Creating an open-books implementation framework for a maintenance-related value-based life-cycle model

This study is a qualitative action research by its nature with elements of personal design in the form of a tangible model implementation framework construction. Utilized empirical data has been gathered via two questionnaires in relation to the arranged four workshop events with twelve individual participants. Five of them represented maintenance customers, three maintenance service providers and four equipment providers respectively. Further, there are two main research objectives in proportion to the two complementary focusing areas of this thesis. Firstly, the value-based life-cycle model, which first version has already been developed prior to this thesis, requires updating in order to increase its real-life applicability as an inter-firm decision-making tool in industrial maintenance. This first research objective is fulfilled by improving appearance, intelligibility and usability of the above-mentioned model. In addition, certain new features are also added. The workshop participants from the collaborating companies were reasonably pleased with made changes, although further attention will be required in future on the model’s intelligibility in particular as main results, charts and values were all reckoned as slightly hard to understand. Moreover, upgraded model’s appearance and added new features satisfied them the most. Secondly and more importantly, the premises of the model’s possible inter-firm implementation process need to be considered. This second research objective is delivered in two consecutive steps. At first, a bipartite open-books supported implementation framework is created and its different characteristics discussed in theory. Afterwards, the prerequisites and the pitfalls of increasing inter-organizational information transparency are studied in empirical context. One of the main findings was that the organizations are not yet prepared for network-wide information disclosure as dyadic collaboration was favored instead. However, they would be willing to share information bilaterally at least. Another major result was that the present state of companies’ cost accounting systems will definitely need implementation-wise enhancing in future since accurate and sufficiently detailed maintenance data is not available. Further, it will also be crucial to create supporting and mutually agreed network infrastructure. There are hardly any collaborative models, methods or tools currently in usage. Lastly, the essential questions about mutual trust and predominant purchasing strategies are cooperation-wise important. If inter-organizational activities are expanded, a more relational approach should be favored in this regard. Mutual trust was also recognized as a significant cooperation factor, but it is hard to measure in reality.

Itse tehty moderni. Gramofoni, polkupyörä ja valokuvaus suomalaisten elämässä 1880-luvulta 1940-luvulle

Tässä tutkimuksessa tarkastellaan aineellista modernia ja materiaalisen kulttuurin muutosta Suomessa 1880-luvulta 1940-luvulle tutkimalla sitä, miten kolme kansainvälistä teknologiaa, gramofoni, polkupyörä ja valokuvaus, otettiin Suomessa käyttöön ja millaisia paikallisia ilmiöitä niiden ympärille kehittyi. Tutkimus koostuu johdanto- ja yhteenveto-osan lisäksi kuudesta artikkelista, joissa käsitellään seuraavia alateemoja: itse tehtyjä polkupyöriä, käyntikorttikuvien käyttöä maalaiskodeissa, maaseudun pyöräilyä ja sen muistelemista, vuoden 1929 gramofonikuumetta, valokuvausta teknisenä harrastuksena sekä maalaisia gramofonin käytön tapoja. Tutkimuksen lähteinä on käytetty laajoja muistitietoaineistoja, sanoma- ja aikakauslehtiaineistoja, arkistoaineistoja, aikalaiskirjallisuutta ja museoesineitä. Lähteistä on etsitty mikrohistoriallista lukutapaa noudattaen johtolankoja gramofoniin, polkupyörään ja valokuvaukseen liittyneihin käytäntöihin. Esitän, että muistitietolähteet, muiden lähteiden kanssa ristiinluettuina, antavat hyvän mahdollisuuden sellaisten arjen käytäntöjen tarkasteluun, joiden tutkiminen muiden lähteiden perusteella olisi vaikeaa tai mahdotonta. Tutkimuksessa käytetyistä teoreettisista kehyksistä niin teknologian sosiaalinen rakentuminen, arjen historia, materiaaliseen kulttuuriin liittyvä teoriapohja, kulutuskulttuurin tutkimus kuin käytäntöteoriatkin kannustavat tarkastelemaan sitä, miten käyttäjien toiminta muokkaa ja määrittää teknologiaa. Näiden teoriasuuntausten pohjalta olen tätä tutkimusta varten kehittänyt itse tehdyn modernin ja kansankeksinnön käsitteet, jotka tarkentavat katseen ajallisesti ja paikallisesti tyypillisiin teknologian muokkauksen ja määrittelyn tapoihin sekä paikalliseen teknologiseen kekseliäisyyteen. Itse tehdyn modernin käsite auttaa hahmottamaan materiaalisia muutoksia ja pysyvyyksiä ajanjaksolla 1800-luvun lopulta toiseen maailmansotaan. Suomalaiset muovasivat omanlaisensa modernin, jossa uutuudet ja muutokset sulautuivat osaksi sitkeinä jatkuvia ja hitaasti muuttuvia maalaisyhteiskunnan toimintatapoja ja muokkasivat niitä vähitellen. Itse tehty moderni sekoitti omavaraisuutta ja kulutuskulttuuria, käsillä tekemiseen perustuvaa taitavuutta ja kursseilla sekä koulutuksessa saavutettua teknistä tietoa, paikallisia aineksia ja kansainvälisiä vaikutteita. Puhumalla kansanomaisista keksinnöistä olen halunnut korostaa tällaisten yhdistelmien mahdollisuutta ruohonjuuritasolla ja massatuotettujen laitteiden sovittamista osaksi pitkälti itse tehtyä ja omavaraista esinemaailmaa.

