Novel word learning ability in chronic post-stroke aphasia : variability and modality effects

Novel word learning has been rarely studied in people with aphasia (PWA), although it can provide a relatively pure measure of their learning potential, and thereby contribute to the development of effective aphasia treatment methods. The main aim of the present thesis was to explore the capacity of PWA for associative learning of word–referent pairings and cognitive-linguistic factors related to it. More specifically, the thesis examined learning and long-term maintenance of the learned pairings, the role of lexical-semantic abilities in learning as well as acquisition of phonological versus semantic information in associative novel word learning. Furthermore, the effect of modality on associative novel word learning and the neural underpinnings of successful learning were explored. The learning experiments utilized the Ancient Farming Equipment (AFE) paradigm that employs drawings of unfamiliar referents and their unfamiliar names. Case studies of Finnishand English-speaking people with chronic aphasia (n = 6) were conducted in the investigation. The learning results of PWA were compared to those of healthy control participants, and active production of the novel words and their semantic definitions was used as learning outcome measures. PWA learned novel word–novel referent pairings, but the variation between individuals was very wide, from more modest outcomes (Studies I–II) up to levels on a par with healthy individuals (Studies III–IV). In incidental learning of semantic definitions, none of the PWA reached the performance level of the healthy control participants. Some PWA maintained part of the learning outcomes up to months post-training, and one individual showed full maintenance of the novel words at six months post-training (Study IV). Intact lexical-semantic processing skills promoted learning in PWA (Studies I–II) but poor phonological short-term memory capacities did not rule out novel word learning. In two PWA with successful learning and long-term maintenance of novel word–novel referent pairings, learning relied on orthographic input while auditory input led to significantly inferior learning outcomes (Studies III–IV). In one of these individuals, this previously undetected modalityspecific learning ability was successfully translated into training with familiar but inaccessible everyday words (Study IV). Functional magnetic resonance imaging revealed that this individual had a disconnected dorsal speech processing pathway in the left hemisphere, but a right-hemispheric neural network mediated successful novel word learning via reading. Finally, the results of Study III suggested that the cognitive-linguistic profile may not always predict the optimal learning channel for an individual with aphasia. Small-scale learning probes seem therefore useful in revealing functional learning channels in post-stroke aphasia.

Spatial and temporal variation in fish populations and assemblages in coastal waters of the northern Baltic Proper

The distribution and traits of fish are of interest both ecologically and socio-economically. In this thesis, phenotypic and structural variation in fish populations and assemblages was studied on multiple spatial and temporal scales in shallow coastal areas in the archipelago of the northern Baltic Proper. In Lumparn basin in Åland Islands, the fish assemblage displayed significant seasonal variation in depth zone distribution. The results indicate that investigating both spatial and temporal variation in small scale is crucial for understanding patterns in fish distribution and community structure in large scale. The local population of Eurasian perch Perca fluviatilis L displayed habitat-specific morphological and dietary variation. Perch in the pelagic zone were on average deeper in their body shape than the littoral ones and fed on fish and benthic invertebrates. The results differ from previous studies conducted in freshwater habitats, where the pelagic perch typically are streamlined in body shape and zooplanktivorous. Stable isotopes of carbon and nitrogen differed between perch with different stomach contents, suggesting differentiation of individual diet preferences. In the study areas Lumparn and Ivarskärsfjärden in Åland Islands and Galtfjärden in Swedish east coast, the development in fish assemblages during the 2000’s indicated a general shift towards higher abundances of small-bodied lower-order consumers, especially cyprinids. For European pikeperch Sander lucioperca L., recent declines in adult fish abundances and high mortalities (Z = 1.06–1.16) were observed, which suggests unsustainably high fishing pressure on pikeperch. Based on the results it can be hypothesized that fishing has reduced the abundances of large predatory fish, which together with bottom-up forcing by eutrophication has allowed the lower-order consumer species to increase in abundances. This thesis contributes to the scientific understanding of aquatic ecosystems with new descriptions on morphological and dietary adaptations in perch in brackish water, and on the seasonal variation in small-scale spatial fish distribution. The results also demonstrate anthropogenic effects on coastal fish communities and underline the urgency of further reducing nutrient inputs and regulating fisheries in the Baltic Sea region.

Fuzzy real option analysis in patent related decision making and patent valuation

