn tip fluid moves to the bottom and along the walls goes back. Velocity profiles are similar in modelling and experimental part in the case of Newtonian fluid. In the case of non-Newtonian fluid velocity profiles do not agree. The development track of ultrasound-assisted mixing modelling is presented in the thesis.

Pulsed electric field assisted sol-gel preparation of TiO2 particles and their photocatalytic properties

The objective of this thesis was to study the effect of pulsed electric field on the preparation of TiO2 nanoparticles via sol-gel method. The literature part deals with properties of different TiO2 crystal forms, principles of photocatalysis, sol-gel method and pulsed electric field processing. It was expected that the pulsed electric field would have an influence on crystallite size, specific surface area, polymorphism and photocatalytic activity of produced particles. TiO2 samples were prepared by using different frequencies and treatment times of pulsed electric field. The properties of produced TiO2 particles were examined X-ray diffraction (XRD), Raman spectroscopy and BET surface area analysis. The photocatalytic activities of produced TiO2 particles were determined by using them as photocatalysts for the degradation of formic acid under UVA-light. The photocatalytic activities of samples produced with sol-gel method were also compared with the commercial TiO2 powder Aeroxide® (Evonic Degussa GmbH). Pulsed electric field did not have an effect on the morphology of particles. Results from XRD and Raman analysis showed that all produced TiO2 samples were pure anatase. However, pulsed electric field did have an effect on crystallite size, specific surface area and photocatalytic activity of TiO2 particles. Generally, the crystallite sizes were smaller, specific surface areas larger and initial formic acid degradation rates higher for samples that were produced by applying the pulsed electric field. The higher photocatalytic activities were attributed to larger surface areas and smaller crystallite sizes. Though, with all of the TiO2 samples produced by the sol-gel method the initial formic acid degradation rates were significantly slower than with the commercial TiO2 powder.

The Role of Video Based Content Marketing as a Part of Modern Marketing Communications

The thesis studies the role of video based content marketing as a part of modern marketing communications.

Nanoparticle-Assisted Immunoassays for Point-of-Care Testing - With Specific Interest in Minimally Interference-Prone Assays for Cardiac Troponin I

Cardiac troponins (cTn) I and T are the current golden standard biochemical markers in the diagnosis and risk stratification of patients with suspected acute coronary syndrome. During the past few years, novel assays capable of detecting cTn‐concentrations in >50% of apparently healthy individuals have become readily available. With the emerging of these high sensitivity cTn assays, reductions in the assay specificity have caused elevations in the measured cTn levels that do not correlate with the clinical picture of the patient. The increased assay sensitivity may reveal that various analytical interference mechanisms exist. This doctoral thesis focused on developing nanoparticle‐assisted immunometric assays that could possibly be applied to an automated point‐of‐care system. The main objective was to develop minimally interference‐prone assays for cTnI by employing recombinant antibody fragments. Fast 5‐ and 15‐minute assays for cTnI and D‐dimer, a degradation product of fibrin, based on intrinsically fluorescent nanoparticles were introduced, thus highlighting the versatility of nanoparticles as universally applicable labels. The utilization of antibody fragments in different versions of the developed cTnI‐assay enabled decreases in the used antibody amounts without sacrificing assay sensitivity. In addition, the utilization of recombinant antibody fragments was shown to significantly decrease the measured cTnI concentrations in an apparently healthy population, as well as in samples containing known amounts of potentially interfering factors: triglycerides, bilirubin, rheumatoid factors, or human anti‐mouse antibodies. When determining the specificity of four commercially available antibodies for cTnI, two out of the four cross‐reacted with skeletal troponin I, but caused crossreactivity issues in patient samples only when paired together. In conclusion, the results of this thesis emphasize the importance of careful antibody selection when developing cTnI assays. The results with different recombinant antibody fragments suggest that the utilization of antibody fragments should strongly be encouraged in the immunoassay field, especially with analytes such as cTnI that require highly sensitive assay approaches.

Semantic and fuzzy modelling for human behaviour recognition in smart spaces : a case study on ambient assisted living.

