Impact of precipitation on the water table level of different ombrotrophic raised bog complexes, central Estonia

Sadannan vaikutus vedenpinnan tasoon kohosuolla

Evaluation of success of mergers and acquisitions – Case Finnish forest companies

Tutkimuksen tavoitteena oli selvittää mitkä asiat vaikuttavat fuusioiden menestykseen, millaisia menetelmiä fuusioiden menestyksen mittaamiseen on ja mitä menetelmiä suomalaisessa metsäteollisuudessa käytetään ja kuinka systemaattista menestyksen mittaaminen on. Lisäksi arvioitiin kahden suomalaisen metsäteollisuuden fuusion kannattavuutta. Fuusioita koskevan kirjallisuuden perusteella luotiin haastattelurunko, jonka pohjalta saatiin suomalaisen metsäteollisuuden näkemys fuusioiden menestyksen mittaamisesta. Kirjallisuudessa esitettyjä menestyksen mittareita on osittain sovellettu laskentaosuudessa ja niiden avulla arvioitu fuusioiden kannattavuutta. Tärkeimmät fuusioihin vaikuttavat tekijät olivat haastattelujen perusteella toimialan konsolidoituminen ja yrityksen oma strategia. Fuusioiden menestyksen mittaaminen koettiin ongelmalliseksi, eikä mitään yhtenäistä käytäntöä ole. Stora Enson ja UPM-Kymmenen fuusioita voidaan pitää empiriaosuudessa esitettyjen laskelmien perusteella menestyksekkäinä.

Boosting Future Prospects or Softening Promises of Success? The Use of Emphatics and Hedging in the Letter to Shareholders Sections of Annual Reports

Tämä pro gradu -tutkielma käsittelee yritysten vuosikertomusten Toimitusjohtajan katsaus -osioissa esiintyvää metatekstiä. Erityisenä tutkimuskohteena ovat yrityksen tulevaisuutta käsittelevät lauseet ja niissä käytetty interpersonaalinen metateksti, jonka avulla kirjoittaja pyrkii joko vahvistamaan (emphatics-keinoin) tai heikentämään (hedging-keinoin) ilmaisujensa vahvuutta ja lukijalle niiden kautta välittyvää kuvaa viestin varmuudesta ja vakuuttavuudesta. Sijoittajille suunnattu Toimitusjohtajan katsaus käsittelee yleensä yrityksen edellisen vuoden tulosta, taloudellista asemaa sekä tulevaisuudennäkymiä. Tutkimuksen tarkoituksena oli selvittää, vaikuttaako yrityksen taloudellinen menestys vuosikertomuksen tässä osiossa käytetyn metatekstin määrään ja laatuun. Tutkimuksen teoriaosuudessa käsitellään ensiksi lyhyesti vuosikertomuksia ja niiden parissa tehtyä aiempaa kielitieteellistä tutkimusta, minkä jälkeen perehdytään tarkemmin metatekstin sekä hedging- ja emphatics-keinojen määrittelyyn. Näissä osioissa apuna toimivat muunmuassa Hylandin (1998) ja Cromptonin (1997) tutkimukset. Tutkimusaineistossa esiintyvien metatekstilajien määrittelyssä ja tunnistamisessa käytettiin apuna pääosin Crismore & Farnsworthin (1990) ja Grabe & Kaplanin (1997) tutkimuksia. Tutkimuksen aineistona oli yhteensä 23 yhdentoista amerikkalaisen yrityksen vuosikertomusta. Ne käsittivät esimerkkejä kunkin yhtiön talouden kannalta sekä erityisen hyviltä että huonoilta vuosilta. Aineistosta löydetty interpersonaalinen metateksti luokiteltiin viiteen eri ryhmään: modaaliverbit, hedging-verbit, muut hedging-keinot, emphatics-keinot ja evaluatives-keinot (eli kirjoittajan tekstistään tekemät subjektiiviset huomiot ja arviot). Tulokset osoittivat, että metatekstin käytössä ilmeni melkoista vaihtelua yksittäisten yritysten ja niiden hyvien ja huonojen vuosien välillä. Nämä eroavuudet eivät kuitenkaan vaikuttaneet merkittävästi koko aineiston kattaviin keskivertolukuihin, joiden avulla pyrittiin selvittämään hyvien ja huonojen vuosien välisiä yleisiä eroja. Tutkimuksen perusteella voidaan todeta, että Toimitusjohtajan katsaus –osioiden viittaukset yhtiön tulevaisuuteen heijastavat tavallisesti kirjoittajan varmuutta yrityksen menestyksekkäästä tulevaisuudesta riippumatta siitä, minkälainen vuosikertomuksessa käsitelty vuosi on ollut yhtiölle taloudellisesti. Yleisesti ottaen yhtiön taloudellisen tilan ei siis havaittu vaikuttavan Toimitusjohtajan katsauksessa käytetyn metadiskurssin määrään tai laatuun.