Printed platforms for paper-based analytical applications

Paper-based analytical technologies enable quantitative and rapid analysis of analytes from various application areas including healthcare, environmental monitoring and food safety. Because paper is a planar, flexible and light weight substrate, the devices can be transported and disposed easily. Diagnostic devices are especially valuable in resourcelimited environments where diagnosis as well as monitoring of therapy can be made even without electricity by using e.g. colorimetric assays. On the other hand, platforms including printed electrodes can be coupled with hand-held readers. They enable electrochemical detection with improved reliability, sensitivity and selectivity compared with colorimetric assays. In this thesis, different roll-to-roll compatible printing technologies were utilized for the fabrication of low-cost paper-based sensor platforms. The platforms intended for colorimetric assays and microfluidics were fabricated by patterning the paper substrates with hydrophobic vinyl substituted polydimethylsiloxane (PDMS) -based ink. Depending on the barrier properties of the substrate, the ink either penetrates into the paper structure creating e.g. microfluidic channel structures or remains on the surface creating a 2D analog of a microplate. The printed PDMS can be cured by a roll-ro-roll compatible infrared (IR) sintering method. The performance of these platforms was studied by printing glucose oxidase-based ink on the PDMS-free reaction areas. The subsequent application of the glucose analyte changed the colour of the white reaction area to purple with the colour density and intensity depending on the concentration of the glucose solution. Printed electrochemical cell platforms were fabricated on paper substrates with appropriate barrier properties by inkjet-printing metal nanoparticle based inks and by IR sintering them into conducting electrodes. Printed PDMS arrays were used for directing the liquid analyte onto the predetermined spots on the electrodes. Various electrochemical measurements were carried out both with the bare electrodes and electrodes functionalized with e.g. self assembled monolayers. Electrochemical glucose sensor was selected as a proof-of-concept device to demonstrate the potential of the printed electronic platforms.

Optimization and Measuring Techniques for Collect-and-Place Machines in Printed Circuit Board Industry