The shift towards a knowledge-based economy has inevitably prompted the evolution of patent exploitation. Nowadays, patent is more than just a prevention tool for a company to block its competitors from developing rival technologies, but lies at the very heart of its strategy for value creation and is therefore strategically exploited for economic pro t and competitive advantage. Along with the evolution of patent exploitation, the demand for reliable and systematic patent valuation has also reached an unprecedented level. However, most of the quantitative approaches in use to assess patent could arguably fall into four categories and they are based solely on the conventional discounted cash flow analysis, whose usability and reliability in the context of patent valuation are greatly limited by five practical issues: the market illiquidity, the poor data availability, discriminatory cash-flow estimations, and its incapability to account for changing risk and managerial flexibility. This dissertation attempts to overcome these impeding barriers by rationalizing the use of two techniques, namely fuzzy set theory (aiming at the first three issues) and real option analysis (aiming at the last two). It commences with an investigation into the nature of the uncertainties inherent in patent cash flow estimation and claims that two levels of uncertainties must be properly accounted for. Further investigation reveals that both levels of uncertainties fall under the categorization of subjective uncertainty, which differs from objective uncertainty originating from inherent randomness in that uncertainties labelled as subjective are highly related to the behavioural aspects of decision making and are usually witnessed whenever human judgement, evaluation or reasoning is crucial to the system under consideration and there exists a lack of complete knowledge on its variables. Having clarified their nature, the application of fuzzy set theory in modelling patent-related uncertain quantities is effortlessly justified. The application of real option analysis to patent valuation is prompted by the fact that both patent application process and the subsequent patent exploitation (or commercialization) are subject to a wide range of decisions at multiple successive stages. In other words, both patent applicants and patentees are faced with a large variety of courses of action as to how their patent applications and granted patents can be managed. Since they have the right to run their projects actively, this flexibility has value and thus must be properly accounted for. Accordingly, an explicit identification of the types of managerial flexibility inherent in patent-related decision making problems and in patent valuation, and a discussion on how they could be interpreted in terms of real options are provided in this dissertation. Additionally, the use of the proposed techniques in practical applications is demonstrated by three fuzzy real option analysis based models. In particular, the pay-of method and the extended fuzzy Black-Scholes model are employed to investigate the profitability of a patent application project for a new process for the preparation of a gypsum-fibre composite and to justify the subsequent patent commercialization decision, respectively; a fuzzy binomial model is designed to reveal the economic potential of a patent licensing opportunity.

Influence of Travelling Current Linkage Harmonics on Inductance Variation, Torque Ripple and Sensorless Capability of Tooth-Coil Permanent-Magnet Synchronous Machines

This paper introduces an important source of torque ripple in PMSMs with tooth-coil windings (TC-PMSMs). It is theoretically proven that saturation and cross-saturation phenomena caused by the non-synchronous harmonics of the stator current linkage cause a synchronous inductance variation with a particular periodicity. This, in turn, determines the magnitude of the torque ripple and can also deteriorate the performance of signal-injection-based rotor position estimation algorithms. An improved dq- inductance model is proposed. It can be used in torque ripple reduction control schemes and can enhance the self-sensing capabilities of TC-PMSMs

Comparison of Model-Based Flow Rate Estimation Methods in Frequency-Converter-Driven Pumps and Fans

Fluid handling systems such as pump and fan systems are found to have a significant potential for energy efficiency improvements. To deliver the energy saving potential, there is a need for easily implementable methods to monitor the system output. This is because information is needed to identify inefficient operation of the fluid handling system and to control the output of the pumping system according to process needs. Model-based pump or fan monitoring methods implemented in variable speed drives have proven to be able to give information on the system output without additional metering; however, the current model-based methods may not be usable or sufficiently accurate in the whole operation range of the fluid handling device. To apply model-based system monitoring in a wider selection of systems and to improve the accuracy of the monitoring, this paper proposes a new method for pump and fan output monitoring with variable-speed drives. The method uses a combination of already known operating point estimation methods. Laboratory measurements are used to verify the benefits and applicability of the improved estimation method, and the new method is compared with five previously introduced model-based estimation methods. According to the laboratory measurements, the new estimation method is the most accurate and reliable of the model-based estimation methods.

Ball Bearing Model Performance on Various Sized Rotors with and without Centrifugal and Gyroscopic Forces

Bearing performance signi cantly a ects the dynamic behaviors and estimated working life of a rotating system. A common bearing type is the ball bearing, which has been under investigation in numerous published studies. The complexity of the ball bearing models described in the literature varies. Naturally, model complexity is related to computational burden. In particular, the inclusion of centrifugal forces and gyroscopic moments signi cantly increases the system degrees of freedom and lengthens solution time. On the other hand, for low or moderate rotating speeds, these e ects can be neglected without signi cant loss of accuracy. The objective of this paper is to present guidelines for the appropriate selection of a suitable bearing model for three case studies. To this end, two ball bearing models were implemented. One considers high-speed forces, and the other neglects them. Both models were used to study a three structures, and the simulation results were.

Development and characterization of thin printed films for gas sensing applications

