On Commutation and Conjugacy of Rational Languages and the Fixed Point Method

The research on language equations has been active during last decades. Compared to the equations on words the equations on languages are much more difficult to solve. Even very simple equations that are easy to solve for words can be very hard for languages. In this thesis we study two of such equations, namely commutation and conjugacy equations. We study these equations on some limited special cases and compare some of these results to the solutions of corresponding equations on words. For both equations we study the maximal solutions, the centralizer and the conjugator. We present a fixed point method that we can use to search these maximal solutions and analyze the reasons why this method is not successful for all languages. We give also several examples to illustrate the behaviour of this method.

Small scale energy production in Helsinki Metropolitan area in emission trading point of view

Emission trading with greenhouse gases and green certificates are part if the climate policy the main target of which is reduce greenhouse gas emissions. The carbon dioxide and fine particle emissions of energy production in Helsinki Metropolitan area are calculated in this study. The analysis is made mainly by district heating point of view and the changes of the district heating network are assessed. Carbon dioxide emissions would be a bit higher, if the district heating network is expanded, but then the fine particle emissions would be much lower. Carbon dioxide emissions are roughly 10 % higher, if the district heating network is expanded at same rate as it has in past five years in the year 2030. The expansion of district heating network would decrease the fine particle emissions about 40 %. The cost of the expansion is allocated to be reduction cost of the fine particle emissions, which is considerably higher than the traditional reduction methods costs. The possible new nuclear plant would reduce the emissions considerably and the costs of the nuclear plant would be relatively low comparing the other energy production methods.

Kaupallisten lyhyen kantaman radiotekniikoiden kartoitus ja soveltuvuus analyysi metallisorvin ohjauksessa käytettävään point-to-point yhteyteen

Työssä tutkitaan kaupallisten lyhyen kantaman radiotekniikoiden ominaisuuksia sekä soveltuvuutta metallisorvin langattomaan ohjaukseen. Ominaisuuksien perusteella valitaan parhaiten sovellukseen käyvä radiotekniikka.

Kaupallisten lyhyen kantaman radiotekniikoiden kartoitus ja soveltuvuus analyysi metallisorvin ohjauksessa käytettävään point-to-point yhteyteen

Työssä vertaillaan kaupallisia lyhyen kantaman radiotekniikoita. Vertailujen pohjalta valitaan parhaiten sovelluskohteeseen soveltuva radiotekniikka.

Thermal modelling of semiconductor switches in three-level Neutral Point Clamped Medium Voltage DTC-inverter

The aim of this thesis is to investigate the thermal loading of medium voltage three-level NPC inverter’s semiconductor IGCT switches in different operation points. The objective is to reach both a fairly accurate off-line simulation program and also so simple a simulation model that its implementation into an embedded system could be reasonable in practice and a real time use should become feasible. Active loading limitation of the inverter can be realized with a thermal model which is practical in a real time use. Determining of the component heating has been divided into two parts; defining of component losses and establishing the structure of a thermal network. Basics of both parts are clarified. The simulation environment is Matlab-Simulink. Two different models are constructed – a more accurate one and a simplified one. Potential simplifications are clarified with the help of the first one. Simplifications are included in the latter model and the functionalities of both models are compared. When increasing the calculation time step a decreased number of considered components and time constants of the thermal network can be used in the simplified model. Heating of a switching component is dependent on its topological position and inverter’s operation point. The output frequency of the converter defines mainly which one of the switching components is – because of its losses and heating – the performance limiting component of the converter. Comparison of results given by different thermal models demonstrates that with larger time steps, describing of fast occurring switching losses becomes difficult. Generally articles and papers dealing with this subject are written for two-level inverters. Also inverters which apply direct torque control (DTC) are investigated rarely from the heating point of view. Hence, this thesis completes the former material.

Earnings Management Shareholders point of view

This paper studies the relationship of earnings management and investors. Analysis of incentives reveals that most of them are opportunistic in nature. Unfortunately the investor would need insider information to distinguish between different forms of earnings management. Investors in some countries seem to devalue earnings when government body has signaled that earnings management might be involved, unfortunately without a clear signal the behavior seems reverse among non-institutional investors.

