State of logistics and transport in the Baltic Sea region in 2025

The world’s pace of change is accelerating and new innovations, inventions and technologies come about every day. Change is unavoidable. It is difficult to keep up and even more difficult to prepare for the future. Even though it is not possible to know exactly what will happen in the future, by studying futures people can better anticipate what might lie ahead. By making decisions and realizing the consequences of their choices today, people and governments are able to actively decide how they will act in the future. Both opportunities and pitfalls lie ahead, which encourages actors to make more farsighted decisions. The Baltic Sea region is an interesting area for futures studies. It comprises 11 nations and more than 100 million inhabitants and entails countries with advanced, high-income economies, like Finland, Germany and Denmark, and developing economies, like Russia, Latvia and Lithuania. The western, eastern, northern and southern parts of the region are separated by the Baltic Sea, which at the same time represents a barrier and a facility for trade and travel between the countries belonging to the region The purpose of this study was to uncover the most probable future of transport and logistics in the Baltic Sea region in 2025 by using the Delphi method. Altogether 109 responses were collected in two separate instances from experts in all the Baltic Sea region countries, 56 of whom were defined as academic respondents and 53 of whom business respondents. Only minor differences in the opinions of academic and business experts were discovered, and the larger differences lie between eastern and western response groups. The Baltic Sea region is a very heterogeneous region and the division is clearest between East and West, which differ in political, economic, social, technological and environmental aspects. The probable future of the Baltic Sea region presented in this study is coherent with previous studies on the same subject. The future of the Baltic Sea region in terms of logistics and transport looks quite bright according to the experts who participated in the study. Trade volumes will grow and the importance of logistics and transport to the competitiveness of the region will increase. Respondents from eastern countries seemed to be more optimistic about the future in general. Most differences between opinions could be explained by the gap in technological and infrastructural development between the East and West. As eastern countries are less-developed in some parts of their economies, it is easier for them to improve the technical condition of infrastructure by merely catching up with the western countries.

Synthesis and Characterization of Cellulose fiber-silica nanocomposites

Cellulose fiber-silica nanocomposites with novel mechanical, chemical and thermal properties have potential to be widely applied in different area. Monodispered silica nanoparticles play an important role in enhancing hybrids properties of hardness, strength, thermal stability etc. On the other hand, cellulose is one of the world’s most abundant and renewable polymers and possesses several unique properties required in many areas and biomedicine. The aim of this master thesis is to study if silica particles from reaction of sodium silicate and sulphuric acid can be adsorbed onto cellulose fiber surfaces via in situ growth. First, nanosilica particles were synthesized. Effect of pH and silica contents were tested. In theoretical part, introduction of silica, methods of preparation of nanosilica from sodium silicate, effect factors and additives were discussed. Then, cellulose fiber-silica nanocomposites were synthesis via route from sodium silicate and route silicic acid. In the experiment of route from sodium silicate, the effects of types of sodium silicate, pH and target ratio of silica to fiber were investigated. From another aspect, the effects of types of sodium silicate, fiber concentration in mixture solution and target ratio of silica to fiber were tested in the experiment of route from silicic acid. Samples were investigated via zeta potential measurement, particle size distribution, ash content measurement and Scanning Electron Microscopy (SEM). The Results of the experiment of preparing silica sol were that the particle size of silica sol was smaller prepared in pH 11.7 than that prepared in pH 9.3. Then in the experiment of synthesis of cellulose fiber-silica nanocomposites, it was concluded that the zeta potential of all the samples were around -16 mV and the highest ash content of all the samples was only 1.4%. The results of SEM images showed only a few of silica particles could be observed on the fiber surface, which corresponded to the value of ash content measurement.

Production of magnesium carbonates from serpentinites for CO2 mineral sequestration : optimisation towards industrial application

Global warming is one of the most alarming problems of this century. Initial scepticism concerning its validity is currently dwarfed by the intensification of extreme weather events whilst the gradual arising level of anthropogenic CO2 is pointed out as its main driver. Most of the greenhouse gas (GHG) emissions come from large point sources (heat and power production and industrial processes) and the continued use of fossil fuels requires quick and effective measures to meet the world’s energy demand whilst (at least) stabilizing CO2 atmospheric levels. The framework known as Carbon Capture and Storage (CCS) – or Carbon Capture Utilization and Storage (CCUS) – comprises a portfolio of technologies applicable to large‐scale GHG sources for preventing CO2 from entering the atmosphere. Amongst them, CO2 capture and mineralisation (CCM) presents the highest potential for CO2 sequestration as the predicted carbon storage capacity (as mineral carbonates) far exceeds the estimated levels of the worldwide identified fossil fuel reserves. The work presented in this thesis aims at taking a step forward to the deployment of an energy/cost effective process for simultaneous capture and storage of CO2 in the form of thermodynamically stable and environmentally friendly solid carbonates. R&D work on the process considered here began in 2007 at Åbo Akademi University in Finland. It involves the processing of magnesium silicate minerals with recyclable ammonium salts for extraction of magnesium at ambient pressure and 400‐440⁰C, followed by aqueous precipitation of magnesium in the form of hydroxide, Mg(OH)2, and finally Mg(OH)2 carbonation in a pressurised fluidized bed reactor at ~510⁰C and ~20 bar PCO2 to produce high purity MgCO3. Rock material taken from the Hitura nickel mine, Finland, and serpentinite collected from Bragança, Portugal, were tested for magnesium extraction with both ammonium sulphate and bisulphate (AS and ABS) for determination of optimal operation parameters, primarily: reaction time, reactor type and presence of moisture. Typical efficiencies range from 50 to 80% of magnesium extraction at 350‐450⁰C. In general ABS performs better than AS showing comparable efficiencies at lower temperature and reaction times. The best experimental results so far obtained include 80% magnesium extraction with ABS at 450⁰C in a laboratory scale rotary kiln and 70% Mg(OH)2 carbonation in the PFB at 500⁰C, 20 bar CO2 pressure for 15 minutes. The extraction reaction with ammonium salts is not at all selective towards magnesium. Other elements like iron, nickel, chromium, copper, etc., are also co‐extracted. Their separation, recovery and valorisation are addressed as well and found to be of great importance. The assessment of the exergetic performance of the process was carried out using Aspen Plus® software and pinch analysis technology. The choice of fluxing agent and its recovery method have a decisive sway in the performance of the process: AS is recovered by crystallisation and in general the whole process requires more exergy (2.48–5.09 GJ/tCO2sequestered) than ABS (2.48–4.47 GJ/tCO2sequestered) when ABS is recovered by thermal decomposition. However, the corrosive nature of molten ABS and operational problems inherent to thermal regeneration of ABS prohibit this route. Regeneration of ABS through addition of H2SO4 to AS (followed by crystallisation) results in an overall negative exergy balance (mainly at the expense of low grade heat) but will flood the system with sulphates. Although the ÅA route is still energy intensive, its performance is comparable to conventional CO2 capture methods using alkanolamine solvents. An energy‐neutral process is dependent on the availability and quality of nearby waste heat and economic viability might be achieved with: magnesium extraction and carbonation levels ≥ 90%, the processing of CO2‐containing flue gases (eliminating the expensive capture step) and production of marketable products.

