Mitigation possibilities to Greenhouse gas emissions from power production in India

Global warming is assertively the greatest environmental challenge for humans of 21st century. It is primarily caused by the anthropogenic greenhouse gas (GHG) that trap heat in the atmosphere. Because of which, the GHG emission mitigation, globally, is a critical issue in the political agenda of all high-profile nations. India, like other developing countries, is facing this threat of climate change while dealing with the challenge of sustaining its rapid economic growth. India’s economy is closely connected to its natural resource base and climate sensitive sectors like water, agriculture and forestry. Due to Climate change the quality and distribution of India’s natural resources may transform and lead to adverse effects on livelihood of its people. Therefore, India is expected to face a major threat due to the projected climate change. This study proposes possible solutions for GHG emission mitigation that are specific to the power sector of India. The methods discussed here will take Indian power sector from present coal dominant ideology to a system, centered with renewable energy sources. The study further proposes a future scenario for 2050, based on the present Indian government policies and global energy technologies advancements.

Adaptability, Transformation and Complex Changes in Namibia and Tanzania: Resilience and Innovation System Development in Local Communities

This thesis is a research about the recent complex spatial changes in Namibia and Tanzania and local communities’ capacity to cope with, adapt to and transform the unpredictability engaged to these processes. I scrutinise the concept of resilience and its potential application to explaining the development of local communities in Southern Africa when facing various social, economic and environmental changes. My research is based on three distinct but overlapping research questions: what are the main spatial changes and their impact on the study areas in Namibia and Tanzania? What are the adaptation, transformation and resilience processes of the studied local communities in Namibia and Tanzania? How are innovation systems developed, and what is their impact on the resilience of the studied local communities in Namibia and Tanzania? I use four ethnographic case studies concerning environmental change, global tourism and innovation system development in Namibia and Tanzania, as well as mixed-methodological approaches, to study these issues. The results of my empirical investigation demonstrate that the spatial changes in the localities within Namibia and Tanzania are unique, loose assemblages, a result of the complex, multisided, relational and evolutional development of human and non-human elements that do not necessarily have linear causalities. Several changes co-exist and are interconnected though uncertain and unstructured and, together with the multiple stressors related to poverty, have made communities more vulnerable to different changes. The communities’ adaptation and transformation measures have been mostly reactive, based on contingency and post hoc learning. Despite various anticipation techniques, coping measures, adaptive learning and self-organisation processes occurring in the localities, the local communities are constrained by their uneven power relationships within the larger assemblages. Thus, communities’ own opportunities to increase their resilience are limited without changing the relations in these multiform entities. Therefore, larger cooperation models are needed, like an innovation system, based on the interactions of different actors to foster cooperation, which require collaboration among and input from a diverse set of stakeholders to combine different sources of knowledge, innovation and learning. Accordingly, both Namibia and Tanzania are developing an innovation system as their key policy to foster transformation towards knowledge-based societies. Finally, the development of an innovation system needs novel bottom-up approaches to increase the resilience of local communities and embed it into local communities. Therefore, innovation policies in Namibia have emphasised the role of indigenous knowledge, and Tanzania has established the Living Lab network.

Convergence and divergence in global economy and social development : global perspectives on the contents of economic and soical development policy and its effects on rich and poor countries

The study of convergence and divergence in global economy and social development utilises comparative indicators to investigate the contents of economic and social development policy and their effects on the global samples that represent the rich industrial, semi-industrial and the poor developing nations. The study searchesfor answers to questions such as "what are the objectives of economic growth policies in globalisation under the imperatives of convergence and divergence, and how do these affect human well-being in consideration to the objectives of social policy in various nations?" The empirical verification of data utilises the concepts of the `logic of industrialism´ for comparative analysis that focuses mainly on identifying the levels of well-being in world nations after the Second World War. The perspectives of convergence and divergence in global economy and social development critically examine the stages of early development processes in global economy, distinguish the differences between economy and social development, illustrate the contents of economic and social development policies, their effects on rich and poor countries, and the nature of convergence and divergence in propelling economic growth and unequal social development in world nations. The measurement of convergence and divergence in global economy and social development utilised both economic and social data that were combined into an index that measures the precise levels of the effects of economic and social development policies on human well-being in the rich and poor nations. The task of finding policy solutions to resolve the controversies are reviewed through empirical investigations and the analyses of trends indicated within economic and social indicators and data. These revealed how the adoption of social policy measures in translating the gains from economic growth, towards promoting education, public health, and equity, generate social progress and longer life expectancy, higher economic growth, and sustain more stable macro economy for the nations. Social policy is concerned with the translation of benefits from objectives of global economic growth policies, to objectives of social development policy in nation states. Social policy, therefore, represents an open door whereby benefits of economic growth policies are linked with the broader objectives of social development policy, thereby enhancing the possibility of extending benefits from economic growth to all human being in every nation.

