Suorituskyvyn mittaus ja controller toimintojen kehittäminen Venäjällä toimivassa yhteisyrityksessä

Tässä työssä tutkittiin kahden suomalaisen yrityksen omistamaa yhteisyritystä Venäjällä. Tavoitteena oli kehittää tasapainotettu mittaristo suorituskyvyn mittaukseen johtamisen tueksi. Lisäksi oli tarve parantaa materiaalinhallintaa kehittämällä controllerin työtä helpottava työkalu, sekä kehittää materiaalinhallinnan prosessia läpinäkyvämmäksi ja suoraviivaisemmaksi. Työ koostuu teoreettisesta ja empiirisestä osuudesta. Teoria koostuu raportoinnista, suorituskyvyn mittauksesta ja materiaalinhallinnan seurannasta. Työssä käytettiin laadullisia menetelmiä ja tutkimustyypiksi valikoitui toimintatutkimus. Teoreettinen aineisto on peräisin julkaisuista ja alan kirjallisuudesta. Empiirinen aineisto kerättiin pääosin haastatteluista, benchmarkkauksesta ja dokumenteista. Työn tuloksena saavutettiin päätavoite, eli kehitettiin Excel – pohjaiset työkalut suorituskyvyn mittaukseen ja materiaalinhallinnan seurantaan. Lisäksi kehitettiin kirjallinen ohjeistus näiden työkalujen käyttöön ja materiaalinhallintaprosessien suoraviivaistamiseksi. Diplomityö helpottaa yrityksen johtamista ja kontrollointia sekä sisäisesti että ulkoisesti omistajanäkökulmasta katsottuna. Venäjällä toimivan ulkomaalaisomisteisen yrityksen seuranta on haastavaa, jossa prosessien toimivuus ja läpinäkyvyys ovat olennaisessa roolissa.

Simulation and material calibration of ultra high strength steel (UHSS) S960 welded joint under static tensile test utilizing finite element method (FEM)

The aim of this work was to calibrate the material properties including strength and strain values for different material zones of ultra-high strength steel (UHSS) welded joints under monotonic static loading. The UHSS is heat sensitive and softens by heat due to welding, the affected zone is heat affected zone (HAZ). In this regard, cylindrical specimens were cut out from welded joints of Strenx® 960 MC and Strenx® Tube 960 MH, were examined by tensile test. The hardness values of specimens’ cross section were measured. Using correlations between hardness and strength, initial material properties were obtained. The same size specimen with different zones of material same as real specimen were created and defined in finite element method (FEM) software with commercial brand Abaqus 6.14-1. The loading and boundary conditions were defined considering tensile test values. Using initial material properties made of hardness-strength correlations (true stress-strain values) as Abaqus main input, FEM is utilized to simulate the tensile test process. By comparing FEM Abaqus results with measured results of tensile test, initial material properties will be revised and reused as software input to be fully calibrated in such a way that FEM results and tensile test results deviate minimum. Two type of different S960 were used including 960 MC plates, and structural hollow section 960 MH X-joint. The joint is welded by BöhlerTM X96 filler material. In welded joints, typically the following zones appear: Weld (WEL), Heat affected zone (HAZ) coarse grained (HCG) and fine grained (HFG), annealed zone, and base material (BaM). Results showed that: The HAZ zone is softened due to heat input while welding. For all the specimens, the softened zone’s strength is decreased and makes it a weakest zone where fracture happens while loading. Stress concentration of a notched specimen can represent the properties of notched zone. The load-displacement diagram from FEM modeling matches with the experiments by the calibrated material properties by compromising two correlations of hardness and strength.

