Delivery, Outcome, and Costs of Orthodontic Care in Finnish Health Centres

The goal of the study was to analyse orthodontic care in Finnish health centres with special reference to the delivery, outcome and costs of treatment. Public orthodontic care was studied by two questionnaires sent to the chief dental officers of all health centres (n = 276) and to all specialist orthodontists in Finland (n = 146). The large regional variation was mentioned by the orthodontists as the most important factor requiring improvement. Orthodontic practices and outcome were studied in eight Finnish municipal health centres representing early and late timing of treatment. A random sample of 16- and 18-year-olds (n = 1109) living in these municipalities was examined for acceptability of occlusion with the Occlusal Morphology and Function Index (OMFI). In acceptability of occlusion, only minor differences were found between the two timing groups. The percentage of subjects with acceptable morphology was higher among untreated than among treated adolescents. The costs of orthodontic care were estimated among the adolescents with a treatment history. The mean appliance costs were higher in the late, and the mean visit costs higher in the early timing group. The cost-effectiveness of orthodontic services differed among the health centres, but was almost equal in the two timing groups. National guidelines and delegation of orthodontic tasks were suggested as the tools for reducing the variation among the health centres. In the eight health centres, considerable variation was found in acceptability of occlusion and in cost-effectiveness of services. The cost-effectiveness was not directly connected with the timing of treatment.

Applying organizational core values in everyday delivery work - case Accenture

The purpose of this thesis is to study organizational core values and their application in practice. With the help of literature, the thesis discusses the implementation of core values and the benefits that companies can gain by doing it successfully. Also, ways in which companies can improve their values’ application to their everyday work are presented. The case company’s value implementation is evaluated through a survey research conducted on their employees. The true power of values lies in their application, and therefore, core values should be the basis for all organizational behavior, integrated into everything a company does. Applying values in practice is an ongoing process and companies should continuously work towards creating a more value-based organizational culture. If a company does this effectively, they will most likely become more successful with stakeholders as well as financially. Companies looking to turn their values into actions should start with a self-assessment. Employee surveys are effective in assessing the current level of value implementation, since employees have valuable, first-hand information regarding the situations and behaviors they face in their everyday work. After the self-assessment, things like management commitment, communication, training, and support are key success factors in value implementation.

The Possibilities and Dosimetric Limitations of MLC-Based Intensity-Modulated Radiotherapy Delivery and Optimization Techniques

The use of intensity-modulated radiotherapy (IMRT) has increased extensively in the modern radiotherapy (RT) treatments over the past two decades. Radiation dose distributions can be delivered with higher conformality with IMRT when compared to the conventional 3D-conformal radiotherapy (3D-CRT). Higher conformality and target coverage increases the probability of tumour control and decreases the normal tissue complications. The primary goal of this work is to improve and evaluate the accuracy, efficiency and delivery techniques of RT treatments by using IMRT. This study evaluated the dosimetric limitations and possibilities of IMRT in small (treatments of head-and-neck, prostate and lung cancer) and large volumes (primitive neuroectodermal tumours). The dose coverage of target volumes and the sparing of critical organs were increased with IMRT when compared to 3D-CRT. The developed split field IMRT technique was found to be safe and accurate method in craniospinal irradiations. By using IMRT in simultaneous integrated boosting of biologically defined target volumes of localized prostate cancer high doses were achievable with only small increase in the treatment complexity. Biological plan optimization increased the probability of uncomplicated control on average by 28% when compared to standard IMRT delivery. Unfortunately IMRT carries also some drawbacks. In IMRT the beam modulation is realized by splitting a large radiation field to small apertures. The smaller the beam apertures are the larger the rebuild-up and rebuild-down effects are at the tissue interfaces. The limitations to use IMRT with small apertures in the treatments of small lung tumours were investigated with dosimetric film measurements. The results confirmed that the peripheral doses of the small lung tumours were decreased as the effective field size was decreased. The studied calculation algorithms were not able to model the dose deficiency of the tumours accurately. The use of small sliding window apertures of 2 mm and 4 mm decreased the tumour peripheral dose by 6% when compared to 3D-CRT treatment plan. A direct aperture based optimization (DABO) technique was examined as a solution to decrease the treatment complexity. The DABO IMRT technique was able to achieve treatment plans equivalent with the conventional IMRT fluence based optimization techniques in the concave head-and-neck target volumes. With DABO the effective field sizes were increased and the number of MUs was reduced with a factor of two. The optimality of a treatment plan and the therapeutic ratio can be further enhanced by using dose painting based on regional radiosensitivities imaged with functional imaging methods.

