Metal additive manufacturing of internal flow channels with powder bed fusion processes

This thesis studies the advantages, disadvantages and possibilities of additive manufacturing in making components with internal flow channels. These include hydraulic components, components with cooling channels and heat exchangers. Processes studied in this work are selective laser sintering and selective laser melting of metallic materials. The basic principles of processes and parameters involved in the process are presented and different possibilities of internal channel manufacturing and flow improvement are introduced

Organization of the marketing communication activities after fusion - the integration and the decision making processes

This master’s thesis was made in order to gain answers to the question of how the integration of the marketing communications and the decision making related to it in a geographically dispersed service organization could be improved in a situation where an organization has gone through a merger. The effects of the organizational design dimensions towards the integration of the marketing communications and the decision making related to it was the main focus. A case study as a research strategy offered a perfect frames for an exploratory study and the data collection was conducted by semi-structured interviews and observing. The main finding proved that from the chosen design dimensions, decentralization, coordination and power, could be found specific factors that in a geographically dispersed organization are affecting the integration of the marketing communications negatively. The effects can be seen mostly in the decision making processes, roles and in the division of responsibility, which are affecting the other dimensions and by this, the integration. In a post-merger situation, the coordination dimension and especially the information asymmetry and the information flow seem to have a largest affect towards the integration of the marketing communications. An asymmetric information distribution with the lack of business and marketing education resulted in low self-assurance and at the end in fragmented management and to the inability to set targets and make independent decisions. As conclusions it can be stated, that with the organizational design dimensions can the effects of a merger towards the integration process of the marketing communications to be evaluated.

Weldability of powder bed fusion fabricated stainless steel 316L sheets to cold rolled sheet metal

Weldability of powder bed fusion (PBF) fabricated components has come to discussion in past two years due to resent developments in the PBF technology and limited size of the machines used in the fabrication process. This study concentrated on effects of energy input of welding on mechanical properties and microstructural features of welds between PBF fabricated stainless steel 316L sheets and cold rolled sheet metal of same composition by the means of destructive testing and microscopic analysis. Optical fiber diameter, laser power and welding speed were varied during the experiments that were executed following one variable at a time (OVAT) method. One of the problems of welded PBF fabricated components has been lower elongations at break comparing to conventionally manufactured components. Decreasing energy input of the laser keyhole welding decreased elongations at break of the welded specimens. Ultimate tensile strengths were not affected significantly by the energy input of the welding, but fracturing of the specimens welded using high energy input occurred from the weld metal. Fracturing of the lower energy input welds occurred from the PBF fabricated base metal. Energy input was found to be critical factor for mechanical properties of the welds. Multioriented grain growth and formation of neck at fusion zone boundary on the cold rolled side of the weld was detected and suspected to be result from weld pool flows caused by differences in molten weld pool behaviour between the PBF fabricated and cold rolled sides of the welds.

Optimizing counterparty credit risk portfolio by reducing exposure at default variance