Return and Volatility spillovers among stock and Foreign Exchange Markets: Empirical Evidence from selected African Markets

Return and volatility dynamics in financial markets across the world have recently become important for the purpose of asset pricing, portfolio allocation and risk management. However, volatility, which come about as a result of the actions of market participants can help adapt to different situations and perform when it really matters. With recent development and liberalization among financial markets in emerging and frontier markets, the need for how the equity and foreign exchange markets interact and the extent to which return and volatility spillover are spread across countries is of importance to investors and policy makers at large. Financial markets in Africa have received attention leading to investors diversifying into them in times of crisis and contagion effects in developed countries. Regardless of the benefits these markets may offer, investors must be wary of issues such as thin trading, volatility that exists in the equity and currency markets and its related fluctuations. The study employs a VAR-GARCH BEKK model to study the return and volatility dynamics between the stock and foreign exchange sectors and among the equity markets of Egypt, Kenya, Nigeria, South Africa and Tunisia. The main findings suggest a higher dependence of own return in the stock markets and a one way return spillover from the currencies to the equity markets except for South Africa which has a weaker interrelation among the two markets. There is a relatively limited integration among the equity markets. Return and volatility spillover is mostly uni-directional except for a bi-directional relationship between the equity markets of Egypt and Tunisia. The study implication still proves a benefit for portfolio managers diversifying in these African equity markets, since they are independent of each other and may not be highly affected by the influx of negative news from elsewhere. However, there is the need to be wary of return and volatility spillover between the equity and currency markets, hence devising better hedging strategies to curb them.

Foreign exchange exposure management in a fuel procurement company operating in the commodity markets

Fluctuating commodity prices, foreign exchange rates and interest rates are causing changes in cash flows, market value and the companies’ profit. Most of the commodities are quoted in US dollar. Companies with non-dollar accounting face a double risk in the form of the commodity price risk and foreign exchange risk. The objective of this Master’s thesis is to find out how companies under commodity should manage foreign exchange exposure. The theoretical literature is based on foreign exchange risk, commodity risk and foreign exchange exposure management. The empirical research is done by using constructive modelling of a case company in the oil industry. The exposure is model with foreign exchange net cash flow and net working capital. First, the factors affecting foreign exchange exposure in case company are analyzed, then a model of foreign exchange exposure is created. Finally, the models are compared and the most suitable method is defined. According to the literature, foreign exchange exposure is the foreign exchange net cash flow. However, the results of the study show that foreign exchange risk can be managed also with net working capital. When the purchases, sales and storage are under foreign exchange risk, the best way to manage foreign exchange exposure is with combined net cash flow and net working capital method. The foreign exchange risk policy of the company defines the appropriate way to manage foreign exchange risk.

Characterization and Investigation on Material Compatibilities of Building Integrated Photovoltaic Module Components

Building Integrated Photovoltaics (BIPV) are considered as the future of photovoltaic (PV) technology. The advantage of BIPV system is its multi-functionality; they fulfil the functions of a building envelope with the added benefit of generating power by replacing the traditional roofing and façade materials with PV that generate power. In this thesis, different types of PV cells and modules have been described in detail with their efficiencies and usage trends in the last decade. The different BIPV products for roof and façade are discussed in detail giving several examples. The electricity generation potential of BIPV in selected countries is compared with their actual electricity consumption. Further, the avoided greenhouse gas (GHG) emissions associated with electricity generation from traditional sources and transportation and distribution (T&D) losses are calculated. The results illustrate huge savings in GHGs. In BIPV different types of façade and backsheets are used. In this thesis, selected backsheets and façade were characterized in terms of their surface structure identification using infrared spectroscopy (FTIR-ATR), scanning electron microscopy with energy dispersive X-ray (SEM-EDX) and physical characterization using surface energy measurements. By using FTIR-ATR, surface polymeric materials were identified and with SEM-EDX, identification of the surface elements was possible. Surface energy measurements were useful in finding the adhesives and knowing the surface energies of the various backsheets and façade. The strength of adhesion between the facade and backsheets was studied using peel test. Four different types of adhesives were used to study the fracture pattern and peel tests values to identify the most suitable adhesive. It was found out that pretreatment increased the adhesive strength significantly.