Building object-oriented software with the D-Bus messaging system

Object-oriented programming is a widely adopted paradigm for desktop software development. This paradigm partitions software into separate entities, objects, which consist of data and related procedures used to modify and inspect it. The paradigm has evolved during the last few decades to emphasize decoupling between object implementations, via means such as explicit interface inheritance and event-based implicit invocation. Inter-process communication (IPC) technologies allow applications to interact with each other. This enables making software distributed across multiple processes, resulting in a modular architecture with benefits in resource sharing, robustness, code reuse and security. The support for object-oriented programming concepts varies between IPC systems. This thesis is focused on the D-Bus system, which has recently gained a lot of users, but is still scantily researched. D-Bus has support for asynchronous remote procedure calls with return values and a content-based publish/subscribe event delivery mechanism. In this thesis, several patterns for method invocation in D-Bus and similar systems are compared. The patterns that simulate synchronous local calls are shown to be dangerous. Later, we present a state-caching proxy construct, which avoids the complexity of properly asynchronous calls for object inspection. The proxy and certain supplementary constructs are presented conceptually as generic object-oriented design patterns. The e ect of these patterns on non-functional qualities of software, such as complexity, performance and power consumption, is reasoned about based on the properties of the D-Bus system. The use of the patterns reduces complexity, but maintains the other qualities at a good level. Finally, we present currently existing means of specifying D-Bus object interfaces for the purposes of code and documentation generation. The interface description language used by the Telepathy modular IM/VoIP framework is found to be an useful extension of the basic D-Bus introspection format.

Can tourism be sustainable? : service experiences from tourism destinations in Europe

The tourism industry is growing rapidly, and thus there is an urgent need to developing sustainable tourism. The research objective of the thesis is to explore and discuss the concept of sustainability within the tourism industry from a marketing point of view, focusing on the perspective of tourist producers’. The thesis consists of four studies, each of which contains different perspectives to support this overall objective. The first study deals with how a hotel can achieve economic sustainability by creating a high level of customer service delivery using a refined GAP-model. The second study examines how tourist producers at mass tourism destinations work with sustainable tourism as a strategic marketing tool in their tourism product development. The third study addresses economic sustainability at the macro level by estimating the tourism demand for Sweden and Norway in five different countries. In the fourth study, the concept of sustainable mass tourism is developed and analyzed from a conceptual standpoint. Study 1 and study 3 concentrate on economic sustainability from a micro and national perspective. The main contribution of Study 1 is the refined GAP-model, which can be seen as a theoretical contribution to the service marketing research. Study 3 shows that exchange rate trends strongly affect tourists’ choice of destination. Study 2 examines sustainable mass tourism as a strategic marketing tool at the destination level. The conclusions of Study 2 contribute to the findings of Study 4 and consider the tourist producers approach to sustainable tourism. One of the contributions of Study 4 is that the concept of sustainable tourism should be divided into three separate parts; economic sustainability, social sustainability and environmental sustainability.

Supplier Delivery Quality Evaluation in Maintenance Supporting Spare Part Business

The focus of this thesis is the issues related to the operational purchasing level supply chain process. Due to this limitation, the physical product quality issues do not belong to the primary concerns of this thesis, whereas the bilateral processes between the supplier and the purchasing organizations are of interest. Also, the issues related to the delivery timing are excluded from the study. Because the perspective is on the issues involved in the supply chain operations, the bilateral communication issues between supplier representative and purchaser are also considered.