Human activity recognition in everyday environments is a critical, but challenging task in Ambient Intelligence applications to achieve proper Ambient Assisted Living, and key challenges still remain to be dealt with to realize robust methods. One of the major limitations of the Ambient Intelligence systems today is the lack of semantic models of those activities on the environment, so that the system can recognize the speci c activity being performed by the user(s) and act accordingly. In this context, this thesis addresses the general problem of knowledge representation in Smart Spaces. The main objective is to develop knowledge-based models, equipped with semantics to learn, infer and monitor human behaviours in Smart Spaces. Moreover, it is easy to recognize that some aspects of this problem have a high degree of uncertainty, and therefore, the developed models must be equipped with mechanisms to manage this type of information. A fuzzy ontology and a semantic hybrid system are presented to allow modelling and recognition of a set of complex real-life scenarios where vagueness and uncertainty are inherent to the human nature of the users that perform it. The handling of uncertain, incomplete and vague data (i.e., missing sensor readings and activity execution variations, since human behaviour is non-deterministic) is approached for the rst time through a fuzzy ontology validated on real-time settings within a hybrid data-driven and knowledgebased architecture. The semantics of activities, sub-activities and real-time object interaction are taken into consideration. The proposed framework consists of two main modules: the low-level sub-activity recognizer and the high-level activity recognizer. The rst module detects sub-activities (i.e., actions or basic activities) that take input data directly from a depth sensor (Kinect). The main contribution of this thesis tackles the second component of the hybrid system, which lays on top of the previous one, in a superior level of abstraction, and acquires the input data from the rst module's output, and executes ontological inference to provide users, activities and their in uence in the environment, with semantics. This component is thus knowledge-based, and a fuzzy ontology was designed to model the high-level activities. Since activity recognition requires context-awareness and the ability to discriminate among activities in di erent environments, the semantic framework allows for modelling common-sense knowledge in the form of a rule-based system that supports expressions close to natural language in the form of fuzzy linguistic labels. The framework advantages have been evaluated with a challenging and new public dataset, CAD-120, achieving an accuracy of 90.1% and 91.1% respectively for low and high-level activities. This entails an improvement over both, entirely data-driven approaches, and merely ontology-based approaches. As an added value, for the system to be su ciently simple and exible to be managed by non-expert users, and thus, facilitate the transfer of research to industry, a development framework composed by a programming toolbox, a hybrid crisp and fuzzy architecture, and graphical models to represent and con gure human behaviour in Smart Spaces, were developed in order to provide the framework with more usability in the nal application. As a result, human behaviour recognition can help assisting people with special needs such as in healthcare, independent elderly living, in remote rehabilitation monitoring, industrial process guideline control, and many other cases. This thesis shows use cases in these areas.

Fenomenologinen tutkimus video-EEG potilaiden kohtauskokemuksista

Tässä fenomenologisessa tutkimuksessa kuvaillaan Video-EEG –tutkimukseen (VEEG) tulevien potilaiden kokemuksia kohtauksistaan. Tutkimusasetelmana on käytetty fenomenologiseen psykologiaan kuuluvaa Giorgin menetelmää soveltaen sitä hoitotieteen tutkimukseen. Tutkimuksen tarkoituksena oli kuvailla neurologisten kohtausoireiden vuoksi VEEG-tutkimukseen tulleiden potilaiden kokemuksia kohtauksistaan ja tunnistaa sekä kuvailla kokemukseen liittyviä tekijöitä. Tutkimuksen tavoitteena oli lisäta terveydenhoitohenkilökunnan ymmärrystä neurologisia kohtausoireita saavien ihmisten ohjaustarpeista. Materiaali kerättiin kahdeksalta potilaalta avoimilla haastatteluilla ja analysoitiin Giorgin analyysimenetelmällä. Aineistoon yhdistettiin kliinisen neurofysiologin lausunto ja muodostettiin kokemuskertomukset. Aineistosta tunnistettiin fenomenologista reduktiota käyttäen keskeiset kohtauksiin ja sairauteen liittyvät kokemukset. Käsitteiden suhdetta toisiinsa ja merkitystä sopeutumiselle analysoitiin käyttäen apuna Uncertainty in illness -mallia. Keskeisten kokemusten pohjalta toteutettiin kirjallisuushaku, jonka tuloksia reflektoitiin tämän tutkimuksen tuloksiin. Aineistosta muodostui kolme erillistä kokemuskertomusta: kertomus konkreettisista tapahtumista, kokemus hallinnan menettämisestä ja kokemus sairauden kanssa elämisesta. Keskeisiksi kokemussisällöiksi tunnistettiin kokemus terveysongelman hallinnasta, kokemus hallinnan menettämisestä, kokemus ympäristön negatiivisesta suhtautumisesta ja huoli läheisistä. Aikaisempaa tutkimusta löytyi kokemuksista terveysongelman hallinnasta ja hallinnan menetyksestä sekä ympäristön suhtautumisesta.