The Impact of Foreign Direct Investment Inflows on the Economic Growth of Bangladesh. The Roles of Infrastructural Facilities

Foreign direct investment (FDI) inflow has been a key concern for Bangladesh to obtain additional support for the economic development. The Government of Bangladesh continuously competing with other South Asian countries and putting more effort to increase the number of FDI inflows in the country. From the country’s perspective, the constant increasing rate of economic growth shows a positive outcome of FDI inflow. However, the country still not performing up to the mark to pull enough FDI inflows to its potential. Thus, this study discusses about the major determinants and factors affecting FDI inflows in Bangladesh. Among those determinants and factors, infrastructural facility is considered as the most important to affect FDI inflows. FDI inflow is fundamentally depending upon infrastructural facilities to achieve its desire success. Foreign investors take this issue very seriously because based on this they can measure their ease of doing business in the host country. Despite of providing a large market size, due to having weak and lack of infrastructural facilities, Bangladesh is facing trouble in drawing attention of the foreign investors. In order to make the infrastructural facilities happen, it is highly required to organize each of the systems under of it. The body of this study discussed about the weak infrastructures in Bangladesh such as transport and communication, power and energy, education system, and governance services. Improvement in one of these systems cannot provide valuable positive changes on FDI inflows. It requires improvement in all the weak systems to grasp multinational companies and attract foreign investors. On the basis of this research problem, research questions are established. Both qualitative and quantitative methods are used to answer the research questions. Furthermore, several theories have been applied to justify possible scenarios from the research problem. In addition, the history in between Bangladesh, trade liberalization, and FDI inflows is presented briefly.

The Impact of Foreign Direct Investment Inflows on the Economic Growth of Bangladesh. The Roles of Infrastructural Facilities

Foreign direct investment (FDI) inflow has been a key concern for Bangladesh to obtain additional support for the economic development. The Government of Bangladesh continuously competing with other South Asian countries and putting more effort to increase the number of FDI inflows in the country. From the country’s perspective, the constant increasing rate of economic growth shows a positive outcome of FDI inflow. However, the country still not performing up to the mark to pull enough FDI inflows to its potential. Thus, this study discusses about the major determinants and factors affecting FDI inflows in Bangladesh. Among those determinants and factors, infrastructural facility is considered as the most important to affect FDI inflows. FDI inflow is fundamentally depending upon infrastructural facilities to achieve its desire success. Foreign investors take this issue very seriously because based on this they can measure their ease of doing business in the host country. Despite of providing a large market size, due to having weak and lack of infrastructural facilities, Bangladesh is facing trouble in drawing attention of the foreign investors. In order to make the infrastructural facilities happen, it is highly required to organize each of the systems under of it. The body of this study discussed about the weak infrastructures in Bangladesh such as transport and communication, power and energy, education system, and governance services. Improvement in one of these systems cannot provide valuable positive changes on FDI inflows. It requires improvement in all the weak systems to grasp multinational companies and attract foreign investors. On the basis of this research problem, research questions are established. Both qualitative and quantitative methods are used to answer the research questions. Furthermore, several theories have been applied to justify possible scenarios from the research problem. In addition, the history in between Bangladesh, trade liberalization, and FDI inflows is presented briefly

Foreign Divestment Decisions in Banking − Case Nordea in Poland

In the 21st century, the realignment of multinational companies’ business scope has become a major issue globally. A very prominent part of the global realignment process, alongside with mergers, acquisitions and alliances, are foreign divestments. Foreign divestments have become an integral aspect of international business since they are now widely practiced by MNCs from a growing and diverse range of home countries and host economies. The objective of this thesis is to identify the factors that contribute to foreign divestment decisions in the banking sector. This thesis is a qualitative research with a single case study approach. The chosen case of this thesis is the divestment made by the internationally operating Nordic financial service group, Nordea, in Poland in 2013. The empirical findings were obtained by interviewing experts from the case company and the interviews were conducted as theme interviews using the four themes that according to the theoretical framework of this thesis are the contributing factors in foreign divestment decisions: (1) environmental stability, (2) attractiveness of current operations, (3) strategic fit, and (4) governance issues. The empirical findings of this thesis suggest that there were four dominant contributors to the foreign divestment decision of the case company: (1) host government regulations, (2) strategic considerations, (3) economic outlook, and (4) interested buyer. The empirical findings mostly support the accuracy of the selected framework as the first three theme groups were found to be major contributors also in the case company’s foreign divestment. However, the importance of the fourth theme group, ‘governance issues’, is not supported by the findings of this thesis. Furthermore the findings suggest that in addition to the groups presented in the framework, also timing can be an import factor in divestment decisions. Three managerial recommendations can be drawn from the findings of this thesis: (1) If a foreign divestment decision is the best course of action due to strategic reasons, it should not be avoided; (2) The pre-investment due diligence processes should not be ignored since it can help to avoid unwanted divestments; and (3) Companies should concentrate on building good relationships with the host government since it can facilitate business activities in the host country.

