Effects of modern variable frequency drive on the reliability of an old crane induction motor

The work aims to analyze the possibilities of utilizing old crane driving AC induction motors in modern pulse-width-modulated variable frequency drives. Bearing currents and voltage stresses are the two main problems associated with modern IGBT inverters, and they may cause premature failure of an old induction motor. The origins of these two problems are studied. An analysis of the mechanism of bearing failure is proposed. Certain types of bearing currents are considered in detail. The most effective and economical means are chosen for bearing currents mitigation. Transient phenomena of cables and mechanism of over voltages occurring at motor terminals are studied in the work. The weakest places of the stator winding insulation system are shown and recommendations are given considering the mitigation of voltage stresses. Only the most appropriate and cost effective preventative methods are chosen for old motor drives. Rewinding of old motors is also considered.

On Commutation and Conjugacy of Rational Languages and the Fixed Point Method

The research on language equations has been active during last decades. Compared to the equations on words the equations on languages are much more difficult to solve. Even very simple equations that are easy to solve for words can be very hard for languages. In this thesis we study two of such equations, namely commutation and conjugacy equations. We study these equations on some limited special cases and compare some of these results to the solutions of corresponding equations on words. For both equations we study the maximal solutions, the centralizer and the conjugator. We present a fixed point method that we can use to search these maximal solutions and analyze the reasons why this method is not successful for all languages. We give also several examples to illustrate the behaviour of this method.

Modern recovery boiler design criteria

Engineering and pricing of large recovery boiler were studied in this work. Engineering was carried out with Anita 4.2 which is an engineering program of Andritz. Key initial values were chosen with previous studies. Primary target of this work was to find out the consequences that furnace dimensions and furnace screen vertical part has to boiler pricing. Boilers that were engineered had different rate of furnace width and depth and different heat transfer plate count. Boiler balances were invariable. Boilers with different vertical screen construction were also calculated. First variation was boiler with vertical screen up to furnace roof. Other variation was to connect vertical screen to Pre-boiler generating bank inlet tubes. Total prices were calculated to engineered boilers. Pricing was sort out to heat transfers, high pressure pipes, steel structures, auxiliary equipments and civil/structural costs. This study did not notice parts of the boiler which costs do not vary with the construction of the boiler. Heat transfers had the largest share of costs. Boiler building had the most significant differences between the boilers. Furnace screen had also significant role especially to costs of the boiler building.

Modern kontrapunkt

Jätetty pois Melartinin käsikirjoitusluettelosta.

Formal Power Analysis of Systems-on-Chip

The design methods and languages targeted to modern System-on-Chip designs are facing tremendous pressure of the ever-increasing complexity, power, and speed requirements. To estimate any of these three metrics, there is a trade-off between accuracy and abstraction level of detail in which a system under design is analyzed. The more detailed the description, the more accurate the simulation will be, but, on the other hand, the more time consuming it will be. Moreover, a designer wants to make decisions as early as possible in the design flow to avoid costly design backtracking. To answer the challenges posed upon System-on-chip designs, this thesis introduces a formal, power aware framework, its development methods, and methods to constraint and analyze power consumption of the system under design. This thesis discusses on power analysis of synchronous and asynchronous systems not forgetting the communication aspects of these systems. The presented framework is built upon the Timed Action System formalism, which offer an environment to analyze and constraint the functional and temporal behavior of the system at high abstraction level. Furthermore, due to the complexity of System-on-Chip designs, the possibility to abstract unnecessary implementation details at higher abstraction levels is an essential part of the introduced design framework. With the encapsulation and abstraction techniques incorporated with the procedure based communication allows a designer to use the presented power aware framework in modeling these large scale systems. The introduced techniques also enable one to subdivide the development of communication and computation into own tasks. This property is taken into account in the power analysis part as well. Furthermore, the presented framework is developed in a way that it can be used throughout the design project. In other words, a designer is able to model and analyze systems from an abstract specification down to an implementable specification.

Electric propulsion system in a modern sports car

In this thesis an electric propulsion system is designed on a device level using Cadence ORCAD. The vehicle belongs to the Helsinki Metropolia University of Applied Sci-ences and it is to compete in the Automotive X-Prize competition held in the USA. In this thesis the electric propulsion system and related electric safety measures are designed. Also electro-magnetic compatibility and interferences present in the system are examined by examining the birth mechanisms and transmission paths of interference. Per device effects of interference and solutions to minimize them were examined and proposed. Suitability of permanent magnet synchronous machines for passenger vehicle use was examined by examining the torque production capability of the motor and the torque requirements of the vehicle. Also a short overview of history of electric vehicles is given.

