Mantle- and crust-derived magmatism in the southern Fennoscandian Shield at c. 1.8 Ga; evidence from geochemistry, isotopes and geochronology

Geokemi och isotopsammansättningarna hos ca 1,8 Ga (miljarder år) gamla mafiska bergartsintrusioner studerades i två huvudområden: i) Transskandinaviska magmatiska bältet (TMB) i Bergslagen, Småland och Blekinge, södra Sverige, inklusive några prov från det ca 1,87 Ga gamla Hedesunda-komplexet i östra Bergslagen, samt ii) mindre, postkollisionala komplex i södra Finland och ryska Karelen. I det senare fallet var även tillhörande granitoider inkluderade i studierna. TMB-bergarterna skiljer sig avsevärt i utvecklingsgrad och omfattar sammansättningsmässigt bergarter från ultramafiter till kvartsdioriter. Dessa bergarters geokemi är kännetecknande för kontinentala öbågar. För sydligaste TMB och Hedesunda antyder geokemin en något mera oceanisk öbågekaraktär. Tillsammans med tidigare data antyder de av Rutanen analyserade Nd- och Sr-isotopförhållanden för TMB en ’milt utarmad’ mantelsammansättning. De mafiska bergarterna i södra Finland och ryska Karelen varierar från ultramafiska till monzodioritiska, men med avsevärt högre alkalihalter jämfört med TMB. Källan för all den studerade mafiska magmatismen kan beskrivas som en utarmad mantel som i varierande grad påverkats av fluider och smältor ur subducerande litosfärplattor. Geokemin antyder infiltrering och påverkning av H2O-dominerande fluider i övre manteln för TMB. Den mafiska ca 1,8 Ga gamla magmatismen österut avspeglar en ökande påverkan av sedimentderiverade karbonatfluider och smältor inom allt djupare mantelområden. Denna subduktionsrelaterade mantelanrikning skedde under den föregående öbågeutvecklingen i södra delarna av Finland och Sverige, samt ryska Karelen. Geokemin för en grupp granitoider, associerade med de ca 1,8 Ga gamla intrusionerna i södra Finland visar både vulkanisk öbåge och synkollisional granitoidkaraktär. Denna grupp har ett blandat magmatiskt och sedimentärt Svekofenniskt ursprung, vilket kan antas p.g.a. deras Nd- och Sr-isotopförhållanden. En annan grupp av granitoider ligger geokemiskt mellan vulkanisk öbåge- och intraplatt-granitoider, och har magmatiskt ursprung. Geokemin och isotoperna hos dessa intrusioner kan förklaras med hybridisering mellan de kraftigt anrikade, mantelderiverade magmorna, och granitmagmor från den äldre skorpan. Den ca 1,8 Ga gamla TMB-magmatismen i Sverige skedde vid sammanslutning av kontinentalrandbågar, med kontinuerlig subduktion mot öster i Bergslagen, och mot norr i de sydligare delarna. Samtidigt i öster intruderade de postkollisionala intrusionerna i skorpan omedelbart efter kollisionen med den Volgo-Sarmatiska kontinenten från sydost. Denna invecklade paleotektoniska konfiguration orsakade en tektonisk regim där litosfäriska mantelkällor levererade de starkt anrikade magmorna, vilkas uppstigning troligen möjliggjordes av djupgående postkollisionala skjuvzoner. Intrusionerna orsakade uppsmältning av den omgivande skorpan, vilket framkallade den associerade granitoidmagmatismen.

Marketing of fire suppression systems: customer value and institutional aspects

The paper studied marketing of automatic fire suppression systems from the perspectives of customer value and institutions. The object of the study was research the special features of the sales and marketing of fire suppression systems, and find some practical applications for sales, and for lobbying of a new fire suppression technology. The theoretical background of the study was in the customer value literature and the theoretical concept of institutional entrepreneurship. The research was conducted as an electronic survey for three different groups of respondents; end customers, solution integrators, and re-sellers. From the answers was gathered generalisations about the customer value assessment and communication of the value related to the sales and marketing processes of the fire suppression systems. In addition, there was observed manners to receive information about the systems, and effects caused by institutions to the decision making of the different parties involved. The findings of the study support companies that are launching a new safety technology to the market focus their marketing, and help to understand institutional forces that are affecting to a safety related product.

Improving the fire retardancy of extruded/coextruded wood-plastic composites

The main objective of this thesis is to study the impact of different mineral fillers and fire retardants on the reaction-to-fire properties of extruded/coextruded wood-plastic composites (WPCs). The impact of additives on the flammability properties of WPCs is studied by cone calorimetry. The studied properties are ignition time, peak heat release rate, total heat release, total smoke production, and mass loss rate. The effects of mineral fillers and fire retardants were found to vary with the type of additive, the type of additive combinations, the amount of additives, as well as the production method of the WPCs. The study shows that talc can be used to improve the properties of extruded WPCs. Especially ignition time, peak heat release rate and mass loss rate were found to be improved significantly by talc. The most significant improvement in the fire retardancy of coextruded WPCs was achieved in combinations of natural graphite and melamine. Ignition time, peak heat release rate and total smoke production were improved essentially. High increase in smoke production was found in samples where the amount of ammonium polyphosphate was 10% or higher. Coextrusion as a structural modification was found as a promising way to improve the flammability properties of composite materials in a cost-effective way.