This thesis considers optimization problems arising in printed circuit board assembly. Especially, the case in which the electronic components of a single circuit board are placed using a single placement machine is studied. Although there is a large number of different placement machines, the use of collect-and-place -type gantry machines is discussed because of their flexibility and increasing popularity in the industry. Instead of solving the entire control optimization problem of a collect-andplace machine with a single application, the problem is divided into multiple subproblems because of its hard combinatorial nature. This dividing technique is called hierarchical decomposition. All the subproblems of the one PCB - one machine -context are described, classified and reviewed. The derived subproblems are then either solved with exact methods or new heuristic algorithms are developed and applied. The exact methods include, for example, a greedy algorithm and a solution based on dynamic programming. Some of the proposed heuristics contain constructive parts while others utilize local search or are based on frequency calculations. For the heuristics, it is made sure with comprehensive experimental tests that they are applicable and feasible. A number of quality functions will be proposed for evaluation and applied to the subproblems. In the experimental tests, artificially generated data from Markov-models and data from real-world PCB production are used. The thesis consists of an introduction and of five publications where the developed and used solution methods are described in their full detail. For all the problems stated in this thesis, the methods proposed are efficient enough to be used in the PCB assembly production in practice and are readily applicable in the PCB manufacturing industry.

Development and characterization of thin printed films for gas sensing applications

The monitoring and control of hydrogen sulfide (H2S) level is of great interest for a wide range of application areas including food quality control, defense and antiterrorist applications and air quality monitoring e.g. in mines. H2S is a very poisonous and flammable gas. Exposure to low concentrations of H2S can result in eye irritation, a sore throat and cough, shortness of breath, and fluid retention in the lungs. These symptoms usually disappear in a few weeks. Long-term, low-level exposure may result in fatigue, loss of appetite, headache, irritability, poor memory, and dizziness. Higher concentrations of 700 - 800 ppm tend to be fatal. H2S has a characteristic smell of rotten egg. However, because of temporary paralysis of olfactory nerves, the smelling capability at concentrations higher than 100 ppm is severely compromised. In addition, volatile H2S is one of the main products during the spoilage of poultry meat in anaerobic conditions. Currently, no commercial H2S sensor is available which can operate under anaerobic conditions and can be easily integrated in the food packaging. This thesis presents a step-wise progress in the development of printed H2S gas sensors. Efforts were made in the formulation, characterization and optimization of functional printable inks and coating pastes based on composites of a polymer and a metal salt as well as a composite of a metal salt and an organic acid. Different processing techniques including inkjet printing, flexographic printing, screen printing and spray coating were utilized in the fabrication of H2S sensors. The dispersions were characterized by measuring turbidity, surface tension, viscosity and particle size. The sensing films were characterized using X-ray photoelectron spectroscopy, X-ray diffraction, atomic force microscopy and an electrical multimeter. Thin and thick printed or coated films were developed for gas sensing applications with the aim of monitoring the H2S concentrations in real life applications. Initially, a H2S gas sensor based on a composite of polyaniline and metal salt was developed. Both aqueous and solvent-based dispersions were developed and characterized. These dispersions were then utilized in the fabrication of roll-to-roll printed H2S gas sensors. However, the humidity background, long term instability and comparatively lower detection limit made these sensors less favourable for real practical applications. To overcome these problems, copper acetate based sensors were developed for H2S gas sensing. Stable inks with excellent printability were developed by tuning the surface tension, viscosity and particle size. This enabled the formation of inkjet-printed high quality copper acetate films with excellent sensitivity towards H2S. Furthermore, these sensors showed negligible humidity effects and improved selectivity, response time, lower limit of detection and coefficient of variation. The lower limit of detection of copper acetate based sensors was further improved to sub-ppm level by incorporation of catalytic gold nano-particles and subsequent plasma treatment of the sensing film. These sensors were further integrated in an inexpensive wirelessly readable RLC-circuit (where R is resistor, L is inductor and C is capacitor). The performance of these sensors towards biogenic H2S produced during the spoilage of poultry meat in the modified atmosphere package was also demonstrated in this thesis. This serves as a proof of concept that these sensors can be utilized in real life applications.

Publication Statistics Books 2000-

Vapaakappalekartuntaan perustuva tilasto Suomessa kustannetusta kirjallisuudesta vuodesta 2000 lähtien

Open Access in Times of Knowledge Unlatched : Cooperative Action for Books and Journals

Presentation at the seminar "Publishers and Funders for OA in Finland", Helsinki, May 24, 2016