The monitoring and control of hydrogen sulfide (H2S) level is of great interest for a wide range of application areas including food quality control, defense and antiterrorist applications and air quality monitoring e.g. in mines. H2S is a very poisonous and flammable gas. Exposure to low concentrations of H2S can result in eye irritation, a sore throat and cough, shortness of breath, and fluid retention in the lungs. These symptoms usually disappear in a few weeks. Long-term, low-level exposure may result in fatigue, loss of appetite, headache, irritability, poor memory, and dizziness. Higher concentrations of 700 - 800 ppm tend to be fatal. H2S has a characteristic smell of rotten egg. However, because of temporary paralysis of olfactory nerves, the smelling capability at concentrations higher than 100 ppm is severely compromised. In addition, volatile H2S is one of the main products during the spoilage of poultry meat in anaerobic conditions. Currently, no commercial H2S sensor is available which can operate under anaerobic conditions and can be easily integrated in the food packaging. This thesis presents a step-wise progress in the development of printed H2S gas sensors. Efforts were made in the formulation, characterization and optimization of functional printable inks and coating pastes based on composites of a polymer and a metal salt as well as a composite of a metal salt and an organic acid. Different processing techniques including inkjet printing, flexographic printing, screen printing and spray coating were utilized in the fabrication of H2S sensors. The dispersions were characterized by measuring turbidity, surface tension, viscosity and particle size. The sensing films were characterized using X-ray photoelectron spectroscopy, X-ray diffraction, atomic force microscopy and an electrical multimeter. Thin and thick printed or coated films were developed for gas sensing applications with the aim of monitoring the H2S concentrations in real life applications. Initially, a H2S gas sensor based on a composite of polyaniline and metal salt was developed. Both aqueous and solvent-based dispersions were developed and characterized. These dispersions were then utilized in the fabrication of roll-to-roll printed H2S gas sensors. However, the humidity background, long term instability and comparatively lower detection limit made these sensors less favourable for real practical applications. To overcome these problems, copper acetate based sensors were developed for H2S gas sensing. Stable inks with excellent printability were developed by tuning the surface tension, viscosity and particle size. This enabled the formation of inkjet-printed high quality copper acetate films with excellent sensitivity towards H2S. Furthermore, these sensors showed negligible humidity effects and improved selectivity, response time, lower limit of detection and coefficient of variation. The lower limit of detection of copper acetate based sensors was further improved to sub-ppm level by incorporation of catalytic gold nano-particles and subsequent plasma treatment of the sensing film. These sensors were further integrated in an inexpensive wirelessly readable RLC-circuit (where R is resistor, L is inductor and C is capacitor). The performance of these sensors towards biogenic H2S produced during the spoilage of poultry meat in the modified atmosphere package was also demonstrated in this thesis. This serves as a proof of concept that these sensors can be utilized in real life applications.

Model-based testing of software systems : functionality and performance

Software is a key component in many of our devices and products that we use every day. Most customers demand not only that their devices should function as expected but also that the software should be of high quality, reliable, fault tolerant, efficient, etc. In short, it is not enough that a calculator gives the correct result of a calculation, we want the result instantly, in the right form, with minimal use of battery, etc. One of the key aspects for succeeding in today's industry is delivering high quality. In most software development projects, high-quality software is achieved by rigorous testing and good quality assurance practices. However, today, customers are asking for these high quality software products at an ever-increasing pace. This leaves the companies with less time for development. Software testing is an expensive activity, because it requires much manual work. Testing, debugging, and verification are estimated to consume 50 to 75 per cent of the total development cost of complex software projects. Further, the most expensive software defects are those which have to be fixed after the product is released. One of the main challenges in software development is reducing the associated cost and time of software testing without sacrificing the quality of the developed software. It is often not enough to only demonstrate that a piece of software is functioning correctly. Usually, many other aspects of the software, such as performance, security, scalability, usability, etc., need also to be verified. Testing these aspects of the software is traditionally referred to as nonfunctional testing. One of the major challenges with non-functional testing is that it is usually carried out at the end of the software development process when most of the functionality is implemented. This is due to the fact that non-functional aspects, such as performance or security, apply to the software as a whole. In this thesis, we study the use of model-based testing. We present approaches to automatically generate tests from behavioral models for solving some of these challenges. We show that model-based testing is not only applicable to functional testing but also to non-functional testing. In its simplest form, performance testing is performed by executing multiple test sequences at once while observing the software in terms of responsiveness and stability, rather than the output. The main contribution of the thesis is a coherent model-based testing approach for testing functional and performance related issues in software systems. We show how we go from system models, expressed in the Unified Modeling Language, to test cases and back to models again. The system requirements are traced throughout the entire testing process. Requirements traceability facilitates finding faults in the design and implementation of the software. In the research field of model-based testing, many new proposed approaches suffer from poor or the lack of tool support. Therefore, the second contribution of this thesis is proper tool support for the proposed approach that is integrated with leading industry tools. We o er independent tools, tools that are integrated with other industry leading tools, and complete tool-chains when necessary. Many model-based testing approaches proposed by the research community suffer from poor empirical validation in an industrial context. In order to demonstrate the applicability of our proposed approach, we apply our research to several systems, including industrial ones.

Genetic diversity and phenotypic variability of phytoplankton populations in the Baltic Sea

