Whistleblowing process in Finnish health care

Wrongdoing in health care is harmful action that jeopardizes patient safety and can be targeted at the patient or employees. Wrongdoing can vary from illegal, unethical or unprofessional action to inappropriate behavior in the workplace. Whistleblowing can be considered as a process where wrongdoing is suspected or oberved in health care by health care professionals and disclosed to the party that can influence the wrongful action. Whistleblowing causes severe harm to the whistleblower and to the object of whistleblowing complaint, to their personnel life and working community. The aim of this study was to analyze whistleblowing process in Finnish health care. The overall goal is to raise concern about wrongdoing and whistleblowing in Finnish health care. In this cross-sectional descriptive study the data were collected (n = 397) with probability sampling from health care professionals and members of The Union of Health and Social Care Professionals in Finland Tehy. The data were collected with questionnaire: “Whistleblowing -väärinkäytösten paljastaminen terveydenhuollossa” developed for this study and by using Webropol questionnaire -software during 26.6.-17.7.2015. The data were analyzed statistically. According to the results of this study health care professionals had suspected (67 %) and observed (66 %) wrongdoing in health care, more often than once a month (30%). Mostly were suspected (37 %) and observed (36%) inadequacy of the personnel and least violence toward the patient (3 %). Wrongdoing was whistle blown (suspected 29 %, observed 40 %) primarily inside the organization to the closest supervisor (76 %), face-to-face (88 %). Mostly the whistle was blown on nurses’ wrongdoing (58 %). Whistleblowing act didn’t end the wrongdoing (52 %) and whistleblowing had negative consequences to the whistleblower such as discrimination by the manager (35 %). Respondents with work experience less than ten years (62 %), working in temporary position (75 %) or in management position (88 %) were, more unwilling to blow the whistle. Whistleblowing should be conducted internally, to the closest manager in writing and anonymously. Wrongdoing should be dealt between the parties involved, and written warning should ensue from wrongdoing. According to the results of this study whistleblowing on wrongdoing in health care causes negative consequences to the whistleblower. In future, attention in health care should be paid to preventing wrongdoing and enhancing whistleblowing in order to decrease wrongdoing and lessen the consequences that whistleblowers face after blowing the whistle.

Virtual Runtime Application Partitions for Resource Management in Massively Parallel Architectures

This thesis presents a novel design paradigm, called Virtual Runtime Application Partitions (VRAP), to judiciously utilize the on-chip resources. As the dark silicon era approaches, where the power considerations will allow only a fraction chip to be powered on, judicious resource management will become a key consideration in future designs. Most of the works on resource management treat only the physical components (i.e. computation, communication, and memory blocks) as resources and manipulate the component to application mapping to optimize various parameters (e.g. energy efficiency). To further enhance the optimization potential, in addition to the physical resources we propose to manipulate abstract resources (i.e. voltage/frequency operating point, the fault-tolerance strength, the degree of parallelism, and the configuration architecture). The proposed framework (i.e. VRAP) encapsulates methods, algorithms, and hardware blocks to provide each application with the abstract resources tailored to its needs. To test the efficacy of this concept, we have developed three distinct self adaptive environments: (i) Private Operating Environment (POE), (ii) Private Reliability Environment (PRE), and (iii) Private Configuration Environment (PCE) that collectively ensure that each application meets its deadlines using minimal platform resources. In this work several novel architectural enhancements, algorithms and policies are presented to realize the virtual runtime application partitions efficiently. Considering the future design trends, we have chosen Coarse Grained Reconfigurable Architectures (CGRAs) and Network on Chips (NoCs) to test the feasibility of our approach. Specifically, we have chosen Dynamically Reconfigurable Resource Array (DRRA) and McNoC as the representative CGRA and NoC platforms. The proposed techniques are compared and evaluated using a variety of quantitative experiments. Synthesis and simulation results demonstrate VRAP significantly enhances the energy and power efficiency compared to state of the art.