National Library and Library Network in Finland - Cooperation Being the Driving Force of Success

Kristiina Hormia-Poutasen esitys Danish Research Association -tapahtumassa Tanskassa 15.9.2011

Mathematical modeling of level of anaesthesia from EEG measurements

Problem of modeling of anaesthesia depth level is studied in this Master Thesis. It applies analysis of EEG signals with nonlinear dynamics theory and further classification of obtained values. The main stages of this study are the following: data preprocessing; calculation of optimal embedding parameters for phase space reconstruction; obtaining reconstructed phase portraits of each EEG signal; formation of the feature set to characterise obtained phase portraits; classification of four different anaesthesia levels basing on previously estimated features. Classification was performed with: Linear and quadratic Discriminant Analysis, k Nearest Neighbours method and online clustering. In addition, this work provides overview of existing approaches to anaesthesia depth monitoring, description of basic concepts of nonlinear dynamics theory used in this Master Thesis and comparative analysis of several different classification methods.

Microenterprise success and failure factors

The purpose of this study is to identify factors contributory to success or failure of a microenterprise. Microenterprise is an enterprise with less than10 employees. About 99 % of all Finnish enterprises fall in this category. Earlier studies do not provide a comprehensive view on microenterprise success and failure factors. The theoretical part discusses the definition of success and failure, previous research and results already established about the topic and categories of business environment. The empirical part is founded on quantitative survey results from 204 Finnish microenterprises. The questions of the survey were based on previous surveys, literature and intuition. Both success and failure factors were enquired. Summary of the results was made and the results were compared among successful and unsuccessful enterprises. In open-end questions, the most important factors mentioned to affect enterprise performance positively were "Employees", "Customers" and "Skills, knowledge, education and experience." The most important factors affecting enterprise performance negatively were "Economical situation", "Employees availability and attitudes" as well as "Political decisions and passed laws". In Likert-scale set of questions, the most significant factors from the point of view of enterprise performance were "Product and / or service good quality", "Good reputation of the company" and "Staff's strong skills". The least significant factors were "Effect of marketing and promotion", "Conflicts" and "Differences of points of views of different generations". By Likert-scale set of questions, it was also tested which operations the enterprises perform, and according to the results, successful enterprises found "Performing a market research", "Use of distribution channel in sales" and "Expanding to new markets" less important than unsuccessful enterprises. The tests proved that the age of the enterprise correlates with the level of success of the enterprise: The younger the enterprise, the more successful it is. In addition, the results show that if the enterprise is family based, the less successful it is. In addition, there was also slight correlation between success and the level of growth, indicating that higher the level of growth the more successful the enterprise is. From the business environment point of view, the key finding was that internal factors affect more on the success of an enterprise than external factors, and that external factors affect more on the failure of an enterprise than internal factors.

Feasibility of industrial implementation of laser cutting into paper making machine

