On the Reversed Brayton Cycle with High Speed Machinery

This work was carried out in the laboratory of Fluid Dynamics, at Lappeenranta University of Technology during the years 1991-1996. The research was a part of larger high speed technology development research. First, there was the idea of making high speed machinery applications with the Brayton cycle. There was a clear need to deepen theknowledge of the cycle itself and to make a new approach in the field of the research. Also, the removal of water from the humid air seemed very interesting. The goal of this work was to study methods of designing high speed machinery to the reversed Brayton cycle, from theoretical principles to practical applications. The reversed Brayton cycle can be employed as an air dryer, a heat pump or a refrigerating machine. In this research the use of humid air as a working fluid has an environmental advantage, as well. A new calculation method for the Braytoncycle is developed. In this method especially the expansion process in the turbine is important because of the condensation of the water vapour in the humid air. This physical phenomena can have significant effects on the level of performance of the application. Also, the influence of calculating the process with actual, achievable process equipment efficiencies is essential for the development of the future machinery. The above theoretical calculations are confirmed with two different laboratory prototypes. The high speed machinery concept allows one to build an application with only one rotating shaft including all the major parts: the high speed motor, the compressor and the turbine wheel. The use of oil free bearings and high rotational speed outlines give several advantages compared to conventional machineries: light weight, compact structure, safe operation andhigher efficiency at a large operational region. There are always problems whentheory is applied to practice. The calibrations of pressure, temperature and humidity probes were made with care but still measurable errors were not negligible. Several different separators were examined and in all cases the content of the separated water was not exact. Due to the compact sizes and structures of the prototypes, the process measurement was slightly difficult. The experimental results agree well with the theoretical calculations. These experiments prove the operation of the process and lay a ground for the further development. The results of this work give very promising possibilities for the design of new, commercially competitive applications that use high speed machinery and the reversed Brayton cycle.

Design and implementation of FPGA-based LQ control of active magnetic bearings

The need for high performance, high precision, and energy saving in rotating machinery demands an alternative solution to traditional bearings. Because of the contactless operation principle, the rotating machines employing active magnetic bearings (AMBs) provide many advantages over the traditional ones. The advantages such as contamination-free operation, low maintenance costs, high rotational speeds, low parasitic losses, programmable stiffness and damping, and vibration insulation come at expense of high cost, and complex technical solution. All these properties make the use of AMBs appropriate primarily for specific and highly demanding applications. High performance and high precision control requires model-based control methods and accurate models of the flexible rotor. In turn, complex models lead to high-order controllers and feature considerable computational burden. Fortunately, in the last few years the advancements in signal processing devices provide new perspective on the real-time control of AMBs. The design and the real-time digital implementation of the high-order LQ controllers, which focus on fast execution times, are the subjects of this work. In particular, the control design and implementation in the field programmable gate array (FPGA) circuits are investigated. The optimal design is guided by the physical constraints of the system for selecting the optimal weighting matrices. The plant model is complemented by augmenting appropriate disturbance models. The compensation of the force-field nonlinearities is proposed for decreasing the uncertainty of the actuator. A disturbance-observer-based unbalance compensation for canceling the magnetic force vibrations or vibrations in the measured positions is presented. The theoretical studies are verified by the practical experiments utilizing a custom-built laboratory test rig. The test rig uses a prototyping control platform developed in the scope of this work. To sum up, the work makes a step in the direction of an embedded single-chip FPGA-based controller of AMBs.

