Construction Plan Image Service for Mobile Devices

The forthcoming media revolution of exchanging paper documents to digital media in construction engineering requires new tools to be developed. The basis of this bachelor’s thesis was to explore the preliminary possibilities of exporting imagery from a Building Information Modelling –software to a mobile phone on a construction yard. This was done by producing a Web Service which uses the design software’s Application Programming Interface to interact with a structures model in order to produce the requested imagery. While mobile phones were found lacking as client devices, because of limited processing power and small displays, the implementation showed that the Tekla Structures API can be used to automatically produce various types of imagery. Web Services can be used to transfer this data to the client. Before further development the needs of the contractor, benefits for the building master and inspector and the full potential of the BIM-software need to be mapped out with surveys.

Reducing contact resistance in graphene devices

In this thesis, the contact resistance of graphene devices was investigated because high contact resistance is detrimental to the performance of graphene field-effect transistors (GFET). Method for increasing so-called edge-contact area was applied in device fabrication process, as few nanometers thick Ni layer was used as a catalytic etchant during the annealing process. Finally, Ni was also used as a metal for contact. GFETs were fabricated using electron beam lithography using graphene fabricated by chemical vapor deposition (CVD). Critical part of the fabrication process was to preserve the high quality of the graphene channel while etching the graphene at contact areas with Ni during the annealing. This was achieved by optimizing the combination of temperature and gas flows. The structural properties of graphene were studied using scanning electron microscopy, scanning confocal μ-Raman spectroscopy and optical microscopy. Evaluation of electric transport properties including contact resistance was carried out by transmission line method and four-probe method. The lowest contact resistance found was about at 350 Ωμm. In addition, different methods to transfer CVD graphene synthesized on copper were studied. Typical method using PMMA as a supporting layer leaves some residues after its removal, thus effecting on the performance of a graphene devices. In a metal assisted transfer method, metal is used as an interfacial layer between PMMA and graphene. This allows more effective removal of PMMA. However, Raman spectra of graphene transferred by metal assisted method showed somewhat lower quality than the PMMA assisted method

Minimizing Circulating Current in Parallel-Connected Photovoltaic Inverters

Parallel-connected photovoltaic inverters are required in large solar plants where it is not economically or technically reasonable to use a single inverter. Currently, parallel inverters require individual isolating transformers to cut the path for the circulating current. In this doctoral dissertation, the problem is approached by attempting to minimize the generated circulating current. The circulating current is a function of the generated common-mode voltages of the parallel inverters and can be minimized by synchronizing the inverters. The synchronization has previously been achieved by a communication link. However, in photovoltaic systems the inverters may be located far apart from each other. Thus, a control free of communication is desired. It is shown in this doctoral dissertation that the circulating current can also be obtained by a common-mode voltage measurement. A control method based on a short-time switching frequency transition is developed and tested with an actual photovoltaic environment of two parallel inverters connected to two 5 kW solar arrays. Controls based on the measurement of the circulating current and the common-mode voltage are generated and tested. A communication-free method of controlling the circulating current between parallelconnected inverters is developed and verified.

Spectroscopic Studies of III-V Semiconductor Materials for Improved Devices

Defects in semiconductor crystals and at their interfaces usually impair the properties and the performance of devices. These defects include, for example, vacancies (i.e., missing crystal atoms), interstitials (i.e., extra atoms between the host crystal sites), and impurities such as oxygen atoms. The defects can decrease (i) the rate of the radiative electron transition from the conduction band to the valence band, (ii) the amount of charge carriers, and (iii) the mobility of the electrons in the conduction band. It is a common situation that the presence of crystal defects can be readily concluded as a decrease in the luminescence intensity or in the current flow for example. However, the identification of the harmful defects is not straightforward at all because it is challenging to characterize local defects with atomic resolution and identification. Such atomic-scale knowledge is however essential to find methods for reducing the amount of defects in energy-efficient semiconductor devices. The defects formed in thin interface layers of semiconductors are particularly difficult to characterize due to their buried and amorphous structures. Characterization methods which are sensitive to defects often require well-defined samples with long range order. Photoelectron spectroscopy (PES) combined with photoluminescence (PL) or electrical measurements is a potential approach to elucidate the structure and defects of the interface. It is essential to combine the PES with complementary measurements of similar samples to relate the PES changes to changes in the interface defect density. Understanding of the nature of defects related to III-V materials is relevant to developing for example field-effect transistors which include a III-V channel, but research is still far from complete. In this thesis, PES measurements are utilized in studies of various III-V compound semiconductor materials. PES is combined with photoluminescence measurements to study the SiO2/GaAs, SiNx/GaAs and BaO/GaAs interfaces. Also the formation of novel materials InN and photoluminescent GaAs nanoparticles are studied. Finally, the formation of Ga interstitial defects in GaAsN is elucidated by combining calculational results with PES measurements.

Kerrostalon kiinteistösähkönkulutuksen kompensointi aurinkosähköjärjestelmällä

Aurinkopaneeleiden hinta on laskenut reilusti viime vuosien aikana. Hinnan laskun seurauksena aurinkosähköjärjestelmiä on asennettu paljon yksityisiin rakennuksiin sekä Suomessa että muualla maailmassa. Tässä kandidaatintyössä tutkitaan kerrostalon kiinteistösähkönkulutuksen kompensointia aurinkosähköjärjestelmällä. Kompensointia tutkitaan, koska näin saadaan taloudellisesti paras hyöty aurinkosähköjärjestelmästä. Kerrostalon kiinteistösähkönkulutuksella tarkoitetaan talon teknisten järjestelmien kuluttamaa sähköä. Järjestelmän sijoitusta tutkitaan katolle ja parvekekaiteisiin. Katolle sijoitettuna aurinkopaneelien tuotantoa tutkitaan siten, että paneelit ovat asennettu 45° ja 15° tasokulmaan. Aurinkosähköjärjestelmän investoinnin kannattavuutta tutkitaan taloyhtiön näkökulmasta.