Macro- and Microevolution of Languages: Exploring Linguistic Divergence with Approaches from Evolutionary Biology

There are more than 7000 languages in the world, and many of these have emerged through linguistic divergence. While questions related to the drivers of linguistic diversity have been studied before, including studies with quantitative methods, there is no consensus as to which factors drive linguistic divergence, and how. In the thesis, I have studied linguistic divergence with a multidisciplinary approach, applying the framework and quantitative methods of evolutionary biology to language data. With quantitative methods, large datasets may be analyzed objectively, while approaches from evolutionary biology make it possible to revisit old questions (related to, for example, the shape of the phylogeny) with new methods, and adopt novel perspectives to pose novel questions. My chief focus was on the effects exerted on the speakers of a language by environmental and cultural factors. My approach was thus an ecological one, in the sense that I was interested in how the local environment affects humans and whether this human-environment connection plays a possible role in the divergence process. I studied this question in relation to the Uralic language family and to the dialects of Finnish, thus covering two different levels of divergence. However, as the Uralic languages have not previously been studied using quantitative phylogenetic methods, nor have population genetic methods been previously applied to any dialect data, I first evaluated the applicability of these biological methods to language data. I found the biological methodology to be applicable to language data, as my results were rather similar to traditional views as to both the shape of the Uralic phylogeny and the division of Finnish dialects. I also found environmental conditions, or changes in them, to be plausible inducers of linguistic divergence: whether in the first steps in the divergence process, i.e. dialect divergence, or on a large scale with the entire language family. My findings concerning Finnish dialects led me to conclude that the functional connection between linguistic divergence and environmental conditions may arise through human cultural adaptation to varying environmental conditions. This is also one possible explanation on the scale of the Uralic language family as a whole. The results of the thesis bring insights on several different issues in both a local and a global context. First, they shed light on the emergence of the Finnish dialects. If the approach used in the thesis is applied to the dialects of other languages, broader generalizations may be drawn as to the inducers of linguistic divergence. This again brings us closer to understanding the global patterns of linguistic diversity. Secondly, the quantitative phylogeny of the Uralic languages, with estimated times of language divergences, yields another hypothesis as to the shape and age of the language family tree. In addition, the Uralic languages can now be added to the growing list of language families studied with quantitative methods. This will allow broader inferences as to global patterns of language evolution, and more language families can be included in constructing the tree of the world’s languages. Studying history through language, however, is only one way to illuminate the human past. Therefore, thirdly, the findings of the thesis, when combined with studies of other language families, and those for example in genetics and archaeology, bring us again closer to an understanding of human history.

The Janus-faced City: A Sensory History of the London Blitz 1940–1941

The city of London was, during the years of 1940–1941, a city under fire. The metropolis seemed to have two faces, like the Roman deity Janus: the face of the daylight hours, so normal, and yet so deceiving in its false quietness – and at nightfall, the city turned, and the face of it was the face of the devil himself, transforming London into a living inferno. This thesis examines the sensescapes of the Blitz, through the diaries and memoirs written of that time. The primary sources consist of seven different diaries, two autobiographies, and four research volumes that contain multiple diary- and memoire entries, mostly from the Mass Observation Archives and from the Imperial War Museum. The sensory approach is a new orientation in the field of history – it studies the five senses in their cultural contexts, interpreting the often subtle ways in which the senses affect into society, politics, culture, and class hierarchies, to name only but few. The subject of the sensory history of war is a theme widely unexamined: this thesis contributes to this frontier field by unveiling the sensorium of the London bombings, comparing the differences between the halves of nychtemeron, and examining how the Blitz was communicated by the writers as a lived, bodily experience. This study reveals the very different sensory worlds in which the Londoners lived, during a time that is often described with the mythical solidarity that was thought to exist between the people. The reality of the homeless, working class, and poor were in the foul smelling tubes, poor law -dated rations, and in the smoking ruins of East End – the contrast was massive reflecting it to the luxury hotels and restaurants of the upper classes, opportunities for evacuation, sheltering possibilities, and overall comforts of life.