Nelitietrukin ohjausjärjestelmän suunnittelu QFD-laatutyökalua hyväksikäyttäen

Tämä työ käsittelee tuotekehitysprojektia, jonka tarkoituksena on suunnitella uusi nelitietyöntömastotrukki asiakaslähtöisesti QFD-laatutyökalua hyväksi käyttäen. Työ esittelee QFD-laatutyökalun, sekä varsinkin sen nelivaiheisen ASI:n toimintamallin. Työ antaa myös perusvalmiudet ASI:n toimintamallin käyttöön tuotekehitysprojektissa. Työssä keskitytään tarkastelemaan uuden ohjausjärjestelmän mekaanista kehittelyä. Suunnittelutyössä käytetään hyväksi ASI:n (American Supplier Institute) nelivaiheista QFD-laatutyökalua, joka on autoteollisuuden toimintatapoihin perustuva QFD-tekniikka. QFD tulee sanoista Quality Funcktion Deployment ja vapaasti suomennettuna se merkitsee asiakaslähtöinen tuotesuunnittelu. Nelivaiheinen QFD-malli koostuu seuraavista matriiseista: 1. Tuotteen suunnittelu, 2. osien suunnittelu ja kehittäminen, 3. prosessin suunnittelu sekä 4. tuotannon suunnittelu. Matriisin tulokset muodostavat aina seuraavan matriisin lähtökohdat. Ensimmäisen matriisin lähtökohdat muodostuvat asiakastarvekuvauksesta, joka saadaan haastatteluista, tutkimuksista yms. Tuotekehitysprojektissa kehitetty TEM-monitietrukki, jossa rajattomasti ympäripyöriviä tukipyöriä ohjataan CAN-väylän kautta älykkäällä ohjauslogiikalla, on markkinoilla erittäin kilpailukykyinen sekä ominaisuuksiensa että hintansa puolesta. QFD yhdessä huolellisesti analysoidun asiakastarvekuvauksen kanssa selkeyttää ja priorisoi tuotteen spesifikaation määrittelyä sekä ohjaa tuotteen kehittelyä ja tuotannollistamista. Tuotekehitysprojekti pysyy aikataulussaan ja tuotannollistamisen kynnyksellä tehtävät muutokset vähenevät selkeän jäsentelyn ansiosta.

Monitelakalanterin ulosottotelan analysointi ja kehittäminen

Työn tarkoituksena on selvittää uusien ulosottotelaratkaisujen käyttömahdollisuutta sekä levitystelojen tarvetta on-line-monitelakalanterissa. Uusia ratkaisuja tutkitaan teoreettisesti. On-line-konseptissa ajonopeus on suuri. Tällöin paperirata liikkuu sileillä teloilla yleensä ilmafilmialueella. Ilmafilmi paperiradan ja telan välissä mahdollistaa radan ja telan nopeuden riippumattomuuden toisistaan. Ilmafilmikerros toimii liukulaakerin tavoin radan ja telan välissä. Ilmafilmin muodostumiseen vaikuttavat useat muuttujat. Ilmafilmiä, sileän telan pitoa sekä ilmanpainetta radan ja telan välissä mitattiin koeajossa Metso Paper Oy:n Järvenpään WEB3000-tutkimuslaitoksessa. Saatujen teoreettisten tulosten perusteella uudet ulosottotelaratkaisut ovat mahdollisia. Ulosottotelaa voidaan pyörittää tietyissä olosuhteissa paperirataa hitaammin tai ulosottotela voidaan korvata palkkityyppisellä radankääntölaitteella. Samoin levitystelojen poisto alimmista positioista on mahdollista.

ADVANCED NUMERICAL METHODS FOR SIMULATING MICROBUBBLE IN AN AERATED MIXING TANK

Fluid mixing in mechanically agitated tanks is one of the major unit operations in many industries. Bubbly flows have been of interest among researchers in physics, medicine, chemistry and technology over the centuries. The aim of this thesis is to use advanced numerical methods for simulating microbubble in an aerated mixing tank. Main components of the mixing tank are a cylindrical vessel, a rotating Rushton turbine and the air nozzle. The objective of Computational Fluid Dynamics (CFD) is to predict fluid flow, heat transfer, mass transfer and chemical reactions. The CFD simulations of a turbulent bubbly flow are carried out in a cylindrical mixing tank using large eddy simulation (LES) and volume of fluid (VOF) method. The Rushton turbine induced flow is modeled by using a sliding mesh method. Numerical results are used to describe the bubbly flows in highly complex liquid flow. Some of the experimental works related to turbulent bubbly flow in a mixing tank are briefly reported. Numerical simulations are needed to complete and interpret the results of the experimental work. Information given by numerical simulations has a major role in designing and scaling-up mixing tanks. The results of this work have been reported in the following scientific articles: ·Honkanen M., Koohestany A., Hatunen T., Saarenrinne P., Zamankhan P., Large eddy simulations and PIV experiments of a two-phase air-water mixer, in Proceedings of ASME Fluids Engineering Summer Conference (2005). ·Honkanen M., Koohestany A., Hatunen T., Saarenrinne P., Zamankhan P., Dynamical States of Bubbling in an Aerated Stirring Tank, submitted to J. Computational Physics.