Application of Open Innovation Paradigm in Small and Medium Enterprises in Russia

The objective of this study is to explore how the Open Innovation paradigm is applied in by small and medium-size enterprises in Russia. The focus of the study is to understand how the processes of research and development and commercialization proceed in these kind of companies and to which extent they apply open innovation principles. Russian leadership makes certain steps for transition from the export of raw materials to an innovative model of economic growth. The research aims to disclose actual impact of these attempts. The closed innovation model and the erosion factors which lead to the destruction of an old one and emergence of new model are described. Features of open innovation implementation and intellectual property rights protection in small and medium enterprises are presented. To achieve the objective, a qualitative case study approach was chosen. Research includes facts and figures, views and opinions of management of studied companies related to innovation process in the company and in Russia in general. The research depicts the features of Open Innovation implementation by SMEs in Russia. A large number of research centers with necessary equipment and qualified personnel allow case companies to use external R&D effectively. They cooperate actively with research institutes, universities and laboratories. Thus, they apply inbound Open Innovation. On the contrary, lack of venture capital, low demand for technologies within the domestic market and weak protection of intellectual property limit the external paths to new markets. Licensing-out and creation of spin-off are isolated cases. Therefore, outbound Open Innovation is not a regular practice.

Maritime transportation in the Gulf of Finland in 2007 and in 2015

The Gulf of Finland is said to be one of the densest operated sea areas in the world. It is a shallow and economically vulnerable sea area with dense passenger and cargo traffic of which petroleum transports have a share of over 50 %. The winter conditions add to the risks of maritime traffic in the Gulf of Finland. It is widely believed that the growth of maritime transportation will continue also in the future. The Gulf of Finland is surrounded by three very different national economies with, different maritime transportation structures. Finland is a country of high GDP/per capita with a diversified economic structure. The number of ports is large and the maritime transportation consists of many types of cargoes: raw materials, industrial products, consumer goods, coal and petroleum products, and the Russian transit traffic of e.g. new cars and consumer goods. Russia is a large country with huge growth potential; in recent years, the expansion of petroleum exports has lead to a strong economic growth, which is also apparent in the growth of maritime transports. Russia has been expanding its port activities in the Gulf of Finland and it is officially aiming to transport its own imports and exports through the Russian ports in the future; now they are being transported to great extend through the Finnish, Estonian and other Baltic ports. Russia has five ports in the Gulf of Finland. Estonia has also experienced fast economic growth, but the growth has been slowing down already during the past couples of years. The size of its economy is small compared to Russia, which means the transported tonnes cannot be very massive. However, relatively large amounts of the Russian petroleum exports have been transported through the Estonian ports. The future of the Russian transit traffic in Estonia looks nevertheless uncertain and it remains to be seen how it will develop and if Estonia is able to find replacing cargoes if the Russian transit traffic will come to an end in the Estonian ports. Estonia’s own import and export consists of forestry products, metals or other raw materials and consumer goods. Estonia has many ports on the shores of the Gulf of Finland, but the port of Tallinn dominates the cargo volumes. In 2007, 263 M tonnes of cargoes were transported in the maritime traffic in the Gulf of Finland, of which the share of petroleum products was 56 %. 23 % of the cargoes were loaded or unloaded in the Finnish ports, 60 % in the Russian ports and 17 % in the Estonian ports. The largest ports were Primorsk (74.2 M tonnes) St. Petersburg (59.5 M tonnes), Tallinn (35.9 M tonnes), Sköldvik (19.8 M tonnes), Vysotsk (16.5 M tonnes) and Helsinki (13.4 M) tonnes. Approximately 53 600 ship calls were made in the ports of the Gulf of Finland. The densest traffic was found in the ports of St. Petersburg (14 651 ship calls), Helsinki (11 727 ship calls) and Tallinn (10 614 ship calls) in 2007. The transportation scenarios are usually based on the assumption that the amount of transports follows the development of the economy, although also other factors influence the development of transportation, e.g. government