Iowa Crime Rate Comparisons Report, Iowa Department of Public Safety,1999

This report describes how Iowa compares to other states in the nation. To promote consistency, the Iowa totals and the other states’ information have been taken entirely from the FBI’s national publication called Crime in the United States; 1999. The Iowa information in Crime in the United States; 1999 is based upon actual summary totals for selected reporting jurisdictions and produced by the U.S. Department of Justice, F.B.I. These Iowa totals cannot be compared to the 1999 Incident-Based Iowa Uniform Crime Reports, which are based on actual totals for all reporting Iowa law enforcement jurisdictions.

Iowa Crime Rate Comparisons Report, 2000

This report describes how Iowa compares to other states in the nation. To promote consistency, the Iowa totals and the other states’ information have been taken entirely from the FBI’s national publication called Crime in the United States; 2000. The Iowa information in Crime in the United States; 2000 is based upon actual summary totals for selected reporting jurisdictions and produced by the U.S. Department of Justice, F.B.I. These Iowa totals cannot be compared to the 2000 Incident-Based Iowa Uniform Crime reports, which are based on actual totals for all reporting Iowa law enforcement jurisdictions.

Iowa Crime Rate Comparisons Report, Iowa Department of Public Safety, 2001

This report describes how Iowa compares to other states in the nation. To promote consistency, the Iowa totals and the other states’ information have been taken entirely from the FBI’s national publication called Crime in the United States; 2001. The Iowa information in Crime in the United States; 2001 is based upon actual summary totals for selected reporting jurisdictions and produced by the U.S. Department of Justice, F.B.I. These Iowa totals cannot be compared to the 2001 Incident-Based Iowa Uniform Crime Reports, which are based on actual totals for all reporting Iowa law enforcement jurisdictions.

Iowa Crime Rate Comparisons Report, Iowa Department of Public Safety,1998

This report describes how Iowa compares to other states in the nation. To promote consistency, the Iowa totals and the other states’ information have been taken entirely from the FBI’s national publication called Crime in the United States; 1998. The Iowa information in Crime in the United States; 1998 is based upon actual summary totals for selected reporting jurisdictions and produced by the U.S. Department of Justice, F.B.I. These Iowa totals cannot be compared to the 1998 Incident-Based Iowa Uniform Crime Reports which are based on actual totals for all reporting Iowa law enforcement jurisdictions.

Concepts and Rationale for Regional Nitrogen Rate Guidelines for Corn, April 2006

Nitrogen (N) is typically one of the largest corn fertilization expenses. Nitrogen application is critical because it signifi cantly improves corn yield in many crop rotations. When choosing N rates, producers need to carefully consider both achieving most profi table economic return and advancing environmental stewardship. In 2004, university agronomists from the Corn Belt states began discussions regarding N rate use for corn production. The reasons for the discussions centered on apparent differences in methods for determining N rates across states, misperceptions regarding N rate guidelines, and concerns about application rates as corn yields have climbed to historic levels. An outcome of those discussions was an effort with the objectives to: ▪ develop N rate guidelines that could be applicable on a regional basis and ▪ identify the most profi table fertilizer N rates for corn production across the Corn Belt. This publication provides an overview of corn N fertilization in regard to rate of application, investigates concepts for determining economic application rates, and describes a suggested regional approach for developing corn N rate guidelines directly from recent research data.

The Effects of Headcut and Knickpoint Propagation on Bridges in Iowa, October 2008

Headcuts (known also as primary knickpoints) and knickpoints (known also as secondary knickpoints) have been found to contribute to the accelerated riverbed degradation problem in the midwestern United States. Step-changes that occur at the head of channel networks are referred to as headcuts, and those that occur within the confines of channel banks are referred to as knickpoints. The formation of headcuts and knickpoints and their upstream migration have been linked to the over-steepening of stream reaches when the flow plunges to the bed and creates a plunge pool. Secondary flow currents and seepage are believed to be some other parameters contributing to the formation and evolution of headcuts and knickpoints. Ongoing research suggests that headcuts and knickpoints, where they form and migrate, may account for 60% (or more) of the bed erosion in the streams. Based on preliminary observations, there is a strong indication that headcuts and knickpoints can also have a greater influence on flow thalweg alignment (line of deepest flow) for small rivers. A shift in thalweg toward a riverbank or embankment is usually a prime factor contributing to riverbank erosion and scour.

Prison Return Rate Down, Data Download, Iowa Department of Corrections, October 2010

The Iowa Department of Corrections has set a goal to reduce the rate of return to prison – whether due to new convictions or technical violations – to 33.3%. Preliminary findings show that that goal has been achieved for FY 07 releasees, with recidivism rates the lowest among the three years studied.

Prison Return Rate Down, Data Download, Iowa Department of Corrections, October 2010

The Iowa Department of Corrections has set a goal to reduce the rate of return to prison – whether due to new convictions or technical violations – to 33.3%. Preliminary findings show that that goal has been achieved for FY 07 releasees, with recidivism rates the lowest among the three years studied.

Prison Return Rate Down-Again, Data Download, Department of Corrections

One of the key statistics that Iowa Corrections maintains to measure the success of our efforts is the three-year return-to-prison rate for offenders leaving prison and reentering the community. As the chart below shows, the rate for the three-year period from FY 2009 through FY 2012 is the lowest since this measure has been calculated.