How computer programmers work : understanding software development in practise

Hur arbetar en framgångsrik programmerare? Uppgifterna att programmera datorspel och att programmera industriella, säkerhetskritiska system verkar tämligen olika. Genom en noggrann empirisk undersökning jämför och kontrasterar avhandlingen dessa två former av programmering och visar att programmering innefattar mer än teknisk förmåga. Med utgångspunkt i hermeneutisk och retorisk teori och med hjälp av både kulturvetenskap och datavetenskap visar avhandlingen att programmerarnas tradition och värderingar är grundläggande för deras arbete, och att båda sorter av programmering kan uppfattas och analyseras genom klassisk texttolkningstradition. Dessutom kan datorprogram betraktas och analyseras med hjälp av klassiska teorier om talproduktion i praktiken - program ses då i detta sammanhang som ett slags yttranden. Allt som allt förespråkar avhandlingen en återkomst till vetenskapens grunder, vilka innebär en ständig och oupphörlig cyklisk rörelse mellan att erfara och att förstå. Detta står i kontrast till en reduktionistisk syn på vetenskapen, som skiljer skarpt mellan subjektivt och objektivt, och på så sätt utgår från möjligheten att uppnå fullständigt vetande. Ofullständigt vetande är tolkandets och hermeneutikens domän. Syftet med avhandlingen är att med hjälp av exempel demonstrera programmeringens kulturella, hermeneutiska och retoriska natur.

Tuoteturvallisuusriskien hallinta suorituskyvyn johtamisen tukena sähkö- ja elektroniikkateollisuudessa

Eurooppalaisia ja suomalaisia markkinavalvontatilastoja tutkimalla havaitaan, ettei tuoteturvallisuuden hallinta ole itsestään selvää sähkö- ja elektroniikka-alalla. Vuodesta 2000 maaliskuuhun 2006Euroopan markkinoilla havaittiin 3040 vaarallista kuluttajien käyttöön tarkoitettua sähkötuotetta. Työn päätavoitteena on selvittää, miten tuoteturvallisuusriskien hallinta kytkeytyy yrityksen suorituskyvyn johtamiseen. Työssä on käytetty konstruktiivista tutkimusotetta. Aineistopohjaisen analyysin avulla kartoitetaan suorituskyvyn johtamisen teoriaa, suorituskyvyn käytännön mittaamista pienissä ja keskisuurissa yrityksissä sekä tuoteturvallisuusriskejä jariskienhallinnan periaatteita. Lisäksi kartoitetaan lainsäädännön vaatimuksia, tuotesuunnittelua, valmistusta ja osaamista sekä tarkastellaan tuoteturvallisuuden viranomaisvalvonnan tuloksia. Tutkimuksessa analysoidaan kirjallisuutta ja tilastoja etsien tuoteriskien hallinnan ja suorituskyvyn johtamisen välistä yhteyttä. Analyysiä täydennetään tutkimuksen tekijän kokemuksella tuoteturvallisuuden testauksesta ja sertifioinnista, standardisoimistyöstä sekä tuoteturvallisuuden viranomaisvalvonnasta. Riskienhallinta muodostaa parhaimmillaan osan yrityksen johtamis- ja hallintakäytäntöä. Tuoteturvallisuusriskien hallinta on yrityksen strateginen päätös, joka tukee suorituskyvyn johtamista. Työssämallinnetaan kolme toimintatapaa, joilla eri kehitysvaiheessa olevat sähkö- ja elektroniikkateollisuuden valmistajat voivat hallita tuoteturvallisuusriskejään.Työssä kootaan yhteen tuoteturvallisuuden tekijöitä, jotka suorituskyvyn mittareissa monitoroivat tuoteriskien tilaa. Lisäksi kootaan yhteen riskienhallinnan kustannuksia, joilla yritys voi arvioida etukäteen kokonaiskustannuksia.