En av naturens mest grundläggande aspekter är den enorma mängd av variation som existerar mellan arter. Denna variation har lett oss till att klassificera olika organismer på basis av morfologiska skillnader och på senare tid till att jämföra genetiska skillnader på individens nivå. Den marina kiselalgen Skeletonema marinoi är en av de vanligaste växtplanktonarter i Östersjön under vårblomningen och anses viktig för den årliga produktionen. En av mina främsta målsättningar var att beskriva den intra-specifika diversiteten hos denna art längs med miljögradienter i Östersjön. Ett annat mål var att klargöra de faktorer som eventuellt är involverade i konfigurationen av genetisk diversitet och differentiering. Med hjälp av genetiska markörer visade jag att den genetiska diversiteten hos S. marinoi populationer i Östersjön är lägre jämfört med populationer i östra delen av Nordsjön. Arten är genetiskt uppdelad så att en utpräglad population förekommer i Östersjön och en annan, genetiskt åtskild population förekommer norr om de Danska sunden. Resultaten visar att de genetiskt åtskilda populationerna är anpassade till lokala salinitetsförhållanden. Genflödet mellan populationerna korrelerade kraftigt med havströmmar i området. Mina studier avslöjade även omfattande variation av fenotypiska, ekologiskt vikitga särdrag hos olika kloner. Djurplankton som äter kiselalger kunde modifiera den klonala mångfalden av fenotypiskt variabla S. marinoi populationer. En ökad klonal mångfald ledde till högre prestationsförmåga i fråga om primär produktion och stabiliserade ekofysiologiska funktioner. Som visas i denna avhandling består en art allt som oftast av åtskilliga genetiska varianter med fenotypiska skillnader. Kunskap om sådana intra-specifika skillnader är en förutsättning för att vi skall kunna förstå var och varför arter förekommer. Denna kunskap utgör även en grund för prognoser som siktar på att förutspå huruvida arter kan anpassa sig till framtida miljöförhållanden. ------------------------------------------------------ Suunnaton määrä variaatioita eliölajien välillä on perustavanlaatuinen ominaisuus luonnossa. Perinteisesti tätä monimuotoisuutta on käytetty organismien luokittelemiseen eri lajeihin niiden morfologisten eroavaisuuksien perusteella. Hiljattain myös geneettisten erojen huomioimista yksilötasolla on hyödynnetty lajien luokittelemisessa. Merialueilla esiintyvä piilevä, Skeletonema marinoi on yksi Itämeren tavallisimmista kasviplanktonlajeista kevätkukinnan aikana. Tavoitteenani oli selventää geneettistä ja fenotyyppistä monimuotoisuutta pitkin Itämeren ympäristögradienttejä. Geneettisen monimuotoisuuteen ja erkaantumiseen vaikuttavien tekijöiden selvittäminen oli tärkeä aspekti väitöstutkimuksessani. Geneettisiä markkereita käyttämällä pystyin toteamaan, että S. marinoi levän geneettinen monimuotoisuus on Itämeressä merkittävästi alhaisempi kuin läheisessä Pohjanmeren itäosassa. Tutkittu laji jakautuu geneettisesti yhteen erilliseen populaatioon Itämeressä ja toiseen selvästi erottuvaan populaatioon Tanskan salmien pohjoispuolella. Kokeellisten tulosten perusteella nämä geneettisesti erilaistuneet populaatiot ovat kumpikin sopeutuneet paikalliseen veden suolapitoisuuteen. Populaatioiden välisen geenivirran ja merivirtojen luoman yhteyden välillä havaittiin vahva korrelaatio. Tutkimukseni paljastivat myös laajaa vaihtelua Skeletonema-kloonien ekologisesti tärkeissä ominaisuuksissa. Kokeellisten tutkimusteni perusteella laiduntajat pystyivät muuttamaan geneettisten kloonien lukumäärää monimuotoisissa S. marinoi populaatioissa. Lisääntynyt kloonien lukumäärä paransi perustuotantokykyä ja vakautti ekofysiologisia toimintoja. Kuten tässä väitöstutkimuksessa osoitetaan, lajit koostuvat useimmiten lukuisista geneettisistä muunnelmista, jotka eroavat usein fenotyypeiltään. Ymmärtääksemme missä tietyt lajit esiintyvät ja miksi, tarvitsemme tietoa lajien sisäisistä vaihteluista. Tämä tieto on tarpeellista, jotta voimme ennustaa lajien sopeutumista tuleviin ympäristönmuutoksiin.

Sphingosine-1-phosphate-evoked invasion of follicular thyroid cancer cells : evidence for the involvement of HIF-Iα, MMP2 and MMP9

