Element speciation and behaviour in metal-rich Boreal river and estuarine systems using ultrafiltration and chemical modelling

The bioavailability of metals and their potential for environmental pollution depends not simply on total concentrations, but is to a great extent determined by their chemical form. Consequently, knowledge of aqueous metal species is essential in investigating potential metal toxicity and mobility. The overall aim of this thesis is, thus, to determine the species of major and trace elements and the size distribution among the different forms (e.g. ions, molecules and mineral particles) in selected metal-enriched Boreal river and estuarine systems by utilising filtration techniques and geochemical modelling. On the basis of the spatial physicochemical patterns found, the fractionation and complexation processes of elements (mainly related to input of humic matter and pH-change) were examined. Dissolved (<1 kDa), colloidal (1 kDa-0.45 μm) and particulate (>0.45 μm) size fractions of sulfate, organic carbon (OC) and 44 metals/metalloids were investigated in the extremely acidic Vörå River system and its estuary in W Finland, and in four river systems in SW Finland (Sirppujoki, Laajoki, Mynäjoki and Paimionjoki), largely affected by soil erosion and acid sulfate (AS) soils. In addition, geochemical modelling was used to predict the formation of free ions and complexes in these investigated waters. One of the most important findings of this study is that the very large amounts of metals known to be released from AS soils (including Al, Ca, Cd, Co, Cu, Mg, Mn, Na, Ni, Si, U and the lanthanoids) occur and can prevail mainly in toxic forms throughout acidic river systems; as free ions and/or sulfate-complexes. This has serious effects on the biota and especially dissolved Al is expected to have acute effects on fish and other organisms, but also other potentially toxic dissolved elements (e.g. Cd, Cu, Mn and Ni) can have fatal effects on the biota in these environments. In upstream areas that are generally relatively forested (higher pH and contents of OC) fewer bioavailable elements (including Al, Cu, Ni and U) may be found due to complexation with the more abundantly occurring colloidal OC. In the rivers in SW Finland total metal concentrations were relatively high, but most of the elements occurred largely in a colloidal or particulate form and even elements expected to be very soluble (Ca, K, Mg, Na and Sr) occurred to a large extent in colloidal form. According to geochemical modelling, these patterns may only to a limited extent be explained by in-stream metal complexation/adsorption. Instead there were strong indications that the high metal concentrations and dominant solid fractions were largely caused by erosion of metal bearing phyllosilicates. A strong influence of AS soils, known to exist in the catchment, could be clearly distinguished in the Sirppujoki River as it had very high concentrations of a metal sequence typical of AS soils in a dissolved form (Ba, Br, Ca, Cd, Co, K, Mg, Mn, Na, Ni, Rb and Sr). In the Paimionjoki River, metal concentrations (including Ba, Cs, Fe, Hf, Pb, Rb, Si, Th, Ti, Tl and V; not typical of AS soils in the area) were high, but it was found that the main cause of this was erosion of metal bearing phyllosilicates and thus these metals occurred dominantly in less toxic colloidal and particulate fractions. In the two nearby rivers (Laajoki and Mynäjoki) there was influence of AS soils, but it was largely masked by eroded phyllosilicates. Consequently, rivers draining clay plains sensitive to erosion, like those in SW Finland, have generally high background metal concentrations due to erosion. Thus, relying on only semi-dissolved (<0.45 μm) concentrations obtained in routine monitoring, or geochemical modelling based on such data, can lead to a great overestimation of the water toxicity in this environment. The potentially toxic elements that are of concern in AS soil areas will ultimately be precipitated in the recipient estuary or sea, where the acidic metalrich river water will gradually be diluted/neutralised with brackish seawater. Along such a rising pH gradient Al, Cu and U will precipitate first together with organic matter closest to the river mouth. Manganese is relatively persistent in solution and, thus, precipitates further down the estuary as Mn oxides together with elements such as Ba, Cd, Co, Cu and Ni. Iron oxides, on the contrary, are not important scavengers of metals in the estuary, they are predicted to be associated only with As and PO4.