Mobile system for pump working point estimation

In the current economy situation companies try to reduce their expenses. One of the solutions is to improve the energy efficiency of the processes. It is known that the energy consumption of pumping applications range from 20 up to 50% of the energy usage in the certain industrial plants operations. Some studies have shown that 30% to 50% of energy consumed by pump systems could be saved by changing the pump or the flow control method. The aim of this thesis is to create a mobile measurement system that can calculate a working point position of a pump drive. This information can be used to determine the efficiency of the pump drive operation and to develop a solution to bring pump’s efficiency to a maximum possible value. This can allow a great reduction in the pump drive’s life cycle cost. In the first part of the thesis, a brief introduction in the details of pump drive operation is given. Methods that can be used in the project are presented. Later, the review of available platforms for the project implementation is given. In the second part of the thesis, components of the project are presented. Detailed description for each created component is given. Finally, results of laboratory tests are presented. Acquired results are compared and analyzed. In addition, the operation of created system is analyzed and suggestions for the future development are given.

Supermatrix-hankkeen vahvuudet, heikkoudet, mahdollisuudet ja uhat

Supermatrix on Finnet-liitto ry:n jäsenyritysten hanke, joka tuo nopeiden valokuituyhteyksien avulla erilaisia sähköisiä palveluita kuluttajien koteihin ja yritysten toimipisteisiin. Näitä palveluita ovat mm. virtualisoidut henkilö-kohtaiset tietokoneet, tiedon tallennuspalvelut ja multimediasisältö, kuten teräväpiirtotelevisio. Tässä diplomityössä arvioidaan Supermatrixin palveluiden toteutumis-mahdollisuuksia sekä teknologian, että markkinoiden kannalta. Työn tarkoituksena oli myös laskea virtualisoitujen tietokoneiden avulla tuotetun työpöytäpalvelun tuotantokustannus. Kustannuslaskentaa varten testattiin useiden valmistajien teknologioita, ja parhaimmista vaihtoehdoista laskettiin tuotantokustannukset. Tulevia Supermatrix-operaattoreita varten kehitettiin työkalu, jolla työpöytäpalvelun vaatimien investointien kannattavuus saadaan nopeasti selville. Tuotantohintojen laskelmat osoittavat, että työpöytäpalvelua on taloudelli-sesti mahdollista tuottaa luomaan lisäarvoa nopeille laajakaistayhteyksille. Yrityksissä työpöytien virtualisointi on jo tämän päivän teknologiaa, mutta kuluttaja-asiakkaiden innostuminen palvelusta vaatii uuden markkinan luomisen. Uhkana on, että kuluttajien ostokäyttäytymisen muuttaminen ei onnistu, koska Supermatrix ei tuota fyysisen tuotteen ostamisen tarjoamaa mielihyvää.

When to Utilize Software as a Service

Cloud computing enables on-demand network access to shared resources (e.g., computation, networks, servers, storage, applications, and services) that can be rapidly provisioned and released with minimal management effort. Cloud computing refers to both the applications delivered as services over the Internet and the hardware and system software in the data centers. Software as a service (SaaS) is part of cloud computing. It is one of the cloud service models. SaaS is software deployed as a hosted service and accessed over the Internet. In SaaS, the consumer uses the provider‘s applications running in the cloud. SaaS separates the possession and ownership of software from its use. The applications can be accessed from any device through a thin client interface. A typical SaaS application is used with a web browser based on monthly pricing. In this thesis, the characteristics of cloud computing and SaaS are presented. Also, a few implementation platforms for SaaS are discussed. Then, four different SaaS implementation cases and one transformation case are deliberated. The pros and cons of SaaS are studied. This is done based on literature references and analysis of the SaaS implementations and the transformation case. The analysis is done both from the customer‘s and service provider‘s point of view. In addition, the pros and cons of on-premises software are listed. The purpose of this thesis is to find when SaaS should be utilized and when it is better to choose a traditional on-premises software. The qualities of SaaS bring many benefits both for the customer as well as the provider. A customer should utilize SaaS when it provides cost savings, ease, and scalability over on-premises software. SaaS is reasonable when the customer does not need tailoring, but he only needs a simple, general-purpose service, and the application supports customer‘s core business. A provider should utilize SaaS when it offers cost savings, scalability, faster development, and wider customer base over on-premises software. It is wise to choose SaaS when the application is cheap, aimed at mass market, needs frequent updating, needs high performance computing, needs storing large amounts of data, or there is some other direct value from the cloud infrastructure.