Sphingolipids are widely expressed molecules, which traditionally were considered to have majorly structural properties. Nowadays, however, they are implicated in a wide range of different biological processes. The bioactive lipid sphingosine 1-phosphate (S1P) has emerged during the past decade as one of the most studied molecules due to its proliferative and pro-migratory abilities both during normal physiology and in the pathology of a subset of different diseases. Migration and invasion of cancer cells require changes in cell behavior and modulation of the tissue microenvironment. Tumor aggressiveness is markedly enhanced by hypoxia, in which hypoxia inducible transcription factors 1-2α (HIF-1-2α) are activated to promote metabolism, proliferation and migration. Invasion requires degradation of the extracellular matrix (ECM) achieved by several degrading and remodeling enzymes. Matrix metalloproteinases (MMPs) are broadly expressed and well accepted as proteolytic enzymes with essential roles both in normal physiology and in pathology. Previously, S1P was shown to strongly evoke migration of follicular ML-1 thyroid cancer cells. The objective of this study was to further investigate and understand the mechanisms behind this regulation. In the first project it was demonstrated that S1P enhances the expression and activity of HIF-1α. S1P enhanced the expression of HIF-1α by increasing its synthesis and stability. The S1P-increased HIF-1α was mediated via S1P3, Gi/0, PI3K, PKCβI, ERK1/2, mTOR and translation factors p70S6K and eIF4E. Finally, it was shown that HIF-1α mediated S1P-induced migration. The ECM is constituted of a complex and coordinated assembly of many types of proteins. In order to be able to invade, cells need to break down the ECM, therefore several key players in this event were investigated in the second project. S1P increased the secretion and activity of MMP2 and MMP9 via S1P-receptor 1 and 3 and that these MMPs participated in the S1P-facilitated invasion of ML-1 cells. In this interplay, calpains and Rac1 were involved, both of which are crucial players in migration and invasion. The prognosis for some types of thyroid cancer is relatively good. However, there are forms of thyroid cancers, for which there are no treatments or the current available treatments are inefficient. Thus, new medical interventions are urgently needed. In the third project the significance of the S1P-receptor modulating drug FTY720, which is currently used for the treatment of multiple sclerosis (MS), was studied. The effect of FTY720 was tested on several thyroid cancer cell lines, and it inhibited the proliferation and invasion of all cancer cell lines tested. In ML-1 cells, FTY720 attenuated invasion by blocking signaling intermediates important for migration and invasion of the cells. Moreover, FTY720 inhibited the proliferation of ML-1 cells by increasing the expression of p21 and p27, hence, inducing cell arrest in G1 phase of the cell cycle. Thus, it can be suggested that FTY720 could be used in the treatment of thyroid cancer.

Standing before a sentence : Moore’s paradox and a perspective from within language

Med avstamp i ett satsbegrepp som inspirerats av Ludwig Wittgenstein, där sats och kontext betraktas som internt förbundna och där den verkliga användningen av en sats är central för dess mening, visar avhandlingen hur filosofers olika uppfattning om den filosofiska terminologins roll och möjligheter har följder för deras sätt att uppfatta och behandla filosofiska frågeställningar. Moores paradox fungerar som testfall. Denna kända filosofiska frågeställning har diskuterats sedan 1940-talet och kretsar kring hävdandet av satsen ”Jag tror att det regnar och det regnar inte”. Problemet är att det vore märkligt för en talare att hävda satsen om sig själv: det verkar finnas ett logiskt hinder för att hävda en sats även om den är välformad, kunde vara sann och inte på ett entydigt sätt innehåller en kontradiktion. Moores paradox behandlas genom att granska några lösningsförslag (framförda av bl.a. G.E. Moore, J. L. Austin, J. Searle) och de uppfattningar om språket som de förutsätter. Genom att kontrastera dessa med ett användarperspektiv där språkets användning i meningsfulla sammanhang förväntas spela en central roll i behandlingen av paradoxen visar författaren hur också den intellektuella kontext inom vilken en filosof betraktar paradoxen spelar en avgörande roll för vilka mått som krävs för att upplösa den. Istället för att föreslå en egen lösning presenteras en behandling av paradoxen genom en diskussion och utredning av de grundvillkor som leder till att den uppstår. Här intar satsbegreppet en central plats. Avhandlingen är författad inom traditionen efter den senare Wittgenstein (närmare bestämt den gren som ansluter sig till en s.k. terapeutisk filosofisyn) men går i dialog med filosofiskt arbete som ligger utanför traditionen. Författaren strävar både till att medla mellan, sammanföra och särskilja olika temata som behandlats på ett sätt inom traditionen och på andra sätt utanför den och använder sig här av metaforen att filosofera inifrån i kontrast till utanför språket. Avhandlingens huvudsakliga bidrag är till metafilosofin genom dess fokus på filosofins metod. ------------------------------------------------------------ Mooren paradoksi on tunnettu filosofinen ongelma, josta on keskusteltu 1940-luvulta alkaen. Paradoksin keskeisenä osana esiintyy väitelause ”Uskon, että ulkona sataa, mutta ulkona ei sada”. Ongelman lähtökohta on, että olisi merkillistä jos puhuja esittäisi lauseen itseään koskevana väitteenä: väite näyttää olevan loogisesti mahdoton esittää, vaikka se on hyvinmuodostettu, mahdollisesti tosi, eikä yksiselitteisellä tavalla sisällä kontradiktiota. Tässä väitöskirjassa Mooren paradoksi esiintyy esimerkkinä filosofisesta ongelmasta, jossa mm. lausekäsitteellä on keskeinen rooli ja jonka avulla voidaan muodostella ns. kielensisäinen filosofinen näkökulma. Mooren paradoksia käsitellään tarkastelemalla muutamia ratkaisuehdotuksia (mm. G.E. Mooren, J.L. Austinin, J. Searlen esittämät) ja niitä kielikäsityksiä joita nämä ratkaisuehdotukset edellyttävät. Asettamalla vastakkain ratkaisuehdotukset ja käyttäjänäkymä, jossa kielenkäyttö mielekkäissä konteksteissa asetetaan keskeiseen asemaan paradoksin käsittelyssä, kirjoittaja osoittaa miten myös paradoksin filosofisen tarkastelun intellektuaalinen konteksti on hyväksyttävien toimenpiteiden löytämisen kannalta ratkaisevaa. Uuden ratkaisun sijaan kirjoittaja ehdottaa paradoksin terapeuttista käsittelyä: keskustelua ja selontekoa niistä perusehdoista, jotka johtavat sen syntyyn. Tässä käsittelyssä lausekäsite on keskipisteenä – erityisesti Ludwig Wittgensteinin inspiroima lausekäsitys, jossa lauseen mielekkyyden kannalta sen todellinen käyttö mielekkäässä kontekstissa on ratkaiseva tekijä. Väitöskirja liittyy myöhäisiwittgensteinilaiseen perinteeseen, johon kuuluu ns. terapeuttinen filosofiankäsitys, mutta teos keskustelee myös tradition ulkopuolisten ajattelijoiden kanssa yrittäen yhdistää, sovitella ja myös eritellä teemoja, joita käsitellään yhdellä tavalla tradition sisällä ja toisella tavalla sen ulkopuolella. Väitöskirjan pääasiallinen panos sijoittuu metafilosofiaan, koska sen mielenkiinnon kohteena ovat erityisesti filosofian menetelmät.