Mikael Agricolan teosten kielen ala-, ylä-, ja -pää-vartaloiset adpositiot

Adpositions with the stems ala, ylä and pää in the language of Mikael Agricola’s writings The language of Mikael Agricola’s (c 1510–1557) writings represents an interesting phase in the development of the Finnish system for adpositions. In the Finnish language, the older Uralic system of postpositions has undergone expansion and a new system of prepositions has been adopted. On the other hand, the adposition system found in Agricola’s writings has also been strongly affected by foreign models, because Agricola’s texts are mainly translations of religious texts, which by and large use a word-for-word translation strategy. In the thesis, I explore Agricola’s use of adpositions; more specifically, which adpositions carry the meaning of ‘being under’ or ‘being over’ something, and in what other functions these adpositions are used. My main focus is on the semantics of the adpositions. I also study the syntactic features of adpositions and adposition structures; these are intertwined with semantics, since the meaning of adpositions is established in the adposition clause. Finally, I compare Agricola’s use of adpositions to the corresponding adpositions of present-day Finnish. Adpositions with stems ala, ylä and pää form an interesting subject for research. Their frequency in the data, however, is highly uneven. The overwhelming majority of the adpositions studied in the thesis are päälle; there are only two occurrences of adpositions with the stem ylä. Adpositions typically denote a location ‘under’ or ‘above’ something. Almost half of the adpositions, however, can be classified as semantically unmotivated and as representing a foreign model in terms of the Finnish language; they do not occur in present-day Finnish. In Agricola’s texts they act in more grammatical roles than the corresponding adpositions of present-day Finnish. In the thesis, the corresponding adpositions in the source languages are carefully analysed. All other uses of the adpositions are marginal in relation to spatial ones and those based on foreign models. The original meanings of the adpositions have not changed much since Agricola, but adpositions considered to originate from foreign models have been intentionally eliminated in presentday standard Finnish. It is also noteworthy that the system of adpositions with the stems ala, ylä and pää has changed since Agricola. His texts include the adposition ala, which corresponds to the modern adposition alle. Likewise the adposition yllä is absent in Agricola, as are the internal locative cases of the adposition pää.

Kielikylpydidaktiikkaa kehittämässä : 3-6-vuotiaiden kielikylpylasten kielellinen kehitys ja kielikylpydidaktiikan kehittäminen päiväkodissa

The goal of this study is to determine the naming ability in Finnish and Swedish of nursery school-aged children participating in a language immersion programme, as well as their command of both languages. The study also aims to describe factors reflecting language immersion teaching in nursery schools based on action research and a literature survey. The longitudinal study, conducted in 2003–2005, comprised 133 native Finnish three- to six-year-old children in language immersion programmes. A total of four measurements were carried out over two and a half years. In each measurement, four separate tests were given to each child (totally 1134 measurements). Research material was collected using survey tools that measured the children’s naming ability and command of language. The tools had been translated into both Finnish and Swedish. The material also includes taped responses related to the tool for naming ability. Didactic approaches were developed on the basis of material from action research and the literature survey. The material was examined using methodological triangulation, and a quantitative analysis was made of each survey tool. Furthermore, a content analysis of the children’s taped responses gave further depth to the description of language development. The theoretical framework of the study is mainly based on modern sociocultural theories of second language development and acquisition. Thus, the approach is both linguistic and pedagogic, with emphasis lying on the latter. The socioculturally-oriented framework of this study is mainly influenced by the theorists Vygotski, Spolsky, van Lier and Cummins. According to the results, the language skills of children in language immersion programmes develop as expected from age three to six in the fields studied. In the field of language command, the children acquired excellent skills in listening comprehension. Their naming ability was not as good. In each test, the children showed weaker skills in Swedish than in Finnish. However, based on the assumption that the two languages have a shared cognitive field, the skills in Swedish catch up with the skills in Finnish at an annual rate of 6–7 per cent. The study indicates that children meet a language development threshold one year earlier in their native language than they do in the immersion language. As for the naming ability in Swedish, problems arose from the fact that the deviation in results increases with age. Children showed creativity in their use of naming strategies. Judging by the research results, children begin to use the immersion language as a tool for thought at a very early phase. The research results, action research and literature survey were also used to create a general educational model for language immersion.