Enterprise applications migration to the cloud: risks and opportunities

Millions of enterprises move their applications to a cloud every year. According to Forrester Research “the global cloud computing market will grow from a $40.7 billion in 2011 to $241 billion in 2020”. Due to increased interests and demand broad range of providers and solutions have appeared in the market. It is vital to be able to predict possible problems correctly and to classify and mitigate risks associated with the migration process. The study will show the main criteria that should be taken into consideration while making decision of moving enterprise applications to the cloud and choosing appropriate vendor. The main goal of the research is to identify main problems during the migration to a cloud and propose a solution for their prevention and mitigation of consequences in case of occurrence. The research provides an overview of existing cloud solutions and deployment models for enterprise applications. It identifies decision drivers of an applications migration to a cloud and potential risks and benefits associated with this. Finally, the best practices for the successful enterprise-to-cloud migration based on the case studies analysis are formulated.

REO Flying Cloud 1928 Wolverine

kuv., 10 x 24 cm

Cloud service purchase behavior

This study aims to open up some typical models of organizational buying behavior. As the cloud computing and cloud services seem to be the today´s hype, the study seeks to further facilitate the understanding of organizational buying behavior regarding cloud services by interviewing a decision maker of this field in the purchaser´s side and also for comparison a cloud service provider´s representative from the vendor´s side.

Side peaks in Nb and NbTi point-contact spectra

Superconductor – normal metal point contacts were investigated, using different combinations of Cu, brass, Nb and NbTi. The resulting spectra contained side peaks. The currents at which these side peaks appeared, depended on the radii of the contacts. For contacts with Nb this dependence was quadratic, while for contacts with NbTi it was linear. Based on this, we argue that the side peaks in the case of the Nb contacts are due to the critical current density being exceeded. In contrast, side peaks of the NbTi contacts are caused by the self-magnetic field exceeding the lower critical field of NbTi. The NbTi contacts did not show the expected contribution from the vanishing Maxwell resistance of the superconductor, a question which remained open.

Pilvipalvelun identiteetin- ja pääsynhallinta palveluna

Työn tavoite on ollut tutkia ja rakentaa pilvipalvelun identiteetin- ja pääsynhallinta liiketoimintapalveluksi yrityksille ja organisaatioille. Lähtökohtana on ollut valmiiden identiteetinhallintaohjelmistotuotteiden käyttäminen kehitettävän palvelutuotteen osana. Työssä on ollut tarkoitus selvittää, voiko identiteetinhallintaa ja pääsynhallintaa tuottaa ja tarjota pilvipalveluna kannattavasti. Tutkimusote on ollut konstruktiivinen ja triangulaatiossa on käytetty useaa menetelmää, jotta on saatu selvä kuva liiketoiminnan luonteesta ja tarpeista. Menetelmiä ovat olleet kyselytutkimus ja peste-analyysi. Lisäksi on tehty liiketoimintasuunnitelma ja palveluliiketoiminnan kuvaus Orsterwalderin canvas- menetelmällä. Jokainen tutkimusosa on ollut oleellinen määritettäessä palvelutuotteen ominaisuuksia, koska tavoite on ollut saada mahdollisimman luotettava ja helppokäyttöinen tuote nopeasti kasvaville pilvipalvelumarkkinoille. Tutkimuksen tuloksena on määritelty malli palveluliiketoiminnan tarpeisiin sopivasta turvallisesta palvelualustasta, joka skaalautuu hyvin pilvipalveluiden käytön lisääntyessä voimakkaasti. Liiketoimintasuunnitelman laskelmien avulla on löydetty käyttäjämäärien alarajat kannattavaan liiketoimintaan. Lisäksi on huomattu palvelun rakenteen auttavan yrityksiä ja organisaatiota suojaamaan pilvipalveluiden käyttäjätunnukset ja salasanat väärinkäytöksiltä, mikä on tarpeellista ja ajankohtaista kaikille organisaatioille, jotka harkitsevat pilvipalveluiden käyttöä ja haluavat tehdä sen tietoturvallisesti. Tutkimuksen tuloksena on pystytty määrittelemään, onko liiketoiminta kannattavaa vai ei sekä palvelun tarvitsemat liiketoimintaelementit.

How is OpenAIRE supporting open access policies and infrastructures in Europe? A Nordic point of view!

Presentation at the Nordic Perspectives on Open Access and Open Science seminar, Helsinki, October 15, 2013