Issue review : impact on the insurance premium tax rate reduction .

In 2002, Senate File 2318, Insurance Premium Tax Reduction Act, the Iowa General Assembly approved a reduction in the insurance premium tax rate from 2 percent to 1 percent. The reduction was phased in at the rate of 1/4 percent annual increments over a five-year period, beginning with life and health insurance policy payments made on or after January 1st, 2003. Calendar year 2007 was the first year all premiums were taxed at 1 percent and fiscal year 2008 was the first full fiscal year at the 1 percent rate. Insurance premiums tax is paid only by insurance companies. The companies that benefit from the tax reduction are uniquely identified in government employment statistics. This allows for a unique opportunity to evaluate both the revenue impact and the employment impact of the tax rate reduction in Senate File 2318. This issue review focuses on the General Fund revenue impact of the rate reduction and the Iowa employment trends for the insurance industry since the rate reduction legislation was approved.

Improving Portland Cement Concrete Mix Consistency and Production Rate through Two-Stage Mixing, TR-505, 2007

A two-stage mixing process for concrete involves mixing a slurry of cementitious materials and water, then adding the slurry to coarse and fine aggregate to form concrete. Some research has indicated that this process might facilitate dispersion of cementitious materials and improve cement hydration, the characteristics of the interfacial transition zone (ITZ) between aggregate and paste, and concrete homogeneity. The goal of the study was to find optimal mixing procedures for production of a homogeneous and workable mixture and quality concrete using a two-stage mixing operation. The specific objectives of the study are as follows: (1) To achieve optimal mixing energy and time for a homogeneous cementitious material, (2) To characterize the homogeneity and flow property of the pastes, (3) To investigate effective methods for coating aggregate particles with cement slurry, (4) To study the effect of the two-stage mixing procedure on concrete properties, (5) To obtain the improved production rates. Parameters measured for Phase I included: heat of hydration, maturity, and rheology tests were performed on the fresh paste samples, and compressive strength, degree of hydration, and scanning electron microscope (SEM) imaging tests were conducted on the cured specimens. For Phases II and III tests included slump and air content on fresh concrete and compressive and tensile strengths, rapid air void analysis, and rapid chloride permeability on hardened concrete.

The Effects of Headcut and Knickpoint Propagation on Bridges in Iowa, TR-541, 2008

The overarching goal of the proposed research was to provide a predictive tool for knickpoint propagation within the HCA (Hungry Canyon Alliance) territory. Knickpoints threaten the stability of bridge structures in Western Iowa. The study involved detailed field investigations over two years in order to monitor the upstream migration of a knickpoint on Mud Creek in Mills County, IA and identify the key mechanisms triggering knickpoint propagation. A state-of-the-art laser level system mounted on a movable truss provided continuous measurements of the knickpoint front for different flow conditions. A pressure transducer found in proximity of the truss provided simultaneous measurements of the flow depth. The laser and pressure transducer measurements led to the identification of the conditions at which the knickpoint migration commences. It was suggested that negative pressures developed by the reverse roller flow near the toe of the knickpoint face triggered undercutting of the knickpoint at this location. The pressure differential between the negative pressure and the atmospheric pressure also draws the impinging jet closer to the knickpoint face producing scour. In addition, the pressure differential may induce suction of sediment from the face. Other contributing factors include slump failure, seepage effects, and local fluvial erosion due to the exerted fluid shear. The prevailing flow conditions and soil information along with the channel cross-sectional geometry and gradient were used as inputs to a transcritical, one dimensional, hydraulic/geomorphic numerical model, which was used to map the flow characteristics and shear stress conditions near the knickpoint. Such detailed flow calculations do not exist in the published literature. The coupling of field and modeling work resulted in the development of a blueprint methodology, which can be adopted in different parts of the country for evaluating knickpoint evolution. This information will assist local government agencies in better understanding the principal factors that cause knickpoint propagation and help estimate the needed response time to control the propagation of a knickpoint after one has been identified.

Comparison of Setting Time Measured Using Ultrasonic Wave Propagation with Saw-Cutting Times on Pavements, TR-675, 2015

At present, there is little fundamental guidance available to assist contractors in choosing when to schedule saw cuts on joints. To conduct pavement finishing and sawing activities effectively, however, contractors need to know when a concrete mixture is going to reach initial set, or when the sawing window will open. Previous research investigated the use of the ultrasonic pulse velocity (UPV) method to predict the saw-cutting window for early entry sawing. The results indicated that the method has the potential to provide effective guidance to contractors as to when to conduct early entry sawing. The aim of this project was to conduct similar work to observe the correlation between initial setting and conventional sawing time. Sixteen construction sites were visited in Minnesota and Missouri over a two-year period. At each site, initial set was determined using a p-wave propagation technique with a commercial device. Calorimetric data were collected using a commercial semi-adiabatic device at a majority of the sites. Concrete samples were collected in front of the paver and tested using both methods with equipment that was set up next to the pavement during paving. The data collected revealed that the UPV method looks promising for early entry and conventional sawing in the field, both early entry and conventional sawing times can be predicted for the range of mixtures tested.