Sähköisen lineaariservomoottorijärjestelmän dynamiikan simulointi

Työssä johdettiin sähköisen lineaariservomoottorijärjestelmän dynaaminen malli. Lineaarimoottori on keksintönä vanha, mutta vasta viimeaikoina kestomagneettimateriaalien kehittyessä ja halvetessa lineaarimoottorista on tullut varteenotettava vaihtoehto pyörivän moottorin ja lineaarisen liikkeen toteuttavan mekanismin yhdistelmälle. Kestomagnetoituja lineaarimoottoreita käytetään sovelluksissa, joissa tarvitaan tarkkaa paikoitusta ja nopeudella ja kiihtyvyydellä on suuret vaatimukset. Moottorimalli toteutettiin vuorovaikutteisena simulointimallina. Moottorimalli, josta saatiin moottorin voima, rakennettiin MatLabâ 6.0/Simulinkâ –ohjelmalle ja moottoriin kiinnitetyn mekaniikan malli ADAMS 10.0 –ohjelmalle. Mallit on liitetty tämän jälkeen vuorovaikutteiseksi simulointimalliksi. Simuloinnista saatuja tuloksia on verrattu koneautomaation laboratorioon hankitun lineaarimoottorijärjestelmän mitattuihin vasteisiin.

Tukin asemointi sahausta varten

Diplomityössä tutkittiin tukinpyörityksen yleisimpiä ongelmia. Tutkimus selvitti tukinpyörityksen ongelmien syitä, sekä määritti kahden tukinpyörityslaitteiston takuuarvot. Tutkimuksen kohteena oli myös prosessiparametrien muutoksen vaikutus pyöritystarkkuuteen. Tukin pyöritysvirheen ja saannon yhteyttä tutkittiin teorian perusteella. Tukin onnistuneessa asemoinnissa sahaukseen täytyy hallita tukinpyöritys sekä -suuntaus. Tukin virheellinen asemointi heikentää saantoa. Raaka-ainekustannukset ovat suurimmat yksittäiset kustannukset sahoilla, siksi tukin virheellinen asemointi heikentää sahan taloudellista tulosta voimakkaasti. Työn tuloksista käy ilmi, ettei tukinpyörityksen onnistuminen riipu ainoastaan mekaanisista ratkaisuista, järjestelmän kaikkien komponenttien on toimittava moitteettomasti. Mekaniikka ei toteuta pyörityskäskyjä oikein, jos käskyt ovat epätarkkoja. Tukinpyörityksen tarkkuuden mittaukseen on kiinnitetty huomiota vasta äskettäin. Tunnusluvut, jotka kuvaavat tukinpyöritystarkkuutta ovat vakiintumassa yleiseen käyttöön. Työn tulosten perusteella voidaan tukinpyörityslaitteistojen myynti perustaa tutkimustiedolle.

Populaation monimuotoisuuden mittaaminen liukulukukoodatuissa evoluutioalgoritmeissa

Diplomityössä esitetään menetelmä populaation monimuotoisuuden mittaamiseen liukulukukoodatuissa evoluutioalgoritmeissa, ja tarkastellaan kokeellisesti sen toimintaa. Evoluutioalgoritmit ovat populaatiopohjaisia menetelmiä, joilla pyritään ratkaisemaan optimointiongelmia. Evoluutioalgoritmeissa populaation monimuotoisuuden hallinta on välttämätöntä, jotta suoritettu haku olisi riittävän luotettavaa ja toisaalta riittävän nopeaa. Monimuotoisuuden mittaaminen on erityisen tarpeellista tutkittaessa evoluutioalgoritmien dynaamista käyttäytymistä. Työssä tarkastellaan haku- ja tavoitefunktioavaruuden monimuotoisuuden mittaamista. Toistaiseksi ei ole ollut olemassa täysin tyydyttäviä monimuotoisuuden mittareita, ja työn tavoitteena on kehittää yleiskäyttöinen menetelmä liukulukukoodattujen evoluutioalgoritmien suhteellisen ja absoluuttisen monimuotoisuuden mittaamiseen hakuavaruudessa. Kehitettyjen mittareiden toimintaa ja käyttökelpoisuutta tarkastellaan kokeellisesti ratkaisemalla optimointiongelmia differentiaalievoluutioalgoritmilla. Toteutettujen mittareiden toiminta perustuu keskihajontojen laskemiseen populaatiosta. Keskihajonnoille suoritetaan skaalaus, joko alkupopulaation tai nykyisen populaation suhteen, riippuen lasketaanko absoluuttista vai suhteellista monimuotoisuutta. Kokeellisessa tarkastelussa havaittiin kehitetyt mittarit toimiviksi ja käyttökelpoisiksi. Tavoitefunktion venyttäminen koordinaattiakseleiden suunnassa ei vaikuta mittarin toimintaan. Myöskään tavoitefunktion kiertäminen koordinaatistossa ei vaikuta mittareiden tuloksiin. Esitetyn menetelmän aikakompleksisuus riippuu lineaarisesti populaation koosta, ja mittarin toiminta on siten nopeaa suuriakin populaatioita käytettäessä. Suhteellinen monimuotoisuus antaa vertailukelpoisia tuloksia riippumatta parametrien lukumäärästä tai populaation koosta.