Fenomenologinen tutkimus video-EEG potilaiden kohtauskokemuksista

Tässä fenomenologisessa tutkimuksessa kuvaillaan Video-EEG –tutkimukseen (VEEG) tulevien potilaiden kokemuksia kohtauksistaan. Tutkimusasetelmana on käytetty fenomenologiseen psykologiaan kuuluvaa Giorgin menetelmää soveltaen sitä hoitotieteen tutkimukseen. Tutkimuksen tarkoituksena oli kuvailla neurologisten kohtausoireiden vuoksi VEEGtutkimukseen tulleiden potilaiden kokemuksia kohtauksistaan ja tunnistaa sekä kuvailla kokemukseen liittyviä tekijöitä. Tutkimuksen tavoitteena oli lisätä terveydenhoitohenkilökunnan ymmärrystä neurologisia kohtausoireita saavien ihmisten ohjaustarpeista. Materiaali kerättiin kahdeksalta potilaalta avoimilla haastatteluilla ja analysoitiin Giorgin analyysimenetelmällä. Aineistoon yhdistettiin kliinisen neurofysiologin lausunto ja muodostettiin kokemuskertomukset. Aineistosta tunnistettiin fenomenologista reduktiota käyttäen keskeiset kohtauksiin ja sairauteen liittyvät kokemukset. Käsitteiden suhdetta toisiinsa ja merkitystä sopeutumiselle analysoitiin käyttäen apuna Uncertainty in illness -mallia. Keskeisten kokemusten pohjalta toteutettiin kirjallisuushaku, jonka tuloksia reflektoitiin tämän tutkimuksen tuloksiin. Aineistosta muodostui kolme erillistä kokemuskertomusta: kertomus konkreettisista tapahtumista, kokemus hallinnan menettämisestä ja kokemus sairauden kanssa elämisestä. Keskeisiksi kokemussisällöiksi tunnistettiin kokemus terveysongelman hallinnasta, kokemus hallinnan menettämisestä, kokemus ympäristön negatiivisesta suhtautumisesta ja huoli läheisistä. Aikaisempaa tutkimusta löytyi kokemuksista terveysongelman hallinnasta ja hallinnan menetyksestä sekä ympäristön suhtautumisesta.

Automatic recognition of fish from video sequences

The problem of automatic recognition of the fish from the video sequences is discussed in this Master’s Thesis. This is a very urgent issue for many organizations engaged in fish farming in Finland and Russia because the process of automation control and counting of individual species is turning point in the industry. The difficulties and the specific features of the problem have been identified in order to find a solution and propose some recommendations for the components of the automated fish recognition system. Methods such as background subtraction, Kalman filtering and Viola-Jones method were implemented during this work for detection, tracking and estimation of fish parameters. Both the results of the experiments and the choice of the appropriate methods strongly depend on the quality and the type of a video which is used as an input data. Practical experiments have demonstrated that not all methods can produce good results for real data, whereas on synthetic data they operate satisfactorily.

Photocatalysis Studies under Visible Light Irradiation with TiO2 Obtained by Pulsed Electric Field Assisted Sol-Gel Method

The objective of this thesis was to study the effect of pulsed electric field on the preparation of TiO2 nanoparticles via sol-gel method under the visible light irradiation. The literature part introduces properties of different TiO2 crystal forms and principle of photocatalysis. It was expected that pulsed electric field would have an influence on degradation for oxalic acid and formic acid. TiO2 samples were prepared by using three frequencies (50Hz, 294Hz, and 963Hz) and two treatment times (12 minutes and 24 minutes) of pulsed electric field. The photocatalytic activities of TiO2 samples produced with sol-gel method were also compared with the TiO2 particles made by previous study and with the commercial TiO2 powder Aeroxide® (Evonic Degussa GmbH) at the same condition. Results show that pulsed electric field does have an effect on degradation for oxalic acid and formic acid. Generally, higher photocatalytic activities for oxalic acid and formic acid were obtained with lower frequency and longer treatment time of pulsed electric field.