Paper for printed electronics and functionality

Mass-produced paper electronics (large area organic printed electronics on paper-based substrates, “throw-away electronics”) has the potential to introduce the use of flexible electronic applications in everyday life. While paper manufacturing and printing have a long history, they were not developed with electronic applications in mind. Modifications to paper substrates and printing processes are required in order to obtain working electronic devices. This should be done while maintaining the high throughput of conventional printing techniques and the low cost and recyclability of paper. An understanding of the interactions between the functional materials, the printing process and the substrate are required for successful manufacturing of advanced devices on paper. Based on the understanding, a recyclable, multilayer-coated paper-based substrate that combines adequate barrier and printability properties for printed electronics and sensor applications was developed in this work. In this multilayer structure, a thin top-coating consisting of mineral pigments is coated on top of a dispersion-coated barrier layer. The top-coating provides well-controlled sorption properties through controlled thickness and porosity, thus enabling optimizing the printability of functional materials. The penetration of ink solvents and functional materials stops at the barrier layer, which not only improves the performance of the functional material but also eliminates potential fiber swelling and de-bonding that can occur when the solvents are allowed to penetrate into the base paper. The multi-layer coated paper under consideration in the current work consists of a pre-coating and a smoothing layer on which the barrier layer is deposited. Coated fine paper may also be used directly as basepaper, ensuring a smooth base for the barrier layer. The top layer is thin and smooth consisting of mineral pigments such as kaolin, precipitated calcium carbonate, silica or blends of these. All the materials in the coating structure have been chosen in order to maintain the recyclability and sustainability of the substrate. The substrate can be coated in steps, sequentially layer by layer, which requires detailed understanding and tuning of the wetting properties and topography of the barrier layer versus the surface tension of the top-coating. A cost competitive method for industrial scale production is the curtain coating technique allowing extremely thin top-coatings to be applied simultaneously with a closed and sealed barrier layer. The understanding of the interactions between functional materials formulated and applied on paper as inks, makes it possible to create a paper-based substrate that can be used to manufacture printed electronics-based devices and sensors on paper. The multitude of functional materials and their complex interactions make it challenging to draw general conclusions in this topic area. Inevitably, the results become partially specific to the device chosen and the materials needed in its manufacturing. Based on the results, it is clear that for inks based on dissolved or small size functional materials, a barrier layer is beneficial and ensures the functionality of the printed material in a device. The required active barrier life time depends on the solvents or analytes used and their volatility. High aspect ratio mineral pigments, which create tortuous pathways and physical barriers within the barrier layer limit the penetration of solvents used in functional inks. The surface pore volume and pore size can be optimized for a given printing process and ink through a choice of pigment type and coating layer thickness. However, when manufacturing multilayer functional devices, such as transistors, which consist of several printed layers, compromises have to be made. E.g., while a thick and porous top-coating is preferable for printing of source and drain electrodes with a silver particle ink, a thinner and less absorbing surface is required to form a functional semiconducting layer. With the multilayer coating structure concept developed in this work, it was possible to make the paper substrate suitable for printed functionality. The possibility of printing functional devices, such as transistors, sensors and pixels in a roll-to-roll process on paper is demonstrated which may enable introducing paper for use in disposable “onetime use” or “throwaway” electronics and sensors, such as lab-on-strip devices for various analyses, consumer packages equipped with product quality sensors or remote tracking devices.

Balancing creativity and risk intelligence in professional knowledge-intensive business services

The main strengths of professional knowledge-intensive business services (P-KIBS) are knowledge and creativity which needs to be fostered, maintained and supported. The process of managing P-KIBS companies deals with financial, operational and strategic risks. That is why it is reasonable to apply risk management techniques and frameworks in this context. A significant challenge hides in choosing reasonable ways of implementing risk management, which will not limit creative ability in organization, and furthermore will contribute to the process. This choice is related to a risk intelligent approach which becomes a justified way of finding the required balance. On a theoretical level the field of managing both creativity and risk intelligence as a balanced process remains understudied in particular within KIBS industry. For instance, there appears to be a wide range of separate models for innovation and risk management, but very little discussion in terms of trying to find the right balance between them. This study aims to shed light on the importance of well-managed combination of these concepts. The research purpose of the present study is to find out how the balance between creativity and risk intelligence can be managed in P-KIBS. The methodological approach utilized in the study is strictly conceptual without empirical aspects. The research purpose can be achieved through answering the following research supporting questions: 1. What are the characteristics and role of creativity as a component of innovation process in a P-KIBS company? 2. What are the characteristics and role of risk intelligence as an approach towards risk management process implementation in a P-KIBS company? 3. How can risk intelligence and creativity be balanced in P-KIBS? The main theoretical contribution of the study conceals in a proposed creativity and risk intelligence stage process framework. It is designed as an algorithm that can be applied on organizational canvas. It consists of several distinct stages specified by actors involved, their roles and implications. Additional stage-wise description provides detailed tasks for each of the enterprise levels, while combining strategies into one. The insights driven from the framework can be utilized by a vast range of specialists from strategists to risk managers, and from innovation managers to entrepreneurs. Any business that is designing and delivering knowledge service can potentially gain valuable thoughts and expand conceptual understanding from the present report. Risk intelligence in the current study is a unique way of emphasizing the role of creativity in professional knowledge-intensive industry and a worthy technique for making profound decisions towards risks.