Paper- and membrane-based ion-modulated electronics

Avhandlingen handlar om pappers- och membranbaserad jonmodulerad elektronik. Målet med forskningen har varit att utveckla billig, miljövänlig och brännbar elektronik, som kan användas i vardagliga engångsprodukter. Baskomponenterna som utvecklas och presenteras i avhandlingen är transistorer och kondensatorer. Mer komplicerad logisk kretselektronik demonstreras också med hjälp av dessa komponenter. Substraten som utnyttjas vid framställningen av dessa elektroniska komponenter är papper och membran. Dessa substrat är flexibla, hållbara, billiga, miljövänliga, etc. och därför väl anpassade för befintliga tryckteknologier. Själva baskomponenterna framställs sedan på dessa substrat genom att trycka flera skikt på varandra, där varje enskilt skikt är ett individuellt material. Detta är möjligt eftersom de organiska materialen som används i dessa komponenter är upplösta i ett lösningsmedel och kan därmed tryckas på samma sätt som ett vanligt bläck. Ett tredimensionellt objekt kan på detta sätt framställas. I avhandlingen presenteras flera olika typer av transistorer, men den gemensamma nämnaren bland dessa är att isolatorn är en jonledare. Denna, ganska ovanliga, transistormodellen har den stora fördelen att lågspänningskomponenter kan relativt enkelt framställas. Det som är speciellt med våra transistorer är att vi har använt miljövänliga jonledare. Detta, bl.a., leder till att våra komponenter visar både god prestanda, tillika som de är miljövänliga. I avhandlingen demonstrerar vi även tryckta superkondensatorer, en motsvarighet till laddningsbara batterier, konstruerade på papper med aktiverat kol och miljövänliga jonledare. De mest komplicerade logiska kretsar som demonstreras i denna avhandling är ring-oscillatorer och 1-bits-minnen konstruerade på papper. --------------------------------------------- Väitöskirja käsittelee paperille ja polymeerikalvolle tulostettua ionimoduloitua elektroniikkaa. Tutkimuksen tavoitteena oli kehittää edullista, ympäristöystävällistä ja polttokelpoista elektroniikkaa, jota voidaan käyttää esim. tavanomaisissa kertakäyttötuotteissa. Väitöskirjassa esitellään erilaisia transistoreita ja kondensaattoreita. Näitä elektronisia peruskomponentteja käyttäen demonstroidaan myös monimutkaisempia loogisia piirejä. Komponenttien valmistuksessa alustana käytettiin paperia ja polymeerikalvoa. Valitut alustat ovat joustavia ja kestäviä, ja ovat siksi hyvin yhteensopivia olemassa olevien tulostusmenetelmien kanssa. Peruskomponentit valmistettiin tulostamalla eri materiaaleja päällekkäin. Komponenteissa käytettävät orgaaniset aineet ovat liuenneessa muodossa musteessa, joka voidaan tulostaa samalla periaatteella kuin mikä tahansa normaali muste. Tällä menetelmällä voidaan valmistaa myös kolmiulotteisia tuotteita. Väitöskirjassa esitellään useita erityyppisiä transistoreita, joissa yhdistävänä tekijänä on ionisesti johtava eriste. Tällaista suhteellisen harvinaista transistorityyppiä käyttämällä voidaan mahdollistaa matala-jännitteisten komponenttien yksinkertainen valmistus. Valmistettujen transistoreiden etu on ionisten nesteiden ympäristöystävällisyys. Elektroniset komponentit ovat täten hyviä suorituskyvyltään, mutteivät haitallisia ympäristölle. Väitöskirjassa demonstroidaan myös tulostettujen superkondensaattoreiden, eli ladattavien paristojen vastineiden, valmistus paperille aktiivihiiltä ja ionisia nesteitä käyttäen. Kaikkein monimutkaisimmat loogiset piirit, jotka tässä väitöskirjassa esitellään, ovat rengasoskillaattorit sekä 1-bittinen paperille valmistettu muisti.