Effect of Material Recycling on the Feasibility of Solid Recovered Fuel Fired Power Plant

This master’s thesis examines the effects of increased material recycling on different waste-to-energy concepts. With background study and a developed techno-economic computational method the feasibility of chosen scenarios with different combinations of mechanical treatment and waste firing technologies can be evaluated. The background study covers the waste scene of Finland, and potential market areas Poland and France. Calculated cases concentrate on municipal solid waste treatment in the Finnish operational environment. The chosen methodology to approach the objectives is techno-economic feasibility assessment. It combines calculation methods of literature and practical engineering to define the material and energy balances in chosen scenarios. The calculation results together with other operational and financial data can be concluded to net present values compared between the scenarios. For the comparison, four scenarios, most vital and alternative between each other, are established. The baseline scenario is grate firing of source separated mixed municipal solid waste. Second scenario is fluidized bed combustion of solid recovered fuel produced in mechanical treatment process with metal separation. Third scenario combines a biomaterial separation process to the solid recovered fuels preparation and in the last scenario plastics are separated in addition to the previous operations. The results indicated that the mechanical treatment scenarios still need to overcome some problems to become feasible. Problems are related to profitability, residue disposal and technical reliability. Many uncertainties are also related to the data gathered over waste characteristics, technical performance and markets. With legislative support and development of further processing technologies and markets of the recycled materials the scenarios with biomaterial and plastic separation may operate feasibly in the future.

POLITICAL RISK IN FOREIGN DIRECT INVESTMENT IN THE RUSSIAN ELECTRIC POWER SECTOR

Russia approved ambitious reform plan for the electricity sector in 2001 including privatisation of the country’s huge thermal generation assets. So far the sector had suffered from power shortages, aging infrastructure, substantial electricity losses, and weak productivity and profitability numbers. There was obvious need for foreign investments and technologies. The reform was rather successful; the generation assets were privatised in auctions in 2007-2008 and three European energy companies, E.On, Enel and Fortum, invested in and obtained together over 10% of the Russian production assets. The novelty of these foreign investments serves unique object for the study. The political risk is involved in the FDI due to the industry’s social and economic importance. The research’s objective was to identify and analyse the political risk that foreign investors face in the Russian electricity sector. The research had qualitative study method and the empirical data was collected by interviewing. The research’s theoretical framework was based on the existing political risk theories and it focused to understand the Russian government in relation to the country’s stability and define both macro-level and micro-level sources of political risk for the foreign direct investments in the sector. The research concludes that the centralised and obscure political decision-making, economic constriction, high level of governmental control in economy and corruption form the country’s internal macro-level risk sources for the foreign investors in the sector. Additionally the retribution due to the companies’ home country actions, possible violent confrontations at the Russian borders and the currency instability are externally originated risk sources. In the electricity industry there is risk of tightened governmental control and increased regulation and taxation. Similarly the company-level risk sources link to the unreformed heating sector, bargaining with the authorities, diplomatic stress between host and home countries and to companies and government’s divergent perspective for the profit-making. The research stresses the foreign companies’ ability to cope with the characteristics of Russian political environment. In addition to frequent political and market risk assessment, the companies need to focus on currency protection against rouble’s rate fluctuation and actively build good company-citizenship in the country. Good relationship is needed with the Russian political authorities. The political risk identification and the research’s conclusive framework also enable political risk study assessments for other industries in Russia

Publikationsstatistik Okatalogiserat material 1991-

Vapaakappalekartuntaan perustuva tilasto Suomessa julkaistuista pienpainatteista, julisteista, toimintakertomuksista ja kunnallisista julkaisuista vuodesta 1991 lähtien. Pienpainatelehdet sisältyvät tilastoon vuodesta 2014 lähtien