Alterations in The States and Contents of Consciousness: Empirical and Theoretical Aspects

The main purpose of the present doctoral thesis is to investigate subjective experiences and cognitive processes in four different types of altered states of consciousness: naturally occurring dreaming, cognitively induced hypnosis, pharmacologically induced sedation, and pathological psychosis. Both empirical and theoretical research is carried out, resulting in four empirical and four theoretical studies. The thesis begins with a review of the main concepts used in consciousness research, the most influential philosophical and neurobiological theories of subjective experience, the classification of altered states of consciousness, and the main empirical methods used to study consciousness alterations. Next, findings of the original studies are discussed, as follows. Phenomenal consciousness is found to be dissociable from responsiveness, as subjective experiences do occur in unresponsive states, including anaesthetic-induced sedation and natural sleep, as demonstrated by post-awakening subjective reports. Two new tools for the content analysis of subjective experiences and dreams are presented, focusing on the diversity, complexity and dynamics of phenomenal consciousness. In addition, a new experimental paradigm of serial awakenings from non-rapid eye movement sleep is introduced, which enables more rapid sampling of dream reports than has been available in previous studies. It is also suggested that lucid dreaming can be studied using transcranial brain stimulation techniques and systematic analysis of pre-lucid dreaming. For blind judges, dreams of psychotic patients appear to be indistinguishable from waking mentation reports collected from the same patients, which indicates a close resemblance of these states of mind. However, despite phenomenological similarities, dreaming should not be treated as a uniform research model of psychotic or intact consciousness. Contrary to this, there seems to be a multiplicity of routes of how different states of consciousness can be associated. For instance, seemingly identical time perception distortions in different alterations of consciousness may have diverse underlying causes for these distortions. It is also shown that altered states do not necessarily exhibit impaired cognitive processing compared to a baseline waking state of consciousness: a case study of time perception in a hypnotic virtuoso indicates a more consistent perceptual timing under hypnosis than in a waking state. The thesis ends with a brief discussion of the most promising new perspectives for the study of alterations of consciousness.

Anaesthesia and Pain Management for Use in Orthopaedic Day Surgery

Day surgery has gained a large popularity during the last decades. In Finland, 57% of the elective procedures, and 50% at Turku University Hospital, were already conducted on day basis during 2012. The steady growth of day surgery is mostly due to an increased safety in perioperative care and cost-effectiveness. The development of surgical techniques and anaesthetic methods has advanced the modern day surgery and extended the repertory of the procedures for use in day surgery operations. Day surgery also offers certain benefits like reduced risk for hospital-related infections, stress and confusion. Patient satisfaction, regarding several issues, is high. Most concerns and complaints are related to postoperative pain, nausea and vomiting pain and nausea. Pain can hamper recovery and pain management is a crucial factor for hospital discharge. Appropriate pain treatment is effective, safe, easy and economical. A procedure-specific approach and an individually planned, multimodal analgesia should be the basis of modern pain management. The main aim of this thesis was to evaluate the effectiveness and safety of anaesthetic technique and methods in pain treatment of orthopaedic day case surgery, and following conclusions were made. Unilateral spinal block was achieved using hyperbaric bupivacaine with a small dose of clonidine but clonidine prolonged the block. Continuous subacromial bupivacaine was found to be safe but conferring only moderate efficacy in pain care after shoulder arthroscopy. Transdermal fentanyl, 12 g/h, as part of multimodal analgesia, offered a safe and easy option to pain management in this patient group. However, after forefoot surgery, it did not reduce pain any further. In general, pain scores in all patient groups were low and the need for rescue opioid moderate.