Suurnopeuskompressorin tekninen markkinoilletuonti

Diplomityössä tarkastellaan suurnopeuskompressorin kehityspolkua suurnopeusteknologian lähtökohdista prototyypiksi ja edelleen teolliseksi tuotteeksi. Työssä tarkastelun kohteena on sähköteholtaan 20….250 kW oleva, suurnopeussähkökoneella ja öljyttömillä magneettilaakereilla varustettu keskipainekompressori. Tyypillisesti kompressorin painesuhde on 1,2 … 2,4. Ko. kompressorin käyttökohteina on tarkasteltu mm. pienen kunnallisen jätevedenpuhdistamon käsittelyaltaiden ilmastusta, suuren kaupungin vastaavan puhdistuslaitoksen ilmastuskäyttöä ja teollista käyttöä lasivillatehtaan ns. linkokompressorina. Suurnopeuskompressori soveltuu hyvin rinnankytkentään ns. ryhmäohjaimen avulla, jolloin rinnan voi olla kytkettynä jopa 16 kompressoria, joiden päällä oloa optimoidaan säätöteknisesti niin, että koko laitos on kuin yksi kompressori. Työssä tarkastellaan myös kompressorin em. sovellutuksista yli kahdeksan vuoden ajalta kaupallista kohteista saatuja käyttökokemuksia. Pääsäätöisesti voi sanoa, että jokaisessa uudessa sovellutuksessa ilmenee uusia reunaehtoja ja järjestelmäkohtaisia vaatimuksia, jotka täytyy huomioida kompressorin säädössä ja ominaisparametreissa.

Architecture for a Session Initiation Protocol Based Presence Client

Mitä on läsnäolo? Tämä työ määrittelee läsnäolon tietyn henkilön, laitteen tai palvelun halukkuudeksi kommunikoida. Nykyään on olemassa lukuisia läsnäolotietoa levittäviä sovelluksia, joista jokainen käyttää erilaista protokollaa tehtävän suorittamiseen. Vasta viime aikoina sovellusten kehittäjät ovat huomanneet tarpeen yhdelle sovellukselle, joka kykenee tukemaan lukuisia läsnäoloprotokollia. Session Initiation Protocol (SIP) voi levittää läsnäolotietoa muiden ominaisuuksiensa lisäksi. Kun muita protokollia käytetään vain reaaliaikaiseen viestintään ja läsnäolotiedon lähetykseen, SIP pystyy moniin muihinkin asioihin. Se on alunperin suunniteltu aloittamaan, muuttamaan ja lopettamaan osapuolien välisiä multimediaistuntoja. Arkkitehtuurin toteutus käyttää kahta Symbian –käyttöjärjestelmän perusominaisuutta: asiakas-palvelin rakennetta ja kontaktitietokantaa. Asiakaspalvelin rakenne erottaa asiakkaan protokollasta tarjoten perustan laajennettavalle usean protokollan arkkitehtuurille ja kontaktitietokanta toimii läsnäolotietojen varastona. Työn tuloksena on Symbianin käyttöjärjestelmässä toimiva läsnäoloasiakas.

Problems of the architecture design in the system integration

This thesis studies the problems and their reasons a software architect faces in his work. The purpose of the study is to search and identify potential factors causing problens in system integration and software engineering. Under a special interest are non-technical factors causing different kinds of problems. Thesis was executed by interviewing professionals that took part in e-commerce project in some corporation. Interviewed professionals consisted of architects from technical implementation projects, corporation's architect team leader, different kind of project managers and CRM manager. A specific theme list was used as an guidance of the interviews. Recorded interviews were transcribed and then classified using ATLAS.ti software. Basics of e-commerce, software engineering and system integration is described too. Differences between e-commerce and e-business as well as traditional business are represented as are basic types of e-commerce. Software's life span, general problems of software engineering and software design are covered concerning software engineering. In addition, general problems of the system integration and the special requirements set by e-commerce are described in the thesis. In the ending there is a part where the problems founded in study are described and some areas of software engineering where some development could be done so that same kind of problems could be avoided in the future.

Cumulative Costs of Caries Prevention and Treatment in Children - with Special Reference to Work Division and Cohort Effect