Brown algal phlorotannins: Improving and applying chemical methods

Phlorotannins are the least studied group of tannins and are found only in brown algae. Hitherto the roles of phlorotannins, e.g. in plant-herbivore interactions, have been studied by quantifying the total contents of the soluble phlorotannins with a variety of methods. Little attention has been given to either quantitative variation in cell-wall-bound and exuded phlorotannins or to qualitative variation in individual compounds. A quantification procedure was developed to measure the amount of cell-wall-bound phlorotannins. The quantification of soluble phlorotannins was adjusted for both large- and small-scale samples and used to estimate the amounts of exuded phlorotannins using bladder wrack (Fucus vesiculosus) as a model species. In addition, separation of individual soluble phlorotannins to produce a phlorotannin profile from the phenolic crude extract was achieved by high-performance liquid chromatography (HPLC). Along with these methodological studies, attention was focused on the factors in the procedure which generated variation in the yield of phlorotannins. The objective was to enhance the efficiency of the sample preparation procedure. To resolve the problem of rapid oxidation of phlorotannins in HPLC analyses, ascorbic acid was added to the extractant. The widely used colourimetric method was found to produce a variation in the yield that was dependent upon the pH and concentration of the sample. Using these developed, adjusted and modified methods, the phenotypic plasticity of phlorotannins was studied with respect to nutrient availability and herbivory. An increase in nutrients decreased the total amount of soluble phlorotannins but did not affect the cell-wall-bound phlorotannins, the exudation of phlorotannins or the phlorotannin profile achieved with HPLC. The presence of the snail Thedoxus fluviatilis on the thallus induced production of soluble phlorotannins, and grazing by the herbivorous isopod Idotea baltica increased the exudation of phlorotannins. To study whether the among-population variations in phlorotannin contents arise from the genetic divergence or from the plastic response of algae, or both, algae from separate populations were reared in a common garden. Genetic variation among local populations was found in both the phlorotannin profile and the content of total phlorotannins. Phlorotannins were also genetically variable within populations. This suggests that local algal populations have diverged in their contents of phlorotannins, and that they may respond to natural selection and evolve both quantitatively and qualitatively.