First-principles study on electronic and structural properties of Cu(In/Ga)Se alloys for solar cells

Thin-film photovoltaic solar cells based on the Cu(In1−xGax)Se2 (CIGS) alloys have attracted more and more attention due to their large optical absorption coefficient, long term stability, low cost, and high efficiency. Modern theoretical studies of this material with first-principles calculations can provide accurate description of the electronic structure and yield results in close agreement with experimental values, but takes a large amount of calculation time. In this work, we use first-principles calculations based on the computationally affordable meta- generalized gradient approximation of the density-functional theory to investigate electronic and structural properties of the CIGS alloys. We report on the simulation of the lattice parameters and band gaps, as a function of chemical composition. The obtained results were found to be in a good agreement with the available experimental data.

New methods for controlling twin configurations and characterizing twin boundaries in 5M Ni-Mn-Ga for the development of applications

Traditional methods for studying the magnetic shape memory (MSM) alloys Ni-Mn-Ga include subjecting the entire sample to a uniform magnetic field or completely actuating the sample mechanically. These methods have produced significant results in characterizing the MSM effect, the properties of Ni-Mn-Ga and have pioneered the development of applications from this material. Twin boundaries and their configuration within a Ni-Mn-Ga sample are a key component in the magnetic shape memory effect. Applications that are developed require an understanding of twin boundary characteristics and, more importantly, the ability to predictably control them. Twins have such a critical role that the twinning stress of a Ni-Mn-Ga crystal is the defining characteristic that indicates its quality and significant research has been conducted to minimize this property. This dissertation reports a decrease in the twinning stress, predictably controlling the twin configuration and characterizing the dynamics of twin boundaries. A reduction of the twinning stress is demonstrated by the discovery of Type II twins within Ni-Mn-Ga which have as little as 10% of the twinning stress of traditional Type I twins. Furthermore, new methods of actuating a Ni-Mn-Ga element using localized unidirectional or bidirectional magnetic fields were developed that can predictably control the twin configuration in a localized area of a Ni-Mn-Ga element. This method of controlling the local twin configuration was used in the characterization of twin boundary dynamics. Using a localized magnetic pulse, the velocity and acceleration of a single twin boundary were measured to be 82.5 m/s and 2.9 × 107 m/s2, and the time needed for the twin boundary to nucleate and begin moving was less than 2.8 μs. Using a bidirectional magnetic field from a diametrically magnetized cylindrical magnet, a highly reproducible and controllable local twin configuration was created in a Ni-Mn-Ga element which is the fundamental pumping mechanism in the MSM micropump that has been co-invented and extensively characterized by the author.

Marks of Fire, Value and Faith. Swords with Ferrous Inlays in Finland during the Late Iron Age (ca. 700–1200 AD)

This study explores swords with ferrous inlays found in Finland and dating from the late Iron Age, ca. 700–1200 AD. These swords reflect profound changes not only in styles and fashion but also in the technology of hilts and blades. This study explores how many of these kinds of swords are known from Finland, how they were made and where, what their status was in Late Iron Age Finland, and where the Finnish finds stand in accordance with other areas of Europe. The various methods included measuring of the finds and statistics. The main method of revealing the inlaid marks was radiography due to its non-destructive nature. In cases where inlays were visible without radiography, their details were inspected via microscopy. To study the materials and manufacture of inlaid swords, a sample of them was metallographically analysed to determine the forging technologies and nature of used materials. Furthermore, the manufacture was also studied with experimental approaches. As a result, a catalogue of 151 swords with ferrous inlays was created. This number is relatively high compared with other European countries, although systematic studies have been conducted in only some countries. The inlaid motifs were classified into five distinct categories to help the classification. To summarize, almost every documented inlaid sword was unique in some respect including measurements, inlaid motifs and materials of blades and inlays. Technological variation was also present, some blades being poorer and some of higher quality in spite of the inlaid motifs. Misspelt inscriptions as well as letter-like marks were common in Finland and also in Scandinavia. Furthermore, the provenance of iron and steel used in some blades hints at Scandinavian ores. The above observations, along with the experimental results indicating the existence of multiple alternative techniques of inlaying, suggest that these swords were manufactured locally in Scandinavia, most likely in imitation of Continental European models. Inlaid swords were valued partly for their assumed functionality in combat, as evidenced by damage on some examined blades, or they were valued for their inlays, which could have had fashionable or symbolical meanings bound to local beliefs.