Lapsen karieshoidon kustannuskertymän muutokset ja karieshoidon toimintakäytäntöjen yhteys kustannuksiin Tutkimuksen tavoitteena oli mitata terveyskeskuksessa hoidettavien lasten karieshoidon kumulatiivisia kustannuksia ja verrata niitä kahden erilaisen toimintatavan välillä. Lisäksi tarkasteltiin lasten hampaiden terveyttä. Tutkimus tehtiin julkisen palvelutuottajan näkökulmasta. Tutkimusaineisto kerättiin Kemin ja Tornion terveyskeskusten suun terveydenhuollon potilaskertomuksista. Kemin kohortit 1980, 1983 ja 1986 (n = 600) ja Tornion kohortit 1980 ja 1992 (n = 400) edustivat perinteistä ja Kemin kohortit 1989, 1992 ja 1995 (n = 600) uutta toimintatapaa työnjaon ja ehkäisyn ajoituksen suhteen. Kohortteja ja kaupunkeja verrattiin hampaiden terveyden (dmft/DMFT = 0 ja dmft ja DMFT keskiarvot 5 ja 12 vuoden iässä) ja voimavarojen käytön suhteen. Panoskäyttö johdettiin käyntimäärien avulla laskennallisen työajan kautta. Kustannuskertymät muodostettiin käyttämällä henkilöstömenoista laskettuja suorittajakohtaisia yksikkökustannuksia. Panoskäytön ja yksikkökustannusten kautta muodostettiin kustannuskertymät. Kustannusten ja terveysvaikutusten suhteita arvioitiin kustannus-vaikuttavuusanalyysissä. Suuhygienistien työpanosta hyödyntävällä varhaisen ehkäisyn toimintamallilla saavutettiin vähäisemmin kustannuksin alle kouluiässä parempi ja kouluiässä yhtä hyvä hammasterveys kuin perinteisellä, enemmän hammaslääkärien työpanokseen perustuvalla tavalla. Karieksen hoitoon liittyvien käyntien määrä oli nuorimmissa syntymävuosikohorteissa pienempi kuin vanhimmissa kohorteissa. Käynnit hammaslääkärissä vähenivät eniten. Toimintatavalla oli merkittävä vaikutus lapsen karieshoidon kokonaiskustannuksiin. Herkkyysanalyysin mukaan karieshoidon kustannukset olivat työnjakoa hyödyntämällä kolmanneksen pienemmät, kuin jos hoidon suorittajana olisi ollut ainoastaan hammaslääkäri-hoitaja työpari. Lasten karieshoidon kustannusvaikuttavuus kohentui molemmissa terveyskeskuksissa nuoremmissa kohorteissa vanhempiin verrattuna. Suun terveydenhuollon potilaskertomuksia olisi hyödynnettävä toiminnan kehittämisessä. Varhaisen ehkäisyn avulla voitaisiin kaikkien suun terveydenhuollon ammattihenkilöiden työpanos kohdentaa kustannustehokkaasti.

Factors Affecting Consumer’s Illicit Purchase of Copyrighted Digital Work

Peer-to-Peer (P2P) technology has revolutionized file exchange activities besides enhancing processing power distribution. As such, this technology which is nowadays made freely available to all internet users also imposes a threat as it enables the illegal distribution of copyrighted digital work. P2P technology continuously evolves in a greater pace than copyright legislation, leading to compatibility gaps between the applicability of copyright law and the illicit file sharing and downloading. Such issues give high incentives to consumers to practise piracy using P2P systems with a low perception of risk towards prosecution, leading to substantial losses for copyright owners. This study focuses on developing insights for content owners on consumer behaviour towards piracy in Finland, where quantitative analyses are assessed using a data set based on a survey conducted by the Helsinki Institute for IT. The research approach investigates the significance of three fundamental areas in relation to evaluate consumer behaviour as: environmental-related factors, innovation-related factors and consumer-related. each of these are integrates concepts derived in previous theoretical models such as the technology acceptance model, theory of reasoned action, theory of planned behaviour, the issue-risk-judgement model and the Hunt & Vitell’s model.

Novel Robot Solutions for Carrying out Field Joint Welding and Machining in the Assembly of the Vacuum Vessel of ITER