Laser cutting implementation possibilities into paper making machine was studied as the main objective of the work. Laser cutting technology application was considered as a replacement tool for conventional cutting methods used in paper making machines for longitudinal cutting such as edge trimming at different paper making process and tambour roll slitting. Laser cutting of paper was tested in 70’s for the first time. Since then, laser cutting and processing has been applied for paper materials with different level of success in industry. Laser cutting can be employed for longitudinal cutting of paper web in machine direction. The most common conventional cutting methods include water jet cutting and rotating slitting blades applied in paper making machines. Cutting with CO2 laser fulfils basic requirements for cutting quality, applicability to material and cutting speeds in all locations where longitudinal cutting is needed. Literature review provided description of advantages, disadvantages and challenges of laser technology when it was applied for cutting of paper material with particular attention to cutting of moving paper web. Based on studied laser cutting capabilities and problem definition of conventional cutting technologies, preliminary selection of the most promising application area was carried out. Laser cutting (trimming) of paper web edges in wet end was estimated to be the most promising area where it can be implemented. This assumption was made on the basis of rate of web breaks occurrence. It was found that up to 64 % of total number of web breaks occurred in wet end, particularly in location of so called open draws where paper web was transferred unsupported by wire or felt. Distribution of web breaks in machine cross direction revealed that defects of paper web edge was the main reason of tearing initiation and consequent web break. The assumption was made that laser cutting was capable of improvement of laser cut edge tensile strength due to high cutting quality and sealing effect of the edge after laser cutting. Studies of laser ablation of cellulose supported this claim. Linear energy needed for cutting was calculated with regard to paper web properties in intended laser cutting location. Calculated linear cutting energy was verified with series of laser cutting. Practically obtained laser energy needed for cutting deviated from calculated values. This could be explained by difference in heat transfer via radiation in laser cutting and different absorption characteristics of dry and moist paper material. Laser cut samples (both dry and moist (dry matter content about 25-40%)) were tested for strength properties. It was shown that tensile strength and strain break of laser cut samples are similar to corresponding values of non-laser cut samples. Chosen method, however, did not address tensile strength of laser cut edge in particular. Thus, the assumption of improving strength properties with laser cutting was not fully proved. Laser cutting effect on possible pollution of mill broke (recycling of trimmed edge) was carried out. Laser cut samples (both dry and moist) were tested on the content of dirt particles. The tests revealed that accumulation of dust particles on the surface of moist samples can take place. This has to be taken into account to prevent contamination of pulp suspension when trim waste is recycled. Material loss due to evaporation during laser cutting and amount of solid residues after cutting were evaluated. Edge trimming with laser would result in 0.25 kg/h of solid residues and 2.5 kg/h of lost material due to evaporation. Schemes of laser cutting implementation and needed laser equipment were discussed. Generally, laser cutting system would require two laser sources (one laser source for each cutting zone), set of beam transfer and focusing optics and cutting heads. In order to increase reliability of system, it was suggested that each laser source would have double capacity. That would allow to perform cutting employing one laser source working at full capacity for both cutting zones. Laser technology is in required level at the moment and do not require additional development. Moreover, capacity of speed increase is high due to availability high power laser sources what can support the tendency of speed increase of paper making machines. Laser cutting system would require special roll to maintain cutting. The scheme of such roll was proposed as well as roll integration into paper making machine. Laser cutting can be done in location of central roll in press section, before so-called open draw where many web breaks occur, where it has potential to improve runability of a paper making machine. Economic performance of laser cutting was done as comparison of laser cutting system and water jet cutting working in the same conditions. It was revealed that laser cutting would still be about two times more expensive compared to water jet cutting. This is mainly due to high investment cost of laser equipment and poor energy efficiency of CO2 lasers. Another factor is that laser cutting causes material loss due to evaporation whereas water jet cutting almost does not cause material loss. Despite difficulties of laser cutting implementation in paper making machine, its implementation can be beneficial. The crucial role in that is possibility to improve cut edge strength properties and consequently reduce number of web breaks. Capacity of laser cutting to maintain cutting speeds which exceed current speeds of paper making machines what is another argument to consider laser cutting technology in design of new high speed paper making machines.

A Drop of Success – Internationalization Readiness of a Young Finnish Company

This study analyzes a young Finnish micro-sized firm that is attempting to reach internationalization readiness in the pre-internationalization stage. The purpose of this research is to analyze and better understand how a young firm reaches internationalization readiness in the pre-internationalization stage. Small firm internationalization is a vastly researched topic. Little emphasis has been placed on the specific antecedents that help the firm reach internationalization readiness in the pre-internationalization stage. The contribution of this research is thus two-fold. First, the research contributes to known theories of firm internationalization. Second, the research further extends knowledge related to how firms reach internationalization readiness specifically in the pre-internationalization stage. The theoretical background of the research involves the traditional stage theory (Uppsala model), pre-internationalization stage theory, international entrepreneurship theory and dynamic capabilities theory. With the help of these four relevant theories, empirical data was collected. The research method utilized in this study was a qualitative single case study combined with critical realist philosophy. The data analysis of this research was conducted using abduction in order to allow freedom in the analysis of the research findings. The empirical data was collected through semi-structured, face-to-face interviews. The key respondents in this study were the two managers of the case company. The findings of this study revealed four important themes from the case company’s perspective towards reaching internationalization readiness in the pre-internationalization stage. Extensive knowledge of the home market and target market were the two most important themes in this research. The next most relevant theme for reaching internationalization readiness in the pre-internationalization stage was the managers’ previous international business experiences. The final theme affecting the firm’s ability to reach internationalization readiness was the firm’s specific resources. Even though the research findings of this study are case sensitive, the research insights and explanations have the potential to be transferred to similar firms and contexts. Future research should therefore aim towards more longitudinal studies in which the context is emphasized. This should include a variety of firms in similar stages of internationalization and contexts. Future studies of this kind would be of great benefit to academia.