A SOA-based Framework for Multi-Devices and Multi-Platform User Interfaces

This thesis reports investigations on applying the Service Oriented Architecture (SOA) approach in the engineering of multi-platform and multi-devices user interfaces. This study has three goals: (1) analyze the present frameworks for developing multi-platform and multi-devices applications, (2) extend the principles of SOA for implementing a multi-platform and multi-devices architectural framework (SOA-MDUI), (3) applying and validating the proposed framework in the context of a specific application. One of the problems addressed in this ongoing research is the large amount of combinations for possible implementations of applications on different types of devices. Usually it is necessary to take into account the operating system (OS), user interface (UI) including the appearance, programming language (PL) and architectural style (AS). Our proposed approach extended the principles of SOA using patterns-oriented design and model-driven engineering approaches. Synthesizing the present work done in these domains, this research built and tested an engineering framework linking Model-driven Architecture (MDA) and SOA approaches to developing of UI. This study advances general understanding of engineering, deploying and managing multi-platform and multi-devices user interfaces as a service.

Lämminvesivaraajan ohjaus automaatiolla aurinkosähköä tuottavassa kotitaloudessa

Hajautettu sähköntuotanto aurinkopaneeleilla on Suomessa kasvussa. Kotitalouksiin asennettujen aurinkopaneelijärjestelmien määrä kasvaa jatkuvasti, mutta suuri osa tuotetusta sähköenergiasta syötetään sähköverkkoon. Tämä johtuu aurinkosähkön tuotannon painottumisesta kesäpäiviin, jolloin kotitalouksien kulutus on pienimmillään. Suurin hyöty itse tuotetusta energiasta saadaan kuitenkin käyttämällä se tuotantokohteessa, jolla minimoidaan energiansiirto sähköverkon ja kotitalouden rajapinnassa. Siirtämällä kotitalouden suurimpia kuormia aurinkosähkön mukaan ohjatuksi, voidaan saavuttaa merkittäviä parannuksia tuotetun sähkön omakäyttöasteessa. Helpoimmillaan tämä onnistuu kellokytkimellä, joka ajoittaa kulutuksen parhaimman tuotannon ajalle. Tämä ei kuitenkaan poista ongelmaa tilanteissa, jossa aurinkosähkön tuotanto on häiriintynyt esimerkiksi pilvisyyden takia aamupäivällä ja huipputuotanto saavutetaan vasta iltapäivän puolella. Saatavilla on jo useita järjestelmiä, jotka ohjaavat kodin laitteita tuotannon mukaisesti. Suuri osa näistä järjestelmistä on kuitenkin suunniteltu toimimaan vain tuotetun energiamäärän mukaisesti, ottamatta huomioon kotitaloudessa olevaa muuta, automaation piiriin kuulumatonta kulutusta. Tässä kandidaatin työssä vertaillaan sähköenergian eri mittaustapoja ja niiden vaikutusta siirretyn energian laskennalliseen määrään. Lisäksi työssä tutkitaan lämminvesivaraajan kuormanohjausta käyttäen termostaatti-, kellokytkin- ja logiikkaohjausta. Työssä esitelty logiikkaohjaus hyödyntää siirretyn energian mittausta sähköverkon ja kotitalouden rajapinnassa, ottaen automaattisesti huomioon myös talouden muun kulutuksen. Työssä esitellään myös esimerkkilaitteisto, jolla suunniteltu logiikka voidaan toteuttaa.

Characterization and Investigation on Material Compatibilities of Building Integrated Photovoltaic Module Components

Building Integrated Photovoltaics (BIPV) are considered as the future of photovoltaic (PV) technology. The advantage of BIPV system is its multi-functionality; they fulfil the functions of a building envelope with the added benefit of generating power by replacing the traditional roofing and façade materials with PV that generate power. In this thesis, different types of PV cells and modules have been described in detail with their efficiencies and usage trends in the last decade. The different BIPV products for roof and façade are discussed in detail giving several examples. The electricity generation potential of BIPV in selected countries is compared with their actual electricity consumption. Further, the avoided greenhouse gas (GHG) emissions associated with electricity generation from traditional sources and transportation and distribution (T&D) losses are calculated. The results illustrate huge savings in GHGs. In BIPV different types of façade and backsheets are used. In this thesis, selected backsheets and façade were characterized in terms of their surface structure identification using infrared spectroscopy (FTIR-ATR), scanning electron microscopy with energy dispersive X-ray (SEM-EDX) and physical characterization using surface energy measurements. By using FTIR-ATR, surface polymeric materials were identified and with SEM-EDX, identification of the surface elements was possible. Surface energy measurements were useful in finding the adhesives and knowing the surface energies of the various backsheets and façade. The strength of adhesion between the facade and backsheets was studied using peel test. Four different types of adhesives were used to study the fracture pattern and peel tests values to identify the most suitable adhesive. It was found out that pretreatment increased the adhesive strength significantly.