Rahoitusyhtiöt pitävät omaa pääomaa taseessa harvinaisen suuria markkinamuutoksia varten ja tämän pääoman määrä on ohjattu valvontaviranomaisten toimesta. Euroopassa Basel akordi antaa suuntaviivat näille säädöksille. 2007 vuoden finanssikriisin jälkeen rahoitusyhtiöt sekä valvojat ovat olleet entistä kiinnostuneempia pääoman riittävyydestä. Tutkimuksia riskistä, säädöksistä ja pääomavaateen madaltamisesta on tehty aikaisemmin, mutta tässä tutkimuksessa keskitytään vaateen jatkuvan muutoksen suuruuteen. Tutkimus sisältää hypoteettisen vastapuoliriski portfolion, jossa on mukana valuuttajohdannaisia. Tätä portfoliota simuloidaan eri tavoin, jotta nähtäisiin kuinka suuri vaikutus portfolion koostumuksella voi olla pääomavaateen varianssiin. Jos tämä muuttuja on merkittävä, pitäisikö rahoitusyhtiöiden yrittää pienentää muutosta, jotta yhtiöiden varapääoman määrää voitaisiin alentaa? Tutkimuksessa on myös haastateltu Suomen johtavia vastapuoliriski asiantuntijoita, jotta nähtäisiin rahoitusalan oma näkemys asian merkittävyydestä. Tutkimusmenetelminä toimivat haastattelut sekä numeerinen analyysi hypoteettisella portfoliolla. Kaupat tähän vastapuoliriski portfolioon on luotu 14 vuoden ajalle ja se sisältää ainoastaan valuuttajohdannaisia viidessä eri valuutassa. Riski lasketaan markkina-arvo menetelmällä, joista lasketaan VaR-mallilla tulevaisuuden riski nettoutuksen kera. Portfolion rakennetta muutetaan simuloinneissa, jotta nähtäisiin vaikutus tulevaisuuden riskeille, joita käytetään edustamaan pääomavaateen määrää ja sen vaihtelua yli ajan. Portfolioiden riskejä lasketaan myös rasituskokeiden avulla, jotta tuloksista saataisiin mahdollisimman todenmukaisia. Analyyttinen osuus tutkimuksesta näyttää sen, että tämän kaltainen optimointi on suuresti riippuvainen alkuperäisestä portfoliosta, jonka määrittää yleisesti rahoitusyhtiön myyntistrategia. Yleisesti ottaen pääomavaateen varianssin muutos voi simuloinneissa olla melko suurta, varsinkin jos mukaan huomioidaan rasitus testit, puuttuvat tuotteet sekä muut pääomavaateen laskentaan huomioitavat seikat. Haastatteluissa saatiin selville millainen optimointi voisi olla mahdollista todellisuudessa. Huomattiin myös että tämän kaltainen ajattelumalli on jo huomattu alalla ennestään. Jon Gregory jopa mainitsi, että jotkin rahoitusyhtiöt ovat enemmän kiinnostuneita muutosten pienentämisestä kuin itse pääomavaateen suuruudesta. Näyttääkin siltä, että tämän aihepiiri vaatisi entistä enemmän tutkimusta, sillä sitä ei ennestään vielä ole, ja rahoitusyhtiöt ovat jo alkaneet etsimään uusia keinoja selvitäkseen rahoitusalalla, joka on yhä entisestään kilpailullisempi.

Fusion of Data from Quadcopter’s Inertial Measurement Unit Using Complementary Filter

A quadcopter is a helicopter with four rotors, which is mechanically simple device, but requires complex electrical control for each motor. Control system needs accurate information about quadcopter’s attitude in order to achieve stable flight. The goal of this bachelor’s thesis was to research how this information could be obtained. Literature review revealed that most of the quadcopters, whose source-code is available, use a complementary filter or some derivative of it to fuse data from a gyroscope, an accelerometer and often also a magnetometer. These sensors combined are called an Inertial Measurement Unit. This thesis focuses on calculating angles from each sensor’s data and fusing these with a complementary filter. On the basis of literature review and measurements using a quadcopter, the proposed filter provides sufficiently accurate attitude data for flight control system. However, a simple complementary filter has one significant drawback – it works reliably only when the quadcopter is hovering or moving at a constant speed. The reason is that an accelerometer can’t be used to measure angles accurately if linear acceleration is present. This problem can be fixed using some derivative of a complementary filter like an adaptive complementary filter or a Kalman filter, which are not covered in this thesis.

Foreign exchange exposure management in a fuel procurement company operating in the commodity markets

Fluctuating commodity prices, foreign exchange rates and interest rates are causing changes in cash flows, market value and the companies’ profit. Most of the commodities are quoted in US dollar. Companies with non-dollar accounting face a double risk in the form of the commodity price risk and foreign exchange risk. The objective of this Master’s thesis is to find out how companies under commodity should manage foreign exchange exposure. The theoretical literature is based on foreign exchange risk, commodity risk and foreign exchange exposure management. The empirical research is done by using constructive modelling of a case company in the oil industry. The exposure is model with foreign exchange net cash flow and net working capital. First, the factors affecting foreign exchange exposure in case company are analyzed, then a model of foreign exchange exposure is created. Finally, the models are compared and the most suitable method is defined. According to the literature, foreign exchange exposure is the foreign exchange net cash flow. However, the results of the study show that foreign exchange risk can be managed also with net working capital. When the purchases, sales and storage are under foreign exchange risk, the best way to manage foreign exchange exposure is with combined net cash flow and net working capital method. The foreign exchange risk policy of the company defines the appropriate way to manage foreign exchange risk.