The effects of productivity on profitability: a case study at firm level using an activity-based costing approach

Productivity and profitability are important concepts and measures describing the performance and success of a firm. We know that increase in productivity decreases the costs per unit produced and leads to better profitability. This common knowledge is not, however, enough in the modern business environment. Productivity improvement is one means among others for increasing the profitability of actions. There are many means to increase productivity. The use of these means presupposes operative decisions and these decisions presuppose informationabout the effects of these means. Productivity improvement actions are in general made at floor level with machines, cells, activities and human beings. Profitability is most meaningful at the level of the whole firm. It has been very difficult or even impossible to analyze closely enough the economical aspects of thechanges at floor level with the traditional costing systems. New ideas in accounting have only recently brought in elements which make it possible to considerthese phenomena where they actually happen. The aim of this study is to supportthe selection of objects to productivity improvement, and to develop a method to analyze the effects of the productivity change in an activity on the profitability of a firm. A framework for systemizing the economical management of productivity improvement is developed in this study. This framework is a systematical way with two stages to analyze the effects of productivity improvement actions inan activity on the profitability of a firm. At the first stage of the framework, a simple selection method which is based on the worth, possibility and the necessity of the improvement actions in each activity is presented. This method is called Urgency Analysis. In the second stage it is analyzed how much a certain change of productivity in an activity affects the profitability of a firm. A theoretical calculation model with which it is possible to analyze the effects of a productivity improvement in monetary values is presented. On the basis of this theoretical model a tool is made for the analysis at the firm level. The usefulness of this framework was empirically tested with the data of the profit center of one medium size Finnish firm which operates in metal industry. It is expressedthat the framework provides valuable information about the economical effects of productivity improvement for supporting the management in their decision making.

Success factors of customer and supplier master data system

Especially in global enterprises, key data is fragmented in multiple Enterprise Resource Planning (ERP) systems. Thus the data is inconsistent, fragmented and redundant across the various systems. Master Data Management (MDM) is a concept, which creates cross-references between customers, suppliers and business units, and enables corporate hierarchies and structures. The overall goal for MDM is the ability to create an enterprise-wide consistent data model, which enables analyzing and reporting customer and supplier data. The goal of the study was defining the properties and success factors of a master data system. The theoretical background was based on literature and the case consisted of enterprise specific needs and demands. The theoretical part presents the concept, background, and principles of MDM and then the phases of system planning and implementation project. Case consists of background, definition of as is situation, definition of project, evaluation criterions and concludes the key results of the thesis. In the end chapter Conclusions combines common principles with the results of the case. The case part ended up dividing important factors of the system in success factors, technical requirements and business benefits. To clarify the project and find funding for the project, business benefits have to be defined and the realization has to be monitored. The thesis found out six success factors for the MDM system: Well defined business case, data management and monitoring, data models and structures defined and maintained, customer and supplier data governance, delivery and quality, commitment, and continuous communication with business. Technical requirements emerged several times during the thesis and therefore those can’t be ignored in the project. Conclusions chapter goes through these factors on a general level. The success factors and technical requirements are related to the essentials of MDM: Governance, Action and Quality. This chapter could be used as guidance in a master data management project.

