Kartongin fysikaalisten ominaisuuksien vaikutus muovautuvuuteen

Työn tavoitteena oli kehittää menetelmä, jolla voitaisiin arvioida veto-ominaisuuksien avulla konvertointikoneen prässäysnopeuden ja muottien lämpötilan vaikutuksia kartongin muovautuvuuteen. Kirjallisuusosassa käsiteltiin kartongin muovautuvuuteen vaikuttavia ominaisuuksia sekä vetolujuuteen vaikuttavia tekijöitä. Lisäksi käsiteltiin kosteuden vaikutusta muovautuvuuteen sekä esiteltiin vuokakonvertointiprosessin periaate ja muovin sekä kartongin käyttäytymisen erot konvertointiprosessissa. Kokeellinen osa jakaantui kolmeen osaan. Esikokeissa tutkittiin laboratoriomittauksilla vetonopeuden ja kosteuden muutosten vaikutusta erilaisten kaupallisten kartonkimateriaalien vetolujuuteen ja murtovenymään. Tulosten perusteella valittiin prässäysnopeudet ja kosteustaso 2D- testauslaitteella suoritettuihin esi-pilot-mittakaavan kokeisiin sekä varsinaiseen pilot-koeajoon. Pilot-koeajossa pyrittiin arvioimaan prässäysnopeuden ja muottien lämpötilan vaikutuksia muovautuvuuteen vetolujuusarvojen avulla. Prässäysnopeudella ja vetolujuuslaitteen nopeudella ei havaittu yhteneväisyyksiä, jotta voitaisiin arvioida kartongin muovautuvuutta. Muovautuvuutta voidaan kuitenkin arvioida epäonnistuneisuusluvulla, jonka laskentapa kehitettiin työn aikana. Epäonnistuneisuusluku kuvaa hyvin kartongin muovautuvuutta ja on menetelmänä helppo, mutta sen heikkoutena on repeämien mittaamisen aiheuttama epätarkkuus. Esikokeissa havaittiin myös muovipäällysteiden veto-ominaisuuksien vastaavan kartongin ominaisuuksia 65 %:n suhteellisessa kosteudessa, jonka valittiin siten olevan optimaalinen olosuhde pilot-mittakaavan koeajoihin.

Improving the fire retardancy of extruded/coextruded wood-plastic composites

The main objective of this thesis is to study the impact of different mineral fillers and fire retardants on the reaction-to-fire properties of extruded/coextruded wood-plastic composites (WPCs). The impact of additives on the flammability properties of WPCs is studied by cone calorimetry. The studied properties are ignition time, peak heat release rate, total heat release, total smoke production, and mass loss rate. The effects of mineral fillers and fire retardants were found to vary with the type of additive, the type of additive combinations, the amount of additives, as well as the production method of the WPCs. The study shows that talc can be used to improve the properties of extruded WPCs. Especially ignition time, peak heat release rate and mass loss rate were found to be improved significantly by talc. The most significant improvement in the fire retardancy of coextruded WPCs was achieved in combinations of natural graphite and melamine. Ignition time, peak heat release rate and total smoke production were improved essentially. High increase in smoke production was found in samples where the amount of ammonium polyphosphate was 10% or higher. Coextrusion as a structural modification was found as a promising way to improve the flammability properties of composite materials in a cost-effective way.

Utilization of recycled mineral wool as filler in wood plastic composites

The impact of a recycled mineral wool filler on the various properties of wood plastic composites was studied and the critical factors affecting the formation of the properties were determined. An estimation of the volume of mineral wool fiber waste generated in the European Union between the years 2010-2020 was presented. Furthermore, the effect of fiber pre-treatment on the properties of the wood plastic composites were studied, and the environmental performance of a wood plastic composite containing recycled mineral fibers was assessed. The results showed that the volumes of construction and demolition waste and new mineral wool produced in the European Union are growing annually, and therefore also the volumes of recycled mineral wool waste generated are increasing. The study showed that the addition of recycled mineral wool into composites can enhance some of the mechanical properties and increase the moisture resistance properties of the composites notably. Recycled mineral wool as a filler in wood plastic composites can also improve the fire resistance properties of composites, but it does not protect the polymer matrix from pyrolysis. Fiber pre-treatment with silane solution improved some of the mechanical properties, but generally the use of maleated polypropylene as the coupling agent led to better mechanical and moisture resistance properties. The environmental performance of recycled mineral wool as the filler in wood plastic composites was superior compared to glass fibers. According to the findings, recycled mineral wool fibers can provide a technically and environmentally viable alternative to the traditional inorganic filler materials used in wood plastic composites.

Research progress in wood-plastic composites: A review

The interest towards wood-plastic composites (WPCs) is growing due to growing interest in materials with novel properties, which can replace more traditional materials, such as wood and plastic. The use of recycled materials in manufacture is also a bonus. However, the application ofWPCs has been limited because of their often poor mechanical and barrier properties, which can be improved by incorporation of the reinforcing fillers. Nanosized fillers, having a large surface area, can significantly increase interfacial interactions in the composite on molecular level, leading to materials with new properties. The review summarizes the development trends in the use on nanofillers for WPC design, which were reported in accessible literature during the last decade. The effect of the nanofillers on the mechanical properties, thermal stability, flammability and wettability ofWPC is discussed.