policy, environmental aspects, and social and behavioural trends. The relationship between the development of transportation and the economy is usually analyzed in terms of the development of GDP and trade. When the GDP grows to a certain level, especially the international transports increase because countries of high GDP produce, consume and thus transport more. An effective transportation system is also a precondition for the economic development. In this study, the following factors were taken into consideration when formulating the future scenarios: maritime transportation in the Gulf of Finland 2007, economic development, development of key industries, development of infrastructure and environmental aspects in relation to maritime transportation. The basic starting points for the three alternative scenarios were: • the slow growth scenario: economic recession • the average growth scenario: economy will recover quickly from current instability • the strong growth scenario: the most optimistic views on development will realize According to the slow growth scenario, the total tonnes for the maritime transportation in the Gulf of Finland would be 322.4 M tonnes in 2015, which would mean a growth of 23 % compared to 2007. In the average growth scenario, the total tonnes were estimated to be 431.6 M tonnes – a growth of 64 %, and in the strong growth scenario 507.2 M tonnes – a growth of 93%. These tonnes were further divided into petroleum products and other cargoes by country, into export, import and domestic traffic by country, and between the ports. For petroleum products, the share of crude oil and oil products was estimated and the number of tanker calls in 2015 was calculated for each scenario. However, the future development of maritime transportation in the GoF is dependent on so many societal and economic variables that it is not realistic to predict one exact point estimate value for the cargo tonnes for a certain scenario. Plenty of uncertainty is related both to the degree in which the scenario will come true as well as to the cause-effect relations between the different variables. For these reasons, probability distributions for each scenario were formulated by an expert group. As a result, a range for the total tonnes of each scenario was formulated and they are as follows: the slow growth scenario: 280.8 – 363 M tonnes (expectation value 322.4 M tonnes)

Enhancing the efficiency of freight transport by using simulation

The role of transport in the economy is twofold. As a sector of economic activity it contributes to a share of national income. On the other hand, improvements in transport infrastructure create room for accelerated economic growth. As a means to support railways as a safe and environmentally friendly transportation mode, the EU legislation has required the opening of domestic railway freight for competition from beginning of year 2007. The importance of railways as a mode of transport has been great in Finland, as a larger share of freight has been carried on rails than in Europe on average. In this thesis it is claimed that the efficiency of goods transport can be enhanced by service specific investments. Furthermore, it is stressed that simulation can and should be used to evaluate the cost-efficiency of transport systems on operational level, as well as to assess transportation infrastructure investments. In all the studied cases notable efficiency improvements were found. For example in distribution, home delivery of groceries can be almost twice as cost efficient as the current practice of visiting the store. The majority of the cases concentrated on railway freight. In timber transportation, the item with the largest annual transport volume in domestic railway freight in Finland, the transportation cost could be reduced most substantially. Also in international timber procurement, the utilization of railway wagons could be improved by combining complementary flows. The efficiency improvements also have positive environmental effects; a large part of road transit could be moved to rails annually. If impacts of freight transport are included in cost-benefit analysis of railway investments, up to 50 % increase in the net benefits of the evaluated alternatives can be experienced, avoiding a possible inbuilt bias in the assessment framework, and thus increasing the efficiency of national investments in transportation infrastructure. Transportation systems are a typical example of complex real world systems that cannot be analysed realistically by analytical methods, whereas simulation allows inclusion of dynamics and the level of detail required. Regarding simulation as a viable tool for assessing the efficiency of transportation systems finds support also in the international survey conducted for railway freight operators; operators use operations research methods widely for planning purposes, while simulation is applied only by the larger operators.