Equivalence and translation strategies in multilingual thesaurus construction

In the present dissertation, multilingual thesauri were approached as cultural products and the focus was twofold: On the empirical level the focus was placed on the translatability of certain British-English social science indexing terms into the Finnish language and culture at a concept, a term and an indexing term level. On the theoretical level the focus was placed on the aim of translation and on the concept of equivalence. In accordance with modern communicative and dynamic translation theories the interest was on the human dimension. The study is qualitative. In this study, equivalence was understood in a similar way to how dynamic, functional equivalence is commonly understood in translation studies. Translating was seen as a decision-making process, where a translator often has different kinds of possibilities to choose in order to fulfil the function of the translation. Accordingly, and as a starting point for the construction of the empirical part, the function of the source text was considered to be the same or similar to the function of the target text, that is, a functional thesaurus both in source and target context. Further, the study approached the challenges of multilingual thesaurus construction from the perspectives of semantics and pragmatics. In semantic analysis the focus was on what the words conventionally mean and in pragmatics on the ‘invisible’ meaning - or how we recognise what is meant even when it is not actually said (or written). Languages and ideas expressed by languages are created mainly in accordance with expressional needs of the surrounding culture and thesauri were considered to reflect several subcultures and consequently the discourses which represent them. The research material consisted of different kinds of potential discourses: dictionaries, database records, and thesauri, Finnish versus British social science researches, Finnish versus British indexers, simulated indexing tasks with five articles and Finnish versus British thesaurus constructors. In practice, the professional background of the two last mentioned groups was rather similar. It became even more clear that all the material types had their own characteristics, although naturally not entirely separate from each other. It is further noteworthy that the different types and origins of research material were not used to represent true comparison pairs, and that the aim of triangulation of methods and material was to gain a holistic view. The general research questions were: 1. Can differences be found between Finnish and British discourses regarding family roles as thesaurus terms, and if so, what kinds of differences and which are the implications for multilingual thesaurus construction? 2. What is the pragmatic indexing term equivalence? The first question studied how the same topic (family roles) was represented in different contexts and by different users, and further focused on how the possible differences were handled in multilingual thesaurus construction. The second question was based on findings of the previous one, and answered to the final question as to what kinds of factors should be considered when defining translation equivalence in multilingual thesaurus construction. The study used multiple cases and several data collection and analysis methods aiming at theoretical replication and complementarity. The empirical material and analysis consisted of focused interviews (with Finnish and British social scientists, thesaurus constructors and indexers), simulated indexing tasks with Finnish and British indexers, semantic component analysis of dictionary definitions and translations, coword analysis and datasets retrieved in databases, and discourse analysis of thesauri. As a terminological starting point a topic and case family roles was selected. The results were clear: 1) It was possible to identify different discourses. There also existed subdiscourses. For example within the group of social scientists the orientation to qualitative versus quantitative research had an impact on the way they reacted to the studied words and discourses, and indexers placed more emphasis on the information seekers whereas thesaurus constructors approached the construction problems from a more material based solution. The differences between the different specialist groups i.e. the social scientists, the indexers and the thesaurus constructors were often greater than between the different geo-cultural groups i.e. Finnish versus British. The differences occurred as a result of different translation aims, diverging expectations for multilingual thesauri and variety of practices. For multilingual thesaurus construction this means severe challenges. The clearly ambiguous concept of multilingual thesaurus as well as different construction and translation strategies should be considered more precisely in order to shed light on focus and equivalence types, which are clearly not self-evident. The research also revealed the close connection between the aims of multilingual thesauri and the pragmatic indexing term equivalence. 2) The pragmatic indexing term equivalence is very much context-depended. Although thesaurus term equivalence is defined and standardised in the field of library and information science (LIS), it is not understood in one established way and the current LIS tools are inadequate to provide enough analytical tools for both constructing and studying different kinds of multilingual thesauri as well as their indexing term equivalence. The tools provided in translation science were more practical and theoretical, and especially the division of different meanings of a word provided a useful tool in analysing the pragmatic equivalence, which often differs from the ideal model represented in thesaurus construction literature. The study thus showed that the variety of different discourses should be acknowledged, there is a need for operationalisation of new types of multilingual thesauri, and the factors influencing pragmatic indexing term equivalence should be discussed more precisely than is traditionally done.

Applications of graph transformation in tools for domain-specific modeling languages

The use of domain-specific languages (DSLs) has been proposed as an approach to cost-e ectively develop families of software systems in a restricted application domain. Domain-specific languages in combination with the accumulated knowledge and experience of previous implementations, can in turn be used to generate new applications with unique sets of requirements. For this reason, DSLs are considered to be an important approach for software reuse. However, the toolset supporting a particular domain-specific language is also domain-specific and is per definition not reusable. Therefore, creating and maintaining a DSL requires additional resources that could be even larger than the savings associated with using them. As a solution, di erent tool frameworks have been proposed to simplify and reduce the cost of developments of DSLs. Developers of tool support for DSLs need to instantiate, customize or configure the framework for a particular DSL. There are di erent approaches for this. An approach is to use an application programming interface (API) and to extend the basic framework using an imperative programming language. An example of a tools which is based on this approach is Eclipse GEF. Another approach is to configure the framework using declarative languages that are independent of the underlying framework implementation. We believe this second approach can bring important benefits as this brings focus to specifying what should the tool be like instead of writing a program specifying how the tool achieves this functionality. In this thesis we explore this second approach. We use graph transformation as the basic approach to customize a domain-specific modeling (DSM) tool framework. The contributions of this thesis includes a comparison of di erent approaches for defining, representing and interchanging software modeling languages and models and a tool architecture for an open domain-specific modeling framework that e ciently integrates several model transformation components and visual editors. We also present several specific algorithms and tool components for DSM framework. These include an approach for graph query based on region operators and the star operator and an approach for reconciling models and diagrams after executing model transformation programs. We exemplify our approach with two case studies MICAS and EFCO. In these studies we show how our experimental modeling tool framework has been used to define tool environments for domain-specific languages.