e-Business and collaboration: A case study of pulp supply chain

This thesis studies how the case company could digitalize its supply chain and what kind of advantages this would create in the light of supply chain efficiency. The case company manufactures several pulp products that are used for paper, fabrics and packaging products by customers worldwide. The paper and pulp industry has been paying more and more attention to increasing supply chain efficiency with new operating and service models made possible by today’s information technology. The main focus of this study is on the supply chain between the case company and its key customers and the goal is to find ways to make the operations between them as efficient as possible. The study relays heavily on collaboration techniques and digitalization technologies. In addition to a theoretical framework, the study includes several empirical studies that offer real-life examples of how these theories and technologies are applied in operating environments similar to the case company. A plan with strategic and operational levels is created according to the findings of the previous sections to support the case company’s future operations. The plan is based on an RFID-supported collaboration model that aims to advance information sharing between the supply chain partners. The time for an RFID-investment is sought to be very optimal and the benefits of such system to be noteworthy, but challenging to measure in monetary terms.

Fluvio-morphological processes of meander bends - Combining conventional field measurements, close-range remote sensing and computational modelling

Meandering rivers have been perceived to evolve rather similarly around the world independently of the location or size of the river. Despite the many consistent processes and characteristics they have also been noted to show complex and unique sets of fluviomorphological processes in which local factors play important role. These complex interactions of flow and morphology affect notably the development of the river. Comprehensive and fundamental field, flume and theoretically based studies of fluviomorphological processes in meandering rivers have been carried out especially during the latter part of the 20th century. However, as these studies have been carried out with traditional field measurements techniques their spatial and temporal resolution is not competitive to the level achievable today. The hypothesis of this study is that, by exploiting e increased spatial and temporal resolution of the data, achieved by combining conventional field measurements with a range of modern technologies, will provide new insights to the spatial patterns of the flow-sediment interaction in meandering streams, which have perceived to show notable variation in space and time. This thesis shows how the modern technologies can be combined to derive very high spatial and temporal resolution data on fluvio-morphological processes over meander bends. The flow structure over the bends is recorded in situ using acoustic Doppler current profiler (ADCP) and the spatial and temporal resolution of the flow data is enhanced using 2D and 3D CFD over various meander bends. The CFD are also exploited to simulate sediment transport. Multi-temporal terrestrial laser scanning (TLS), mobile laser scanning (MLS) and echo sounding data are used to measure the flow-based changes and formations over meander bends and to build the computational models. The spatial patterns of erosion and deposition over meander bends are analysed relative to the measured and modelled flow field and sediment transport. The results are compared with the classic theories of the processes in meander bends. Mainly, the results of this study follow well the existing theories and results of previous studies. However, some new insights regarding to the spatial and temporal patterns of the flow-sediment interaction in a natural sand-bed meander bend are provided. The results of this study show the advantages of the rapid and detailed measurements techniques and the achieved spatial and temporal resolution provided by CFD, unachievable with field measurements. The thesis also discusses the limitations which remain in the measurement and modelling methods and in understanding of fluvial geomorphology of meander bends. Further, the hydro- and morphodynamic models’ sensitivity to user-defined parameters is tested, and the modelling results are assessed against detailed field measurement. The study is implemented in the meandering sub-Arctic Pulmanki River in Finland. The river is unregulated and sand-bed and major morphological changes occur annually on the meander point bars, which are inundated only during the snow-melt-induced spring floods. The outcome of this study applies to sandbed meandering rivers in regions where normally one significant flood event occurs annually, such as Arctic areas with snow-melt induced spring floods, and where the point bars of the meander bends are inundated only during the flood events.

Novel Interaction Techniques for Mobile Augmented Reality applications. A Systematic Literature Review

This study reviews the research on interaction techniques and methods that could be applied in mobile augmented reality scenarios. The review is focused on themost recent advances and considers especially the use of head-mounted displays. Inthe review process, we have followed a systematic approach, which makes the reviewtransparent, repeatable, and less prone to human errors than if it was conducted in amore traditional manner. The main research subjects covered in the review are headorientation and gaze-tracking, gestures and body part-tracking, and multimodality– as far as the subjects are related to human-computer interaction. Besides these,also a number of other areas of interest will be discussed.