Rahatalous

Suomen Pankin kirjaston rahatalouden kokoelma on maan kattavin ja monipuolisin rahatalouteen ja rahoitusmarkkinoihin painottunut kokoelma. Kokoelmaan kuuluu merkittävä määrä nimekkeitä, joita ei ole hankittu muihin suomalaisiin kirjastoihin. Rahatalouden kokoelma koostuu monografioista, painetuista kausijulkaisuista ja elektronisista lehtitietokannoista. Kokoelma on painottunut tieteelliseen kirjallisuuteen, joka tukee pankissa tehtävää tutkimusta. Lisäksi aineistossa on huomattava määrä yleistajuista kirjallisuutta rahatalouden eri aihealueilta. Rahatalouden kokoelmaan kuuluu monografioita n. 9000 nimekettä (joulukuu 2010). Kokoelma käsittää nimekkeitä useilta eri aihealueilta, kuten rahapolitiikka ja rahateoria (n. 900), valuutat, valuuttajärjestelmät ja valuuttakurssit (n. 1100), pankkitoiminta ja keskuspankit (n. 1300), rahoitusmarkkinat (n. 1700), yleinen talousteoria ja oppihistoria (n. 1300), talouspolitiikka ja -historia (n. 450), hyöty- ja hintateoriat (n. 300), taloudellinen kasvu ja kansantulo (n. 700), suhdanteet (n. 250), julkinen talous ja verotus (n. 400) ja ekonometria (n. 600). Lehtiä kokoelmaan kuuluu n. 300 nimekettä, joista edelleen tilataan 200 nimekettä. Osa lehdistä löytyy painettuna ja osa on käytettävissä kirjastoon hankittujen elektronisten lehtitietokantojen kautta. Kokoelma karttuu pääosin ostojen kautta ja uutta aineistoa hankitaan jatkuvasti. Kokoelmaa on kartutettu systemaattisesti 1950-luvulta lähtien, minkä vuoksi siihen kuuluu merkittävästi vanhempaa aineistoa. Kokoelmaan kuuluvista kirjoista n. 26 % on julkaistu 2000-luvulla ja n. 21 % 1990-luvulla. Varsin suuri osa kirjoista, n. 29 %, on julkaistu 1970- ja 1980-luvulla. Ennen vuotta 1950 julkaistua aineistoa on n. 10 % kokoelmasta. Aineisto on valtaosin englanninkielistä, mutta kokoelmaan kuuluu myös suomen-, ruotsin- ja saksankielisiä nimekkeitä. Monografiat on luokiteltu Suomen Pankin kirjaston oman luokitusjärjestelmän mukaan. Kokoelmaa säilytetään Suomen Pankin kirjaston tiloissa jaettuna avokokoelmaan ja varastokokoelmaan. Aineiston ensisijaisia käyttäjiä ovat pankin oma henkilökunta, mutta kirjasto on avoinna myös kaikille ulkoisille asiakkaille. Kokoelma on lainattavissa muutamia poikkeuksia lukuun ottamatta.

Ulkomaiset yritykset Suomessa

Ulkomaisten yritysten rooli Suomen taloudessa on kasvanut merkittävästi viime vuosikymmenien aikana. Tänä päivänä ne ovat merkittävä työllistäjä ja yksi tärkeimmistä talouskasvua ajavista voimista. Tämän kandidaatintyön tarkoituksena on tarkastella ulkomaisten yritysten toimintaa Suomessa. Työ keskittyy erityisesti niiden syiden ympärille, joiden takia ulkomaiset yritykset haluavat toimia Suomessa. Toisaalta tarkastellaan myös sitä, mille toimialoille ulkomaiset yritykset sijoittuvat, mistä maista ne ovat kotoisin ja mitkä ominaispiirteet Suomessa niitä houkuttelevat. Tarkastelu toteutettiin yritysten ja maiden kilpailukyvyn näkökulmasta. Työssä käytetyn aineiston pohjalta tehtiin johtopäätös, että Suomeen sijoittuville ulkomaisille yrityksille markkinatekijät ovat tärkein kriteeri. Ulkomaiset yritykset arvostavat Suomessa myös toimivaa infrastruktuuria ja yhteiskuntaa, teknologista osaamista sekä suomalaista rehellisyyttä, luotettavuutta ja koulutustasoa. Merkittävä osa ulkomaisista yrityksistä tulee Suomeen naapurimaista. Valtaosa kaikista ulkomaisista yrityksistä on sijoittunut jollekin toimialalle, jossa Suomella on kansainvälistä kilpailuetua.