It is necessary to use highly specialized robots in ITER (International Thermonuclear Experimental Reactor) both in the manufacturing and maintenance of the reactor due to a demanding environment. The sectors of the ITER vacuum vessel (VV) require more stringent tolerances than normally expected for the size of the structure involved. VV consists of nine sectors that are to be welded together. The vacuum vessel has a toroidal chamber structure. The task of the designed robot is to carry the welding apparatus along a path with a stringent tolerance during the assembly operation. In addition to the initial vacuum vessel assembly, after a limited running period, sectors need to be replaced for repair. Mechanisms with closed-loop kinematic chains are used in the design of robots in this work. One version is a purely parallel manipulator and another is a hybrid manipulator where the parallel and serial structures are combined. Traditional industrial robots that generally have the links actuated in series are inherently not very rigid and have poor dynamic performance in high speed and high dynamic loading conditions. Compared with open chain manipulators, parallel manipulators have high stiffness, high accuracy and a high force/torque capacity in a reduced workspace. Parallel manipulators have a mechanical architecture where all of the links are connected to the base and to the end-effector of the robot. The purpose of this thesis is to develop special parallel robots for the assembly, machining and repairing of the VV of the ITER. The process of the assembly and machining of the vacuum vessel needs a special robot. By studying the structure of the vacuum vessel, two novel parallel robots were designed and built; they have six and ten degrees of freedom driven by hydraulic cylinders and electrical servo motors. Kinematic models for the proposed robots were defined and two prototypes built. Experiments for machine cutting and laser welding with the 6-DOF robot were carried out. It was demonstrated that the parallel robots are capable of holding all necessary machining tools and welding end-effectors in all positions accurately and stably inside the vacuum vessel sector. The kinematic models appeared to be complex especially in the case of the 10-DOF robot because of its redundant structure. Multibody dynamics simulations were carried out, ensuring sufficient stiffness during the robot motion. The entire design and testing processes of the robots appeared to be complex tasks due to the high specialization of the manufacturing technology needed in the ITER reactor, while the results demonstrate the applicability of the proposed solutions quite well. The results offer not only devices but also a methodology for the assembly and repair of ITER by means of parallel robots.

Enterprise architecture – the foundation for a strategy

This artcle describes work done with enterprise architecture of the National Digital Library. The National Digital Library is an initiative of the Finnish Ministry of Education and Culture. Its purpose is to promote the availability of the digital information resources of archives, libraries and museums, and to develope the long-term preservation of digital cultural heritage materials. Enterprise architectures are a tool for strategic management and planning. An enterprise architecture also functions as an aid at a more practical level. It shows, for example, what kind of changes and improvements may be made in one system without overlap or conflict with other systems.

Mobile learning and video experience in delivering digital content

In recent years, the worldwide distribution of smartphone devices has been growing rapidly. Mobile technologies are evolving fast, a situation which provides new possibilities for mobile learning applications. Along with new delivery methods, this development enables new concepts for learning. This study focuses on the effectiveness and experience of a mobile learning video promoting the key features of a specific device. Through relevant learning theories, mobile technologies and empirical findings, the thesis presents the key elements for a mobile learning video that are essential for effective learning. This study also explores how previous experience with mobile services and knowledge of a mobile handset relate to final learning results. Moreover, this study discusses the optimal delivery mechanisms for a mobile video. The target group for the study consists of twenty employees of a Sanoma Company. The main findings show that the individual experience of learning and the actual learning results may differ and that the design for certain video elements, such as sound and the presentation of technical features, can have an impact on the experience and effectiveness of a mobile learning video. Moreover, a video delivery method based on cloud technologies and HTML5 is suggested to be used in parallel with standalone applications.