The Role of a firm’s mindset in international success - case study of Finnish marine industry firms

This thesis investigates the influence of a firm’s mindset on international success in the context of the Finnish marine industry. The study draws theoretical wisdom from organisational behaviour and strategic management literatures. The research aim set for this study was to identify and categorise existing strategic types based on mindsets found in the marine industry SMEs, and to link the influence of mindsets with success by examining the role of mindsets in a firm’s performance. Mindsets of firms were conceptualised as aggregate collections of perceptions that influence how the surrounding environment is discerned by the members of the firm. Mindsets are idiosyncratic to firms and therefore important firm-specific resources which influence decision-making and can be observed through the strategic behaviour of firms. Qualitative case study method was applied which was further supported by quantitative data on the financial performance of the ten case firms. Taxonomy based on the dimension of mindsets and prediction was developed to demonstrate four ideal types of firms identified within the marine industry. It was found that all of the case firms emphasised adaptation in their strategy while planning was emphasised to a varying degree. Moreover, two different methods of adapting were found; proactive and reactive. Firms which plan in the long-term and adapt proactively constantly investigate whether their plans are synchronous with the realities of the market; by having an open mindset, a firm’s perception of the reality of the market is enabling the firm to develop value creating strategies which are superiorly informed.This finding was supported by the financial data and led to the proposition that having an open mindset and placing a high level of emphasis on prediction may have a positive influence on international success. Also, it was proposed that concentrating only on exploiting business opportunities in the present time and not exploring any addition opportunities can have a negative influence on the firm’s performance, even if the mindset of the firm is open.

Project Success through Effective Decisions: Case Studies on Project Goal Setting, Success Evaluation and Managerial Decision Making

The objective of the thesis is to structure and model the factors that contribute to and can be used in evaluating project success. The purpose of this thesis is to enhance the understanding of three research topics. The goal setting process, success evaluation and decision-making process are studied in the context of a project, business unitand its business environment. To achieve the objective three research questionsare posed. These are 1) how to set measurable project goals, 2) how to evaluateproject success and 3) how to affect project success with managerial decisions.The main theoretical contribution comes from deriving a synthesis of these research topics which have mostly been discussed apart from each other in prior research. The research strategy of the study has features from at least the constructive, nomothetical, and decision-oriented research approaches. This strategy guides the theoretical and empirical part of the study. Relevant concepts and a framework are composed on the basis of the prior research contributions within the problem area. A literature review is used to derive constructs of factors withinthe framework. They are related to project goal setting, success evaluation, and decision making. On the basis of this, the case study method is applied to complement the framework. The empirical data includes one product development program, three construction projects, as well as one organization development, hardware/software, and marketing project in their contexts. In two of the case studiesthe analytic hierarchy process is used to formulate a hierarchical model that returns a numerical evaluation of the degree of project success. It has its origin in the solution idea which in turn has its foundation in the notion of projectsuccess. The achieved results are condensed in the form of a process model thatintegrates project goal setting, success evaluation and decision making. The process of project goal setting is analysed as a part of an open system that includes a project, the business unit and its competitive environment. Four main constructs of factors are suggested. First, the project characteristics and requirements are clarified. The second and the third construct comprise the components of client/market segment attractiveness and sources of competitive advantage. Together they determine the competitive position of a business unit. Fourth, the relevant goals and the situation of a business unit are clarified to stress their contribution to the project goals. Empirical evidence is gained on the exploitation of increased knowledge and on the reaction to changes in the business environment during a project to ensure project success. The relevance of a successful project to a company or a business unit tends to increase the higher the reference level of project goals is set. However, normal performance or sometimes performance below this normal level is intentionally accepted. Success measures make project success quantifiable. There are result-oriented, process-oriented and resource-oriented success measures. The study also links result measurements to enablers that portray the key processes. The success measures can be classified into success domains determining the areas on which success is assessed. Empiricalevidence is gained on six success domains: strategy, project implementation, product, stakeholder relationships, learning situation and company functions. However, some project goals, like safety, can be assessed using success measures that belong to two success domains. For example a safety index is used for assessing occupational safety during a project, which is related to project implementation. Product safety requirements, in turn, are connected to the product characteristics and thus to the product-related success domain. Strategic success measures can be used to weave the project phases together. Empirical evidence on their static nature is gained. In order-oriented projects the project phases are oftencontractually divided into different suppliers or contractors. A project from the supplier's perspective can represent only a part of the ¿whole project¿ viewed from the client's perspective. Therefore static success measures are mostly used within the contractually agreed project scope and duration. Proof is also acquired on the dynamic use of operational success measures. They help to focus on the key issues during each project phase. Furthermore, it is shown that the original success domains and success measures, their weights and target values can change dynamically. New success measures can replace the old ones to correspond better with the emphasis of the particular project phase. This adjustment concentrates on the key decision milestones. As a conclusion, the study suggests a combination of static and dynamic success measures. Their linkage to an incentive system can make the project management proactive, enable fast feedback and enhancethe motivation of the personnel. It is argued that the sequence of effective decisions is closely linked to the dynamic control of project success. According to the used definition, effective decisions aim at adequate decision quality and decision implementation. The findings support that project managers construct and use a chain of key decision milestones to evaluate and affect success during aproject. These milestones can be seen as a part of the business processes. Different managers prioritise the key decision milestones to a varying degree. Divergent managerial perspectives, power, responsibilities and involvement during a project offer some explanation for this. Finally, the study introduces the use ofHard Gate and Soft Gate decision milestones. The managers may use the former milestones to provide decision support on result measurements and ad hoc critical conditions. In the latter milestones they may make intermediate success evaluation also on the basis of other types of success measures, like process and resource measures.