Cardan Gear Mechanism versus Slider-Crank Mechanism in Pumps and Engines

In machine design we always want to save space, save energy and produce as much power as possible. We can often reduce accelerations, inertial loads and energy consumption by changing construction. In this study the old cardan gear mechanism (hypocycloid mechanism) has been compared with the conventional slider-crank mechanism in air pumps and four-stroke engines. Comprehensive Newtonian dynamics has been derived for the both mechanisms. First the slidercrank and the cardan gear machines have been studied as lossless systems. Then the friction losses have been added to the calculations. The calculation results show that the cardan gear machines can be more efficient than the slider-crank machines. The smooth running, low mass inertia, high pressures and small frictional power losses make the cardan gear machines clearly better than the slider-crank machines. The dynamic tooth loads of the original cardan gear construction do not rise very high when the tooth clearances are kept tight. On the other hand the half-size crank length causes high bearing forces in the cardan gear machines. The friction losses of the cardan gear machines are generally quite small. The mechanical efficiencies are much higher in the cardan gear machines than in the slider-crank machines in normal use. Crankshaft torques and power needs are smaller in the cardan gear air pumps than in the equal slider-crank air pumps. The mean crankshaft torque and the mean output power are higher in the cardan gear four-stroke engines than in the slider-crank four-stroke engines in normal use. The cardan gear mechanism is at its best, when we want to build a pump or an engine with a long connecting rod (≈ 5⋅crank length) and a thin piston (≈ 1.5⋅crank length) rotating at high angular velocity and intermittently high angular acceleration. The cardan gear machines can be designed also as slide constructions without gears. Suitable applications of the cardan gear machines are three-cylinder half-radial engines for motorcycles, sixcylinder radial engines for airplanes and six-cylinder double half-radial engines for sport cars. The applied equations of Newtonian dynamics, comparative calculations, calculation results (tables, curves and surface plots) and recommendations presented in this study hold novelty value and are unpublished before. They have been made and written by the author first time in this study.

Nutrient enrichment and water depth modify consumer control in rocky shore macroalgal communities

The objective of my thesis is to assess mechanisms of ecological community control in macroalgal communities in the Baltic Sea. In the top-down model, predatory fish feed on invertebrate mesograzers, releasing algae partly from grazing pressure. Such a reciprocal relationship is called trophic cascade. In the bottom-up model, nutrients increase biomass in the food chain. The nutrients are first assimilated by algae and, via food chain, increase also abundance of grazers and predators. Previous studies on oceanic shores have described these two regulative mechanisms in the grazer - alga link, but how they interact in the trophic cascades from fish to algae is still inadequately known. Because the top-down and bottom-up mechanisms are predicted to depend on environmental disturbances, such as wave stress and light, I have studied these models at two distinct water depths. There are five factorial field experiments behind the thesis, which were all conducted in the Finnish Archipelago Sea. In all the experiments, I studied macroalgal colonization - either density, filament length or biomass - on submerged colonization substrates. By excluding predatory fish and mesograzers from the algal communities, the studies compared the strength of the top-down control to natural algal communities. A part of the experimental units were, in addition, exposed to enriched nitrogen and phosphorus concentrations, which enabled testing of bottom-up control. These two models of community control were further investigated in shallow (<1 m) and deep (ca. 3 m) water. Moreover, the control mechanisms were also expected to depend on grazer species. Therefore different grazer species were enclosed into experimental units and their impacts on macroalgal communities were followed specifically. The community control in the Baltic rocky shores was found to follow theoretical predictions, which have not been confirmed by field studies before. Predatory fish limited grazing impact, which was seen as denser algal communities and longer algal filaments. Nutrient enrichment increased density and filament length of annual algae and, thus, changed the species composition of the algal community. The perennial alga Fucus vesiculosusA and the red alga Ceramium tenuicorne suffered from the increased nutrient availabilities. The enriched nutrient conditions led to denser grazer fauna, thereby causing strong top-down control over both the annual and perennial macroalgae. The strength of the top-down control seemed to depend on the density and diversity of grazers and predators as well as on the species composition of macroalgal assemblages. The nutrient enrichment led to, however, weaker limiting impact of predatory fish on grazer fauna, because fish stocks did not respond as quickly to enhanced resources in the environment as the invertebrate fauna. According to environmental stress model, environmental disturbances weaken the top-down control. For example, on a wave-exposed shore, wave stress causes more stress to animals close to the surface than deeper on the shore. Mesograzers were efficient consumers at both the depths, while predation by fish was weaker in shallow water. Thus, the results supported the environmental stress model, which predicts that environmental disturbance affects stronger the higher a species is in the food chain. This thesis assessed the mechanisms of community control in three-level food chains and did not take into account higher predators. Such predators in the Baltic Sea are, for example, cormorant, seals, white-tailed sea eagle, cod and salmon. All these predatory species were recently or are currently under intensive fishing, hunting and persecution, and their stocks have only recently increased in the region. Therefore, it is possible that future densities of top predators may yet alter the strengths of the controlling mechanisms in the Baltic littoral zone.