Cesarean section - short term maternal complications related to the mode of delivery

Cesarean section (CS) is the most common major surgery performed on women worldwide. CS can save the life of the mother or the fetus, but is associated with the typical complications of any major surgery: hemorrhage, infection, venous thromboembolism and complications of anesthesia, sometimes leading to maternal death. Recently there have been several reports from well resourced countries on increased severe maternal morbidity and even mortality. Increased rates of CS, obesity and older mothers may explain this rise. The aim of this thesis is to study the rates and risk factors of short term maternal complications associated with CS. Also, we compared maternal morbidity by mode of delivery and over time. The complication rates were assessed in a prospective study involving 2496 CS performed in the 12 largest delivery units in Finland in 2005. The rates of severe complications were studied by mode of delivery in a register-based study comparing national cohorts in 1997 and 2002. The impact of several risk factors on severe maternal morbidity by mode of delivery was studied in a register-based study of all singleton deliveries in 2007-2011. In the prospective study, 27% of the women who underwent CS had one or more intraoperative or postoperative complications during their hospital stay, and 10% had a severe complication. In the register-based study the incidence of life-threatening maternal complications was 7.6 in 1000 deliveries. The incidence was lowest for vaginal delivery (VD), followed by instrumental VD and elective CS, and highest in emergency CS. An attempt of VD, including the risks associated with emergency CS, seems to be the safest mode of delivery, even for most high-risk women.

Elinkaarihankkeen rakennusliikeriskit

Tiivistelmä: Elinkaaren palvelumallit ovat suosittuja julkisten palveluiden hankintamuotoja Iso-Britanniassa. PPP–malli on yksi monista julkisten palvelujen kumppanuusmalleista, josta on tullut joissakin kunnissa yhä suositumpi hankintamalli myös Suomessa. Tämä on seurausta kuntien tiukasta taloustilanteesta, jossa PPP–hankkeen katsotaan mahdollistavan julkisen sektorin investoinnit joutumatta leikkaamaan muita pakollisia hankintoja. Kuitenkin koko elinkaaren kattavat palvelutarjonnan hankintamallit ovat vielä melko uusia malleja ja meillä on tarve löytää toimivia sopimusmalleja ja käytäntöjä, jotta hankkeista saadaan rakennusliikettä kiinnostavia liiketoimintamalleja. Ulkomailla elinkaarihankkeista on tehty monia tutkimuksia ja konsultit ovat kääntäneet niitä omiin tarkoituksiinsa sopiviksi. Kuitenkin Suomen lainsäädäntö on erilainen julkisten palveluiden tuottamisessa, erityisesti lakisääteisissä terveydenhuoltopalveluissa, vesi- ja jätevesihuollossa, vankeinhoidossa, ja niin edelleen. Tästä näkökulmasta ulkomailla tehdyt tutkimukset eivät sellaisenaan sovi Suomeen käytettäviksi. Esimerkiksi tutkimuksissa esitetään, että elinkaarihankkeet tuottavat pitkän aikavälin kassavirtaan, mutta tämä etu koskee vain rahoittaja ja kiinteistöpalvelu yrityksiä - ei rakennusyritystä. Tutkimuksissa mainitaan myös muista elinkaarihankkeiden mahdollisuuksista, jotka jäävät kuitenkin rakennusliikkeen näkökulmasta epäselviksi. Perinteisiin rakennuttamisen malleihin verrattuna elinkaarihankkeiden sopimusmenettelyt ovat monimutkaisempia sekä aikaa vievempiä ja sopijaosapuolten yhteistyö elinkaarihankkeissa on välttämätöntä. Käytännössä elinkaarihankkeiden riskienjako nähdään julkisen sektorin ja yksityisen sektorin välillä yksipuoliseksi. Jotta elinkaarimalli yleistyisi Suomessa, niin elinkaarisopimuksen riskienjaosta on tehtävä tasapuolinen ja käyttäjä pitää saada myös riskejä kantamaan. Tässä työssä keskitytään arvioimaan elinkaarimallien keskeisiä menestystekijöitä ja riskitekijöitä ja löytää mahdollisia tapoja tehdä hankintaprosessista helppoa ja sujuvaa. Samalla yritetään selvittää, miten elinkaarihankkeesta saadaan rakennusliikkeen kannalta menestyvää liiketoimintaa. Johtopäätökset perustuvat aikaisempiin tutkimuksiin ja empiiriseen tapaustutkimukseen. Työssä arvioidaan niitä seikkoja, jotka vaikuttavat yksityisen sektorin tarjouspäätökseen. Arvioinnissa erotetaan toisistaan kolme erillistä riskitekijää; tarjouksen tekemisen riskit, rakennushankkeen riskit ja elinkaaren aikaiset riskit. Työssä todetaan, että aikaisemmat tutkimukset ovat riittämättömiä rakennusliikkeen riskien arvioimiseen.