Use of scenario analysis in studying emerging technology – Case Grid computing

Tutkimuksen selvitettiin miten skenaarioanalyysia voidaan käyttää uuden teknologian tutkimisessa. Työssä havaittiin, että skenaarioanalyysin soveltuvuuteen vaikuttaa eniten teknologisen muutoksen taso ja saatavilla olevan tiedon luonne. Skenaariomenetelmä soveltuu hyvin uusien teknologioiden tutkimukseen erityisesti radikaalien innovaatioiden kohdalla. Syynä tähän on niihin liittyvä suuri epävarmuus, kompleksisuus ja vallitsevan paradigman muuttuminen, joiden takia useat muut tulevaisuuden tutkimuksen menetelmät eivät ole tilanteessa käyttökelpoisia. Työn empiirisessä osiossa tutkittiin hilaverkkoteknologian tulevaisuutta skenaarioanalyysin avulla. Hilaverkot nähtiin mahdollisena disruptiivisena teknologiana, joka radikaalina innovaationa saattaa muuttaa tietokonelaskennan nykyisestä tuotepohjaisesta laskentakapasiteetin ostamisesta palvelupohjaiseksi. Tällä olisi suuri vaikutus koko nykyiseen ICT-toimialaan erityisesti tarvelaskennan hyödyntämisen ansiosta. Tutkimus tarkasteli kehitystä vuoteen 2010 asti. Teorian ja olemassa olevan tiedon perusteella muodostettiin vahvaan asiantuntijatietouteen nojautuen neljä mahdollista ympäristöskenaariota hilaverkoille. Skenaarioista huomattiin, että teknologian kaupallinen menestys on vielä monen haasteen takana. Erityisesti luottamus ja lisäarvon synnyttäminen nousivat tärkeimmiksi hilaverkkojen tulevaisuutta ohjaaviksi tekijöiksi.

Re-examination of Customer Satisfaction Measurement Results

Asiakastyytyväisyys on läheisesti yhteydessä yrityksen taloudelliseen menestykseen ja yrityksen yleisen laadun määrittämiseen. Asiakastyytyväisyyden mittaamista vaaditaan tällä hetkellä myös ISO 9001 laatujärjestelmästandardissa. Tämän vuoksi tarve tutkia ja mitata asiakastyytyväisyyttä on kasvanut yritysten ja yhteisöjen joukossa. Kokonaisvaltainen asiakastyytyväisyyden tutkiminen sisältää sekä asiakastyytyväisyyden mittaamista ja järjestelmällistä asiakaspalautteen tutkimista ja analysointia. Asiakastyytyväisyysmittaamisessa käytetään menettelytapoja ja tekniikoita, jotka ovat yleisesti käytössä markkinointitutkimuksessa. Menetelmiä on kuitenkin mukautettava, jotta ne sopivat asiakastyytyväisyyden mittaamiseksi. Asiakastyytyväisyysmittaustulosten perusanalyysit ovat helppo toteuttaa mutta tulokset voidaan helposti tulkita väärin ilman syvällisempiä tilastomatemaattisia analyysejä. Asiakastyytyväisyyden mittaaminen on helppo toteuttaa mutta tutkimussuunnitelma ja tulostenkeräysmenetelmä pitää suunnitella huolellisesti, jotta mittaustulosten luotettavuus ja validiteetti voidaan taata. Jotta asiakastyytyväisyyden tutkimisesta saataisiin maksimaalinen hyöty, pitäisi tutkimuksen myös tarkastella kuinka asiakastyytyväisyys, yrityksen sisäinen ja ulkoinen laatu sekä asiakaslojaalisuus ovat yhteydessä toisiinsa.