Designing a new type of support for rotary kilns

Lime kiln is used as a part of the modern kraft pulp process in order to produce burnt lime from lime mud. This rotating kiln is supported by support rollers, which are traditionally supported by journal bearings. Since the continuous growth in the production of pulp mills requires larger lime kilns, the traditional bearing construction has become unreliable. The main problem especially involves the running-in phase of the bearings. In the present thesis, a new type of support roller was developed by using the systematic approach of machine design. Structural analysis was conducted on the critical parts of the selected structure by the finite element method. The operation of hydrodynamic bearings was examined by analytical methods. As a result of this work, a new type of support for rotating kilns was designed, which is more reliable and easier to service. A new support roller geometry is described, which pro¬vides for significant cost savings.

Non-Linear Journal Bearing Model for Analysis of Superharmonic Vibrations of Rotor Systems

A rotating machine usually consists of a rotor and bearings that supports it. The nonidealities in these components may excite vibration of the rotating system. The uncontrolled vibrations may lead to excessive wearing of the components of the rotating machine or reduce the process quality. Vibrations may be harmful even when amplitudes are seemingly low, as is usually the case in superharmonic vibration that takes place below the first critical speed of the rotating machine. Superharmonic vibration is excited when the rotational velocity of the machine is a fraction of the natural frequency of the system. In such a situation, a part of the machine’s rotational energy is transformed into vibration energy. The amount of vibration energy should be minimised in the design of rotating machines. The superharmonic vibration phenomena can be studied by analysing the coupled rotor-bearing system employing a multibody simulation approach. This research is focused on the modelling of hydrodynamic journal bearings and rotorbearing systems supported by journal bearings. In particular, the non-idealities affecting the rotor-bearing system and their effect on the superharmonic vibration of the rotating system are analysed. A comparison of computationally efficient journal bearing models is carried out in order to validate one model for further development. The selected bearing model is improved in order to take the waviness of the shaft journal into account. The improved model is implemented and analyzed in a multibody simulation code. A rotor-bearing system that consists of a flexible tube roll, two journal bearings and a supporting structure is analysed employing the multibody simulation technique. The modelled non-idealities are the shell thickness variation in the tube roll and the waviness of the shaft journal in the bearing assembly. Both modelled non-idealities may cause subharmonic resonance in the system. In multibody simulation, the coupled effect of the non-idealities can be captured in the analysis. Additionally one non-ideality is presented that does not excite the vibrations itself but affects the response of the rotorbearing system, namely the waviness of the bearing bushing which is the non-rotating part of the bearing system. The modelled system is verified with measurements performed on a test rig. In the measurements the waviness of bearing bushing was not measured and therefore it’s affect on the response was not verified. In conclusion, the selected modelling approach is an appropriate method when analysing the response of the rotor-bearing system. When comparing the simulated results to the measured ones, the overall agreement between the results is concluded to be good.

Literature review on permanent magnet generators design and dynamic behavior

This paper is a literature review which describes the construction of state of the art of permanent magnet generators and motors constructing and discusses the current and possible application of these machines in industry. Permanent magnet machines are a well-know class of rotating and linear electric machines used for many years in industrial applications. A particular interest for permanent magnet generators is connected with wind mills, which seem to be becoming increasingly popular nowadays. Geared and direct-driven permanent magnet generators are described. A classification of direct-driven permanent magnet generators is given. Design aspects of permanent magnet generators are presented. Permanent magnet generators for wind turbines designs are highlighted. Dynamics and vibration problems of permanent magnet generators covered in literature are presented. The application of the Finite Element Method for mechanical problems solution in the field of permanent magnet generators is discussed.

Langaton vääntömomentin mittausjärjestelmä

Diplomityössä suunnitellaan ja toteutetaan teollisuusympäristöön soveltuva langaton vääntömomentin mittausjärjestelmä. Langaton tiedonsiirto toteutetaan soveltaen Zigbee-radiotekniikkaan perustuvia XBee-moduuleja. Käyttökohteina sovellukselle ovat pyörivät akselit, joihin langallisen mittausjärjestelmän asentaminen on hankalaa tai mahdotonta. Työssä kuvataan järjestelmän toiminnallisuus, esitellään oleellisimmat järjestelmän rakenteeseen ja toimintaan liittyvät asiat, arvioidaan järjestelmän mittausepävarmuus sekä esitellään järjestelmällä saatuja mittaustuloksia. Lisäksi osaa mittaustuloksista verrataan referenssilaitteistolla saataviin tuloksiin.