Building Dynamic Data Centers for Fast Delivery of New Data and Data Updates

Poster at Open Repositories 2014, Helsinki, Finland, June 9-13, 2014

Self-deposit, discovery, and delivery of scientific GIS datasets using GeoHydra

Presentation at Open Repositories 2014, Helsinki, Finland, June 9-13, 2014

Linking supplier delivery risk to outbound delivery service performance improvement

Customer satisfaction should be the main focus for all of the parts of the business. Usually supply chain behind the business is in a key role when this focus is pursued especially in repair service business. When focusing on the materials that are needed to make repairs to equipment under service contracts, the time aspect of quality is critical. Do late deliveries from supplier have an effect on the service performance of repairs when distribution center of a centralized purchasing unit is acting as a buffer between suppliers and repair service business? And if so, how should the improvement efforts be prioritized? These are the two main questions that this thesis focuses on. Correlation and linear regression was tested between service levels of supplier and distribution center. Percentage of on-time deliveries were compared to outbound delivery service level. It was found that there is statistically significant correlation between inbound and outbound operations success. The other main question of the thesis, improvement prioritization, was answered by creating material availability based supplier classification and additional to that, by developing the decision process for the analysis of most critical suppliers. This was built on a basis of previous supplier and material classification methods.

Business-Oriented IT Tool Development For Service Delivery Process

The target of this thesis is to evaluate a bid, project and resource management IT tool for service delivery process via proof-of-concept (POC) project to assess, if the tested software is an appropriate tool for the Case Company’s business requirements. Literature suggests that IT projects implementation is still a grey area in scientific research. Also, IT projects have a notably high rate of failure, one significant reason for this being insufficient planning. To tackle this risk, the Case Company decided to perform a POC project, which involved a hands-on testing period of the assessed system. End users from the business side feel that current, highly tailored project management tool is inflexible, difficult to use, and sets unnecessary limitations for the business. Semi-structured interviews and a survey form are used to collect information about current business practices and business requirements related to the IT tool. For the POC project, a project group involving members from each of the Case Company’s four business divisions was established to perform the hands-on testing. Based on data acquired during the interviews and the hands-on testing period, a target state was defined and a gap analysis was carried out by comparing the features provided by the current tool and the tested tool to the target state, which are, together with the current state description, the most important result of the thesis.

Value added KPI service delivery with quality function deployment: Multiple case study in asset & real estate management

The aim of this study is to investigate value added service concept for an asset and real estate management case company. The initial purpose was to recognize the most value adding key performance indicators (KPIs) information delivered for its customers, real estate investors with value added service. The multiple case study strategy included two focus group interviews with five case interviews in total. Additionally, quality function deployment (QFD) was used in order to form up the service process. The study starts with introduction and methodology explaining the demand for the thesis study. The subsequent chapter presents the theoretical background on real estate management KPIs in four main points of views and quality function deployment from the service development point of view. The chapter also defines research gap for the case study. According to the case study interviews, the most favored KPIs to deliver for the clients are income maturity of lease agreements and leasing activity. These KPIs and quality characteristics are translated into the QFD. In total, the service QFD explains the service planning, process control, and action plan phases.