Bio and chemocatalysis for stereo and regioselective one-pot reaction applications

The development of cost efficient, selective and sustainable chemical processes for production of chiral building blocks is of great importance in synthetic and industrial organic chemistry. One way to reach these objectives is to carry out several reactions steps in one vessel at one time. Furthermore, when this kind of one-pot multi step reactions are catalyzed by heterogeneous chemo- and bio-catalysts, which can be separated from the reaction products by filtration, practical access to chiral small molecules for further utilization can be obtained. The initial reactions studied in this thesis are the two step dynamic kinetic resolution of rac-2-hydroxy-1-indanone and the regioselective hydrogenation of 1,2-indanedione. These reactions are then combined in a new heterogeneously catalyzed one-pot reaction sequence enabling simple recovery of the catalysts by filtration, facilitating simple reaction product isolation. Conclusively, the readily available 1,2-indanedione is by the presented one-pot sequence, utilizing heterogeneous enzyme and transition metal based catalysts, transferred with high regio- and stereoselectivity to a useful chiral vicinal hydroxyl ketone structure. Additional and complementary investigation of homogeneous half-sandwich ruthenium complexes for catalyzing the epimerization of chiral secondary alcohols of five natural products containing additional non-functionalized stereocenters was conducted. In principle, this kind of epimerization reactions of single stereocenters could be utilized for converting inexpensive starting materials, containing other stereogenic centers, into diastereomeric mixtures from which more valuable compounds can be isolated by traditional isolation techniques.

Networking Notch : regulation of Notch traffic and signaling crosstalk

Utvecklingen av flercelliga organismer är en mångfacetterad process som kräver kommunikation celler emellan. Under utvecklingen av en organism måste cellerna göra vissa val, vilket bestämmer riktningen för deras fortsatta utveckling. Utgående från dessa val erhåller cellerna egenskaper som är karaktäristiska för olika celltyper. Notch-signalräckan är en viktig reglerare av valet mellan olika cellöden. Notch-signalräckan aktiveras när Notch-receptorer som uttrycks på ytan av en cell binder till Notch-ligander som uttrycks på ytan av en annan närliggande cell. Denna avhandling belyser mekanismerna som reglerar omsättningen av såväl Notch-receptorer som -ligander till och från cellmembranen, samt ökar förståelsen för hur dessa mekanismer påverkar Notch-medierade cellöden i stamceller. Internalisering av Notch receptorer anses nödvändigt för fullständig aktivering av Notch-signalvägen. De bakomliggande molekylära mekanismerna är dock fortfarande oklara. Vi har upptäckt att atypiskt protein kinas Cζ (aPKCζ) reglerar internaliseringen av Notch-receptorer. aPKCζ fosforylerar Notch, vilket leder till receptorns internalisering, men effekten är beroende av receptorns signaleringsstatus. Vi visar att aPKCζ reglerar Notch-signaleringen och styr både neuroners och muskelcellers differentiering. Ytterligare har vi analyserat samspelet mellan cellskelettet och Notch-signalvägen. Våra resultat visar att intermediärfilamenten, en del av cellskelettet, är viktiga reglerare av Notch-signaleringen både under neuronal och vaskulär utveckling. Intermediärfilamenten vimentin och GFAP reglerar uttrycket av Notch-ligander vid cellmembranen i hjärnans stödceller, astrocyterna, och påverkar därmed neuronala stamcellers cellödesbeslut. Vimentin är även viktigt reglerare av Notch-signalräckan vid angiogenesen. Celler som saknar vimentin uppvisar avvikande Notch-signalering emedan möss som saknar vimentin påvisar en fördröjd utveckling av vaskulaturen under embryonalstadiet. ------------------------------------------------- Monisoluisten organismien kehittyminen on monimutkainen prosessi, joka vaatii viestintää solujen välillä. Kehittymisen aikana solut joutuvat tiettyjen valintojen eteen, mitkä tulevat määrittämään niiden erilaistumisen suunnan. Solut omaksuvat solutyypille ominaisia ominaisuuksia näihin valintoihin perustuen Notch-signalointireitti säätelee solujen erilaistumista eri suuntiin. Notch-signalointireitti aktivoituu, kun Notch-reseptori yhden solun pinnalla sitoo Notch-ligandin toisen, viereisen solun solukalvolla. Tutkimukseni lisää tuntemusta Notch-reseptoreiden ja ligandien solun sisäisestä liikennöinnistä ja sitä säätelevistä mekanismeista, sekä tämän säätelyn vaikutuksista kantasulojen erilaistumiseen. Notch-signalointireitin aktivoituminen vaatii reseptoreiden ja ligandien sisäistämisen solukalvolta, mutta taustalla olevat ja sisäistymistä säätelevät mekanismit ovat vielä epäselviä. Tutkimukseni osoittaa, että atyyppinen proteiinikinaasi Cζ (aPKCζ) säätelee Notch-reseptoreiden endosytoosia. Endosytoosin lopputulos riippuu siitä onko reseptori aktivoitunut ligandin välityksellä vai ei. Tuloksemme osoittavat aPKCζ säätelevän Notch-signalointia ja kontrolloivan sekä hermosolujen, että lihassolujen erilaistumista. Analysoimme myös Notch-signaloinnin ja solun tukirangan vuorovaikutuksia. Välikokoiset filamentit, jotka ovat osa tukirankaa, säätelevät Notch-signalointia neuronaalisen erilaistumisen sekä verisuonten uudismuodostumisen aikana. Vimentiini ja GFAP ovat välikokoisia säikeitä, jotka säätelevät Notch-ligandien ekspressiota astrosyyttien, eli aivojen hermotukisolujen solukalvolla. Vimentiini säätelee myös Notch-signalointireittiä angiogeneesin aikana. Vimentiiniä vailla olevilla soluilla ilmenee heikentynyttä Notch-signalointia, joka voidaan liittää hiirillä ilmenevään vimenttiinin puutteesta johtuvaan viivästyneeseen verisuonien kehitykseen.