Digital Exhaustion in relation to Video Games – The Consumer Perspective

This thesis regards exhaustion of copyright’s distribution right in intangible transfers of video games. It analyses whether, under the current law of the European Union, the phenomenon of digital exhaustion, especially in relation to games exists. The thesis analyses the consumers’ position in the market for copyright protected goods. It uses video games market as an example of the wider phenomenon of the effect of latest technological developments on consumers. The research conducted for the thesis is mostly legal dogmatic, although also comparative analysis, law and economics and law and technology methods are utilised. The thesis evaluates the effects of the most recent case law of the European Court of Justice to analyse the current state of digital exhaustion. In the analysis of effects that the existence of digital exhaustion has, the thesis uses the consumers’ point of view. The thesis introduces the current state of technology in the field of video games from a legal perspective. Furthermore the thesis analyses the effects on consumers of a scenario that no digital exhaustion exists in the future. Such scenario under the recent European case law at the moment seems realistic. The conclusion of my research is most importantly that the consumer position in the market for digital goods has deteriorated and that the probable exclusion of the exhaustion for digital goods is another piece of evidence of this development. Most importantly however, the state of affairs where no certainty prevails on whether digital exhaustion exists, creates injustice from the consumers’ point of view. Accordingly, acts by EU legislators of the Court of Justice of the European Union are required to clarify the issue.

TEHOHOITAJIEN KIVUN ARVIOINNIN OSAAMINEN – Tehohoitopotilaille kehitetyn kivunarviointimittarin käytön oppiminen video-opetuksen avulla.

Tehohoitopotilaan kivun arvioiminen on usein haastavaa, johtuen potilaan kyvyttömyydestä kommunikoida. Kivun arvioinnin avuksi onkin tästä syystä kehitetty käyttäytymiseen perustuvia kipumittareita. Tehohoitajilla on keskeinen asema kivun arvioinnissa, mutta tutkimusten perusteella tehohoitajien kivun arvioinnin osaaminen on puutteellista niin tietojen kuin taitojen osalta ja heillä on ennakkoasenteita kivun arviointiin liittyen. Tehohoitajien kouluttaminen kivun arviointiin liittyen on tärkeä keino tehohoitopotilaan kivun arvioinnin edistämisessä. Koulutuksen tulee kuitenkin olla helposti saatavilla, ottaen huomioon hoitotodellisuuden siihen tuomat haasteet. Tutkimuksen tarkoituksena oli arvioida video-opetuksen vaikutusta tehohoitajien tietoihin ja taitoihin tehohoitopotilaalle kehitetyn Critical-Care Pain Observation Tool (CPOT)-kipumittarin käyttöön liittyen, sekä kuvailla tehohoitajien kokemuksia video-opetuksesta oppimismenetelmänä. Yhdeltä teho-osastolta 48 tehohoitajaa katsoi tutkimusta varten kehitetyn CPOT-opetusvideon, jonka jälkeen he arvioivat kahden potilaan kipua CPOT-kipumittarilla, tutkijan tehdessä samanaikaisesti rinnakkaisarvioinnit potilaista. Arviointien jälkeen tehohoitajat tekivät tietotestin ja täyttivät CPOT-arviointilomakkeen. Tehohoitajien CPOT-kipumittarin käyttötaitoja arvioitiin tarkastelemalla tehohoitajien ja tutkijan tekemien kivunarviointien yhdenmukaisuutta interrater reliabiliteettilaskelmin. Kaksikymmentä tehohoitajaa haastateltiin heidän kokemuksista oppimismenetelmään liittyen. Haastattelut analysoitiin deduktiivisella temaattisella analyysillä. Tehohoitajat oppivat CPOT-kipumittarin käytön periaatteet ja kokivat oppineensa mittarin käytön, mutta interrater reliabiliteetti suhteessa tutkijan tekemiin kivun arviointeihin oli keskinkertainen. Video-opetus koettiin positiivisena, vaikkakin vuorovaikutuksellisuutta kaivattiin. Tutkimus osoitti video-opetuksen olevan käyttökelpoinen oppimismenetelmä CPOT-kipumittarin käytön periaatteiden oppimiseen, mutta parempien käyttötaitojen saavuttaminen vaatii lisäharjoittelua. Koska tehohoitajien subjektiivinen arvio käyttötaidoista ei välttämättä vastaa todellisia käyttötaitoja, oleellista olisi varmistaa myös objektiivisesti mittarin käyttötaidot koulutuksen jälkeen. Jatkossa tulisi tutkia käytäntöön soveltuvia keinoja varmistaa mittarin käyttötaidot, sekä teho-osastojen oppimiskulttuuria ja tehohoitajien motivaatiota ja asenteita työhön liittyvään oppimiseen.