Education export as a form of knowledge transfer : The potential of Finnish education export in Chile

Knowledge transfer is a complex process. Knowledge transfer in the form of exporting education products from one system of education to another is particularly complicated, because each system has been developed in a particular context to meet the requirements seen as relevant at each time. National innovation systems are often seen to form an essential framework within which the development of a country, its economy and level of knowledge are considered and promoted. These systems are orientated towards the future, and as such they also provide a framework for the knowledge transfer related to the development of education. In the best of circumstances they are able to facilitate and boost this transfer both from the viewpoint of the provider and the recipient. The leading thought and the idea of the study is that education export is a form of knowledge transfer, which is illustrated by the existing models included. The purpose of this study is to explore, analyze and describe the factors and phenomena related to education export, and more specifically, those related to the experiences and potential of Finnish education export to Chile. For better understanding, of the multiplicity of the issue involved, the current status of education export between Finland and Chile and he existing efforts within the Finnish innovation network will be outlined as well as new forms of co-operation between Finland and Chile in educational matters explored. Several countries have started to commercialize their education system in order to establish themselves as emerging education exporters. Moreover, the demand for education reform is accurate in many developing countries. This offers a good match between Finland and Chile to be the example countries of the research. The main research findings suggest that there are several business areas in education export. These include degrees in education, training services and education technologies for example The factors that influence education export can be divided into four groups, including academic, cultural, political and economic aspects. Challenges to overcome include the lack of product or services to be sold, lack of market and cultural knowledge of the buyer country, financing and lack of suitable pricing model. National innovation systems could be seen as enabling entities for successful education export. The extensive networks that national innovation systems aim to form, could operate as a basis for joining the forces in selling knowledge as well as receiving knowledge in a constructive way.

Open innovation: university-industry interaction in Russia

Innovation nowadays is one of the key elements of counties’ competitiveness. In the face of continuous world economic changes, open innovation business model implementation allows many companies to improve and accelerate their innovation processes through collaboration. Universities as traditional sources of knowledge might be involved in such kind of collaboration. In developing countries, which are in transition towards innovation-based economy, as Russia, open innovation business model can serve as a tool to speed up this transition. The Master’s Thesis explores the implementation of open innovation model in collaboration between companies and universities in global scale and particularly in Russia. The study is qualitative and it is based on integrative analysis of literature, secondary data and results of the survey, conducted among Russian universities. In the thesis a model for implementation of open innovation into Triple Helix model is elaborated. The study also explores not very common practice of reverse-directional interaction - from industry to university. The findings of this research show a necessity of solving the identified problems in parallel with implementation of open innovation concept in university-industry collaboration.

Performance management through innovation capability in SMEs

Small and medium-sized enterprises (SMEs) are assuredly important to maintain strong economic growth. How to manage and maintain SMEs’ performance is a sizable challenge, and requires an understanding of the drivers of performance. Innovation capability has been suggested to be one of these key drivers. In order to manage innovation capability– performance relationship, it has to be measured. SMEs may have distinct characteristics that separate them being just smaller versions of large firms. Performance measurement and management of innovation capability is challenging, because SMEs usually have some drawbacks compared to large firms. Thus, it is unclear whether theories developed to understand large firms apply to SMEs. This research contributes to the existing discussion on performance management through innovation capability in the SME context. First, it aims at increasing understanding of the role of innovation capability in performance management. Second, it aims at clarifying the role of performance measurement in developing innovation capability. Thus, the main objective of the research is to study how to manage performance through measuring and managing innovation capability. The thesis is based on five research articles that follow a positivist approach. From a methodological point of view, quantitative and complementing conceptual methods of data collection are utilized. This research indicates that the performance management and measurement play a significant role in innovation capability in SMEs. This research makes three main contributions. First, it gives empirical evidence on the connection between innovation capability and SME performance. Second, it illustrates the connection between performance measurement and innovation capability. Thirdly, it clarifies how to measure the relationship between innovation capability and performance.