The role of metal ions in selective and sustainable processes

Sustainability and recycling are core values in today’s industrial operations. New materials, products and processes need to be designed in such a way as to consume fewer of the diminishing resources we have available and to put as little strain on the environment as possible. An integral part of this is cleaning and recycling. New processes are to be designed to improve the efficiency in this aspect. Wastewater, including municipal wastewaters, is treated in several steps including chemical and mechanical cleaning of waters. Well-cleaned water can be recycled and reused. Clean water for everyone is one of the greatest challenges we are facing today. Ferric sulphate, made by oxidation from ferrous sulphate, is used in water purification. The oxidation of ferrous sulphate, FeSO4, to ferric sulphate in acidic aqueous solutions of H2SO4 over finely dispersed active carbon particles was studied in a vigorously stirred batch reactor. Molecular oxygen was used as the oxidation agent and several catalysts were screened: active carbon, active carbon impregnated with Pt, Rh, Pd and Ru. Both active carbon and noble metal-active carbon catalysts enhanced the oxidation rate considerably. The order of the noble metals according to the effect was: Pt >> Rh > Pd, Ru. By the use of catalysts, the production capacities of existing oxidation units can be considerably increased. Good coagulants have a high charge on a long polymer chain effectively capturing dirty particles of the opposite charge. Analysis of the reaction product indicated that it is possible to obtain polymeric iron-based products with good coagulation properties. Systematic kinetic experiments were carried out at the temperature and pressure ranges of 60B100°C and 4B10 bar, respectively. The results revealed that both non-catalytic and catalytic oxidation of Fe2+ to Fe3+ take place simultaneously. The experimental data were fitted to rate equations, which were based on a plausible reaction mechanism: adsorption of dissolved oxygen on active carbon, electron transfer from Fe2+ ions to adsorbed oxygen and formation of surface hydroxyls. A comparison of the Fe2+ concentrations predicted by the kinetic model with the experimentally observed concentrations indicated that the mechanistic rate equations were able to describe the intrinsic oxidation kinetics of Fe2+ over active carbon and active carbon-noble metal catalysts. Engineering aspects were closely considered and effort was directed to utilizing existing equipment in the production of the new coagulant. Ferrous sulphate can be catalytically oxidized to produce a novel long-chained polymeric iron-based flocculent in an easy and affordable way in existing facilities. The results can be used for modelling the reactors and for scale-up. Ferric iron (Fe3+) was successfully applied for the dissolution of sphalerite. Sphalerite contains indium, gallium and germanium, among others, and the application can promote their recovery. The understanding of the reduction process of ferric to ferrous iron can be used to develop further the understanding of the dissolution mechanisms and oxidation of ferrous sulphate. Indium, gallium and germanium face an ever-increasing demand in the electronics industry, among others. The supply is, however, very limited. The fact that most part of the material is obtained through secondary production means that real production quota depends on the primary material production. This also sets the pricing. The primary production material is in most cases zinc and aluminium. Recycling of scrap material and the utilization of industrial waste, containing indium, gallium and geranium, is a necessity without real options. As a part of this study plausible methods for the recovery of indium, gallium and germanium have been studied. The results were encouraging and provided information about the precipitation of these valuables from highly acidic solutions. Indium and gallium were separated from acidic sulphuric acid solutions by precipitation with basic sulphates such as alunite or they were precipitated as basic sulphates of their own as galliunite and indiunite. Germanium may precipitate as a basic sulphate of a mixed composition. The precipitation is rapid and the selectivity is good. When the solutions contain both indium and gallium then the results show that gallium should be separated before indium to achieve a better selectivity. Germanium was separated from highly acidic sulphuric acid solutions containing other metals as well by precipitating with tannic acid. This is a highly selective method. According to the study other commonly found metals in the solution do not affect germanium precipitation. The reduction of ferric iron to ferrous, the precipitation of indium, gallium and germanium, and the dissolution of the raw materials are strongly depending on temperature and pH. The temperature and pH effect were studied and which contributed to the understanding and design of the different process steps. Increased temperature and reduced pH improve the reduction rate. Finally, the gained understanding in the studied areas can be employed to develop better industrial processes not only on a large scale but also increasingly on a smaller scale. The small amounts of indium, gallium and germanium may favour smaller and more locally bound recovery.