Collectiveness within startup teams – Leading the way to initiating and managing collective pursuit of opportunities in organizational contexts

While traditional entrepreneurship literature addresses the pursuit of entrepreneurial opportunities to a solo entrepreneur, scholars increasingly agree that new ventures are often founded and operated by entrepreneurial teams as collective efforts especially in hightechnology industries. Researchers also suggest that team ventures are more likely to survive and succeed than ventures founded by the individual entrepreneur although specific challenges might relate to multiple individuals being involved in joint entrepreneurial action. In addition to new ventures, entrepreneurial teams are seen central for organizing work in established organizations since the teams are able to create major product and service innovations that drive organizational success. Acknowledgement of the entrepreneurial teams in various organizational contexts has challenged the notion on the individual entrepreneur. However, considering that entrepreneurial teams represent a collective-level phenomenon that bases on interactions between organizational members, entrepreneurial teams may not have been studied as indepth as could be expected from the point of view of the team-level, rather than the individual or the individuals in the team. Many entrepreneurial team studies adopt the individualized view of entrepreneurship and examine the team members’ aggregate characteristics or the role of a lead entrepreneur. The previous understandings might not offer a comprehensive and indepth enough understanding of collectiveness within entrepreneurial teams and team venture performance that often relates to the team-level issues in particular. In addition, as the collective-level of entrepreneurial teams has been approached in various ways in the existing literatures, the phenomenon has been difficult to understand in research and practice. Hence, there is a need to understand entrepreneurial teams at the collective-level through a systematic and comprehensive perspective. This study takes part in the discussions on entrepreneurial teams. The overall objective of this study is to offer a description and understanding of collectiveness within entrepreneurial teams beyond individual(s). The research questions of the study are: 1) what collectiveness within entrepreneurial teams stands for, what constitutes the basic elements of it, and who are included in it, 2) why, how, and when collectiveness emerges or reinforces within entrepreneurial teams, and 3) why collectiveness within entrepreneurial teams matters and how it could be developed or supported. In order to answer the above questions, this study bases on three approaches, two set of empirical data, two analysis techniques, and conceptual study. The first data set consists of 12 qualitative semi-structured interviews with business school students who are seen as prospective entrepreneurs. The data is approached through a social constructionist perspective and analyzed through discourse analysis. The second data set bases on a qualitative multiplecase study approach that aims at theory elaboration. The main data consists of 14 individual and four group semi-structured thematic interviews with members of core entrepreneurial teams of four team startups in high-technology industries. The secondary data includes publicly available documents. This data set is approached through a critical realist perspective and analyzed through systematic thematic analysis. The study is completed through a conceptual study that aims at building a theoretical model of collective-level entrepreneurship drawing from existing literatures on organizational theory and social-psychology. The theoretical work applies a positivist perspective. This study consists of two parts. The first part includes an overview that introduces the research background, knowledge gaps and objectives, research strategy, and key concepts. It also outlines the existing knowledge of entrepreneurial team literature, presents and justifies the choices of paradigms and methods, summarizes the publications, and synthesizes the findings through answering the above mentioned research questions. The second part consists of five publications that address independent research questions but all enable to answer the research questions set for this study as a whole. The findings of this study suggest a map of relevant concepts and their relationships that help grasp collectiveness within entrepreneurial teams. The analyses conducted in the publications suggest that collectiveness within entrepreneurial teams stands for cognitive and affective structures in-between team members including elements of collective entity, collective idea of business, collective effort, collective attitudes and motivations, and collective feelings. Collectiveness within entrepreneurial teams also stands for specific joint entrepreneurial action components in which the structures are constructed. The action components reflect equality and democracy, and open and direct communication in particular. Collectiveness emerges because it is a powerful tool for overcoming individualized barriers to entrepreneurship and due to collectively oriented desire for, collective value orientation to, demand for, and encouragement to team entrepreneurship. Collectiveness emerges and reinforces in processes of joint creation and realization of entrepreneurial opportunities including joint analysis and planning of the opportunities and strategies, decision-making and realization of the opportunities, and evaluation, feedback, and sanctions of entrepreneurial action. Collectiveness matters because it is relevant for potential future entrepreneurs and because it affects the ways collective ventures are initiated and managed. Collectiveness also matters because it is a versatile, dynamic, and malleable phenomenon and the ideas of it can be applied across organizational contexts that require team work in discovering or creating and realizing new opportunities. This study further discusses how the findings add to the existing knowledge of entrepreneurial team literature and how the ideas can be applied in educational, managerial, and policy contexts.