Susteinable steelmaking by process integration

Environmental issues, including global warming, have been serious challenges realized worldwide, and they have become particularly important for the iron and steel manufacturers during the last decades. Many sites has been shut down in developed countries due to environmental regulation and pollution prevention while a large number of production plants have been established in developing countries which has changed the economy of this business. Sustainable development is a concept, which today affects economic growth, environmental protection, and social progress in setting up the basis for future ecosystem. A sustainable headway may attempt to preserve natural resources, recycle and reuse materials, prevent pollution, enhance yield and increase profitability. To achieve these objectives numerous alternatives should be examined in the sustainable process design. Conventional engineering work cannot address all of these substitutes effectively and efficiently to find an optimal route of processing. A systematic framework is needed as a tool to guide designers to make decisions based on overall concepts of the system, identifying the key bottlenecks and opportunities, which lead to an optimal design and operation of the systems. Since the 1980s, researchers have made big efforts to develop tools for what today is referred to as Process Integration. Advanced mathematics has been used in simulation models to evaluate various available alternatives considering physical, economic and environmental constraints. Improvements on feed material and operation, competitive energy market, environmental restrictions and the role of Nordic steelworks as energy supplier (electricity and district heat) make a great motivation behind integration among industries toward more sustainable operation, which could increase the overall energy efficiency and decrease environmental impacts. In this study, through different steps a model is developed for primary steelmaking, with the Finnish steel sector as a reference, to evaluate future operation concepts of a steelmaking site regarding sustainability. The research started by potential study on increasing energy efficiency and carbon dioxide reduction due to integration of steelworks with chemical plants for possible utilization of available off-gases in the system as chemical products. These off-gases from blast furnace, basic oxygen furnace and coke oven furnace are mainly contained of carbon monoxide, carbon dioxide, hydrogen, nitrogen and partially methane (in coke oven gas) and have proportionally low heating value but are currently used as fuel within these industries. Nonlinear optimization technique is used to assess integration with methanol plant under novel blast furnace technologies and (partially) substitution of coal with other reducing agents and fuels such as heavy oil, natural gas and biomass in the system. Technical aspect of integration and its effect on blast furnace operation regardless of capital expenditure of new operational units are studied to evaluate feasibility of the idea behind the research. Later on the concept of polygeneration system added and a superstructure generated with alternative routes for off-gases pretreatment and further utilization on a polygeneration system producing electricity, district heat and methanol. (Vacuum) pressure swing adsorption, membrane technology and chemical absorption for gas separation; partial oxidation, carbon dioxide and steam methane reforming for methane gasification; gas and liquid phase methanol synthesis are the main alternative process units considered in the superstructure. Due to high degree of integration in process synthesis, and optimization techniques, equation oriented modeling is chosen as an alternative and effective strategy to previous sequential modelling for process analysis to investigate suggested superstructure. A mixed integer nonlinear programming is developed to study behavior of the integrated system under different economic and environmental scenarios. Net present value and specific carbon dioxide emission is taken to compare economic and environmental aspects of integrated system respectively for different fuel systems, alternative blast furnace reductants, implementation of new blast furnace technologies, and carbon dioxide emission penalties. Sensitivity analysis, carbon distribution and the effect of external seasonal energy demand is investigated with different optimization techniques. This tool can provide useful information concerning techno-environmental and economic aspects for decision-making and estimate optimal operational condition of current and future primary steelmaking under alternative scenarios. The results of the work have demonstrated that it is possible in the future to develop steelmaking towards more sustainable operation.