Induction practices : experiences of newly qualified teachers

The thesis consists of four studies (articles I–IV) and a comprehensive summary. The aim is to deepen understanding and knowledge of newly qualified teachers’ experiences of their induction practices. The research interest thus reflects the ambition to strengthen the research-based platform for support measures. The aim can be specified in the following four sub-areas: to scrutinise NQTs’ experiences of the profession in the transition from education to work (study I), to describe and analyse NQTs’ experiences of their first encounters with school and classroom (study II), to explore NQTs’ experiences of their relationships within the school community (study III), to view NQTs’ experiences of support through peer-group mentoring as part of the wider aim of collaboration and assessment (study IV). The overall theoretical perspective constitutes teachers’ professional development. Induction forms an essential part of this continuum and can primarily be seen as a socialisation process into the profession and the social working environment of schools, as a unique phase of teachers’ development contributing to certain experiences, and as a formal programme designed to support new teachers. These lines of research are initiated in the separate studies (I–IV) and deepened in the theoretical part of the comprehensive summary. In order to appropriately understand induction as a specific practice the lines of research are in the end united and discussed with help of practice theory. More precisely the theory of practice architectures, including semantic space, physical space-time and social space, are used. The methodological approach to integrating the four studies is above all represented by abduction and meta-synthesis. Data has been collected through a questionnaire survey, with mainly open-ended questions, and altogether ten focus group meetings with newly qualified primary school teachers in 2007–2008. The teachers (n=88 in questionnaire, n=17 in focus groups), had between one and three years of teaching experience. Qualitative content analysis and narrative analysis were used when analysing the data. What is then the collected picture of induction or the first years in the profession if scrutinising the results presented in the articles? Four dimensions seem especially to permeate the studies and emerge when they are put together. The first dimension, the relational ˗ emotional, captures the social nature of induction and teacher’s work and the emotional character intimately intertwined. The second dimension, the tensional ˗ mutable, illustrates the intense pace of induction, together with the diffuse and unclear character of a teacher’s job. The third dimension, the instructive ˗ developmental, depicts induction as a unique and intensive phase of learning, maturity and professional development. Finally, the fourth dimension, the reciprocal ˗ professional, stresses the importance of reciprocity and collaboration in induction, both formally and informally. The outlined four dimensions, or integration of results, describing induction from the experiences of new teachers, constitute part of a new synthesis, induction practice. This synthesis was generated from viewing the integrated results through the theoretical lens of practice architecture and the three spaces, semantic space, physical space-time and social space. In this way, a more comprehensive, refined and partially new architecture of teachers’ induction practices are presented and discussed.

Novel Methods for Error Modeling and Parameter Identification of a Redundant Serial-Parallel Hybrid Robot

To obtain the desirable accuracy of a robot, there are two techniques available. The first option would be to make the robot match the nominal mathematic model. In other words, the manufacturing and assembling tolerances of every part would be extremely tight so that all of the various parameters would match the “design” or “nominal” values as closely as possible. This method can satisfy most of the accuracy requirements， but the cost would increase dramatically as the accuracy requirement increases. Alternatively, a more cost-effective solution is to build a manipulator with relaxed manufacturing and assembling tolerances. By modifying the mathematical model in the controller, the actual errors of the robot can be compensated. This is the essence of robot calibration. Simply put, robot calibration is the process of defining an appropriate error model and then identifying the various parameter errors that make the error model match the robot as closely as possible. This work focuses on kinematic calibration of a 10 degree-of-freedom (DOF) redundant serial-parallel hybrid robot. The robot consists of a 4-DOF serial mechanism and a 6-DOF hexapod parallel manipulator. The redundant 4-DOF serial structure is used to enlarge workspace and the 6-DOF hexapod manipulator is used to provide high load capabilities and stiffness for the whole structure. The main objective of the study is to develop a suitable calibration method to improve the accuracy of the redundant serial-parallel hybrid robot. To this end, a Denavit–Hartenberg (DH) hybrid error model and a Product-of-Exponential (POE) error model are developed for error modeling of the proposed robot. Furthermore, two kinds of global optimization methods, i.e. the differential-evolution (DE) algorithm and the Markov Chain Monte Carlo (MCMC) algorithm, are employed to identify the parameter errors of the derived error model. A measurement method based on a 3-2-1 wire-based pose estimation system is proposed and implemented in a Solidworks environment to simulate the real experimental validations. Numerical simulations and Solidworks prototype-model validations are carried out on the hybrid robot to verify the effectiveness, accuracy and robustness of the calibration algorithms.

The Application of Enterprise Architecture Approach to Military Concept Development–Case Study

Abstract—Concept development and experimentation (CD&E) plays an important role in driving strategic transformation in the military community. Defence architecture frameworks, such as the NATO architecture framework, are considered excellent means to support CD&E. There is not much empirical evidence, however, to indicate how enterprise architectures (EA) are applied in the military community or particularly in military CD&E. Consequently, this paper describes and discusses empirical application of the EA approach in CD&E. The research method in the paper is a case study. Situational method engineering (SiME) is used as a framework to adapt the EA approach to the case project of the paper. The findings of the paper suggest that the EA is applicable to CD&E work, although all aspects of the original concept could not be expressed in the EA model of the case project. The results also show that the SiME method can support in applying the EA framework to the CD&E in the case project.